* [LARTC] vlan interfaces and tc
@ 2007-06-09 15:09 Michal Soltys
0 siblings, 0 replies; only message in thread
From: Michal Soltys @ 2007-06-09 15:09 UTC (permalink / raw)
To: lartc
Hello
I have few questions regarding tc functionality (qdiscs, classes, etc.) when
vlans are in use. For example, consider interface eth0, for which I create
and extra vlan with vconfig, let's say eth0.11. Then using tc I can add
usual things - qdiscs, filters, ... - to both eth0 and eth0.11. The
questions are:
- on which interface - virtual or real, should I actually use tc ? Or are
either of them allowed, depending on what I need ? If so:
- what happens if both interfaces - virtual and real have disciplines /
filters ? Does packet traverse both (I'd assume, first through eth0.11 than
through eth0) ?
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-06-09 15:09 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-06-09 15:09 [LARTC] vlan interfaces and tc Michal Soltys
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.