All of lore.kernel.org
 help / color / mirror / Atom feed
From: Albert Lee <albertcc@tw.ibm.com>
To: Jeff Garzik <jeff@garzik.org>
Cc: Tejun Heo <htejun@gmail.com>, Alan Cox <alan@lxorguk.ukuu.org.uk>,
	Linux IDE <linux-ide@vger.kernel.org>,
	Doug Maxey <dwm@enoyolf.org>,
	bzolnier@gmail.com, Mark Lord <liml@rtr.ca>
Subject: [PATCH 6/7] libata: push part of the irq driven pio out to workqueue
Date: Fri, 11 May 2007 15:37:57 +0800	[thread overview]
Message-ID: <46441D55.20507@tw.ibm.com> (raw)
In-Reply-To: <4644192A.8090809@tw.ibm.com>

patch 6/7:
 Push part of the irq driven pio out to workqueue.

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
---
It seems this creates new race condition with ata_exec_internal_sg() and EH?

diff -Nrup 05_narrow_lock/drivers/ata/libata-core.c 06_irq_wq/drivers/ata/libata-core.c
--- 05_narrow_lock/drivers/ata/libata-core.c	2007-05-11 11:46:41.000000000 +0800
+++ 06_irq_wq/drivers/ata/libata-core.c	2007-05-11 11:54:56.000000000 +0800
@@ -4370,20 +4370,15 @@ err_out:
 
 static inline int ata_hsm_ok_in_wq(struct ata_port *ap, struct ata_queued_cmd *qc)
 {
-	if (qc->tf.flags & ATA_TFLAG_POLLING)
-		return 1;
-
-	if (ap->hsm_task_state == HSM_ST_FIRST) {
-		if (qc->tf.protocol == ATA_PROT_PIO &&
-		    (qc->tf.flags & ATA_TFLAG_WRITE))
-		    return 1;
-
-		if (is_atapi_taskfile(&qc->tf) &&
-		    !(qc->dev->flags & ATA_DFLAG_CDB_INTR))
-			return 1;
+	switch (qc->tf.protocol) {
+	case ATA_PROT_DMA:
+		return 0;
+	case ATA_PROT_ATAPI_DMA:
+		if (ap->hsm_task_state != HSM_ST_FIRST)
+			return 0;
 	}
 
-	return 0;
+	return (ap->pflags & ATA_PFLAG_HSM_WQ) ? 1 : 0;
 }
 
 /**
@@ -4559,7 +4554,7 @@ fsm_start:
 				goto fsm_start;
 			}
 
-			atapi_pio_bytes(qc, 0);
+			atapi_pio_bytes(qc, in_wq);
 
 			if (unlikely(ap->hsm_task_state == HSM_ST_ERR))
 				/* bad ireason reported by device */
@@ -4614,7 +4609,7 @@ fsm_start:
 				goto fsm_start;
 			}
 
-			ata_pio_sectors(qc, 0);
+			ata_pio_sectors(qc, in_wq);
 
 			if (ap->hsm_task_state == HSM_ST_IDLE) {
 				/* all data read */
@@ -4713,6 +4708,31 @@ fsm_start:
 		goto fsm_start;
 }
 
+static void ata_irq_task(struct work_struct *work)
+{
+	struct ata_port *ap =
+		container_of(work, struct ata_port, port_task.work);
+	struct ata_queued_cmd *qc = ap->port_task_data;
+	u8 status;
+
+	WARN_ON(ap->hsm_task_state == HSM_ST_IDLE);
+
+	/* double check the device is not busy */
+	status = ata_chk_status(ap);
+	if (status & ATA_BUSY) {
+		ata_port_printk(ap, KERN_ERR, "Unexpected device busy "
+				"(Status 0x%x)\n", status);
+		return;
+	}
+
+	/* move the HSM */
+	ata_hsm_move(ap, qc, status, 1);
+
+	/* another command or interrupt handler
+	 * may be running at this point.
+	 */
+}
+
 /**
  *	ata_qc_new - Request an available ATA command, for queueing
  *	@ap: Port associated with device @dev
@@ -5250,11 +5270,20 @@ inline unsigned int ata_host_intr (struc
 	/* ack bmdma irq events */
 	ap->ops->irq_clear(ap);
 
-	ata_hsm_move(ap, qc, status, 0);
+	/* invoke HSM */
+	switch (ap->hsm_task_state) {
+	case HSM_ST_FIRST:
+	case HSM_ST:
+		ap->pflags |= ATA_PFLAG_HSM_WQ;
+		ata_port_queue_task(ap, ata_irq_task, qc, 0);
+		break;
+	default:
+		ata_hsm_move(ap, qc, status, 0);
 
-	if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA ||
-				       qc->tf.protocol == ATA_PROT_ATAPI_DMA))
-		ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat);
+		if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA ||
+					       qc->tf.protocol == ATA_PROT_ATAPI_DMA))
+			ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat);
+	}
 
 	return 1;	/* irq handled */
 



  parent reply	other threads:[~2007-05-11  7:38 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-05-07  4:30 [PATCH] libata: disable_irq() during polling IDENTIFY Albert Lee
2007-05-07  7:43 ` Tejun Heo
2007-05-07 11:18   ` Alan Cox
2007-05-07 11:32     ` Tejun Heo
2007-05-08 13:36       ` Mark Lord
2007-05-07 11:19   ` Albert Lee
2007-05-07 11:29     ` Tejun Heo
2007-05-07 11:54       ` Albert Lee
2007-05-07 12:01         ` Tejun Heo
2007-05-08 11:30           ` [PATCH] libata: disable_irq() during polling IDENTIFY (take 2) Albert Lee
2007-05-08 11:41             ` Tejun Heo
2007-05-08 12:00             ` Alan Cox
2007-05-08 12:01               ` Tejun Heo
2007-05-08 12:20                 ` Alan Cox
2007-05-08 12:27                   ` Tejun Heo
2007-05-08 12:43                     ` Alan Cox
2007-05-08 12:45                       ` Tejun Heo
2007-05-08 12:45                     ` Alan Cox
2007-05-08 12:57                       ` Tejun Heo
2007-05-08 14:59                         ` Albert Lee
2007-05-08 15:16                         ` Jeff Garzik
2007-05-11  7:20                         ` [PATCH/RFC 0/7] libata: push part of irq driven pio to workqueue Albert Lee
2007-05-11  7:24                           ` [PATCH 1/7] libata: set the state after "PIO data-in" to HSM_ST_IDLE instead of HSM_ST_LAST Albert Lee
2007-05-11  7:28                           ` [PATCH 2/7] libata: move the ata_altstatus() in ata_hsm_qc_complete() Albert Lee
2007-05-11  7:30                           ` [PATCH 3/7] libata: move ata_altstatus() out to the pio data xfer functions Albert Lee
2007-05-11  7:31                           ` [PATCH 4/7] libata: move polling idle irq check to ata_host_intr() Albert Lee
2007-05-11 14:27                             ` Tejun Heo
2007-05-11 15:25                               ` Albert Lee
2007-05-11  7:35                           ` [PATCH 5/7] libata: move and reduce locking to the pio data xfer functions Albert Lee
2007-05-11 14:37                             ` Tejun Heo
2007-05-11 14:55                               ` Alan Cox
2007-05-11 14:57                                 ` Tejun Heo
2007-05-11 15:12                                   ` Alan Cox
2007-05-11 15:14                                     ` Tejun Heo
2007-05-11 15:24                                       ` Alan Cox
2007-05-11 15:39                                       ` Alan Cox
2007-05-11 16:59                                         ` Tejun Heo
2007-05-11 17:46                                           ` Alan Cox
2007-05-11 17:53                                             ` Tejun Heo
2007-05-11 22:00                                               ` Alan Cox
2007-05-14  8:24                                                 ` Tejun Heo
2007-05-14 11:29                                                   ` Alan Cox
2007-05-11 15:48                               ` Albert Lee
2007-05-11 17:06                                 ` Tejun Heo
2007-05-11 17:38                                   ` Alan Cox
2007-05-11 17:42                                     ` Tejun Heo
2007-05-11 17:07                                 ` Tejun Heo
2007-05-11  7:37                           ` Albert Lee [this message]
2007-05-11  7:41                           ` [PATCH 7/7] libata: ack unexpected INTRQ when polling Albert Lee
2007-05-07 14:28         ` [PATCH] libata: disable_irq() during polling IDENTIFY Alan Cox
2007-05-08 13:42           ` Mark Lord
2007-05-08 13:57             ` Alan Cox

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=46441D55.20507@tw.ibm.com \
    --to=albertcc@tw.ibm.com \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=albertl@mail.com \
    --cc=bzolnier@gmail.com \
    --cc=dwm@enoyolf.org \
    --cc=htejun@gmail.com \
    --cc=jeff@garzik.org \
    --cc=liml@rtr.ca \
    --cc=linux-ide@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.