[PATCH] mbxfb: Improvements and new features

[PATCH] mbxfb: Improvements and new features

[Raphaël Assénat]

[-- Attachment #1: Type: text/plain, Size: 647 bytes --]

The patch attached to this e-mail contains the following changes:

* Overlay surface alpha is configured separately from the overlay. This
prevents display glitches (configure and fill the overlay first, set
alpha to a visible value next)

* Added an ioctl for configuring transparency of the Overlay and graphics
planes. Blend mode, colorkey mode and global alpha mode are supported.

* Added an ioctl for setting the plane order. The overlay plance can be placed 
over or
under the graphics plane.

* Added an ioctl for setting and reading chip registers, with mask.

* Updated copyright for 2007

Signed-off-by: Raphael Assenat <raph@8d.com>



[-- Attachment #2: 2700g_latest.diff --]
[-- Type: text/plain, Size: 21832 bytes --]

This patch contains the following changes:

* Overlay surface alpha is configured separately from the overlay. This
prevents display glitches (configure and fill the overlay first, set
alpha to a visible value next)

* Added an ioctl for configuring transparency of the Overlay and graphics 
planes. Blend mode, colorkey mode and global alpha mode are supported.

* Added an ioctl for setting the plane order. The overlay plance can be placed over or
under the graphics plane.

* Added an ioctl for setting and reading chip registers, with mask.

* Changed M24CLK address to 0x00000050 instead of 0x00000054

* Updated copyright for 2007

Signed-off-by: Raphael Assenat <raph@8d.com>
diff -Nru linux-2.6.22/drivers/video/mbx/regs.h linux-2.6.22-8d/drivers/video/mbx/regs.h
--- linux-2.6.22/drivers/video/mbx/regs.h	2007-05-25 22:55:14.000000000 -0400
+++ linux-2.6.22-8d/drivers/video/mbx/regs.h	2007-05-28 09:35:27.000000000 -0400
@@ -30,7 +30,7 @@
 #define VOVRCLK		__REG_2700G(0x00000044)
 #define PIXCLK		__REG_2700G(0x00000048)
 #define MEMCLK		__REG_2700G(0x0000004c)
-#define M24CLK		__REG_2700G(0x00000054)
+#define M24CLK		__REG_2700G(0x00000050)
 #define MBXCLK		__REG_2700G(0x00000054)
 #define SDCLK		__REG_2700G(0x00000058)
 #define PIXCLKDIV	__REG_2700G(0x0000005c)

diff -Nru linux-2.6.22/drivers/video/mbx/mbxfb.c linux-2.6.22-8d/drivers/video/mbx/mbxfb.c
--- linux-2.6.22/drivers/video/mbx/mbxfb.c	2007-05-25 22:55:14.000000000 -0400
+++ linux-2.6.22-8d/drivers/video/mbx/mbxfb.c	2007-05-28 09:35:27.000000000 -0400
@@ -1,7 +1,7 @@
 /*
  *  linux/drivers/video/mbx/mbxfb.c
  *
- *  Copyright (C) 2006 8D Technologies inc
+ *  Copyright (C) 2006-2007 8D Technologies inc
  *  Raphael Assenat <raph@8d.com>
  *  	- Added video overlay support
  *  	- Various improvements
@@ -139,7 +139,7 @@
 	 * N: 1 to 7
 	 * P: 0 to 7
 	 */
-
+	
 	/* RAPH: When N==1, the resulting pixel clock appears to
 	 * get divided by 2. Preventing N=1 by starting the following
 	 * loop at 2 prevents this. Is this a bug with my chip
@@ -334,8 +334,8 @@
 
 static int mbxfb_setupOverlay(struct mbxfb_overlaySetup *set)
 {
-	u32 vsctrl, vbbase, vscadr, vsadr;
-	u32 sssize, spoctrl, svctrl, shctrl;
+	u32 vsctrl, vscadr, vsadr; 
+	u32 sssize, spoctrl, shctrl;
 	u32 vubase, vvbase;
 	u32 vovrclk;
 
@@ -349,14 +349,12 @@
 	vscadr = readl(VSCADR);
 	vubase = readl(VUBASE);
 	vvbase = readl(VVBASE);
+	shctrl = readl(SHCTRL);
 
 	spoctrl = readl(SPOCTRL);
 	sssize = readl(SSSIZE);
 
-
-	vbbase = Vbbase_Glalpha(set->alpha);
-
-	vsctrl &= ~(	FMsk(VSCTRL_VSWIDTH) |
+	vsctrl &= ~(	FMsk(VSCTRL_VSWIDTH) | 
 					FMsk(VSCTRL_VSHEIGHT) |
 					FMsk(VSCTRL_VPIXFMT) |
 					VSCTRL_GAMMA_EN | VSCTRL_CSC_EN |
@@ -364,19 +362,23 @@
 	vsctrl |= Vsctrl_Width(set->width) | Vsctrl_Height(set->height) |
 				VSCTRL_CSC_EN;
 
-	vscadr &= ~(VSCADR_STR_EN | VSCADR_COLKEY_EN | VSCADR_COLKEYSRC |
-				FMsk(VSCADR_BLEND_M) | FMsk(VSCADR_BLEND_POS) |
-				FMsk(VSCADR_VBASE_ADR) );
+	vscadr &= ~(VSCADR_STR_EN | FMsk(VSCADR_VBASE_ADR) );
 	vubase &= ~(VUBASE_UVHALFSTR | FMsk(VUBASE_UBASE_ADR));
 	vvbase &= ~(FMsk(VVBASE_VBASE_ADR));
 
 	switch (set->fmt)
 	{
-		case MBXFB_FMT_YUV12:
+		case MBXFB_FMT_YUV16:
 			vsctrl |= VSCTRL_VPIXFMT_YUV12;
 
 			set->Y_stride = ((set->width) + 0xf ) & ~0xf;
+			break;
+		case MBXFB_FMT_YUV12:
+			vsctrl |= VSCTRL_VPIXFMT_YUV12;
 
+			set->Y_stride = ((set->width) + 0xf ) & ~0xf;
+			vubase |= VUBASE_UVHALFSTR;
+			
 			break;
 		case MBXFB_FMT_UY0VY1:
 			vsctrl |= VSCTRL_VPIXFMT_UY0VY1;
@@ -398,18 +400,18 @@
 			return -EINVAL;
 	}
 
-	/* VSCTRL has the bits which sets the Video Pixel Format.
-	 * When passing from a packed to planar format,
+	/* VSCTRL has the bits which sets the Video Pixel Format. 
+	 * When passing from a packed to planar format, 
 	 * if we write VSCTRL first, VVBASE and VUBASE would
 	 * be zero if we would not set them here. (And then,
 	 * the chips hangs and only a reset seems to fix it).
-	 *
-	 * If course, the values calculated here have no meaning
+	 * 
+	 * If course, the values calculated here have no meaning 
 	 * for packed formats.
 	 */
 	set->UV_stride = ((set->width/2) + 0x7 ) & ~0x7;
 		set->U_offset = set->height * set->Y_stride;
-		set->V_offset = set->U_offset +
+		set->V_offset = set->U_offset + 
 						set->height * set->UV_stride;
 	vubase |= Vubase_Ubase_Adr(
 			(0x60000 + set->mem_offset + set->U_offset)>>3);
@@ -417,8 +419,7 @@
 			(0x60000 + set->mem_offset + set->V_offset)>>3);
 
 
-	vscadr |= VSCADR_BLEND_VID | VSCADR_BLEND_GLOB |
-		Vscadr_Vbase_Adr((0x60000 + set->mem_offset)>>4);
+	vscadr |= Vscadr_Vbase_Adr((0x60000 + set->mem_offset)>>4);
 
 	if (set->enable)
 		vscadr |= VSCADR_STR_EN;
@@ -428,14 +429,13 @@
 		Vsadr_Xstart(set->x) | Vsadr_Ystart(set->y);
 
 	sssize &= ~(FMsk(SSSIZE_SC_WIDTH) | FMsk(SSSIZE_SC_HEIGHT));
-	sssize = Sssize_Sc_Width(set->scaled_width-1) |
-			Sssize_Sc_Height(set->scaled_height-1);
+	sssize = Sssize_Sc_Width(set->scaled_width-1) | 
+			Sssize_Sc_Height(set->scaled_height-1);	
 
-	spoctrl &= ~(SPOCTRL_H_SC_BP | SPOCTRL_V_SC_BP |
-			SPOCTRL_HV_SC_OR | SPOCTRL_VS_UR_C |
-			FMsk(SPOCTRL_VORDER) | FMsk(SPOCTRL_VPITCH));
-	spoctrl = Spoctrl_Vpitch((set->height<<11)/set->scaled_height)
-							| SPOCTRL_VORDER_2TAP;
+	spoctrl &= ~(SPOCTRL_H_SC_BP | SPOCTRL_V_SC_BP | 
+			SPOCTRL_HV_SC_OR | SPOCTRL_VS_UR_C | 
+			FMsk(SPOCTRL_VPITCH));
+	spoctrl |= Spoctrl_Vpitch((set->height<<11)/set->scaled_height);
 
 	/* Bypass horiz/vert scaler when same size */
 	if (set->scaled_width == set->width)
@@ -443,14 +443,11 @@
 	if (set->scaled_height == set->height)
 		spoctrl |= SPOCTRL_V_SC_BP;
 
-	svctrl = Svctrl_Initial1(1<<10) | Svctrl_Initial2(1<<10);
-
-	shctrl = Shctrl_Hinitial(4<<11)
-			| Shctrl_Hpitch((set->width<<11)/set->scaled_width);
+	shctrl &= ~(FMsk(SHCTRL_HPITCH) | SHCTRL_HDECIM);
+	shctrl |= Shctrl_Hpitch((set->width<<11)/set->scaled_width);
 
-	/* Video plane registers */
+	/* Video plane registers */	
 	write_reg(vsctrl, VSCTRL);
-	write_reg(vbbase, VBBASE);
 	write_reg(vscadr, VSCADR);
 	write_reg(vubase, VUBASE);
 	write_reg(vvbase, VVBASE);
@@ -459,30 +456,10 @@
 	/* Video scaler registers */
 	write_reg(sssize, SSSIZE);
 	write_reg(spoctrl, SPOCTRL);
-	write_reg(svctrl, SVCTRL);
 	write_reg(shctrl, SHCTRL);
 
-	/* RAPH: Using those coefficients, the scaled
-	 * image is quite blurry. I dont know how
-	 * to improve them ; The chip documentation
-	 * was not helpful.. */
-	write_reg(0x21212121, VSCOEFF0);
-	write_reg(0x21212121, VSCOEFF1);
-	write_reg(0x21212121, VSCOEFF2);
-	write_reg(0x21212121, VSCOEFF3);
-	write_reg(0x21212121, VSCOEFF4);
-	write_reg(0x00000000, HSCOEFF0);
-	write_reg(0x00000000, HSCOEFF1);
-	write_reg(0x00000000, HSCOEFF2);
-	write_reg(0x03020201, HSCOEFF3);
-	write_reg(0x09070604, HSCOEFF4);
-	write_reg(0x0f0e0c0a, HSCOEFF5);
-	write_reg(0x15141211, HSCOEFF6);
-	write_reg(0x19181716, HSCOEFF7);
-	write_reg(0x00000019, HSCOEFF8);
-
 	/* Clock */
-	if (set->enable)
+	if (set->enable) 
 		vovrclk |= 1;
 	else
 		vovrclk &= ~1;
@@ -492,27 +469,210 @@
 	return 0;
 }
 
+static int mbxfb_ioctl_planeorder(struct mbxfb_planeorder *porder)
+{
+	unsigned long gscadr, vscadr;
+
+	if (porder->bottom == porder->top)
+		return -EINVAL;
+
+	gscadr = readl(GSCADR);
+	vscadr = readl(VSCADR);
+	
+	gscadr &= ~(FMsk(GSCADR_BLEND_POS));
+	vscadr &= ~(FMsk(VSCADR_BLEND_POS));
+
+	switch(porder->bottom)
+	{
+		case MBXFB_PLANE_GRAPHICS:
+			gscadr |= GSCADR_BLEND_GFX;
+			break;
+		case MBXFB_PLANE_VIDEO:
+			vscadr |= VSCADR_BLEND_GFX;
+			break;
+		default:
+			return -EINVAL;
+	}
+
+	switch (porder->top)
+	{
+		case MBXFB_PLANE_GRAPHICS:
+			gscadr |= GSCADR_BLEND_VID;
+			break;
+		case MBXFB_PLANE_VIDEO:
+			vscadr |= GSCADR_BLEND_VID;
+			break;
+		default:
+			return -EINVAL;
+	}
+	
+	write_reg_dly(vscadr, VSCADR);
+	write_reg_dly(gscadr, GSCADR);
+	
+	return 0;
+	
+}
+
+static int mbxfb_ioctl_alphactl(struct mbxfb_alphaCtl *alpha)
+{
+	unsigned long vscadr, vbbase, vcmsk;
+	unsigned long gscadr, gbbase, gdrctrl;
+
+	vbbase = Vbbase_Glalpha(alpha->overlay_global_alpha) |
+				Vbbase_Colkey(alpha->overlay_colorkey);
+
+	gbbase = Gbbase_Glalpha(alpha->graphics_global_alpha) |
+				Gbbase_Colkey(alpha->graphics_colorkey);
+
+	vcmsk = readl(VCMSK);
+	vcmsk &= ~(FMsk(VCMSK_COLKEY_M));
+	vcmsk |= Vcmsk_colkey_m(alpha->overlay_colorkey_mask);
+
+	gdrctrl = readl(GDRCTRL);
+	gdrctrl &= ~(FMsk(GDRCTRL_COLKEYM));
+	gdrctrl |= Gdrctrl_Colkeym(alpha->graphics_colorkey_mask);
+
+	vscadr = readl(VSCADR);
+	vscadr &= ~(FMsk(VSCADR_BLEND_M) | VSCADR_COLKEYSRC | VSCADR_COLKEY_EN);
+
+	gscadr = readl(GSCADR);
+	gscadr &= ~(FMsk(GSCADR_BLEND_M) | GSCADR_COLKEY_EN | GSCADR_COLKEYSRC);
+	
+	switch(alpha->overlay_colorkey_mode)
+	{
+		case MBXFB_COLORKEY_DISABLED:
+			break;
+		case MBXFB_COLORKEY_PREVIOUS:
+			vscadr |= VSCADR_COLKEY_EN;
+			break;
+		case MBXFB_COLORKEY_CURRENT:
+			vscadr |= VSCADR_COLKEY_EN | VSCADR_COLKEYSRC;
+			break;
+		default:
+			return -EINVAL;
+	}
+	switch(alpha->overlay_blend_mode)
+	{
+		case MBXFB_ALPHABLEND_NONE:
+			vscadr |= VSCADR_BLEND_NONE;
+			break;
+		case MBXFB_ALPHABLEND_GLOBAL:
+			vscadr |= VSCADR_BLEND_GLOB;
+			break;
+		case MBXFB_ALPHABLEND_PIXEL:
+			vscadr |= VSCADR_BLEND_PIX;
+			break;
+		default:
+			return -EINVAL;
+	}
+		
+	switch(alpha->graphics_colorkey_mode)
+	{
+		case MBXFB_COLORKEY_DISABLED:
+			break;
+		case MBXFB_COLORKEY_PREVIOUS:
+			gscadr |= GSCADR_COLKEY_EN;
+			break;
+		case MBXFB_COLORKEY_CURRENT:
+			gscadr |= GSCADR_COLKEY_EN | GSCADR_COLKEYSRC;
+			break;
+		default:
+			return -EINVAL;
+	}
+	switch(alpha->graphics_blend_mode)
+	{
+		case MBXFB_ALPHABLEND_NONE:
+			gscadr |= GSCADR_BLEND_NONE;
+			break;
+		case MBXFB_ALPHABLEND_GLOBAL:
+			gscadr |= GSCADR_BLEND_GLOB;
+			break;
+		case MBXFB_ALPHABLEND_PIXEL:
+			gscadr |= GSCADR_BLEND_PIX;
+			break;
+		default:
+			return -EINVAL;
+	}
+
+	write_reg_dly(vbbase, VBBASE);	
+	write_reg_dly(gbbase, GBBASE);	
+	write_reg_dly(vcmsk, VCMSK);	
+	write_reg_dly(gdrctrl, GDRCTRL);	
+	write_reg_dly(gscadr, GSCADR);	
+	write_reg_dly(vscadr, VSCADR);
+
+	return 0;
+}
+
 static int mbxfb_ioctl(struct fb_info *info, unsigned int cmd,
 				unsigned long arg)
 {
-	struct mbxfb_overlaySetup setup;
+	struct mbxfb_overlaySetup	setup;
+	struct mbxfb_planeorder 	porder;
+	struct mbxfb_alphaCtl 		alpha;
+	struct mbxfb_reg			reg;
 	int res;
+	__u32 tmp;
 
-	if (cmd == MBXFB_IOCX_OVERLAY)
+	switch (cmd)
 	{
-		if (copy_from_user(&setup, (void __user*)arg,
-					sizeof(struct mbxfb_overlaySetup)))
+		case MBXFB_IOCX_OVERLAY:
+			if (copy_from_user(&setup, (void __user*)arg,
+						sizeof(struct mbxfb_overlaySetup)))
+				return -EFAULT;
+
+			res = mbxfb_setupOverlay(&setup);	
+			if (res)
+				return res;
+
+			if (copy_to_user((void __user*)arg, &setup,
+						sizeof(struct mbxfb_overlaySetup)))
+				return -EFAULT;
+
+			return 0;
+
+		case MBXFB_IOCS_PLANEORDER:
+			if (copy_from_user(&porder, (void __user*)arg,
+					sizeof(struct mbxfb_planeorder)))
 			return -EFAULT;
 
-		res = mbxfb_setupOverlay(&setup);
-		if (res)
-			return res;
+			return mbxfb_ioctl_planeorder(&porder);
 
-		if (copy_to_user((void __user*)arg, &setup,
-					sizeof(struct mbxfb_overlaySetup)))
+		case MBXFB_IOCS_ALPHA:
+			if (copy_from_user(&alpha, (void __user*)arg,
+					sizeof(struct mbxfb_alphaCtl)))
 			return -EFAULT;
 
-		return 0;
+			return mbxfb_ioctl_alphactl(&alpha);
+
+		case MBXFB_IOCS_REG:
+			if (copy_from_user(&reg, (void __user*)arg,
+						sizeof(struct mbxfb_reg)))
+				return -EFAULT;
+
+			if (reg.addr >= 0x10000) /* regs are from 0x3fe0000 to 0x3feffff */ 
+				return -EINVAL;
+
+			tmp = readl(virt_base_2700 + reg.addr);
+			tmp &= ~reg.mask;
+			tmp |= reg.val & reg.mask;
+			writel(tmp, virt_base_2700 + reg.addr);
+
+			return 0;
+		case MBXFB_IOCX_REG:
+			if (copy_from_user(&reg, (void __user*)arg,
+						sizeof(struct mbxfb_reg)))
+				return -EFAULT;
+
+			if (reg.addr >= 0x10000)	/* regs are from 0x3fe0000 to 0x3feffff */
+				return -EINVAL;
+			reg.val = readl(virt_base_2700 + reg.addr);
+
+			if (copy_to_user((void __user*)arg, &reg,
+						sizeof(struct mbxfb_reg)))
+				return -EFAULT;
+
+			return 0;			
 	}
 	return -EINVAL;
 }
@@ -558,7 +718,6 @@
 	       LMTYPE);
 	/* enable memory controller */
 	write_reg_dly(LMPWR_MC_PWR_ACT, LMPWR);
-
 	/* perform dummy reads */
 	for ( i = 0; i < 16; i++ ) {
 		tmp = readl(fbi->screen_base);
@@ -571,8 +730,8 @@
 	write_reg_dly(SYSCLKSRC_PLL_2, SYSCLKSRC);
 	write_reg_dly(PIXCLKSRC_PLL_1, PIXCLKSRC);
 	write_reg_dly(0x00000000, CLKSLEEP);
-
-	/* PLL output = (Frefclk * M) / (N * 2^P )
+	
+	/* PLL output = (Frefclk * M) / (N * 2^P ) 
 	 *
 	 * M: 0x17, N: 0x3, P: 0x0 == 100 Mhz!
 	 * M: 0xb, N: 0x1, P: 0x1 == 71 Mhz
@@ -580,7 +739,7 @@
 	write_reg_dly((Core_Pll_M(0xb) | Core_Pll_N(0x1) | Core_Pll_P(0x1) |
 		CORE_PLL_EN),
 	       COREPLL);
-
+	
 	write_reg_dly((Disp_Pll_M(0x1b) | Disp_Pll_N(0x7) | Disp_Pll_P(0x1) |
 		DISP_PLL_EN),
 	       DISPPLL);
@@ -588,8 +747,8 @@
 	write_reg_dly(0x00000000, VOVRCLK);
 	write_reg_dly(PIXCLK_EN, PIXCLK);
 	write_reg_dly(MEMCLK_EN, MEMCLK);
-	write_reg_dly(0x00000006, M24CLK);
-	write_reg_dly(0x00000006, MBXCLK);
+	write_reg_dly(0x00000001, M24CLK);
+	write_reg_dly(0x00000001, MBXCLK);
 	write_reg_dly(SDCLK_EN, SDCLK);
 	write_reg_dly(0x00000001, PIXCLKDIV);
 }
@@ -597,6 +756,7 @@
 static void __devinit setup_graphics(struct fb_info *fbi)
 {
 	unsigned long gsctrl;
+	unsigned long vscadr;
 
 	gsctrl = GSCTRL_GAMMA_EN | Gsctrl_Width(fbi->var.xres) |
 		Gsctrl_Height(fbi->var.yres);
@@ -620,6 +780,11 @@
 	write_reg_dly(0x00ffffff, GDRCTRL);
 	write_reg_dly((GSCADR_STR_EN | Gscadr_Gbase_Adr(0x6000)), GSCADR);
 	write_reg_dly(0x00000000, GPLUT);
+
+	vscadr = readl(VSCADR);
+	vscadr &= ~(FMsk(VSCADR_BLEND_POS) | FMsk(VSCADR_BLEND_M));
+	vscadr |= VSCADR_BLEND_VID | VSCADR_BLEND_NONE;
+	write_reg_dly(vscadr, VSCADR);
 }
 
 static void __devinit setup_display(struct fb_info *fbi)
@@ -638,13 +803,47 @@
 
 static void __devinit enable_controller(struct fb_info *fbi)
 {
+	u32 svctrl, shctrl;
+		
 	write_reg_dly(SYSRST_RST, SYSRST);
 
+	/* setup a timeout, raise drive strength */
+	write_reg_dly(0xffffff0c, SYSCFG);
 
 	enable_clocks(fbi);
 	setup_memc(fbi);
 	setup_graphics(fbi);
 	setup_display(fbi);
+
+	shctrl = readl(SHCTRL);
+	shctrl &= ~(FMsk(SHCTRL_HINITIAL));
+	shctrl |= Shctrl_Hinitial(4<<11);
+	writel(shctrl, SHCTRL);
+
+	svctrl = Svctrl_Initial1(1<<10) | Svctrl_Initial2(1<<10);
+	writel(svctrl, SVCTRL);
+
+	writel(SPOCTRL_H_SC_BP | SPOCTRL_V_SC_BP | SPOCTRL_VORDER_4TAP
+			, SPOCTRL);
+
+	/* Those coefficients are good for scaling up. For scaling
+	 * down, the application has to calculate them. */
+	write_reg(0xff000100, VSCOEFF0);
+	write_reg(0xfdfcfdfe, VSCOEFF1);
+	write_reg(0x170d0500, VSCOEFF2);
+	write_reg(0x3d372d22, VSCOEFF3);
+	write_reg(0x00000040, VSCOEFF4);
+	
+	write_reg(0xff010100, HSCOEFF0);
+	write_reg(0x00000000, HSCOEFF1);
+	write_reg(0x02010000, HSCOEFF2);
+	write_reg(0x01020302, HSCOEFF3);
+	write_reg(0xf9fbfe00, HSCOEFF4);
+	write_reg(0xfbf7f6f7, HSCOEFF5);
+	write_reg(0x1c110700, HSCOEFF6);
+	write_reg(0x3e393127, HSCOEFF7);
+	write_reg(0x00000040, HSCOEFF8);
+
 }
 
 #ifdef CONFIG_PM
diff -Nru linux-2.6.22/drivers/video/mbx/reg_bits.h linux-2.6.22-8d/drivers/video/mbx/reg_bits.h
--- linux-2.6.22/drivers/video/mbx/reg_bits.h	2007-05-25 22:55:14.000000000 -0400
+++ linux-2.6.22-8d/drivers/video/mbx/reg_bits.h	2007-05-28 09:35:27.000000000 -0400
@@ -215,7 +215,7 @@
 /* GSCADR graphics stream control address register fields */
 #define GSCADR_STR_EN	(1 << 31)
 #define GSCADR_COLKEY_EN	(1 << 30)
-#define GSCADR_COLKEYSCR	(1 << 29)
+#define GSCADR_COLKEYSRC	(1 << 29)
 #define GSCADR_BLEND_M	Fld(2,27)
 #define GSCADR_BLEND_NONE	((0x0) << FShft(GSCADR_BLEND_M))
 #define GSCADR_BLEND_INV	((0x1) << FShft(GSCADR_BLEND_M))
@@ -303,6 +303,67 @@
 #define VSADR_YSTART		Fld(11,0)
 #define Vsadr_Ystart(x)		((x) << FShft(VSADR_YSTART))
 
+/* VSCTRL - Video Surface Control Register */
+#define VSCTRL_VPIXFMT		Fld(4,27)
+#define VSCTRL_VPIXFMT_YUV12	((0x9) << FShft(VSCTRL_VPIXFMT))
+#define VSCTRL_VPIXFMT_UY0VY1	((0xc) << FShft(VSCTRL_VPIXFMT))
+#define VSCTRL_VPIXFMT_VY0UY1	((0xd) << FShft(VSCTRL_VPIXFMT))
+#define VSCTRL_VPIXFMT_Y0UY1V	((0xe) << FShft(VSCTRL_VPIXFMT))
+#define VSCTRL_VPIXFMT_Y0VY1U	((0xf) << FShft(VSCTRL_VPIXFMT))
+#define VSCTRL_GAMMA_EN		(1 << 26)
+#define VSCTRL_CSC_EN		(1 << 25)
+#define VSCTRL_COSITED		(1 << 22)
+#define VSCTRL_VSWIDTH		Fld(11,11)
+#define Vsctrl_Width(Pixels) /* Video Width [1-2048] */ \
+			(((Pixels) - 1) << FShft(VSCTRL_VSWIDTH))
+#define VSCTRL_VSHEIGHT		Fld(11,0)
+#define Vsctrl_Height(Pixels) /* Video Height [1-2048] */ \
+			(((Pixels) - 1) << FShft(VSCTRL_VSHEIGHT))
+
+/* VBBASE - Video Blending Base Register */
+#define VBBASE_GLALPHA		Fld(8,24)
+#define Vbbase_Glalpha(x)	((x) << FShft(VBBASE_GLALPHA))
+
+#define VBBASE_COLKEY		Fld(24,0)
+#define Vbbase_Colkey(x)	((x) << FShft(VBBASE_COLKEY))
+
+/* VCMSK - Video Color Key Mask Register */
+#define VCMSK_COLKEY_M		Fld(24,0)
+#define Vcmsk_colkey_m(x)	((x) << FShft(VCMSK_COLKEY_M))
+
+/* VSCADR - Video Stream Control Rddress Register */
+#define VSCADR_STR_EN		(1 << 31)
+#define VSCADR_COLKEY_EN	(1 << 30)
+#define VSCADR_COLKEYSRC	(1 << 29)
+#define VSCADR_BLEND_M		Fld(2,27)
+#define VSCADR_BLEND_NONE	((0x0) << FShft(VSCADR_BLEND_M))
+#define VSCADR_BLEND_INV	((0x1) << FShft(VSCADR_BLEND_M))
+#define VSCADR_BLEND_GLOB	((0x2) << FShft(VSCADR_BLEND_M))
+#define VSCADR_BLEND_PIX	((0x3) << FShft(VSCADR_BLEND_M))
+#define VSCADR_BLEND_POS	Fld(2,24)
+#define VSCADR_BLEND_GFX	((0x0) << FShft(VSCADR_BLEND_POS))
+#define VSCADR_BLEND_VID	((0x1) << FShft(VSCADR_BLEND_POS))
+#define VSCADR_BLEND_CUR	((0x2) << FShft(VSCADR_BLEND_POS))
+#define VSCADR_VBASE_ADR	Fld(23,0)
+#define Vscadr_Vbase_Adr(x)	((x) << FShft(VSCADR_VBASE_ADR))
+
+/* VUBASE - Video U Base Register */
+#define VUBASE_UVHALFSTR	(1 << 31)
+#define VUBASE_UBASE_ADR	Fld(24,0)
+#define Vubase_Ubase_Adr(x)	((x) << FShft(VUBASE_UBASE_ADR))
+
+/* VVBASE - Video V Base Register */
+#define VVBASE_VBASE_ADR	Fld(24,0)
+#define Vvbase_Vbase_Adr(x)	((x) << FShft(VVBASE_VBASE_ADR))
+
+/* VSADR - Video Stride Address Register */
+#define VSADR_SRCSTRIDE		Fld(10,22)
+#define Vsadr_Srcstride(x)	((x) << FShft(VSADR_SRCSTRIDE))
+#define VSADR_XSTART		Fld(11,11)
+#define Vsadr_Xstart(x)		((x) << FShft(VSADR_XSTART))
+#define VSADR_YSTART		Fld(11,0)
+#define Vsadr_Ystart(x)		((x) << FShft(VSADR_YSTART))
+
 /* HCCTRL - Hardware Cursor Register fields */
 #define HCCTRL_CUR_EN	(1 << 31)
 #define HCCTRL_COLKEY_EN	(1 << 29)
@@ -479,6 +540,30 @@
 #define DINTRE_HBLNK1_EN	(1 << 1)
 #define DINTRE_HBLNK0_EN	(1 << 0)
 
+/* DINTRS - Display Interrupt Status Register */
+#define DINTRS_CUR_OR_S		(1 << 18)
+#define DINTRS_STR2_OR_S	(1 << 17)
+#define DINTRS_STR1_OR_S	(1 << 16)
+#define DINTRS_CUR_UR_S		(1 << 6)
+#define DINTRS_STR2_UR_S	(1 << 5)
+#define DINTRS_STR1_UR_S	(1 << 4)
+#define DINTRS_VEVENT1_S	(1 << 3)
+#define DINTRS_VEVENT0_S	(1 << 2)
+#define DINTRS_HBLNK1_S		(1 << 1)
+#define DINTRS_HBLNK0_S		(1 << 0)
+
+/* DINTRE - Display Interrupt Enable Register */
+#define DINTRE_CUR_OR_EN	(1 << 18)
+#define DINTRE_STR2_OR_EN	(1 << 17)
+#define DINTRE_STR1_OR_EN	(1 << 16)
+#define DINTRE_CUR_UR_EN	(1 << 6)
+#define DINTRE_STR2_UR_EN	(1 << 5)
+#define DINTRE_STR1_UR_EN	(1 << 4)
+#define DINTRE_VEVENT1_EN	(1 << 3)
+#define DINTRE_VEVENT0_EN	(1 << 2)
+#define DINTRE_HBLNK1_EN	(1 << 1)
+#define DINTRE_HBLNK0_EN	(1 << 0)
+
 
 /* DLSTS - display load status register */
 #define DLSTS_RLD_ADONE	(1 << 23)
diff -Nru linux-2.6.22/include/video/mbxfb.h linux-2.6.22-8d/include/video/mbxfb.h
--- linux-2.6.22/include/video/mbxfb.h	2007-05-25 22:55:14.000000000 -0400
+++ linux-2.6.22-8d/include/video/mbxfb.h	2007-05-28 09:35:27.000000000 -0400
@@ -29,23 +29,23 @@
 };
 
 /* planar */
-#define MBXFB_FMT_YUV12		0
+#define MBXFB_FMT_YUV16		0
+#define MBXFB_FMT_YUV12		1 
 
 /* packed */
-#define MBXFB_FMT_UY0VY1	1
-#define MBXFB_FMT_VY0UY1	2
-#define MBXFB_FMT_Y0UY1V	3
-#define MBXFB_FMT_Y0VY1U	4
+#define MBXFB_FMT_UY0VY1	2
+#define MBXFB_FMT_VY0UY1	3
+#define MBXFB_FMT_Y0UY1V	4
+#define MBXFB_FMT_Y0VY1U	5
 struct mbxfb_overlaySetup {
 	__u32 enable;
 	__u32 x, y;
 	__u32 width, height;
-	__u32 alpha;
 	__u32 fmt;
 	__u32 mem_offset;
 	__u32 scaled_width;
 	__u32 scaled_height;
-
+	
 	/* Filled by the driver */
 	__u32 U_offset;
 	__u32 V_offset;
@@ -54,6 +54,45 @@
 	__u16 UV_stride;
 };
 
-#define MBXFB_IOCX_OVERLAY	_IOWR(0xF4, 0x00,struct mbxfb_overlaySetup)
+#define MBXFB_ALPHABLEND_NONE		0
+#define MBXFB_ALPHABLEND_GLOBAL		1
+#define MBXFB_ALPHABLEND_PIXEL		2
+
+#define MBXFB_COLORKEY_DISABLED		0
+#define MBXFB_COLORKEY_PREVIOUS		1
+#define MBXFB_COLORKEY_CURRENT		2
+struct mbxfb_alphaCtl {
+	__u8 overlay_blend_mode;
+	__u8 overlay_colorkey_mode;
+	__u8 overlay_global_alpha;
+	__u32 overlay_colorkey;
+	__u32 overlay_colorkey_mask;
+
+	__u8 graphics_blend_mode;
+	__u8 graphics_colorkey_mode;
+	__u8 graphics_global_alpha;
+	__u32 graphics_colorkey;
+	__u32 graphics_colorkey_mask;
+};
+
+#define MBXFB_PLANE_GRAPHICS	0
+#define MBXFB_PLANE_VIDEO	1
+struct mbxfb_planeorder {
+	__u8 bottom;
+	__u8 top;
+};
+
+struct mbxfb_reg {
+	__u32 addr; 	/* offset from 0x03fe 0000 */
+	__u32 val;		/* value */
+	__u32 mask;		/* which bits to touch (for write) */
+};
+
+#define MBXFB_IOCX_OVERLAY		_IOWR(0xF4, 0x00,struct mbxfb_overlaySetup)
+#define MBXFB_IOCG_ALPHA		_IOR(0xF4, 0x01,struct mbxfb_alphaCtl)
+#define MBXFB_IOCS_ALPHA		_IOW(0xF4, 0x02,struct mbxfb_alphaCtl)
+#define MBXFB_IOCS_PLANEORDER	_IOR(0xF4, 0x03,struct mbxfb_planeorder)
+#define MBXFB_IOCS_REG			_IOW(0xF4, 0x04,struct mbxfb_reg)
+#define MBXFB_IOCX_REG			_IOWR(0xF4, 0x05,struct mbxfb_reg)
 
 #endif /* __MBX_FB_H */

[-- Attachment #3: Type: text/plain, Size: 286 bytes --]

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/

[-- Attachment #4: Type: text/plain, Size: 182 bytes --]

_______________________________________________
Linux-fbdev-devel mailing list
Linux-fbdev-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-fbdev-devel