From: Chris Ruehl <aacraidbug@xit.com.hk>
To: "Linux-scsi vger.kernel.org" <linux-scsi@vger.kernel.org>
Subject: aacraid 2.6.21+ partition table disappear
Date: Wed, 18 Jul 2007 17:47:37 +0800 [thread overview]
Message-ID: <469DE1B9.6030107@xit.com.hk> (raw)
Hi all,
I had been last 2 Day in China trying update a Linux (Debian Sarge)
running a 2.6.14.3 to 2.6.21.6 or 2.6.22.1
The boot stuck in a VFS Kernel Panic no root filesystem found.
1) aacraid compiled into kernel - failed
2) as module + initrd - failed
the initrd show that the sda with 200GB was found - driver sd
but no partition was found.
Sorry I could not get a serial cable to cover the boot log - and it's
impossible
to get one if you can't speak Mandarin.
Do you have any hint what I could do?
Thank you
Chris
Controller is
0000:02:08.0 RAID bus controller: Adaptec AAC-RAID (rev 01)
Subsystem: Adaptec 2120S (Crusader)
kerneloutput """ 2.6.14.3 """
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver (1.1-4 Jan 28 2006 18:35:59)
AAC0: kernel 4.2-0[8205]
AAC0: monitor 4.2-0[8205]
AAC0: bios 4.2-0[8205]
AAC0: serial c49a76
AAC0: Non-DASD support enabled.
scsi0 : aacraid
Vendor: ADAPTEC Model: XITArray1 Rev: V1.0
Type: Direct-Access ANSI SCSI revision: 02
Vendor: SEAGATE Model: ST373207LC Rev: D701
Type: Direct-Access ANSI SCSI revision: 03
Vendor: SEAGATE Model: ST373207LC Rev: D701
Type: Direct-Access ANSI SCSI revision: 03
Vendor: SEAGATE Model: ST373207LC Rev: D701
Type: Direct-Access ANSI SCSI revision: 03
Vendor: SEAGATE Model: ST373207LC Rev: D701
Type: Direct-Access ANSI SCSI revision: 03
Vendor: SEAGATE Model: ST373207LC Rev: D701
Type: Direct-Access ANSI SCSI revision: 03
3ware 9000 Storage Controller device driver for Linux v2.26.02.004.
SCSI device sda: 429920256 512-byte hdwr sectors (220119 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: got wrong page
sda: assuming drive cache: write through
SCSI device sda: 429920256 512-byte hdwr sectors (220119 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: got wrong page
sda: assuming drive cache: write through
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
--
X-IT Management Ltd.
Office A, 14/F, Wing Sing Commercial Bldg.
12 Wing Lok Street, Sheung Wan
Hong Kong
3596 7575 PHONE
3585 5118 FAX
next reply other threads:[~2007-07-18 10:08 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-18 9:47 Chris Ruehl [this message]
2007-07-18 12:10 ` aacraid 2.6.21+ partition table disappear Salyzyn, Mark
2007-07-19 5:34 ` Chris Ruehl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=469DE1B9.6030107@xit.com.hk \
--to=aacraidbug@xit.com.hk \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.