[lm-sensors] Odp: Sensors working on DL360?

[lm-sensors] Odp: Sensors working on DL360?

[Krzysztof Helt]

Dnia 6-07-2007 o godz. 9:38 Bart van Kuik napisa³(a):
> Hi list,
> 
> I'm trying to get sensor readouts on a Compaq DL360 (not the
later HP
> branded ones, but the series with a Pentium 3).

My bet it uses thmc50 driver which is just being ported to 2.6.
You can download my latest patch and try.

It does not work with lmsensors 2.x, you need to download the
latest lmsensors 3 branch.

It is I2C sensor. The I2C sensors were not scanned by your
detection script for unknown reason.

Regards,
Krzysztof


----------------------------------------------------
Zobacz, co mówi± wakacyjne przepowiednie tarota.
Czy bêd± to wakacje Twoich marzeñ?
http://klik.wp.pl/?adr=http%3A%2F%2Fadv.reklama.wp.pl%2Fas%2Fd116.html&sid\x1215



_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

Re: [lm-sensors] Odp: Sensors working on DL360?

[Bart van Kuik]

Hi Krzysztof,

>> I'm trying to get sensor readouts on a Compaq DL360
> My bet it uses thmc50 driver which is just being ported to 2.6.

I must be doing something wrong. I've retrieved the latest lm-sensors code
from SVN using

    svn checkout http://lm-sensors.org/svn/lm-sensors/trunk lm-sensors

Then compiled and installed with "make user && make user_install". But I
don't get results:

    # sensors -c /etc/sensors.conf "thmc-*"
    Specified sensor(s) not found!

Also, can I visually identify this chipset somehow on the motherboard?
I've tried to look for an IC marked "TI", but couldn't find it.

Output of lsmod is here:
    http://www.vankuik.nl/download/lsmod_output

Output of "uname -r" is:

    2.6.18-8.1.6.el5xen

Any ideas?

Bart



_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

Re: [lm-sensors] Odp: Sensors working on DL360?

[Krzysztof Helt]

On Fri, 6 Jul 2007 15:57:22 +0200 (CEST)
"Bart van Kuik" <lmsensors@vankuik.nl> wrote:

> Hi Krzysztof,
> 
> Then compiled and installed with "make user && make user_install". But I
> don't get results:
> 
>     # sensors -c /etc/sensors.conf "thmc-*"
>     Specified sensor(s) not found!
> 

There is no thmc50 module in the 2.6.18 kernel. You need to download the patch from the
list and compile the kernel by yourself. If you need help, please email me directly.

> Also, can I visually identify this chipset somehow on the motherboard?
> I've tried to look for an IC marked "TI", but couldn't find it.
> 
I have a Compaq motherboard from the same era (dual Pentium3) and it uses ADM1022 chip
(which is also handled by thmc50 driver). A manufacturer marking is a small Analog
Devices logo (white square with black triangle) in the middle of the chip. The top line
says "1022" or "1022A" (it depends on chip revision). The chips are quite small about
6x4 mm and at least one should be located next to CPU slots (the one which controls CPU
temperature).

It would be great if you can confirm that the DL360 uses this chip type (or maybe not
use).

Regards,
Krzysztof

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

Re: [lm-sensors] Odp: Sensors working on DL360?

[Bart van Kuik]

> Devices logo (white square with black triangle) in the middle of the chip.
> The top line says "1022" or "1022A" (it depends on chip revision).

Yeah, it's there and I made a photo of it. It's right in the middle of the
picture:

  http://www.vankuik.nl/download/1022a_on_compaq_dl360_motherboard

I found only one and I looked pretty thoroughly. Anyway, it's not even
_close_ to the CPU sockets (two sockets, one taken), a bit funny that.

Some ASCII art

 -------------Casing-------------
 |                              |
 |                              |
 |           --------           |
 |           |      |           |
 |           |      --Mobo----  |
 |           |               |  |
 |           |               |  |
 |           |               |  |
 |           |               |  |
 |           |           CPU0|  |
 |           | Sens          |  |
 |           |           CPU1|  |
 |           |               |  |
 |           |               |  |
 |           -----------------  |
 --------------------------------


I'm going to try and compile the patch.

B


_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

Re: [lm-sensors] Odp: Sensors working on DL360?

[Ivo Manca]

Hey Bart,

>> It does not work with lmsensors 2.x, you need to download the
>> latest lmsensors 3 branch.

> I must be doing something wrong. I've retrieved the latest lm-sensors 
> code
> from SVN using
>
>    svn checkout http://lm-sensors.org/svn/lm-sensors/trunk lm-sensors

Just a wild guess, but doesn't
"svn checkout http://lm-sensors.org/svn/lm-sensors/trunk lm-sensors" 
checks out the 2.x branch?

As far as I know, you need "svn checkout 
http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0" for the 
3.0.0 branch.
Not sure if it makes a difference, but might be worth a shot :)

--
Ivo Manca

----- Original Message ----- 
From: "Bart van Kuik" <lmsensors@vankuik.nl>
To: "Krzysztof Helt" <krzysztof.h1@wp.pl>
Cc: "LM Sensors" <lm-sensors@lm-sensors.org>
Sent: Friday 6 July 2007 15:57
Subject: Re: [lm-sensors] Odp: Sensors working on DL360?


> Hi Krzysztof,
>
>>> I'm trying to get sensor readouts on a Compaq DL360
>> My bet it uses thmc50 driver which is just being ported to 2.6.
>
> I must be doing something wrong. I've retrieved the latest lm-sensors 
> code
> from SVN using
>
>    svn checkout http://lm-sensors.org/svn/lm-sensors/trunk lm-sensors
>
> Then compiled and installed with "make user && make user_install". But 
> I
> don't get results:
>
>    # sensors -c /etc/sensors.conf "thmc-*"
>    Specified sensor(s) not found!
>
> Also, can I visually identify this chipset somehow on the motherboard?
> I've tried to look for an IC marked "TI", but couldn't find it.
>
> Output of lsmod is here:
>    http://www.vankuik.nl/download/lsmod_output
>
> Output of "uname -r" is:
>
>    2.6.18-8.1.6.el5xen
>
> Any ideas?
>
> Bart
>
>
>
> _______________________________________________
> lm-sensors mailing list
> lm-sensors@lm-sensors.org
> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors 


_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors