From: Ingo Swieter <ingo.swieter@brunel.de>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] bootm shows Kernel info but reset
Date: Thu, 14 Jun 2007 13:21:58 +0200 [thread overview]
Message-ID: <467124D6.2080105@brunel.de> (raw)
Hello,
i have a problem starting Linux from U-Boot.
I compile my Linux-Kernel with the make uImage command
and copy it to my tftpboot directory.
With U-Boot i can load the image through tftp and the
bootm command shows the correct information. But after
a while, around half second, it restarts U-Boot again.
Do you have any hint for that problem?
Best Regards,
Ingo
---
# t 100000 uImage
Using FEC ETHERNET device
TFTP from server 172.16.102.78; our IP address is 172.16.102.79
Filename 'uImage'.
Load address: 0x100000
Loading: #################################################################
#################################################################
###
done
Bytes transferred = 679637 (a5ed5 hex)
# bootm 100000
## Booting image at 00100000 ...
Image Name: Linux-2.4.25
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 679573 Bytes = 663.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
U-Boot 1.2.0 (Jun 14 2007 - 11:03:06) BCS_EPDEV_P01-00
CPU: MPC885ZPnn at 100 MHz [40.0...133.0 MHz]
8 kB I-Cache 8 kB D-Cache FEC present
Board: EP88xC 1.1 CPLD revision 2
Watchdog enabled
DRAM: 64 MB
FLASH: 32 MB
In: serial
Out: serial
Err: serial
Net: FEC ETHERNET, FEC2 ETHERNET
#
--
Ingo Swieter
Tel: 05121/1760-821
Mail: ingo.swieter at brunel.de
Brunel GmbH
Bereich Communications
Daimlerring 9
31135 Hildesheim
Fax: 05121/1760-999
Internet: http://www.brunel.de
Hauptsitz: Airport City, Hermann-K?hl-Str. 1 a, 28199 Bremen
Amtsgericht Bremen HRB 16935
General Manager: Carsten Siebeneich
next reply other threads:[~2007-06-14 11:21 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-14 11:21 Ingo Swieter [this message]
2007-06-14 16:34 ` [U-Boot-Users] bootm shows Kernel info but reset Leonid
2007-06-18 10:54 ` Ingo Swieter
2007-06-14 21:23 ` Wolfgang Denk
2007-06-18 11:02 ` Ingo Swieter
2007-06-19 22:22 ` Thomas Jansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=467124D6.2080105@brunel.de \
--to=ingo.swieter@brunel.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.