All of lore.kernel.org
 help / color / mirror / Atom feed
From: Albert Lee <albertcc@tw.ibm.com>
To: Jeff Garzik <jeff@garzik.org>
Cc: Tejun Heo <htejun@gmail.com>,
	Linux IDE <linux-ide@vger.kernel.org>,
	Doug Maxey <dwm@enoyolf.org>,
	bzolnier@gmail.com, Alan Cox <alan@lxorguk.ukuu.org.uk>,
	Mark Lord <liml@rtr.ca>
Subject: [PATCH] libata: disable_irq() during polling IDENTIFY (take 2)
Date: Tue, 08 May 2007 19:30:24 +0800	[thread overview]
Message-ID: <46405F50.5090901@tw.ibm.com> (raw)
In-Reply-To: <463F1509.30100@gmail.com>

Problem:
  Kernel got "irq 5: nobody cared" when using
  libata + polling IDENTIFY + Promise 20275 adapter + Benq DW1620 drive.

  Detail message available in bug 8441 (http://bugzilla.kernel.org/show_bug.cgi?id=8441).

Cause:
  The Benq DW1620 drive raises INTRQ during polling IDENTIFY PACKET DEVICE, 
  even if nIEN = 1.

Proposed fix:
  Ack the possibly unexpected irq in ata_interrupt().

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
---
Patch revised per Tejun's advice to ack the unexpected INTRQ in ata_interrupt().
Also, ap->lock is held when transfering PIO data from/to the port in case the
device doesn't like the status register to be read during data transfer.

Patch against 2.6.21.1 for your review, thanks.

diff -Nrup linux-2.6.21.1-ori/drivers/ata/libata-core.c linux-2.6.21.1-mod6/drivers/ata/libata-core.c
--- linux-2.6.21.1-ori/drivers/ata/libata-core.c	2007-05-04 11:22:23.000000000 +0800
+++ linux-2.6.21.1-mod6/drivers/ata/libata-core.c	2007-05-08 19:25:58.000000000 +0800
@@ -4490,8 +4490,17 @@ fsm_start:
 				goto fsm_start;
 			}
 
+			/* prevent ata_interrupt() from reading
+			 * status when transfering data for safty
+			 */
+			if (in_wq)
+				spin_lock_irqsave(ap->lock, flags);
+
 			atapi_pio_bytes(qc);
 
+			if (in_wq)
+				spin_unlock_irqrestore(ap->lock, flags);
+
 			if (unlikely(ap->hsm_task_state == HSM_ST_ERR))
 				/* bad ireason reported by device */
 				goto fsm_start;
@@ -4529,12 +4538,21 @@ fsm_start:
 				/* data might be corrputed */
 				qc->err_mask |= AC_ERR_DEV;
 
+				/* prevent ata_interrupt() from reading
+				 * status when transfering data for safty
+				 */
+				if (in_wq)
+					spin_lock_irqsave(ap->lock, flags);
+
 				if (!(qc->tf.flags & ATA_TFLAG_WRITE)) {
 					ata_pio_sectors(qc);
 					ata_altstatus(ap);
 					status = ata_wait_idle(ap);
 				}
 
+				if (in_wq)
+					spin_unlock_irqrestore(ap->lock, flags);
+
 				if (status & (ATA_BUSY | ATA_DRQ))
 					qc->err_mask |= AC_ERR_HSM;
 
@@ -4546,8 +4564,17 @@ fsm_start:
 				goto fsm_start;
 			}
 
+			/* prevent ata_interrupt() from reading status
+			 * when transfering data for safty
+			 */
+			if (in_wq)
+				spin_lock_irqsave(ap->lock, flags);
+
 			ata_pio_sectors(qc);
 
+			if (in_wq)
+				spin_unlock_irqrestore(ap->lock, flags);
+
 			if (ap->hsm_task_state == HSM_ST_LAST &&
 			    (!(qc->tf.flags & ATA_TFLAG_WRITE))) {
 				/* all data read */
@@ -5227,6 +5254,9 @@ irqreturn_t ata_interrupt (int irq, void
 			if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) &&
 			    (qc->flags & ATA_QCFLAG_ACTIVE))
 				handled |= ata_host_intr(ap, qc);
+			else
+				/* ack possibly unexpected irq */
+				ata_chk_status(ap);
 		}
 	}
 



  reply	other threads:[~2007-05-08 11:30 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-05-07  4:30 [PATCH] libata: disable_irq() during polling IDENTIFY Albert Lee
2007-05-07  7:43 ` Tejun Heo
2007-05-07 11:18   ` Alan Cox
2007-05-07 11:32     ` Tejun Heo
2007-05-08 13:36       ` Mark Lord
2007-05-07 11:19   ` Albert Lee
2007-05-07 11:29     ` Tejun Heo
2007-05-07 11:54       ` Albert Lee
2007-05-07 12:01         ` Tejun Heo
2007-05-08 11:30           ` Albert Lee [this message]
2007-05-08 11:41             ` [PATCH] libata: disable_irq() during polling IDENTIFY (take 2) Tejun Heo
2007-05-08 12:00             ` Alan Cox
2007-05-08 12:01               ` Tejun Heo
2007-05-08 12:20                 ` Alan Cox
2007-05-08 12:27                   ` Tejun Heo
2007-05-08 12:43                     ` Alan Cox
2007-05-08 12:45                       ` Tejun Heo
2007-05-08 12:45                     ` Alan Cox
2007-05-08 12:57                       ` Tejun Heo
2007-05-08 14:59                         ` Albert Lee
2007-05-08 15:16                         ` Jeff Garzik
2007-05-11  7:20                         ` [PATCH/RFC 0/7] libata: push part of irq driven pio to workqueue Albert Lee
2007-05-11  7:24                           ` [PATCH 1/7] libata: set the state after "PIO data-in" to HSM_ST_IDLE instead of HSM_ST_LAST Albert Lee
2007-05-11  7:28                           ` [PATCH 2/7] libata: move the ata_altstatus() in ata_hsm_qc_complete() Albert Lee
2007-05-11  7:30                           ` [PATCH 3/7] libata: move ata_altstatus() out to the pio data xfer functions Albert Lee
2007-05-11  7:31                           ` [PATCH 4/7] libata: move polling idle irq check to ata_host_intr() Albert Lee
2007-05-11 14:27                             ` Tejun Heo
2007-05-11 15:25                               ` Albert Lee
2007-05-11  7:35                           ` [PATCH 5/7] libata: move and reduce locking to the pio data xfer functions Albert Lee
2007-05-11 14:37                             ` Tejun Heo
2007-05-11 14:55                               ` Alan Cox
2007-05-11 14:57                                 ` Tejun Heo
2007-05-11 15:12                                   ` Alan Cox
2007-05-11 15:14                                     ` Tejun Heo
2007-05-11 15:24                                       ` Alan Cox
2007-05-11 15:39                                       ` Alan Cox
2007-05-11 16:59                                         ` Tejun Heo
2007-05-11 17:46                                           ` Alan Cox
2007-05-11 17:53                                             ` Tejun Heo
2007-05-11 22:00                                               ` Alan Cox
2007-05-14  8:24                                                 ` Tejun Heo
2007-05-14 11:29                                                   ` Alan Cox
2007-05-11 15:48                               ` Albert Lee
2007-05-11 17:06                                 ` Tejun Heo
2007-05-11 17:38                                   ` Alan Cox
2007-05-11 17:42                                     ` Tejun Heo
2007-05-11 17:07                                 ` Tejun Heo
2007-05-11  7:37                           ` [PATCH 6/7] libata: push part of the irq driven pio out to workqueue Albert Lee
2007-05-11  7:41                           ` [PATCH 7/7] libata: ack unexpected INTRQ when polling Albert Lee
2007-05-07 14:28         ` [PATCH] libata: disable_irq() during polling IDENTIFY Alan Cox
2007-05-08 13:42           ` Mark Lord
2007-05-08 13:57             ` Alan Cox

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=46405F50.5090901@tw.ibm.com \
    --to=albertcc@tw.ibm.com \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=albertl@mail.com \
    --cc=bzolnier@gmail.com \
    --cc=dwm@enoyolf.org \
    --cc=htejun@gmail.com \
    --cc=jeff@garzik.org \
    --cc=liml@rtr.ca \
    --cc=linux-ide@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.