[U-Boot-Users] bootm shows Kernel info but reset

[Ingo Swieter <ingo.swieter@brunel.de>]

Hi Leonid,

i uncommented DEBUG but that doesn't
show to much information yet:
## cmdline at 0x007FFF00 ... 0x007FFF85

so i had a look at that address:
# md 7fff00
..    console=ttyS0,11
..    5200 console=tty
..    S0 root=/dev/nfs
..    ip=172.16.102.7
..    9:::255.255.255.
..    0::eth0 nfsroot=
..    172.16.102.78:/e
..   pdev/tools/ppc_8
..    xx rw.L;.2D..&.3

which show exactly the expected information, the command line
for the kernel.

/Ingo

Leonid schrieb:
> First, try to uncomment DEBUG in cmd_bootm.c - you may see useful output. 
> Second, see how your serial connection is initialized - why there is no any output on console? What is command line u-boot provides for the kernel? 
> 
> Leonid.
>