* ixp425 vs madwifi with armv5te big endian AND EABI error
@ 2007-06-12 17:56 Robert Wörle
0 siblings, 0 replies; only message in thread
From: Robert Wörle @ 2007-06-12 17:56 UTC (permalink / raw)
To: openembedded-devel
Dear Openembedded Devel List
Iam developing a least cost router based on the Intel ixp425 CPUI and
some minipci slots. ( Board ADI Pronghorn-Metro).
Iam now infront of a problem where i would like ask for assistance.
The madwifi driver which powers the atheros wifi cards ( quite some wide
range also on multiband cards) uses firmware code tobe linked into their
drivers.
Now as i need to crosscompile my build fails like this
LD [M]
/tmp/work/ixp4xxbe-angstrom-linux-gnueabi/madwifi-modules-1.0.0+cvs20060814-r0/madwifi/ath_hal/ath_hal.o
| armeb-angstrom-linux-gnueabi-ld: ERROR: Source object
/tmp/work/ixp4xxbe-angstrom-linux-gnueabi/madwifi-modules-1.0.0+cvs20060814-r0/madwifi/ath_hal/hal.o
has EABI version 0, but target
/mp/work/ixp4xxbe-angstrom-linux-gnueabi/madwifi-modules-1.0.0+cvs20060814-r0/madwifi/ath_hal/ath_hal.o
has EABI version 4
My suspicion is that the this binary code was compiled oabi hence eabi v
0. But the rest off all is of course eabi compiled.
will i need to get a armv5te firmware supporting this ?
is it an option to go oabi on my whole toolchain ? ( if yes point me to
side effects and ways to go, please)
I am kinda lost now .. what can i do ?
Kind Regards
rob_w
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-06-12 17:59 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-06-12 17:56 ixp425 vs madwifi with armv5te big endian AND EABI error Robert Wörle
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.