From: Robert de Rooy <robert.de.rooy@gmail.com>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jeff Garzik <jeff@garzik.org>, Tejun Heo <htejun@gmail.com>,
linux-kernel@vger.kernel.org, bzolnier@gmail.com,
linux-pcmcia@lists.infradead.org
Subject: Re: libata and legacy ide pcmcia failure
Date: Wed, 23 May 2007 20:47:06 +0200 [thread overview]
Message-ID: <46548C2A.5050006@gmail.com> (raw)
In-Reply-To: <20070523150229.00a0c3c4@the-village.bc.nu>
Alan Cox wrote:
>>> http://thread.gmane.org/gmane.linux.kernel/530099
>>>
>>> It seems we're losing interrupts from the CFA device. Any ideas?
>>>
>> Alan probably knows more, but ISTR some CFA PCMCIA devices that needed
>> polling...
>>
>
> Not that I know of. Not devices anyway - there are embedded boxes with no
> IRQ configuration for the CF slot but we've never supported those (indeed
> there are even people who bitbang ATA on GPIO pins...)
>
>
So my understanding is, that although some issues with the libata pcmcia
code where found, the latest issue is a pure pcmcia issue?
Anything I can supply or test to further narrow down the problem?
I have already posted lspci -vxxx and full dmesg log to the linux-kernel
list, but here are some select pieces of it....
Yenta: CardBus bridge found at 0000:02:00.0 [1014:0552]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:00.0, mfunc 0x01d21b22, devctl 0x64
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000086
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
cs: IO port probe 0x4000-0x8fff: clean.
pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
PM: Adding info for No Bus:pcmcia_socket0
Yenta: CardBus bridge found at 0000:02:00.1 [1014:0552]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:00.1, mfunc 0x01d21b22, devctl 0x64
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000086
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
cs: IO port probe 0x4000-0x8fff: clean.
pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
PM: Adding info for No Bus:pcmcia_socket1
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7 clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
02:00.0 CardBus bridge: Texas Instruments PCI4520 PC card Cardbus
Controller (rev 01)
Subsystem: IBM Unknown device 0552
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at b0000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: e8000000-ebfff000 (prefetchable)
Memory window 1: c4000000-c7fff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
16-bit legacy interface ports at 0001
00: 4c 10 46 ac 07 00 10 02 01 00 07 06 20 a8 82 00
10: 00 00 00 b0 a0 00 00 02 02 03 06 b0 00 00 00 e8
20: 00 f0 ff eb 00 00 00 c4 00 f0 ff c7 00 40 00 00
30: fc 40 00 00 00 44 00 00 fc 44 00 00 0b 01 c0 05
40: 14 10 52 05 01 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 71 d0 40 08 00 00 0a 04 00 00 0f 00 22 1b d2 01
90: c0 02 64 41 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 00 12 fe 00 00 c0 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
02:00.1 CardBus bridge: Texas Instruments PCI4520 PC card Cardbus
Controller (rev 01)
Subsystem: IBM Unknown device 0552
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at b1000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=07, subordinate=07, sec-latency=176
Memory window 0: ec000000-effff000 (prefetchable)
Memory window 1: c8000000-cbfff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
16-bit legacy interface ports at 0001
00: 4c 10 46 ac 07 00 10 02 01 00 07 06 20 a8 82 00
10: 00 00 00 b1 a0 00 00 02 02 07 07 b0 00 00 00 ec
20: 00 f0 ff ef 00 00 00 c8 00 f0 ff cb 00 48 00 00
30: fc 48 00 00 00 4c 00 00 fc 4c 00 00 0b 02 c0 05
40: 14 10 52 05 01 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 71 d0 40 08 00 00 0a 04 00 00 0f 00 22 1b d2 01
90: c0 02 64 41 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 00 12 fe 00 00 c0 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
next prev parent reply other threads:[~2007-05-23 18:47 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-15 18:59 libata pcmcia failure Robert de Rooy
2007-05-17 8:42 ` Robert de Rooy
2007-05-17 20:15 ` libata and legacy ide " Robert de Rooy
2007-05-20 11:31 ` Tejun Heo
2007-05-20 21:13 ` Robert de Rooy
2007-05-21 11:50 ` Tejun Heo
2007-05-21 12:37 ` Alan Cox
2007-05-21 12:42 ` Tejun Heo
2007-05-21 15:10 ` Robert de Rooy
2007-05-21 15:18 ` Tejun Heo
2007-05-21 16:11 ` Robert de Rooy
2007-05-21 16:22 ` Tejun Heo
2007-05-21 17:16 ` Robert de Rooy
2007-05-21 21:12 ` Jeff Garzik
2007-05-22 19:37 ` Robert de Rooy
2007-05-23 14:02 ` Alan Cox
2007-05-23 18:47 ` Robert de Rooy [this message]
2007-06-06 20:27 ` Robert de Rooy
2007-06-07 7:28 ` Tejun Heo
2007-06-07 19:22 ` Robert de Rooy
2007-06-08 7:10 ` Tejun Heo
2007-06-08 12:46 ` Mark Lord
2007-06-08 12:46 ` Mark Lord
2007-06-08 22:06 ` Robert de Rooy
2007-06-08 22:11 ` Mark Lord
2007-06-10 1:01 ` Robert de Rooy
2007-06-10 20:46 ` Mark Lord
2007-06-10 21:50 ` Robert de Rooy
2007-06-10 22:13 ` Russell King
2007-06-10 22:26 ` Mark Lord
2007-06-11 22:36 ` Robert de Rooy
2007-06-11 22:40 ` Mark Lord
2007-06-11 22:40 ` Mark Lord
2007-06-12 3:24 ` Tejun Heo
2007-06-13 1:36 ` Albert Lee
2007-06-14 9:39 ` Tejun Heo
2007-06-22 11:51 ` Robert de Rooy
2007-06-22 13:32 ` Mark Lord
2007-06-25 4:04 ` Albert Lee
2007-06-25 9:31 ` Robert de Rooy
2007-06-25 10:15 ` Albert Lee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46548C2A.5050006@gmail.com \
--to=robert.de.rooy@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=bzolnier@gmail.com \
--cc=htejun@gmail.com \
--cc=jeff@garzik.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pcmcia@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.