* [PATCH] pm2fb: mtrr support and noaccel option
@ 2007-06-17 20:21 Krzysztof Helt
0 siblings, 0 replies; only message in thread
From: Krzysztof Helt @ 2007-06-17 20:21 UTC (permalink / raw)
To: Linux Fbdev development list
[-- Attachment #1: Type: text/plain, Size: 3204 bytes --]
From: Krzysztof Helt <krzysztof.h1@wp.pl>
This patch adds usage of MTRR registers and two new options: noaccel and nomtrr.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
---
--- linux-2.6.21.old/drivers/video/pm2fb.c 2007-06-06 18:44:49.000000000 +0200
+++ linux-2.6.21/drivers/video/pm2fb.c 2007-06-17 21:54:16.009433094 +0200
@@ -38,6 +38,9 @@
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/pci.h>
+#ifdef CONFIG_MTRR
+#include <asm/mtrr.h>
+#endif
#include <video/permedia2.h>
#include <video/cvisionppc.h>
@@ -71,8 +74,13 @@ static char *mode __devinitdata = NULL;
* these flags allow the user to specify that requests for +ve sync
* should be silently turned in -ve sync.
*/
-static int lowhsync;
-static int lowvsync;
+static int lowhsync __devinitdata;
+static int lowvsync __devinitdata;
+static int noaccel __devinitdata;
+/* mtrr option */
+#ifdef CONFIG_MTRR
+static int nomtrr __devinitdata;
+#endif
/*
* The hardware state of the graphics card that isn't part of the
@@ -88,6 +96,7 @@ struct pm2fb_par
u32 mem_control; /* MemControl reg at probe */
u32 boot_address; /* BootAddress reg at probe */
u32 palette[16];
+ int mtrr_handle;
};
/*
@@ -1316,6 +1325,14 @@ static int __devinit pm2fb_probe(struct
goto err_exit_mmio;
}
+#ifdef CONFIG_MTRR
+ if (!nomtrr)
+ default_par->mtrr_handle =
+ mtrr_add(pm2fb_fix.smem_start,
+ pm2fb_fix.smem_len,
+ MTRR_TYPE_WRCOMB, 1);
+#endif
+
info->fbops = &pm2fb_ops;
info->fix = pm2fb_fix;
info->pseudo_palette = default_par->palette;
@@ -1324,6 +1341,11 @@ static int __devinit pm2fb_probe(struct
FBINFO_HWACCEL_COPYAREA |
FBINFO_HWACCEL_FILLRECT;
+ if (noaccel) {
+ printk(KERN_DEBUG "disabling acceleration\n");
+ info->flags |= FBINFO_HWACCEL_DISABLED;
+ }
+
if (!mode)
mode = "640x480@60";
@@ -1375,6 +1397,11 @@ static void __devexit pm2fb_remove(struc
unregister_framebuffer(info);
+#ifdef CONFIG_MTRR
+ if (par->mtrr_handle >= 0)
+ mtrr_del(par->mtrr_handle, info->fix.smem_start,
+ info->fix.smem_len);
+#endif /* CONFIG_MTRR */
iounmap(info->screen_base);
release_mem_region(fix->smem_start, fix->smem_len);
iounmap(par->v_regs);
@@ -1430,6 +1457,12 @@ static int __init pm2fb_setup(char *opti
lowhsync = 1;
} else if(!strcmp(this_opt, "lowvsync")) {
lowvsync = 1;
+#ifdef CONFIG_MTRR
+ } else if (!strncmp(this_opt, "nomtrr", 6)) {
+ nomtrr = 1;
+#endif
+ } else if (!strncmp(this_opt, "noaccel", 7)) {
+ noaccel = 1;
} else {
mode = this_opt;
}
@@ -1474,6 +1507,12 @@ module_param(lowhsync, bool, 0);
MODULE_PARM_DESC(lowhsync, "Force horizontal sync low regardless of mode");
module_param(lowvsync, bool, 0);
MODULE_PARM_DESC(lowvsync, "Force vertical sync low regardless of mode");
+module_param(noaccel, bool, 0);
+MODULE_PARM_DESC(noaccel, "Disable acceleration");
+#ifdef CONFIG_MTRR
+module_param(nomtrr, bool, 0);
+MODULE_PARM_DESC(nomtrr, "Disable MTRR support (0 or 1=disabled) (default=0)");
+#endif
MODULE_AUTHOR("Jim Hague <jim.hague@acm.org>");
MODULE_DESCRIPTION("Permedia2 framebuffer device driver");
[-- Attachment #2: pm2fb-mtrr.diff --]
[-- Type: text/plain, Size: 3204 bytes --]
From: Krzysztof Helt <krzysztof.h1@wp.pl>
This patch adds usage of MTRR registers and two new options: noaccel and nomtrr.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
---
--- linux-2.6.21.old/drivers/video/pm2fb.c 2007-06-06 18:44:49.000000000 +0200
+++ linux-2.6.21/drivers/video/pm2fb.c 2007-06-17 21:54:16.009433094 +0200
@@ -38,6 +38,9 @@
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/pci.h>
+#ifdef CONFIG_MTRR
+#include <asm/mtrr.h>
+#endif
#include <video/permedia2.h>
#include <video/cvisionppc.h>
@@ -71,8 +74,13 @@ static char *mode __devinitdata = NULL;
* these flags allow the user to specify that requests for +ve sync
* should be silently turned in -ve sync.
*/
-static int lowhsync;
-static int lowvsync;
+static int lowhsync __devinitdata;
+static int lowvsync __devinitdata;
+static int noaccel __devinitdata;
+/* mtrr option */
+#ifdef CONFIG_MTRR
+static int nomtrr __devinitdata;
+#endif
/*
* The hardware state of the graphics card that isn't part of the
@@ -88,6 +96,7 @@ struct pm2fb_par
u32 mem_control; /* MemControl reg at probe */
u32 boot_address; /* BootAddress reg at probe */
u32 palette[16];
+ int mtrr_handle;
};
/*
@@ -1316,6 +1325,14 @@ static int __devinit pm2fb_probe(struct
goto err_exit_mmio;
}
+#ifdef CONFIG_MTRR
+ if (!nomtrr)
+ default_par->mtrr_handle =
+ mtrr_add(pm2fb_fix.smem_start,
+ pm2fb_fix.smem_len,
+ MTRR_TYPE_WRCOMB, 1);
+#endif
+
info->fbops = &pm2fb_ops;
info->fix = pm2fb_fix;
info->pseudo_palette = default_par->palette;
@@ -1324,6 +1341,11 @@ static int __devinit pm2fb_probe(struct
FBINFO_HWACCEL_COPYAREA |
FBINFO_HWACCEL_FILLRECT;
+ if (noaccel) {
+ printk(KERN_DEBUG "disabling acceleration\n");
+ info->flags |= FBINFO_HWACCEL_DISABLED;
+ }
+
if (!mode)
mode = "640x480@60";
@@ -1375,6 +1397,11 @@ static void __devexit pm2fb_remove(struc
unregister_framebuffer(info);
+#ifdef CONFIG_MTRR
+ if (par->mtrr_handle >= 0)
+ mtrr_del(par->mtrr_handle, info->fix.smem_start,
+ info->fix.smem_len);
+#endif /* CONFIG_MTRR */
iounmap(info->screen_base);
release_mem_region(fix->smem_start, fix->smem_len);
iounmap(par->v_regs);
@@ -1430,6 +1457,12 @@ static int __init pm2fb_setup(char *opti
lowhsync = 1;
} else if(!strcmp(this_opt, "lowvsync")) {
lowvsync = 1;
+#ifdef CONFIG_MTRR
+ } else if (!strncmp(this_opt, "nomtrr", 6)) {
+ nomtrr = 1;
+#endif
+ } else if (!strncmp(this_opt, "noaccel", 7)) {
+ noaccel = 1;
} else {
mode = this_opt;
}
@@ -1474,6 +1507,12 @@ module_param(lowhsync, bool, 0);
MODULE_PARM_DESC(lowhsync, "Force horizontal sync low regardless of mode");
module_param(lowvsync, bool, 0);
MODULE_PARM_DESC(lowvsync, "Force vertical sync low regardless of mode");
+module_param(noaccel, bool, 0);
+MODULE_PARM_DESC(noaccel, "Disable acceleration");
+#ifdef CONFIG_MTRR
+module_param(nomtrr, bool, 0);
+MODULE_PARM_DESC(nomtrr, "Disable MTRR support (0 or 1=disabled) (default=0)");
+#endif
MODULE_AUTHOR("Jim Hague <jim.hague@acm.org>");
MODULE_DESCRIPTION("Permedia2 framebuffer device driver");
[-- Attachment #3: Type: text/plain, Size: 286 bytes --]
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
[-- Attachment #4: Type: text/plain, Size: 182 bytes --]
_______________________________________________
Linux-fbdev-devel mailing list
Linux-fbdev-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-fbdev-devel
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-06-17 20:19 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-06-17 20:21 [PATCH] pm2fb: mtrr support and noaccel option Krzysztof Helt
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.