From: Ayaz Abdulla <aabdulla@nvidia.com>
To: Jeff Garzik <jgarzik@pobox.com>,
Manfred Spraul <manfred@colorfullife.com>,
Andrew Morton <akpm@osdl.org>, nedev <netdev@vger.kernel.org>
Subject: [PATCH 1/4] forcedeth: add vitesse phy
Date: Mon, 21 May 2007 20:22:45 -0400 [thread overview]
Message-ID: <465237D5.4050809@nvidia.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 104 bytes --]
This patch adds errata support for the vitesse phy.
Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
[-- Attachment #2: patch-forcedeth-vitesse --]
[-- Type: text/plain, Size: 5984 bytes --]
--- old/drivers/net/forcedeth.c 2007-05-01 15:30:53.000000000 -0400
+++ new/drivers/net/forcedeth.c 2007-05-01 15:30:57.000000000 -0400
@@ -550,6 +550,7 @@
/* PHY defines */
#define PHY_OUI_MARVELL 0x5043
#define PHY_OUI_CICADA 0x03f1
+#define PHY_OUI_VITESSE 0x01c1
#define PHYID1_OUI_MASK 0x03ff
#define PHYID1_OUI_SHFT 6
#define PHYID2_OUI_MASK 0xfc00
@@ -557,12 +558,29 @@
#define PHYID2_MODEL_MASK 0x03f0
#define PHY_MODEL_MARVELL_E3016 0x220
#define PHY_MARVELL_E3016_INITMASK 0x0300
-#define PHY_INIT1 0x0f000
-#define PHY_INIT2 0x0e00
-#define PHY_INIT3 0x01000
-#define PHY_INIT4 0x0200
-#define PHY_INIT5 0x0004
-#define PHY_INIT6 0x02000
+#define PHY_CICADA_INIT1 0x0f000
+#define PHY_CICADA_INIT2 0x0e00
+#define PHY_CICADA_INIT3 0x01000
+#define PHY_CICADA_INIT4 0x0200
+#define PHY_CICADA_INIT5 0x0004
+#define PHY_CICADA_INIT6 0x02000
+#define PHY_VITESSE_INIT_REG1 0x1f
+#define PHY_VITESSE_INIT_REG2 0x10
+#define PHY_VITESSE_INIT_REG3 0x11
+#define PHY_VITESSE_INIT_REG4 0x12
+#define PHY_VITESSE_INIT_MSK1 0xc
+#define PHY_VITESSE_INIT_MSK2 0x0180
+#define PHY_VITESSE_INIT1 0x52b5
+#define PHY_VITESSE_INIT2 0xaf8a
+#define PHY_VITESSE_INIT3 0x8
+#define PHY_VITESSE_INIT4 0x8f8a
+#define PHY_VITESSE_INIT5 0xaf86
+#define PHY_VITESSE_INIT6 0x8f86
+#define PHY_VITESSE_INIT7 0xaf82
+#define PHY_VITESSE_INIT8 0x0100
+#define PHY_VITESSE_INIT9 0x8f82
+#define PHY_VITESSE_INIT10 0x0
+
#define PHY_GIGABIT 0x0100
#define PHY_TIMEOUT 0x1
@@ -1141,14 +1159,14 @@
/* phy vendor specific configuration */
if ((np->phy_oui == PHY_OUI_CICADA) && (phyinterface & PHY_RGMII) ) {
phy_reserved = mii_rw(dev, np->phyaddr, MII_RESV1, MII_READ);
- phy_reserved &= ~(PHY_INIT1 | PHY_INIT2);
- phy_reserved |= (PHY_INIT3 | PHY_INIT4);
+ phy_reserved &= ~(PHY_CICADA_INIT1 | PHY_CICADA_INIT2);
+ phy_reserved |= (PHY_CICADA_INIT3 | PHY_CICADA_INIT4);
if (mii_rw(dev, np->phyaddr, MII_RESV1, phy_reserved)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
phy_reserved = mii_rw(dev, np->phyaddr, MII_NCONFIG, MII_READ);
- phy_reserved |= PHY_INIT5;
+ phy_reserved |= PHY_CICADA_INIT5;
if (mii_rw(dev, np->phyaddr, MII_NCONFIG, phy_reserved)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
@@ -1156,12 +1174,82 @@
}
if (np->phy_oui == PHY_OUI_CICADA) {
phy_reserved = mii_rw(dev, np->phyaddr, MII_SREVISION, MII_READ);
- phy_reserved |= PHY_INIT6;
+ phy_reserved |= PHY_CICADA_INIT6;
if (mii_rw(dev, np->phyaddr, MII_SREVISION, phy_reserved)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
}
+ if (np->phy_oui == PHY_OUI_VITESSE) {
+ if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG1, PHY_VITESSE_INIT1)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT2)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ phy_reserved = mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG4, MII_READ);
+ if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG4, phy_reserved)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ phy_reserved = mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG3, MII_READ);
+ phy_reserved &= ~PHY_VITESSE_INIT_MSK1;
+ phy_reserved |= PHY_VITESSE_INIT3;
+ if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG3, phy_reserved)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT4)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT5)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ phy_reserved = mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG4, MII_READ);
+ phy_reserved &= ~PHY_VITESSE_INIT_MSK1;
+ phy_reserved |= PHY_VITESSE_INIT3;
+ if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG4, phy_reserved)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ phy_reserved = mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG3, MII_READ);
+ if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG3, phy_reserved)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT6)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT7)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ phy_reserved = mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG4, MII_READ);
+ if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG4, phy_reserved)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ phy_reserved = mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG3, MII_READ);
+ phy_reserved &= ~PHY_VITESSE_INIT_MSK2;
+ phy_reserved |= PHY_VITESSE_INIT8;
+ if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG3, phy_reserved)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT9)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG1, PHY_VITESSE_INIT10)) {
+ printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+ return PHY_ERROR;
+ }
+ }
/* some phys clear out pause advertisment on reset, set it back */
mii_rw(dev, np->phyaddr, MII_ADVERTISE, reg);
next reply other threads:[~2007-05-22 3:08 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-22 0:22 Ayaz Abdulla [this message]
2007-05-24 21:54 ` [PATCH 1/4] forcedeth: add vitesse phy Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=465237D5.4050809@nvidia.com \
--to=aabdulla@nvidia.com \
--cc=akpm@osdl.org \
--cc=jgarzik@pobox.com \
--cc=manfred@colorfullife.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.