* [U-Boot-Users] [ARM] TI DaVinci (TMS320DM644x) support [5/5]
@ 2007-08-06 0:33 ksi at koi8.net
2007-08-06 16:59 ` Dirk Behme
0 siblings, 1 reply; 3+ messages in thread
From: ksi at koi8.net @ 2007-08-06 0:33 UTC (permalink / raw)
To: u-boot
Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
=== Cut ===
diff -purN u-boot.git.orig/include/common.h u-boot.git/include/common.h
--- u-boot.git.orig/include/common.h 2007-08-04 22:07:13.000000000 -0700
+++ u-boot.git/include/common.h 2007-08-05 16:19:52.000000000 -0700
@@ -233,6 +233,9 @@ int saveenv (void);
void inline setenv (char *, char *);
#else
void setenv (char *, char *);
+#ifdef CONFIG_HAS_UID
+void forceenv (char *, char *);
+#endif
#endif /* CONFIG_PPC */
#ifdef CONFIG_ARM
# include <asm/mach-types.h>
diff -purN u-boot.git.orig/include/configs/davinci.h u-boot.git/include/configs/davinci.h
--- u-boot.git.orig/include/configs/davinci.h 1969-12-31 16:00:00.000000000 -0800
+++ u-boot.git/include/configs/davinci.h 2007-08-05 16:19:52.000000000 -0700
@@ -0,0 +1,292 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+#include <asm/sizes.h>
+
+/*
+ * Define this to make U-Boot skip low level initialization when loaded
+ * by initial bootloader. Not required by NAND U-Boot version but IS
+ * required for a NOR version used to burn the real NOR U-Boot into
+ * NOR Flash. NAND and NOR support for DaVinci chips is mutually exclusive
+ * so it is NOT possible to build a U-Boot with both NAND and NOR routines.
+ * NOR U-Boot is loaded directly from Flash so it must perform all the
+ * low level initialization itself. NAND version is loaded by an initial
+ * bootloader (UBL in TI-ese) that performs such an initialization so it's
+ * skipped in NAND version. The third DaVinci boot mode loads a bootloader
+ * via UART0 and that bootloader in turn loads and runs U-Boot (or whatever)
+ * performing low level init prior to loading. All that means we can NOT use
+ * NAND version to put U-Boot into NOR because it doesn't have NOR support and
+ * we can NOT use NOR version because it performs low level initialization
+ * effectively destroying itself in DDR memory. That's why a separate NOR
+ * version with this define is needed. It is loaded via UART, then one uses
+ * it to somehow download a proper NOR version built WITHOUT this define to
+ * RAM (tftp?) and burn it to NOR Flash. I would be probably able to squeeze
+ * NOR support into the initial bootloader so it won't be needed but DaVinci
+ * static RAM might be too small for this (I have something like 2Kbytes left
+ * as of now, without NOR support) so this might've not happened...
+ *
+#define CONFIG_NOR_UART_BOOT
+ */
+
+/*===========================================================================*/
+/* Board, choose one */
+/*===========================================================================*/
+#define DV_EVM
+/*
+#define DV_EVM
+#define SONATA_BOARD
+#define SCHMOOGIE
+*/
+#ifdef SONATA_BOARD
+#if defined(DV_EVM) || defined(SCHMOOGIE)
+#error "Multiple boards defined in davinci.h !!!"
+#endif
+#define CFG_NAND_SMALLPAGE
+#define CFG_USE_NOR
+#elif defined(DV_EVM)
+#if defined(SONATA_BOARD) || defined(SCHMOOGIE)
+#error "Multiple boards defined in davinci.h !!!"
+#endif
+#define CFG_NAND_SMALLPAGE
+#define CFG_USE_NOR
+#elif defined(SCHMOOGIE)
+#if defined(SONATA_BOARD) || defined(DV_EVM)
+#error "Multiple boards defined in davinci.h !!!"
+#endif
+#define CFG_NAND_LARGEPAGE
+#define CFG_USE_NAND
+#else
+#error "No board defined in davinci.h !!!"
+#endif
+/*===================*/
+/* SoC Configuration */
+/*===================*/
+#define CONFIG_ARM926EJS /* arm926ejs CPU core */
+#define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */
+#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */
+#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */
+#define CFG_HZ 1000
+/*====================================================*/
+/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
+/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */
+/*====================================================*/
+#if defined(SONATA_BOARD) || defined(DV_EVM)
+#define CFG_I2C_EEPROM_ADDR_LEN 2
+#define CFG_I2C_EEPROM_ADDR 0x50
+#define CFG_EEPROM_PAGE_WRITE_BITS 6
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
+#endif
+/*=============*/
+/* Memory Info */
+/*=============*/
+#define CFG_MALLOC_LEN (0x10000 + 256*1024) /* malloc() len */
+#define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */
+#define CFG_MEMTEST_START 0x80000000 /* memtest start address */
+#define CFG_MEMTEST_END 0x81000000 /* 16MB RAM test */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define CONFIG_STACKSIZE (256*1024) /* regular stack */
+#define PHYS_SDRAM_1 0x80000000 /* DDR Start */
+#if defined(SONATA_BOARD) || defined(SCHMOOGIE)
+#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */
+#define DDR_4BANKS /* 4-bank DDR2 (128MB) */
+#elif defined(DV_EVM)
+#define PHYS_SDRAM_1_SIZE 0x10000000 /* DDR size 256MB */
+#define DDR_8BANKS /* 8-bank DDR2 (256MB) */
+#else
+#error "No DDR memory configuration in davinci.h !!!"
+#endif
+#ifdef DDR_4BANKS
+#define KMEM "mem=56M "
+#elif defined(DDR_8BANKS)
+#define KMEM "mem=120M "
+#else
+#error "Invalid DDR configuration in davinci.h !!!"
+#endif
+
+/*====================*/
+/* Serial Driver info */
+/*====================*/
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */
+#define CFG_NS16550_COM1 0x01c20000 /* Base address of UART0 */
+#define CFG_NS16550_CLK 27000000 /* Input clock to NS16550 */
+#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
+#define CONFIG_BAUDRATE 115200 /* Default baud rate */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+/*===================*/
+/* I2C Configuration */
+/*===================*/
+#define CONFIG_HARD_I2C
+#define CONFIG_DRIVER_DAVINCI_I2C
+#define CFG_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */
+#define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
+/*==================================*/
+/* Network & Ethernet Configuration */
+/*==================================*/
+#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_MII
+#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_DNS | CONFIG_BOOTP_DNS2 | CONFIG_BOOTP_SEND_HOSTNAME)
+#define CONFIG_NET_RETRY_COUNT 10
+#ifdef SCHMOOGIE
+#define CONFIG_OVERWRITE_ETHADDR_ONCE
+#endif
+/*=====================*/
+/* Flash & Environment */
+/*=====================*/
+#ifdef CFG_USE_NAND
+#undef CFG_ENV_IS_IN_FLASH
+#define CFG_NO_FLASH
+#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
+#ifdef CFG_NAND_SMALLPAGE
+#define CFG_ENV_SECT_SIZE 512 /* Env sector Size */
+#define CFG_ENV_SIZE SZ_16K
+#else
+#define CFG_ENV_SECT_SIZE 2048 /* Env sector Size */
+#define CFG_ENV_SIZE SZ_128K
+#endif
+#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
+#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */
+#define CFG_NAND_BASE 0x02000000
+#define CFG_NAND_HW_ECC
+#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
+#define NAND_MAX_CHIPS 1
+#define CFG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
+#define DEF_BOOTM ""
+#elif defined(CFG_USE_NOR)
+#ifdef CONFIG_NOR_UART_BOOT
+#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
+#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */
+#else
+#undef CONFIG_SKIP_LOWLEVEL_INIT
+#undef CONFIG_SKIP_RELOCATE_UBOOT
+#endif
+#define CFG_ENV_IS_IN_FLASH
+#undef CFG_NO_FLASH
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_MAX_FLASH_BANKS 1 /* max number of flash banks */
+#ifdef SONATA_BOARD
+#define CFG_FLASH_SECT_SZ 0x20000 /* 128KB sect size AMD Flash */
+#define CFG_ENV_OFFSET (CFG_FLASH_SECT_SZ*2)
+#elif defined(DV_EVM)
+#define CFG_FLASH_SECT_SZ 0x10000 /* 64KB sect size AMD Flash */
+#define CFG_ENV_OFFSET (CFG_FLASH_SECT_SZ*3)
+#else
+#error "Unknown board in NOR Flash config (davinci.h) !!!"
+#endif
+#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */
+#define CFG_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */
+#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */
+#define CFG_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ)
+#define CFG_ENV_SECT_SIZE CFG_FLASH_SECT_SZ /* Env sector Size */
+#if (CFG_FLASH_SECT_SZ == 0x20000)
+#define DEF_BOOTM "; bootm 0x2060000"
+#elif (CFG_FLASH_SECT_SZ == 0x10000)
+#define DEF_BOOTM "; bootm 0x2050000"
+#else
+#error "Invalid NOR Flash Sector Size in davinci.h !!!"
+#endif
+#else
+#error "Bogus Flash configuration !!!"
+#endif
+/*=====================*/
+/* Board related stuff */
+/*=====================*/
+#ifdef SCHMOOGIE
+#define CONFIG_RTC_DS1337 /* RTC chip on SCHMOOGIE */
+#define CFG_I2C_RTC_ADDR 0x68 /* RTC chip I2C address */
+#define CONFIG_HAS_UID
+#define CONFIG_UID_DS28CM00 /* Unique ID on SCHMOOGIE */
+#define CFG_UID_ADDR 0x50 /* UID chip I2C address */
+#endif
+/*==============================*/
+/* U-Boot general configuration */
+/*==============================*/
+#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
+#define CONFIG_MISC_INIT_R
+#undef CONFIG_BOOTDELAY
+#define CONFIG_BOOTFILE "uImage" /* Boot file name */
+#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buffer sz */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_LOAD_ADDR 0x80700000 /* default Linux kernel load address */
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_CMDLINE_EDITING
+#define CFG_LONGHELP
+#define CONFIG_CRC32_VERIFY
+#define CONFIG_MX_CYCLIC
+/*===================*/
+/* Linux Information */
+/*===================*/
+#define LINUX_BOOT_PARAM_ADDR 0x80000100
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_BOOTARGS KMEM "console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp"
+#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot" DEF_BOOTM
+/*=================*/
+/* U-Boot commands */
+/*=================*/
+#define COMMON_CMD_SET (CONFIG_CMD_DFL |\
+ CFG_CMD_PING |\
+ CFG_CMD_DHCP |\
+ CFG_CMD_I2C |\
+ CFG_CMD_DIAG |\
+ CFG_CMD_ASKENV |\
+ CFG_CMD_SAVES |\
+ CFG_CMD_MII)
+#ifdef CFG_USE_NAND
+#define CUSTOM_CMD_SET ((COMMON_CMD_SET |\
+ CFG_CMD_NAND) &\
+ ~(CFG_CMD_FLASH |\
+ CFG_CMD_IMLS))
+#elif defined(CFG_USE_NOR)
+#define CUSTOM_CMD_SET ((COMMON_CMD_SET |\
+ CFG_CMD_FLASH |\
+ CFG_CMD_JFFS2) &\
+ ~(CFG_CMD_NAND))
+#else
+#error "Either CFG_USE_NAND or CFG_USE_NOR _MUST_ be defined !!!"
+#endif
+#ifdef SCHMOOGIE
+#define CONFIG_COMMANDS ((CUSTOM_CMD_SET) |\
+ (CFG_CMD_DATE))
+#elif defined(DV_EVM) || defined(SONATA_BOARD)
+#define CONFIG_COMMANDS ((CUSTOM_CMD_SET) |\
+ (CFG_CMD_EEPROM))
+#else
+#define CONFIG_COMMANDS (CUSTOM_CMD_SET)
+#endif
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+/*=======================*/
+/* KGDB support (if any) */
+/*=======================*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
+#endif
+#endif /* __CONFIG_H */
diff -purN u-boot.git.orig/include/dp83848.h u-boot.git/include/dp83848.h
--- u-boot.git.orig/include/dp83848.h 1969-12-31 16:00:00.000000000 -0800
+++ u-boot.git/include/dp83848.h 2007-08-05 16:19:52.000000000 -0700
@@ -0,0 +1,88 @@
+/*
+ * DP83848 ethernet Physical layer
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+
+/* National Semiconductor PHYSICAL LAYER TRANSCEIVER DP83848 */
+
+#define DP83848_CTL_REG 0x0 /* Basic Mode Control Reg */
+#define DP83848_STAT_REG 0x1 /* Basic Mode Status Reg */
+#define DP83848_PHYID1_REG 0x2 /* PHY Idendifier Reg 1 */
+#define DP83848_PHYID2_REG 0x3 /* PHY Idendifier Reg 2 */
+#define DP83848_ANA_REG 0x4 /* Auto_Neg Advt Reg */
+#define DP83848_ANLPA_REG 0x5 /* Auto_neg Link Partner Ability Reg */
+#define DP83848_ANE_REG 0x6 /* Auto-neg Expansion Reg */
+#define DP83848_PHY_STAT_REG 0x10 /* PHY Status Register */
+#define DP83848_PHY_INTR_CTRL_REG 0x11 /* PHY Interrupt Control Register */
+#define DP83848_PHY_CTRL_REG 0x19 /* PHY Status Register */
+
+/*--Bit definitions: DP83848_CTL_REG */
+#define DP83848_RESET (1 << 15) /* 1= S/W Reset */
+#define DP83848_LOOPBACK (1 << 14) /* 1=loopback Enabled */
+#define DP83848_SPEED_SELECT (1 << 13)
+#define DP83848_AUTONEG (1 << 12)
+#define DP83848_POWER_DOWN (1 << 11)
+#define DP83848_ISOLATE (1 << 10)
+#define DP83848_RESTART_AUTONEG (1 << 9)
+#define DP83848_DUPLEX_MODE (1 << 8)
+#define DP83848_COLLISION_TEST (1 << 7)
+
+/*--Bit definitions: DP83848_STAT_REG */
+#define DP83848_100BASE_T4 (1 << 15)
+#define DP83848_100BASE_TX_FD (1 << 14)
+#define DP83848_100BASE_TX_HD (1 << 13)
+#define DP83848_10BASE_T_FD (1 << 12)
+#define DP83848_10BASE_T_HD (1 << 11)
+#define DP83848_MF_PREAMB_SUPPR (1 << 6)
+#define DP83848_AUTONEG_COMP (1 << 5)
+#define DP83848_RMT_FAULT (1 << 4)
+#define DP83848_AUTONEG_ABILITY (1 << 3)
+#define DP83848_LINK_STATUS (1 << 2)
+#define DP83848_JABBER_DETECT (1 << 1)
+#define DP83848_EXTEND_CAPAB (1 << 0)
+
+/*--definitions: DP83848_PHYID1 */
+#define DP83848_PHYID1_OUI 0x2000
+#define DP83848_PHYID2_OUI 0x5c90
+
+/*--Bit definitions: DP83848_ANAR, DP83848_ANLPAR */
+#define DP83848_NP (1 << 15)
+#define DP83848_ACK (1 << 14)
+#define DP83848_RF (1 << 13)
+#define DP83848_PAUSE (1 << 10)
+#define DP83848_T4 (1 << 9)
+#define DP83848_TX_FDX (1 << 8)
+#define DP83848_TX_HDX (1 << 7)
+#define DP83848_10_FDX (1 << 6)
+#define DP83848_10_HDX (1 << 5)
+#define DP83848_AN_IEEE_802_3 0x0001
+
+/*--Bit definitions: DP83848_ANER */
+#define DP83848_PDF (1 << 4)
+#define DP83848_LP_NP_ABLE (1 << 3)
+#define DP83848_NP_ABLE (1 << 2)
+#define DP83848_PAGE_RX (1 << 1)
+#define DP83848_LP_AN_ABLE (1 << 0)
+
+/*--Bit definitions: DP83848_PHY_STAT */
+#define DP83848_RX_ERR_LATCH (1 << 13)
+#define DP83848_POLARITY_STAT (1 << 12)
+#define DP83848_FALSE_CAR_SENSE (1 << 11)
+#define DP83848_SIG_DETECT (1 << 10)
+#define DP83848_DESCRAM_LOCK (1 << 9)
+#define DP83848_PAGE_RCV (1 << 8)
+#define DP83848_PHY_RMT_FAULT (1 << 6)
+#define DP83848_JABBER (1 << 5)
+#define DP83848_AUTONEG_COMPLETE (1 << 4)
+#define DP83848_LOOPBACK_STAT (1 << 3)
+#define DP83848_DUPLEX (1 << 2)
+#define DP83848_SPEED (1 << 1)
+#define DP83848_LINK (1 << 0)
diff -purN u-boot.git.orig/include/_exports.h u-boot.git/include/_exports.h
--- u-boot.git.orig/include/_exports.h 2007-02-12 10:41:27.000000000 -0800
+++ u-boot.git/include/_exports.h 2007-08-05 16:19:52.000000000 -0700
@@ -14,6 +14,9 @@ EXPORT_FUNC(vprintf)
EXPORT_FUNC(do_reset)
EXPORT_FUNC(getenv)
EXPORT_FUNC(setenv)
+#ifdef CONFIG_HAS_UID
+EXPORT_FUNC(forceenv)
+#endif
EXPORT_FUNC(simple_strtoul)
#if (CONFIG_COMMANDS & CFG_CMD_I2C)
EXPORT_FUNC(i2c_write)
diff -purN u-boot.git.orig/include/exports.h u-boot.git/include/exports.h
--- u-boot.git.orig/include/exports.h 2007-02-12 10:41:27.000000000 -0800
+++ u-boot.git/include/exports.h 2007-08-05 16:19:52.000000000 -0700
@@ -23,6 +23,9 @@ void do_reset (void);
unsigned long simple_strtoul(const char *cp,char **endp,unsigned int base);
char *getenv (char *name);
void setenv (char *varname, char *varvalue);
+#ifdef CONFIG_HAS_UID
+void forceenv (char *varname, char *varvalue);
+#endif
#if (CONFIG_COMMANDS & CFG_CMD_I2C)
int i2c_write (uchar, uint, int , uchar* , int);
int i2c_read (uchar, uint, int , uchar* , int);
diff -purN u-boot.git.orig/include/linux/mtd/mtd.h u-boot.git/include/linux/mtd/mtd.h
--- u-boot.git.orig/include/linux/mtd/mtd.h 2007-02-12 10:41:27.000000000 -0800
+++ u-boot.git/include/linux/mtd/mtd.h 2007-08-05 16:19:52.000000000 -0700
@@ -11,6 +11,11 @@
#include <linux/types.h>
#include <linux/mtd/mtd-abi.h>
+#if 0
+#define CONFIG_MTD_DEBUG 1
+#define CONFIG_MTD_DEBUG_VERBOSE 3
+#endif
+
#define MAX_MTD_DEVICES 16
#define MTD_ERASE_PENDING 0x01
@@ -201,11 +206,19 @@ static inline void mtd_erase_callback(st
#define MTD_DEBUG_LEVEL3 (3) /* Noisy */
#ifdef CONFIG_MTD_DEBUG
+#if 0
#define DEBUG(n, args...) \
do { \
if (n <= CONFIG_MTD_DEBUG_VERBOSE) \
printk(KERN_INFO args); \
} while(0)
+#else
+#define DEBUG(n, args...) \
+ do { \
+ if (n <= CONFIG_MTD_DEBUG_VERBOSE) \
+ printf(args); \
+ } while(0)
+#endif
#else /* CONFIG_MTD_DEBUG */
#define DEBUG(n, args...) do { } while(0)
=== Cut ===
---
******************************************************************
* KSI@home KOI8 Net < > The impossible we do immediately. *
* Las Vegas NV, USA < > Miracles require 24-hour notice. *
******************************************************************
^ permalink raw reply [flat|nested] 3+ messages in thread* [U-Boot-Users] [ARM] TI DaVinci (TMS320DM644x) support [5/5]
2007-08-06 0:33 [U-Boot-Users] [ARM] TI DaVinci (TMS320DM644x) support [5/5] ksi at koi8.net
@ 2007-08-06 16:59 ` Dirk Behme
2007-08-06 17:52 ` Jon Loeliger
0 siblings, 1 reply; 3+ messages in thread
From: Dirk Behme @ 2007-08-06 16:59 UTC (permalink / raw)
To: u-boot
ksi at koi8.net wrote:
> Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
...
> diff -purN u-boot.git.orig/include/configs/davinci.h u-boot.git/include/configs/davinci.h
> --- u-boot.git.orig/include/configs/davinci.h 1969-12-31 16:00:00.000000000 -0800
> +++ u-boot.git/include/configs/davinci.h 2007-08-05 16:19:52.000000000 -0700
...
> +/*===========================================================================*/
> +/* Board, choose one */
> +/*===========================================================================*/
> +#define DV_EVM
> +/*
> +#define DV_EVM
> +#define SONATA_BOARD
> +#define SCHMOOGIE
> +*/
...
> +#ifdef SONATA_BOARD
> +#define CFG_FLASH_SECT_SZ 0x20000 /* 128KB sect size AMD Flash */
> +#define CFG_ENV_OFFSET (CFG_FLASH_SECT_SZ*2)
> +#elif defined(DV_EVM)
> +#define CFG_FLASH_SECT_SZ 0x10000 /* 64KB sect size AMD Flash */
> +#define CFG_ENV_OFFSET (CFG_FLASH_SECT_SZ*3)
> +#else
> +#error "Unknown board in NOR Flash config (davinci.h) !!!"
> +#endif
- Can you please check if this really compiles for all three boards,
especially for SCHMOOGIE?
- I vote for at least having three config files, one for each board
(as done by my patch ;) ).
> +/*=================*/
> +/* U-Boot commands */
> +/*=================*/
> +#define COMMON_CMD_SET (CONFIG_CMD_DFL |\
> + CFG_CMD_PING |\
> + CFG_CMD_DHCP |\
> + CFG_CMD_I2C |\
> + CFG_CMD_DIAG |\
> + CFG_CMD_ASKENV |\
> + CFG_CMD_SAVES |\
> + CFG_CMD_MII)
> +#ifdef CFG_USE_NAND
> +#define CUSTOM_CMD_SET ((COMMON_CMD_SET |\
> + CFG_CMD_NAND) &\
> + ~(CFG_CMD_FLASH |\
> + CFG_CMD_IMLS))
> +#elif defined(CFG_USE_NOR)
> +#define CUSTOM_CMD_SET ((COMMON_CMD_SET |\
> + CFG_CMD_FLASH |\
> + CFG_CMD_JFFS2) &\
> + ~(CFG_CMD_NAND))
> +#else
> +#error "Either CFG_USE_NAND or CFG_USE_NOR _MUST_ be defined !!!"
> +#endif
> +#ifdef SCHMOOGIE
> +#define CONFIG_COMMANDS ((CUSTOM_CMD_SET) |\
> + (CFG_CMD_DATE))
> +#elif defined(DV_EVM) || defined(SONATA_BOARD)
> +#define CONFIG_COMMANDS ((CUSTOM_CMD_SET) |\
> + (CFG_CMD_EEPROM))
> +#else
> +#define CONFIG_COMMANDS (CUSTOM_CMD_SET)
> +#endif
> +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
> +#include <cmd_confdefs.h>
- I had to learn that recent git update from today needs update to
this stuff (there is no cmd_confdefs.h any more). So, with git from
yesterday, Sunday, this still works, but recent git update needs an
update of this as well. See e.g.
http://www.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=commitdiff;h=a5cb23092a7d31490a33d4ec871468b63babfa3c
Best regards
Dirk
^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot-Users] [ARM] TI DaVinci (TMS320DM644x) support [5/5]
2007-08-06 16:59 ` Dirk Behme
@ 2007-08-06 17:52 ` Jon Loeliger
0 siblings, 0 replies; 3+ messages in thread
From: Jon Loeliger @ 2007-08-06 17:52 UTC (permalink / raw)
To: u-boot
On Mon, 2007-08-06 at 11:59, Dirk Behme wrote:
> > +/*=================*/
> > +/* U-Boot commands */
> > +/*=================*/
> > +#define COMMON_CMD_SET (CONFIG_CMD_DFL |\
> > + CFG_CMD_PING |\
> > + CFG_CMD_DHCP |\
> > + CFG_CMD_I2C |\
> > + CFG_CMD_DIAG |\
> > + CFG_CMD_ASKENV |\
> > + CFG_CMD_SAVES |\
> > + CFG_CMD_MII)
> > +#ifdef CFG_USE_NAND
> > +#define CUSTOM_CMD_SET ((COMMON_CMD_SET |\
> > + CFG_CMD_NAND) &\
> > + ~(CFG_CMD_FLASH |\
> > + CFG_CMD_IMLS))
> > +#elif defined(CFG_USE_NOR)
> > +#define CUSTOM_CMD_SET ((COMMON_CMD_SET |\
> > + CFG_CMD_FLASH |\
> > + CFG_CMD_JFFS2) &\
> > + ~(CFG_CMD_NAND))
> > +#else
> > +#error "Either CFG_USE_NAND or CFG_USE_NOR _MUST_ be defined !!!"
> > +#endif
> > +#ifdef SCHMOOGIE
> > +#define CONFIG_COMMANDS ((CUSTOM_CMD_SET) |\
> > + (CFG_CMD_DATE))
> > +#elif defined(DV_EVM) || defined(SONATA_BOARD)
> > +#define CONFIG_COMMANDS ((CUSTOM_CMD_SET) |\
> > + (CFG_CMD_EEPROM))
> > +#else
> > +#define CONFIG_COMMANDS (CUSTOM_CMD_SET)
> > +#endif
> > +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
> > +#include <cmd_confdefs.h>
>
> - I had to learn that recent git update from today needs update to
> this stuff (there is no cmd_confdefs.h any more). So, with git from
> yesterday, Sunday, this still works, but recent git update needs an
> update of this as well. See e.g.
Did you miss 106 patches to the list? :-)
Yeah, sorry, it's the dawn of a new world order here
in U-Boot land!
It will need to be somewhat like this:
/*
* BOOTP options
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_PING
#define CONFIG_CMD_I2C
#if defined(CONFIG_USE_NAND)
#define CONFIG_CMD_NAND /* or whatever.... */
#define CONFIG_CMD_FLASH
#define CONFIG_CMD_EXT2
#endif
HTH,
jdl
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2007-08-06 17:52 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-08-06 0:33 [U-Boot-Users] [ARM] TI DaVinci (TMS320DM644x) support [5/5] ksi at koi8.net
2007-08-06 16:59 ` Dirk Behme
2007-08-06 17:52 ` Jon Loeliger
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.