Re: [Xenomai-help] Cross Compile the Xenomai-2.3.2 for AT91 - ld terminated with signal 11

[Jan Kiszka <jan.kiszka@domain.hid>]

[-- Attachment #1: Type: text/plain, Size: 1522 bytes --]

Gilles Chanteperdrix wrote:
> On 7/19/07, Yeoh Chun Yeow <yeohchunyeow@domain.hid> wrote:
>> On 7/19/07, Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org> wrote:
>>> On 7/19/07, Yeoh Chun Yeow <yeohchunyeow@domain.hid> wrote:
>>>> Dear all,
>>>>
>>>> I have tried to cross compile the xenomai-2.3.2 for AT91RM9200 but run
>> in to
>>>> the following problems:
>>>>
>>>> (...)
>>>> collect2: ld terminated with signal 11 [Segmentation fault]
>>>> (...)
>>> No, Xenomai compilation flags trigger a bug of the toolchain you use.
>>> Could you try xenomai-2.3.1 to see if the bug does not come from some
>>> recent changes ?
>>> If you have the same problem with xenomai-2.3.1, I am afraid you will
>>> have to change your toolchain.
>>>
>> Try out the xenomai-2.3.1, the error remains the same. Any recommendation of
>> the toolchain that works?
> 
> There are two things you can try:
> - compile a toolchain yourself with crosstools
> http://kegel.com/crosstool/ but pay attention, not all combinations
> work, especially for ARM, so have a look at the following matrix
> http://kegel.com/crosstool/crosstool-0.43/buildlogs/ and pick a
> combination that is reported to work
> - get a toolchain from codesourcery at
> http://www.codesourcery.com/gnu_toolchains/arm/download.html
> 

It should be this binutils bug:

http://www.ecos.sourceware.org/ml/binutils/2006-12/msg00309.html

So take care to pick a toolchain with the fitting version (or apply the
patch manually).

Jan


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 250 bytes --]