* Re: Re: [2.6.21.1] SATA freeze
@ 2007-05-10 23:41 Fred Moyer
0 siblings, 0 replies; only message in thread
From: Fred Moyer @ 2007-05-10 23:41 UTC (permalink / raw)
To: linux-kernel
Robert Hancock wrote:
>Gerhard Mack wrote:
>> On Wed, 9 May 2007, Jeff Garzik wrote:
>>> Gerhard Mack wrote:
>>>> May 9 14:51:35 mgerhard kernel: ata1.00: exception Emask 0x0 SAct
0x0 SErr
>>>> 0x1800000 action 0x2 frozen
>>>> May 9 14:51:35 mgerhard kernel: ata1.00: cmd
>>>> 35/00:00:80:6d:c8/00:04:09:00:00/e0 tag 0 cdb 0x0 data 524288 out
>>>> May 9 14:51:35 mgerhard kernel: res
>>>> 40/00:c8:68:65:c8/84:00:09:00:00/e0 Emask 0x4 (timeout)
>>>> May 9 14:51:42 mgerhard kernel: ata1: port is slow to respond,
please be
>>>> patient (Status 0xd0)
>>>>
>>>> Anything I can do to figgure out what's causing this?
> You're showing various flags set in the SError register, which
> suggests you're having SATA communication problems with the drive. A
> bad SATA cable or power problems would be a strong possibility.
I just joined the list today so apologies if this email breaks any email
client post threading.
I have been seeing similar errors on two different systems. I applied
Robert's sata_nv patch posted to the list on May 5th, and approved today
by Jeff Garzik. I've taken several steps to insure that this isn't a
faulty cable or drive issue. This is running on a hp dl145g2. Here is
my lspci, dmesg, and relevant kernel config sections:
Linux version 2.6.21-gentoo (root@app2.redhotpenguin.com) (gcc version
4.1.1 (Gentoo 4.1.1)) #6 SMP Sun May 6 16:44:40 PDT 2007
Command line: root=/dev/sda2
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000098800 (usable)
BIOS-e820: 0000000000098800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000c2000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bff20000 (usable)
BIOS-e820: 00000000bff20000 - 00000000bff29000 (ACPI data)
BIOS-e820: 00000000bff29000 - 00000000bff80000 (ACPI NVS)
BIOS-e820: 00000000bff80000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000d8000000 - 00000000d8000400 (reserved)
BIOS-e820: 00000000d8001000 - 00000000d8001400 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
Entering add_active_range(0, 0, 152) 0 entries of 256 used
Entering add_active_range(0, 256, 786208) 1 entries of 256 used
Entering add_active_range(0, 1048576, 1310720) 2 entries of 256 used
end_pfn_map = 1310720
DMI present.
Entering add_active_range(0, 0, 152) 0 entries of 256 used
Entering add_active_range(0, 256, 786208) 1 entries of 256 used
Entering add_active_range(0, 1048576, 1310720) 2 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1310720
early_node_map[3] active PFN ranges
0: 0 -> 152
0: 256 -> 786208
0: 1048576 -> 1310720
On node 0 totalpages: 1048248
DMA zone: 56 pages used for memmap
DMA zone: 1138 pages reserved
DMA zone: 2798 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 767832 pages, LIFO batch:31
Normal zone: 3584 pages used for memmap
Normal zone: 258560 pages, LIFO batch:31
Intel MultiProcessor Specification v1.4
MPTABLE: OEM ID: AMD MPTABLE: Product ID: HAMMER MPTABLE:
APIC at: 0xFEE00000
Processor #0 (Bootup-CPU)
Processor #1
I/O APIC #2 at 0xFEC00000.
I/O APIC #3 at 0xD8000000.
I/O APIC #4 at 0xD8001000.
Setting APIC routing to flat
Processors: 2
Nosave address range: 0000000000098000 - 0000000000099000
Nosave address range: 0000000000099000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000c2000
Nosave address range: 00000000000c2000 - 0000000000100000
Nosave address range: 00000000bff20000 - 00000000bff29000
Nosave address range: 00000000bff29000 - 00000000bff80000
Nosave address range: 00000000bff80000 - 00000000c0000000
Nosave address range: 00000000c0000000 - 00000000d8000000
Nosave address range: 00000000d8000000 - 00000000d8001000
Nosave address range: 00000000d8001000 - 00000000e0000000
Nosave address range: 00000000e0000000 - 00000000f0000000
Nosave address range: 00000000f0000000 - 00000000fec00000
Nosave address range: 00000000fec00000 - 00000000fee00000
Nosave address range: 00000000fee00000 - 00000000fee01000
Nosave address range: 00000000fee01000 - 00000000fff80000
Nosave address range: 00000000fff80000 - 0000000100000000
Allocating PCI resources starting at c2000000 (gap: c0000000:18000000)
PERCPU: Allocating 36608 bytes of per cpu data
Built 1 zonelists. Total pages: 1029190
Kernel command line: root=/dev/sda2
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Detected 2009.287 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
CPU 0: aperture @ 233e000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 8000000
Memory: 4044456k/5242880k available (2259k kernel code, 148400k
reserved, 1224k data, 240k init)
Calibrating delay using timer specific routine.. 4021.00 BogoMIPS
(lpj=8042012)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
Freeing SMP alternatives: 28k freed
ExtINT not setup in hardware but reported by MP table
Using local APIC timer interrupts.
result 12558039
Detected 12.558 MHz APIC timer.
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4018.82 BogoMIPS
(lpj=8037658)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
AMD Opteron(tm) Processor 246 stepping 01
Brought up 2 CPUs
migration_cost=558
NET: Registered protocol family 16
PCI: Using configuration type 1
SCSI subsystem initialized
libata version 2.20 loaded.
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:05.0
PCI: Transparent bridge - 0000:00:09.0
PCI: Discovered primary peer bus 80 [IRQ]
PCI: Using IRQ router default [10de/0051] at 0000:00:01.0
PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 10
PCI->APIC IRQ transform: 0000:00:02.1[B] -> IRQ 11
PCI->APIC IRQ transform: 0000:00:08.0[A] -> IRQ 10
PCI->APIC IRQ transform: 0000:01:05.0[A] -> IRQ 11
PCI->APIC IRQ transform: 0000:02:00.0[A] -> IRQ 11
PCI->APIC IRQ transform: 0000:03:00.0[A] -> IRQ 10
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 8000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
PCI: Bridge: 0000:00:09.0
IO window: disabled.
MEM window: c9000000-c9ffffff
PREFETCH window: d0000000-d7ffffff
PCI: Bridge: 0000:00:0c.0
IO window: disabled.
MEM window: ca000000-ca0fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
IO window: disabled.
MEM window: ca100000-ca1fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
PCI: Bridge: 0000:80:01.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:80:02.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Total HugeTLB memory allocated, 0
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
0000:00:02.1 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
PCI: Found disabled HT MSI Mapping on 0000:00:0c.0
PCI: Found enabled HT MSI Mapping on 0000:00:00.0
PCI: Found disabled HT MSI Mapping on 0000:00:0d.0
PCI: Found enabled HT MSI Mapping on 0000:00:00.0
PCI: Found disabled HT MSI Mapping on 0000:00:0e.0
PCI: Found enabled HT MSI Mapping on 0000:00:00.0
PCI: Setting latency timer of device 0000:00:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
tg3.c:v3.75 (March 23, 2007)
PCI: Setting latency timer of device 0000:02:00.0 to 64
eth0: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express)
10/100/1000Base-T Ethernet 00:18:71:e3:74:a7
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
PCI: Setting latency timer of device 0000:03:00.0 to 64
eth1: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express)
10/100/1000Base-T Ethernet 00:18:71:e3:74:a6
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[76180000] dma_mask[64-bit]
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 162
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0x1400-0x1407, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x1408-0x140f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
Probing IDE interface ide1...
Probing IDE interface ide0...
Probing IDE interface ide1...
sata_nv 0000:00:08.0: version 3.3
sata_nv 0000:00:08.0: Using ADMA mode
PCI: Setting latency timer of device 0000:00:08.0 to 64
ata1: SATA max UDMA/133 cmd 0xffffc20000012480 ctl 0xffffc200000124a0
bmdma 0x0000000000011410 irq 10
ata2: SATA max UDMA/133 cmd 0xffffc20000012580 ctl 0xffffc200000125a0
bmdma 0x0000000000011418 irq 10
scsi0 : sata_nv
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: ST3808110AS, 3.AJJ, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
scsi1 : sata_nv
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-7: ST3808110AS, 3.AJJ, max UDMA/100
ata2.00: 156301488 sectors, multi 16: LBA48
ata2.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA ST3808110AS n/a PQ: 0 ANSI: 5
ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw
segs 61
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: disabled, read cache: enabled, doesn't
support DPO or FUA
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: disabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Direct-Access ATA ST3808110AS n/a PQ: 0 ANSI: 5
ata2: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw
segs 61
SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: disabled, read cache: enabled, doesn't
support DPO or FUA
SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: disabled, read cache: enabled, doesn't
support DPO or FUA
sdb: sdb1
sd 1:0:0:0: Attached scsi disk sdb
sd 1:0:0:0: Attached scsi generic sg1 type 0
Fusion MPT base driver 3.04.04
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.04
Fusion MPT SAS Host driver 3.04.04
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: sda2: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 1824426
ext3_orphan_cleanup: deleting unreferenced inode 1824259
ext3_orphan_cleanup: deleting unreferenced inode 1824258
EXT3-fs: sda2: 3 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 240k freed
EXT3 FS on sda2, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2096472k swap on /dev/sda3. Priority:-1 extents:1 across:2096472k
PM: Writing back config space on device 0000:02:00.0 at offset c (was
263c0000, writing 0)
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is off for TX and off for RX.
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data
123392 in
res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM
violation)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data
123392 in
res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM
violation)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data
123392 in
res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM
violation)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data
123392 in
res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM
violation)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data
123392 in
res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM
violation)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data
123392 in
res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM
violation)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
ata1: EH complete
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: disabled, read cache: enabled, doesn't
support DPO or FUA
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data
126976 in
res 50/00:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM
violation)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data
126976 in
res 50/00:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM
violation)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data
126976 in
res 50/00:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM
violation)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data
126976 in
res 50/00:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM
violation)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data
126976 in
res 50/00:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM
violation)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data
126976 in
res 50/00:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM
violation)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
ata1: EH complete
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: disabled, read cache: enabled, doesn't
support DPO or FUA
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: disabled, read cache: enabled, doesn't
support DPO or FUA
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data
123392 in
res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM
violation)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data
123392 in
res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM
violation)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data
123392 in
res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM
violation)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data
123392 in
res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM
violation)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data
123392 in
res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM
violation)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data
123392 in
res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM
violation)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: disabled, read cache: enabled, doesn't
support DPO or FUA
SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: disabled, read cache: enabled, doesn't
support DPO or FUA
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data
126976 in
res 50/00:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM
violation)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data
126976 in
res 50/00:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM
violation)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data
126976 in
res 50/00:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM
violation)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data
126976 in
res 50/00:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM
violation)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data
126976 in
res 50/00:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM
violation)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data
126976 in
res 50/00:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM
violation)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: disabled, read cache: enabled, doesn't
support DPO or FUA
SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: disabled, read cache: enabled, doesn't
support DPO or FUA
app2 ~ # lspci -v
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller
(rev a3)
Subsystem: Hewlett-Packard Company Unknown device 3207
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Capabilities: [e0] HyperTransport: MSI Mapping
00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
Subsystem: Hewlett-Packard Company Unknown device 3207
Flags: bus master, 66MHz, fast devsel, latency 0
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
Subsystem: Hewlett-Packard Company Unknown device 3207
Flags: 66MHz, fast devsel
I/O ports at 1000 [size=32]
I/O ports at 5000 [size=64]
I/O ports at 5040 [size=64]
Capabilities: [44] Power Management version 2
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
(prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Unknown device 3207
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 10
Memory at c8000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3)
(prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Unknown device 3207
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11
Memory at c8001000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port
Capabilities: [80] Power Management version 2
00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2) (prog-if 8a
[Master SecP PriP])
Subsystem: Hewlett-Packard Company Unknown device 3207
Flags: bus master, 66MHz, fast devsel, latency 0
[virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
I/O ports at 1400 [size=16]
Capabilities: [44] Power Management version 2
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller
(rev a3) (prog-if 85 [Master SecO PriO])
Subsystem: Hewlett-Packard Company Unknown device 3207
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 10
I/O ports at 1430 [size=8]
I/O ports at 1424 [size=4]
I/O ports at 1428 [size=8]
I/O ports at 1420 [size=4]
I/O ports at 1410 [size=16]
Memory at c8002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
(prog-if 01 [Subtractive decode])
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Memory behind bridge: c9000000-c9ffffff
Prefetchable memory behind bridge: d0000000-d7ffffff
00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
(prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: ca000000-ca0fffff
Capabilities: [40] Power Management version 2
Capabilities: [48] Message Signalled Interrupts: 64bit+
Queue=0/1 Enable+
Capabilities: [58] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
(prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: ca100000-ca1fffff
Capabilities: [40] Power Management version 2
Capabilities: [48] Message Signalled Interrupts: 64bit+
Queue=0/1 Enable+
Capabilities: [58] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
(prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Capabilities: [40] Power Management version 2
Capabilities: [48] Message Signalled Interrupts: 64bit+
Queue=0/1 Enable+
Capabilities: [58] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface
Capabilities: [a0] HyperTransport: Host or Secondary Interface
Capabilities: [c0] HyperTransport: Host or Secondary Interface
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
Flags: fast devsel
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
Flags: fast devsel
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
Flags: fast devsel
00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface
Capabilities: [a0] HyperTransport: Host or Secondary Interface
Capabilities: [c0] HyperTransport: Host or Secondary Interface
00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
Flags: fast devsel
00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
Flags: fast devsel
00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
Flags: fast devsel
01:05.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2
MX/MX 400] (rev b2) (prog-if 00 [VGA])
Subsystem: Hewlett-Packard Company Unknown device 3207
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
Memory at c9000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (32-bit, prefetchable) [size=128M]
[virtual] Expansion ROM at c2000000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721
Gigabit Ethernet PCI Express (rev 11)
Subsystem: Hewlett-Packard Company Unknown device 3209
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at ca000000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+
Queue=0/3 Enable-
Capabilities: [d0] Express Endpoint IRQ 0
03:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721
Gigabit Ethernet PCI Express (rev 11)
Subsystem: Hewlett-Packard Company Unknown device 3209
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at ca100000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+
Queue=0/3 Enable-
Capabilities: [d0] Express Endpoint IRQ 0
80:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8132 PCI-X Bridge
(rev 12) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 64
Bus: primary=80, secondary=81, subordinate=85, sec-latency=64
Capabilities: [60] PCI-X bridge device
Capabilities: [b8] HyperTransport: Interrupt Discovery and
Configuration
Capabilities: [c0] HyperTransport: Slave or Primary Interface
Capabilities: [f4] HyperTransport: MSI Mapping
80:01.1 PIC: Advanced Micro Devices [AMD] AMD-8132 PCI-X IOAPIC (rev 12)
(prog-if 10 [IO-APIC])
Subsystem: Hewlett-Packard Company Unknown device 3207
Flags: bus master, medium devsel, latency 0
80:02.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8132 PCI-X Bridge
(rev 12) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 64
Bus: primary=80, secondary=86, subordinate=8a, sec-latency=64
Capabilities: [60] PCI-X bridge device
Capabilities: [b8] HyperTransport: Interrupt Discovery and
Configuration
Capabilities: [c0] HyperTransport: Revision ID: 2.00
Capabilities: [f4] HyperTransport: MSI Mapping
80:02.1 PIC: Advanced Micro Devices [AMD] AMD-8132 PCI-X IOAPIC (rev 12)
(prog-if 10 [IO-APIC])
Subsystem: Hewlett-Packard Company Unknown device 3207
Flags: bus master, medium devsel, latency 0
app2 linux-2.6.21-gentoo # egrep -i '(sata|scsi)' .config
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# SCSI device support
CONFIG_SCSI=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set
# SCSI support type (disk, tape, CD-ROM)
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
# SCSI Transports
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set
# SCSI low-level drivers
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SVW is not set
CONFIG_SATA_NV=y
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
CONFIG_SATA_SIL=y
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
CONFIG_SATA_INTEL_COMBINED=y
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-05-10 23:48 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-05-10 23:41 Re: [2.6.21.1] SATA freeze Fred Moyer
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.