* Re: [2/3] 2.6.23-rc2: known regressions v2
[not found] <46B9F664.9060600@googlemail.com>
@ 2007-08-08 17:11 ` Michal Piotrowski
2007-08-08 17:11 ` Michal Piotrowski
` (5 subsequent siblings)
6 siblings, 0 replies; 35+ messages in thread
From: Michal Piotrowski @ 2007-08-08 17:11 UTC (permalink / raw)
To: Linus Torvalds
Cc: Andrew Morton, LKML, Len Brown, dth, linux-fsdevel, nfs,
Trond Myklebust, Andrew Clayton, linux-mtd, David Woodhouse,
Ingo Molnar, Netdev, Stephen Hemminger, Thomas Meyer,
Florian Lohoff, Uwe Bugla
Hi all,
Here is a list of some known regressions in 2.6.23-rc2.
Feel free to add new regressions/remove fixed etc.
http://kernelnewbies.org/known_regressions
List of Aces
Name Regressions fixed since 21-Jun-2007
Adrian Bunk 6
Andi Kleen 4
Andrew Morton 4
Linus Torvalds 4
Al Viro 3
Cornelia Huck 3
Jens Axboe 3
Tejun Heo 3
David Woodhouse 2
Hugh Dickins 2
Peter Zijlstra 2
Trent Piepho 2
CPUFREQ
Subject : ide problems: 2.6.22-git17 working, 2.6.23-rc1* is not
References : http://lkml.org/lkml/2007/7/27/298
http://lkml.org/lkml/2007/7/29/371
Last known good : ?
Submitter : dth <dth@dth.net>
Caused-By : Len Brown <lenb@kernel.org>
commit f79e3185dd0f8650022518d7624c876d8929061b
Handled-By : Len Brown <lenb@kernel.org>
Status : problem is being debugged
FS
Subject : [NFSD OOPS] 2.6.23-rc1-git10
References : http://lkml.org/lkml/2007/8/2/462
Last known good : ?
Submitter : Andrew Clayton <andrew@digital-domain.net>
Caused-By : ?
Handled-By : ?
Status : unknown
MTD
Subject : error: implicit declaration of function 'cfi_interleave'
References : http://lkml.org/lkml/2007/8/6/272
Last known good : ?
Submitter : Ingo Molnar <mingo@elte.hu>
Caused-By : ?
Handled-By : ?
Status : unknown
Networking
Subject : IP v4 routing is broken
References : http://www.stardust.webpages.pl/files/tbf/bugs/bug_report01.txt
Last known good : 2.6.22-git2
Submitter : Uwe Bugla <uwe.bugla@gmx.de>
Caused-By : ?
Handled-By : ?
Status : unknown
Subject : New wake ups from sky2
References : http://lkml.org/lkml/2007/7/20/386
Last known good : ?
Submitter : Thomas Meyer <thomas@m3y3r.de>
Caused-By : Stephen Hemminger <shemminger@osdl.org>
commit eb35cf60e462491249166182e3e755d3d5d91a28
Handled-By : Stephen Hemminger <shemminger@osdl.org>
Status : unknown
Regards,
Michal
--
LOG
http://www.stardust.webpages.pl/log/
^ permalink raw reply [flat|nested] 35+ messages in thread* Re: [2/3] 2.6.23-rc2: known regressions v2
[not found] <46B9F664.9060600@googlemail.com>
2007-08-08 17:11 ` [2/3] 2.6.23-rc2: known regressions v2 Michal Piotrowski
@ 2007-08-08 17:11 ` Michal Piotrowski
2007-08-08 17:11 ` Michal Piotrowski
` (4 subsequent siblings)
6 siblings, 0 replies; 35+ messages in thread
From: Michal Piotrowski @ 2007-08-08 17:11 UTC (permalink / raw)
To: Linus Torvalds
Cc: dth, Andrew Clayton, Netdev, Florian Lohoff, Trond Myklebust,
LKML, Uwe Bugla, nfs, Thomas Meyer, linux-fsdevel, linux-mtd,
Andrew Morton, David Woodhouse, Ingo Molnar, Stephen Hemminger,
Len Brown
Hi all,
Here is a list of some known regressions in 2.6.23-rc2.
Feel free to add new regressions/remove fixed etc.
http://kernelnewbies.org/known_regressions
List of Aces
Name Regressions fixed since 21-Jun-2007
Adrian Bunk 6
Andi Kleen 4
Andrew Morton 4
Linus Torvalds 4
Al Viro 3
Cornelia Huck 3
Jens Axboe 3
Tejun Heo 3
David Woodhouse 2
Hugh Dickins 2
Peter Zijlstra 2
Trent Piepho 2
CPUFREQ
Subject : ide problems: 2.6.22-git17 working, 2.6.23-rc1* is not
References : http://lkml.org/lkml/2007/7/27/298
http://lkml.org/lkml/2007/7/29/371
Last known good : ?
Submitter : dth <dth@dth.net>
Caused-By : Len Brown <lenb@kernel.org>
commit f79e3185dd0f8650022518d7624c876d8929061b
Handled-By : Len Brown <lenb@kernel.org>
Status : problem is being debugged
FS
Subject : [NFSD OOPS] 2.6.23-rc1-git10
References : http://lkml.org/lkml/2007/8/2/462
Last known good : ?
Submitter : Andrew Clayton <andrew@digital-domain.net>
Caused-By : ?
Handled-By : ?
Status : unknown
MTD
Subject : error: implicit declaration of function 'cfi_interleave'
References : http://lkml.org/lkml/2007/8/6/272
Last known good : ?
Submitter : Ingo Molnar <mingo@elte.hu>
Caused-By : ?
Handled-By : ?
Status : unknown
Networking
Subject : IP v4 routing is broken
References : http://www.stardust.webpages.pl/files/tbf/bugs/bug_report01.txt
Last known good : 2.6.22-git2
Submitter : Uwe Bugla <uwe.bugla@gmx.de>
Caused-By : ?
Handled-By : ?
Status : unknown
Subject : New wake ups from sky2
References : http://lkml.org/lkml/2007/7/20/386
Last known good : ?
Submitter : Thomas Meyer <thomas@m3y3r.de>
Caused-By : Stephen Hemminger <shemminger@osdl.org>
commit eb35cf60e462491249166182e3e755d3d5d91a28
Handled-By : Stephen Hemminger <shemminger@osdl.org>
Status : unknown
Regards,
Michal
--
LOG
http://www.stardust.webpages.pl/log/
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 35+ messages in thread* Re: [2/3] 2.6.23-rc2: known regressions v2
[not found] <46B9F664.9060600@googlemail.com>
@ 2007-08-08 17:11 ` Michal Piotrowski
2007-08-08 17:11 ` Michal Piotrowski
` (5 subsequent siblings)
6 siblings, 0 replies; 35+ messages in thread
From: Michal Piotrowski @ 2007-08-08 17:11 UTC (permalink / raw)
To: Linus Torvalds
Cc: dth, Andrew Clayton, Netdev, Florian Lohoff, Trond Myklebust,
LKML, Uwe Bugla, nfs, Thomas Meyer, linux-fsdevel, linux-mtd,
Andrew Morton, David Woodhouse, Ingo Molnar, Stephen Hemminger,
Len Brown
Hi all,
Here is a list of some known regressions in 2.6.23-rc2.
Feel free to add new regressions/remove fixed etc.
http://kernelnewbies.org/known_regressions
List of Aces
Name Regressions fixed since 21-Jun-2007
Adrian Bunk 6
Andi Kleen 4
Andrew Morton 4
Linus Torvalds 4
Al Viro 3
Cornelia Huck 3
Jens Axboe 3
Tejun Heo 3
David Woodhouse 2
Hugh Dickins 2
Peter Zijlstra 2
Trent Piepho 2
CPUFREQ
Subject : ide problems: 2.6.22-git17 working, 2.6.23-rc1* is not
References : http://lkml.org/lkml/2007/7/27/298
http://lkml.org/lkml/2007/7/29/371
Last known good : ?
Submitter : dth <dth@dth.net>
Caused-By : Len Brown <lenb@kernel.org>
commit f79e3185dd0f8650022518d7624c876d8929061b
Handled-By : Len Brown <lenb@kernel.org>
Status : problem is being debugged
FS
Subject : [NFSD OOPS] 2.6.23-rc1-git10
References : http://lkml.org/lkml/2007/8/2/462
Last known good : ?
Submitter : Andrew Clayton <andrew@digital-domain.net>
Caused-By : ?
Handled-By : ?
Status : unknown
MTD
Subject : error: implicit declaration of function 'cfi_interleave'
References : http://lkml.org/lkml/2007/8/6/272
Last known good : ?
Submitter : Ingo Molnar <mingo@elte.hu>
Caused-By : ?
Handled-By : ?
Status : unknown
Networking
Subject : IP v4 routing is broken
References : http://www.stardust.webpages.pl/files/tbf/bugs/bug_report01.txt
Last known good : 2.6.22-git2
Submitter : Uwe Bugla <uwe.bugla@gmx.de>
Caused-By : ?
Handled-By : ?
Status : unknown
Subject : New wake ups from sky2
References : http://lkml.org/lkml/2007/7/20/386
Last known good : ?
Submitter : Thomas Meyer <thomas@m3y3r.de>
Caused-By : Stephen Hemminger <shemminger@osdl.org>
commit eb35cf60e462491249166182e3e755d3d5d91a28
Handled-By : Stephen Hemminger <shemminger@osdl.org>
Status : unknown
Regards,
Michal
--
LOG
http://www.stardust.webpages.pl/log/
^ permalink raw reply [flat|nested] 35+ messages in thread* Re: [2/3] 2.6.23-rc2: known regressions v2
@ 2007-08-08 17:11 ` Michal Piotrowski
0 siblings, 0 replies; 35+ messages in thread
From: Michal Piotrowski @ 2007-08-08 17:11 UTC (permalink / raw)
To: Linus Torvalds
Cc: Andrew Morton, LKML, Len Brown, dth, linux-fsdevel, nfs,
Trond Myklebust, Andrew Clayton, linux-mtd, David Woodhouse,
Ingo Molnar, Netdev, Stephen Hemminger, Thomas Meyer,
Florian Lohoff, Uwe Bugla
Hi all,
Here is a list of some known regressions in 2.6.23-rc2.
Feel free to add new regressions/remove fixed etc.
http://kernelnewbies.org/known_regressions
List of Aces
Name Regressions fixed since 21-Jun-2007
Adrian Bunk 6
Andi Kleen 4
Andrew Morton 4
Linus Torvalds 4
Al Viro 3
Cornelia Huck 3
Jens Axboe 3
Tejun Heo 3
David Woodhouse 2
Hugh Dickins 2
Peter Zijlstra 2
Trent Piepho 2
CPUFREQ
Subject : ide problems: 2.6.22-git17 working, 2.6.23-rc1* is not
References : http://lkml.org/lkml/2007/7/27/298
http://lkml.org/lkml/2007/7/29/371
Last known good : ?
Submitter : dth <dth@dth.net>
Caused-By : Len Brown <lenb@kernel.org>
commit f79e3185dd0f8650022518d7624c876d8929061b
Handled-By : Len Brown <lenb@kernel.org>
Status : problem is being debugged
FS
Subject : [NFSD OOPS] 2.6.23-rc1-git10
References : http://lkml.org/lkml/2007/8/2/462
Last known good : ?
Submitter : Andrew Clayton <andrew@digital-domain.net>
Caused-By : ?
Handled-By : ?
Status : unknown
MTD
Subject : error: implicit declaration of function 'cfi_interleave'
References : http://lkml.org/lkml/2007/8/6/272
Last known good : ?
Submitter : Ingo Molnar <mingo@elte.hu>
Caused-By : ?
Handled-By : ?
Status : unknown
Networking
Subject : IP v4 routing is broken
References : http://www.stardust.webpages.pl/files/tbf/bugs/bug_report01.txt
Last known good : 2.6.22-git2
Submitter : Uwe Bugla <uwe.bugla@gmx.de>
Caused-By : ?
Handled-By : ?
Status : unknown
Subject : New wake ups from sky2
References : http://lkml.org/lkml/2007/7/20/386
Last known good : ?
Submitter : Thomas Meyer <thomas@m3y3r.de>
Caused-By : Stephen Hemminger <shemminger@osdl.org>
commit eb35cf60e462491249166182e3e755d3d5d91a28
Handled-By : Stephen Hemminger <shemminger@osdl.org>
Status : unknown
Regards,
Michal
--
LOG
http://www.stardust.webpages.pl/log/
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [2/3] 2.6.23-rc2: known regressions v2
[not found] <46B9F664.9060600@googlemail.com>
` (2 preceding siblings ...)
2007-08-08 17:11 ` Michal Piotrowski
@ 2007-08-08 17:11 ` Michal Piotrowski
2007-08-08 17:11 ` Michal Piotrowski
` (2 subsequent siblings)
6 siblings, 0 replies; 35+ messages in thread
From: Michal Piotrowski @ 2007-08-08 17:11 UTC (permalink / raw)
To: Linus Torvalds
Cc: Andrew Morton, LKML, Len Brown, dth, linux-fsdevel, nfs,
Trond Myklebust, Andrew Clayton, linux-mtd, David Woodhouse,
Ingo Molnar, Netdev, Stephen Hemminger, Thomas Meyer,
Florian Lohoff, Uwe Bugla
Hi all,
Here is a list of some known regressions in 2.6.23-rc2.
Feel free to add new regressions/remove fixed etc.
http://kernelnewbies.org/known_regressions
List of Aces
Name Regressions fixed since 21-Jun-2007
Adrian Bunk 6
Andi Kleen 4
Andrew Morton 4
Linus Torvalds 4
Al Viro 3
Cornelia Huck 3
Jens Axboe 3
Tejun Heo 3
David Woodhouse 2
Hugh Dickins 2
Peter Zijlstra 2
Trent Piepho 2
CPUFREQ
Subject : ide problems: 2.6.22-git17 working, 2.6.23-rc1* is not
References : http://lkml.org/lkml/2007/7/27/298
http://lkml.org/lkml/2007/7/29/371
Last known good : ?
Submitter : dth <dth@dth.net>
Caused-By : Len Brown <lenb@kernel.org>
commit f79e3185dd0f8650022518d7624c876d8929061b
Handled-By : Len Brown <lenb@kernel.org>
Status : problem is being debugged
FS
Subject : [NFSD OOPS] 2.6.23-rc1-git10
References : http://lkml.org/lkml/2007/8/2/462
Last known good : ?
Submitter : Andrew Clayton <andrew@digital-domain.net>
Caused-By : ?
Handled-By : ?
Status : unknown
MTD
Subject : error: implicit declaration of function 'cfi_interleave'
References : http://lkml.org/lkml/2007/8/6/272
Last known good : ?
Submitter : Ingo Molnar <mingo@elte.hu>
Caused-By : ?
Handled-By : ?
Status : unknown
Networking
Subject : IP v4 routing is broken
References : http://www.stardust.webpages.pl/files/tbf/bugs/bug_report01.txt
Last known good : 2.6.22-git2
Submitter : Uwe Bugla <uwe.bugla@gmx.de>
Caused-By : ?
Handled-By : ?
Status : unknown
Subject : New wake ups from sky2
References : http://lkml.org/lkml/2007/7/20/386
Last known good : ?
Submitter : Thomas Meyer <thomas@m3y3r.de>
Caused-By : Stephen Hemminger <shemminger@osdl.org>
commit eb35cf60e462491249166182e3e755d3d5d91a28
Handled-By : Stephen Hemminger <shemminger@osdl.org>
Status : unknown
Regards,
Michal
--
LOG
http://www.stardust.webpages.pl/log/
^ permalink raw reply [flat|nested] 35+ messages in thread* Re: [2/3] 2.6.23-rc2: known regressions v2
[not found] <46B9F664.9060600@googlemail.com>
` (3 preceding siblings ...)
2007-08-08 17:11 ` Michal Piotrowski
@ 2007-08-08 17:11 ` Michal Piotrowski
2007-08-08 17:12 ` [3/3] " Michal Piotrowski
2007-08-08 17:12 ` Michal Piotrowski
6 siblings, 0 replies; 35+ messages in thread
From: Michal Piotrowski @ 2007-08-08 17:11 UTC (permalink / raw)
To: Linus Torvalds
Cc: dth, Andrew Clayton, Netdev, Florian Lohoff, Trond Myklebust,
LKML, Uwe Bugla, nfs, Thomas Meyer, linux-fsdevel, linux-mtd,
Andrew Morton, David Woodhouse, Ingo Molnar, Stephen Hemminger,
Len Brown
Hi all,
Here is a list of some known regressions in 2.6.23-rc2.
Feel free to add new regressions/remove fixed etc.
http://kernelnewbies.org/known_regressions
List of Aces
Name Regressions fixed since 21-Jun-2007
Adrian Bunk 6
Andi Kleen 4
Andrew Morton 4
Linus Torvalds 4
Al Viro 3
Cornelia Huck 3
Jens Axboe 3
Tejun Heo 3
David Woodhouse 2
Hugh Dickins 2
Peter Zijlstra 2
Trent Piepho 2
CPUFREQ
Subject : ide problems: 2.6.22-git17 working, 2.6.23-rc1* is not
References : http://lkml.org/lkml/2007/7/27/298
http://lkml.org/lkml/2007/7/29/371
Last known good : ?
Submitter : dth <dth@dth.net>
Caused-By : Len Brown <lenb@kernel.org>
commit f79e3185dd0f8650022518d7624c876d8929061b
Handled-By : Len Brown <lenb@kernel.org>
Status : problem is being debugged
FS
Subject : [NFSD OOPS] 2.6.23-rc1-git10
References : http://lkml.org/lkml/2007/8/2/462
Last known good : ?
Submitter : Andrew Clayton <andrew@digital-domain.net>
Caused-By : ?
Handled-By : ?
Status : unknown
MTD
Subject : error: implicit declaration of function 'cfi_interleave'
References : http://lkml.org/lkml/2007/8/6/272
Last known good : ?
Submitter : Ingo Molnar <mingo@elte.hu>
Caused-By : ?
Handled-By : ?
Status : unknown
Networking
Subject : IP v4 routing is broken
References : http://www.stardust.webpages.pl/files/tbf/bugs/bug_report01.txt
Last known good : 2.6.22-git2
Submitter : Uwe Bugla <uwe.bugla@gmx.de>
Caused-By : ?
Handled-By : ?
Status : unknown
Subject : New wake ups from sky2
References : http://lkml.org/lkml/2007/7/20/386
Last known good : ?
Submitter : Thomas Meyer <thomas@m3y3r.de>
Caused-By : Stephen Hemminger <shemminger@osdl.org>
commit eb35cf60e462491249166182e3e755d3d5d91a28
Handled-By : Stephen Hemminger <shemminger@osdl.org>
Status : unknown
Regards,
Michal
--
LOG
http://www.stardust.webpages.pl/log/
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
NFS maillist - NFS@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nfs
^ permalink raw reply [flat|nested] 35+ messages in thread* Re: [3/3] 2.6.23-rc2: known regressions v2
[not found] <46B9F664.9060600@googlemail.com>
` (4 preceding siblings ...)
2007-08-08 17:11 ` Michal Piotrowski
@ 2007-08-08 17:12 ` Michal Piotrowski
2007-08-08 17:22 ` Andrew Vasquez
` (3 more replies)
2007-08-08 17:12 ` Michal Piotrowski
6 siblings, 4 replies; 35+ messages in thread
From: Michal Piotrowski @ 2007-08-08 17:12 UTC (permalink / raw)
To: Linus Torvalds
Cc: Andrew Morton, LKML, linux-pm, Rafael J. Wysocki, Pavel Machek,
Meelis Roos, linux-scsi, Andrew Vasquez, Zhang Yanmin,
linux-usb-devel, Greg KH, Alan Stern, Oliver Neukum, Tino Keitel,
Mark Hindley, Richard Henderson, Ivan Kokshaysky, Oliver Falk
Hi all,
Here is a list of some known regressions in 2.6.23-rc2.
Feel free to add new regressions/remove fixed etc.
http://kernelnewbies.org/known_regressions
List of Aces
Name Regressions fixed since 21-Jun-2007
Adrian Bunk 6
Andi Kleen 4
Andrew Morton 4
Linus Torvalds 4
Al Viro 3
Cornelia Huck 3
Jens Axboe 3
Tejun Heo 3
David Woodhouse 2
Hugh Dickins 2
Peter Zijlstra 2
Trent Piepho 2
Power management
Subject : Kconfig: 'SUSPEND_SMP' refers to undefined symbol 'HOTPLUG_CPU'
References : http://lkml.org/lkml/2007/8/4/39
Last known good : ?
Submitter : Meelis Roos <mroos@linux.ee>
Caused-By : ?
Handled-By : Rafael J. Wysocki <rjw@sisk.pl>
Status : unknown
SCSI
Subject : unable to handle kernel NULL pointer dereference in qla2x00_read_nvram_data
References : http://lkml.org/lkml/2007/8/6/506
Last known good : ?
Submitter : Zhang, Yanmin <yanmin_zhang@linux.intel.com>
Caused-By : ?
Handled-By : ?
Status : unknown
USB
Subject : 2.6.23-rc1: uhci_hcd. irq 4: nobody cared
References : http://lkml.org/lkml/2007/7/29/75
Last known good : ?
Submitter : Mark Hindley <mark@hindley.org.uk>
Caused-By : ?
Handled-By : Alan Stern <stern@rowland.harvard.edu>
Status : unknown
Subject : 2.6.23-rc1: USB hard disk broken
References : http://lkml.org/lkml/2007/7/25/62
Last known good : ?
Submitter : Tino Keitel <tino.keitel@gmx.de>
Caused-By : ?
Handled-By : Oliver Neukum <oliver@neukum.org>
Status : unknown
Alpha
Subject : -Werror compilation problem - make[1]: *** [arch/alpha/kernel/sys_titan.o] Error 1
References : http://lkml.org/lkml/2007/8/6/137
Last known good : ?
Submitter : Oliver Falk <oliver@linux-kernel.at>
Caused-By : ?
Handled-By : ?
Status : unknown
Regards,
Michal
--
LOG
http://www.stardust.webpages.pl/log/
^ permalink raw reply [flat|nested] 35+ messages in thread* Re: [3/3] 2.6.23-rc2: known regressions v2
2007-08-08 17:12 ` [3/3] " Michal Piotrowski
@ 2007-08-08 17:22 ` Andrew Vasquez
2007-08-08 20:07 ` Alan Stern
` (2 subsequent siblings)
3 siblings, 0 replies; 35+ messages in thread
From: Andrew Vasquez @ 2007-08-08 17:22 UTC (permalink / raw)
To: Michal Piotrowski
Cc: Linus Torvalds, Andrew Morton, LKML, Seokmann Ju, yanmin_zhang
On Wed, 08 Aug 2007, Michal Piotrowski wrote:
> Here is a list of some known regressions in 2.6.23-rc2.
>
> Feel free to add new regressions/remove fixed etc.
> http://kernelnewbies.org/known_regressions
...
> SCSI
>
> Subject : unable to handle kernel NULL pointer dereference in qla2x00_read_nvram_data
> References : http://lkml.org/lkml/2007/8/6/506
> Last known good : ?
> Submitter : Zhang, Yanmin <yanmin_zhang@linux.intel.com>
> Caused-By : ?
> Handled-By : ?
> Status : unknown
Already addressed in Linus' latest GIT tree:
http://article.gmane.org/gmane.linux.scsi/33472/
^ permalink raw reply [flat|nested] 35+ messages in thread* Re: [3/3] 2.6.23-rc2: known regressions v2
2007-08-08 17:12 ` [3/3] " Michal Piotrowski
@ 2007-08-08 20:07 ` Alan Stern
2007-08-08 20:07 ` Alan Stern
` (2 subsequent siblings)
3 siblings, 0 replies; 35+ messages in thread
From: Alan Stern @ 2007-08-08 20:07 UTC (permalink / raw)
To: Michal Piotrowski
Cc: USB development list, Mark Hindley, Greg KH, kexec, LKML,
Eric Biederman, Andrew Morton
On Wed, 8 Aug 2007, Michal Piotrowski wrote:
> USB
>
> Subject : 2.6.23-rc1: uhci_hcd. irq 4: nobody cared
> References : http://lkml.org/lkml/2007/7/29/75
> Last known good : ?
> Submitter : Mark Hindley <mark@hindley.org.uk>
> Caused-By : ?
> Handled-By : Alan Stern <stern@rowland.harvard.edu>
> Status : unknown
Mark has determined that this is not a regression but rather an
already-existing problem, caused by invoking kexec from within an xterm
window. See
http://marc.info/?l=linux-usb-users&m=118648557203179&w=2
Of course, this means there's liable to be something wrong with the way
kexec interacts with uhci-hcd or the other drivers sharing the same
IRQ. Failure to call the shutdown() method could cause the problem.
But I don't see why using an xterm should make any difference (unless
the only device being used was a mouse, and it was not in use while X
wasn't running).
Alan Stern
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
^ permalink raw reply [flat|nested] 35+ messages in thread* Re: [3/3] 2.6.23-rc2: known regressions v2
@ 2007-08-08 20:07 ` Alan Stern
0 siblings, 0 replies; 35+ messages in thread
From: Alan Stern @ 2007-08-08 20:07 UTC (permalink / raw)
To: Michal Piotrowski
Cc: Andrew Morton, LKML, USB development list, Greg KH, Mark Hindley,
Eric Biederman, kexec
On Wed, 8 Aug 2007, Michal Piotrowski wrote:
> USB
>
> Subject : 2.6.23-rc1: uhci_hcd. irq 4: nobody cared
> References : http://lkml.org/lkml/2007/7/29/75
> Last known good : ?
> Submitter : Mark Hindley <mark@hindley.org.uk>
> Caused-By : ?
> Handled-By : Alan Stern <stern@rowland.harvard.edu>
> Status : unknown
Mark has determined that this is not a regression but rather an
already-existing problem, caused by invoking kexec from within an xterm
window. See
http://marc.info/?l=linux-usb-users&m=118648557203179&w=2
Of course, this means there's liable to be something wrong with the way
kexec interacts with uhci-hcd or the other drivers sharing the same
IRQ. Failure to call the shutdown() method could cause the problem.
But I don't see why using an xterm should make any difference (unless
the only device being used was a mouse, and it was not in use while X
wasn't running).
Alan Stern
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [3/3] 2.6.23-rc2: known regressions v2
2007-08-08 17:12 ` [3/3] " Michal Piotrowski
2007-08-08 17:22 ` Andrew Vasquez
2007-08-08 20:07 ` Alan Stern
@ 2007-08-08 20:10 ` Rafael J. Wysocki
2007-08-10 19:03 ` Meelis Roos
2007-08-10 19:03 ` Meelis Roos
2007-08-08 20:10 ` Rafael J. Wysocki
3 siblings, 2 replies; 35+ messages in thread
From: Rafael J. Wysocki @ 2007-08-08 20:10 UTC (permalink / raw)
To: Michal Piotrowski
Cc: Linus Torvalds, Andrew Morton, LKML, linux-pm, Pavel Machek,
Meelis Roos
On Wednesday, 8 August 2007 19:12, Michal Piotrowski wrote:
> Hi all,
>
> Here is a list of some known regressions in 2.6.23-rc2.
>
> Feel free to add new regressions/remove fixed etc.
> http://kernelnewbies.org/known_regressions
>
> List of Aces
>
> Name Regressions fixed since 21-Jun-2007
> Adrian Bunk 6
> Andi Kleen 4
> Andrew Morton 4
> Linus Torvalds 4
> Al Viro 3
> Cornelia Huck 3
> Jens Axboe 3
> Tejun Heo 3
> David Woodhouse 2
> Hugh Dickins 2
> Peter Zijlstra 2
> Trent Piepho 2
>
>
>
> Power management
>
> Subject : Kconfig: 'SUSPEND_SMP' refers to undefined symbol 'HOTPLUG_CPU'
> References : http://lkml.org/lkml/2007/8/4/39
> Last known good : ?
> Submitter : Meelis Roos <mroos@linux.ee>
> Caused-By : ?
> Handled-By : Rafael J. Wysocki <rjw@sisk.pl>
> Status : unknown
I can't reproduce this with my cross compilation toolchain for PPC.
Greetings,
Rafael
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [3/3] 2.6.23-rc2: known regressions v2
2007-08-08 20:10 ` Rafael J. Wysocki
@ 2007-08-10 19:03 ` Meelis Roos
2007-08-10 19:24 ` Rafael J. Wysocki
2007-08-10 19:24 ` Rafael J. Wysocki
2007-08-10 19:03 ` Meelis Roos
1 sibling, 2 replies; 35+ messages in thread
From: Meelis Roos @ 2007-08-10 19:03 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Michal Piotrowski, Linus Torvalds, Andrew Morton, LKML, linux-pm,
Pavel Machek
> > Power management
> >
> > Subject : Kconfig: 'SUSPEND_SMP' refers to undefined symbol 'HOTPLUG_CPU'
> > References : http://lkml.org/lkml/2007/8/4/39
> > Last known good : ?
> > Submitter : Meelis Roos <mroos@linux.ee>
> > Caused-By : ?
> > Handled-By : Rafael J. Wysocki <rjw@sisk.pl>
> > Status : unknown
>
> I can't reproduce this with my cross compilation toolchain for PPC.
Still present with todays git and make oldconfig, on native powerpc with
Debian unstable.
--
Meelis Roos (mroos@linux.ee)
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [3/3] 2.6.23-rc2: known regressions v2
2007-08-10 19:03 ` Meelis Roos
@ 2007-08-10 19:24 ` Rafael J. Wysocki
2007-08-10 19:29 ` Meelis Roos
2007-08-10 19:29 ` Meelis Roos
2007-08-10 19:24 ` Rafael J. Wysocki
1 sibling, 2 replies; 35+ messages in thread
From: Rafael J. Wysocki @ 2007-08-10 19:24 UTC (permalink / raw)
To: Meelis Roos
Cc: Michal Piotrowski, Linus Torvalds, Andrew Morton, LKML, linux-pm,
Pavel Machek
On Friday, 10 August 2007 21:03, Meelis Roos wrote:
> > > Power management
> > >
> > > Subject : Kconfig: 'SUSPEND_SMP' refers to undefined symbol 'HOTPLUG_CPU'
> > > References : http://lkml.org/lkml/2007/8/4/39
> > > Last known good : ?
> > > Submitter : Meelis Roos <mroos@linux.ee>
> > > Caused-By : ?
> > > Handled-By : Rafael J. Wysocki <rjw@sisk.pl>
> > > Status : unknown
> >
> > I can't reproduce this with my cross compilation toolchain for PPC.
>
> Still present with todays git and make oldconfig, on native powerpc with
> Debian unstable.
1. Is that with the same .config you sent me previously?
2. What exactly is the consequence of this warning?
3. Can you please check if this patch changes anything:
http://marc.info/?l=linux-mm-commits&m=118669680811669&w=2
Greetings,
Rafael
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [3/3] 2.6.23-rc2: known regressions v2
2007-08-10 19:24 ` Rafael J. Wysocki
@ 2007-08-10 19:29 ` Meelis Roos
2007-08-10 19:29 ` Meelis Roos
1 sibling, 0 replies; 35+ messages in thread
From: Meelis Roos @ 2007-08-10 19:29 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Michal Piotrowski, LKML, Pavel Machek, Andrew Morton,
Linus Torvalds, linux-pm
> 1. Is that with the same .config you sent me previously?
Yes, just ran it through make oldconfig again, included below.
> 2. What exactly is the consequence of this warning?
I hope no big trouble (i.e. only a warning during make *config) but I
haven't boot-tested rc2 and newer kernels yet because it's a remote
machine. Will try some day now.
> 3. Can you please check if this patch changes anything:
> http://marc.info/?l=linux-mm-commits&m=118669680811669&w=2
Tried it on current git, kernel/power/Kconfig gave 2 rejects.
Tried on 2.6.23-rc2, still 2 rejects from the same file, .rej below:
*************** config PM_TRACE
*** 72,86 ****
CAUTION: this option will cause your machine's real-time clock to be
set to an invalid time after a resume.
- config SUSPEND_SMP_POSSIBLE
- bool
- depends on (X86 && !X86_VOYAGER) || (PPC64 && (PPC_PSERIES || PPC_PMAC))
- depends on SMP
- default y
-
- config SUSPEND_SMP
bool
- depends on SUSPEND_SMP_POSSIBLE && PM_SLEEP
select HOTPLUG_CPU
default y
--- 72,81 ----
CAUTION: this option will cause your machine's real-time clock to be
set to an invalid time after a resume.
+ config PM_SLEEP_SMP
bool
+ depends on SUSPEND_SMP_POSSIBLE || HIBERNATION_SMP_POSSIBLE
+ depends on PM_SLEEP
select HOTPLUG_CPU
default y
*************** config PM_SLEEP
*** 89,108 ****
depends on SUSPEND || HIBERNATION
default y
config SUSPEND
bool "Suspend to RAM and standby"
depends on PM
- depends on !SMP || SUSPEND_SMP_POSSIBLE
default y
---help---
Allow the system to enter sleep states in which main memory is
powered and thus its contents are preserved, such as the
suspend-to-RAM state (i.e. the ACPI S3 state).
config HIBERNATION
bool "Hibernation (aka 'suspend to disk')"
depends on PM && SWAP
- depends on ((X86 || PPC64_SWSUSP || FRV || PPC32) && !SMP) || SUSPEND_SMP_POSSIBLE
---help---
Enable the suspend to disk (STD) functionality, which is usually
called "hibernation" in user interfaces. STD checkpoints the
--- 84,129 ----
depends on SUSPEND || HIBERNATION
default y
+ config SUSPEND_UP_POSSIBLE
+ bool
+ depends on (X86 && !X86_VOYAGER) || PPC || ARM || BLACKFIN || MIPS \
+ || SUPERH || FRV
+ depends on !SMP
+ default y
+
+ config SUSPEND_SMP_POSSIBLE
+ bool
+ depends on (X86 && !X86_VOYAGER) \
+ || (PPC && (PPC_PSERIES || PPC_PMAC)) || ARM
+ depends on SMP
+ default y
+
config SUSPEND
bool "Suspend to RAM and standby"
depends on PM
+ depends on SUSPEND_UP_POSSIBLE || SUSPEND_SMP_POSSIBLE
default y
---help---
Allow the system to enter sleep states in which main memory is
powered and thus its contents are preserved, such as the
suspend-to-RAM state (i.e. the ACPI S3 state).
+ config HIBERNATION_UP_POSSIBLE
+ bool
+ depends on X86 || PPC64_SWSUSP || FRV || PPC32
+ depends on !SMP
+ default y
+
+ config HIBERNATION_SMP_POSSIBLE
+ bool
+ depends on (X86 && !X86_VOYAGER) || PPC64_SWSUSP
+ depends on SMP
+ default y
+
config HIBERNATION
bool "Hibernation (aka 'suspend to disk')"
depends on PM && SWAP
+ depends on HIBERNATION_UP_POSSIBLE || HIBERNATION_SMP_POSSIBLE
---help---
Enable the suspend to disk (STD) functionality, which is usually
called "hibernation" in user interfaces. STD checkpoints the
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.23-rc2
# Fri Aug 10 12:51:07 2007
#
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_GENERIC_NVRAM=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_BUG=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_LSF=y
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor
#
CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_8xx is not set
# CONFIG_E200 is not set
# CONFIG_E500 is not set
CONFIG_PPC_FPU=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_ALTIVEC is not set
# CONFIG_TAU is not set
# CONFIG_KEXEC is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_PPC601_SYNC_FIX is not set
# CONFIG_WANT_EARLY_SERIAL is not set
CONFIG_PPC_STD_MMU=y
#
# Platform options
#
CONFIG_PPC_PREP=y
# CONFIG_APUS is not set
# CONFIG_KATANA is not set
# CONFIG_WILLOW is not set
# CONFIG_CPCI690 is not set
# CONFIG_POWERPMC250 is not set
# CONFIG_CHESTNUT is not set
# CONFIG_SPRUCE is not set
# CONFIG_HDPU is not set
# CONFIG_EV64260 is not set
# CONFIG_LOPEC is not set
# CONFIG_MVME5100 is not set
# CONFIG_PPLUS is not set
# CONFIG_PRPMC750 is not set
# CONFIG_PRPMC800 is not set
# CONFIG_SANDPOINT is not set
# CONFIG_RADSTONE_PPC7D is not set
# CONFIG_PAL4 is not set
# CONFIG_EST8260 is not set
# CONFIG_SBC82xx is not set
# CONFIG_SBS8260 is not set
# CONFIG_RPX8260 is not set
# CONFIG_TQM8260 is not set
# CONFIG_ADS8272 is not set
# CONFIG_PQ2FADS is not set
# CONFIG_LITE5200 is not set
# CONFIG_MPC834x_SYS is not set
# CONFIG_EV64360 is not set
CONFIG_PPCBUG_NVRAM=y
# CONFIG_SMP is not set
# CONFIG_HIGHMEM is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_PREP_RESIDUAL=y
CONFIG_PROC_PREPRESIDUAL=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,9600 console=tty0 root=/dev/sda3"
# CONFIG_PM is not set
# CONFIG_SECCOMP is not set
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ISA=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_I8259=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_BOOT_LOAD=0x00800000
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK_ENABLED=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
#
# DECnet: Netfilter Configuration
#
# CONFIG_DECNET_NF_GRABULATOR is not set
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
CONFIG_SCTP_HMAC_SHA1=y
# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
CONFIG_LLC2=m
# CONFIG_IPX is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_LTPC=m
CONFIG_COPS=m
CONFIG_COPS_DAYNA=y
CONFIG_COPS_TANGENT=y
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_FIFO=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RR=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
# CONFIG_NET_CLS_POLICE is not set
CONFIG_NET_CLS_IND=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_AF_RXRPC=m
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=m
CONFIG_FIB_RULES=y
#
# Wireless
#
CONFIG_CFG80211=m
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=m
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_ISAPNP=y
# CONFIG_PNPACPI is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
CONFIG_BLK_DEV_DAC960=m
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
CONFIG_EEPROM_93CX6=m
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_DPT_I2O=m
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_ARCMSR is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_SRP=m
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_AHCI=m
CONFIG_SATA_SVW=m
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SX4=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIL24=m
CONFIG_SATA_SIS=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
CONFIG_SATA_INIC162X=m
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
# CONFIG_PATA_ATIIXP is not set
CONFIG_PATA_CMD640_PCI=m
CONFIG_PATA_CMD64X=m
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
CONFIG_PATA_HPT3X3_DMA=y
# CONFIG_PATA_ISAPNP is not set
CONFIG_PATA_IT821X=m
CONFIG_PATA_IT8213=m
CONFIG_PATA_JMICRON=m
# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_MARVELL=m
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_QDI is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
CONFIG_PATA_WINBOND_VLB=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
CONFIG_DM_MULTIPATH_RDAC=m
CONFIG_DM_DELAY=m
#
# Fusion MPT device support
#
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
# CONFIG_FUSION_LAN is not set
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
#
# Controllers
#
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m
#
# Protocols
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_WINDFARM is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_IFB=m
# CONFIG_DUMMY is not set
CONFIG_BONDING=m
CONFIG_MACVLAN=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_FIXED_PHY=m
CONFIG_FIXED_MII_10_FDX=y
CONFIG_FIXED_MII_100_FDX=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
# CONFIG_EL3 is not set
# CONFIG_3C515 is not set
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=y
CONFIG_TULIP_MWI=y
CONFIG_TULIP_MMIO=y
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_PCNET32_NAPI=y
CONFIG_AMD8111_ETH=m
CONFIG_AMD8111E_NAPI=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_ADAPTEC_STARFIRE_NAPI=y
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
CONFIG_B44=m
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
CONFIG_NATSEMI=m
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
CONFIG_VIA_RHINE_NAPI=y
CONFIG_SC92031=m
# CONFIG_NET_POCKET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_MLX4_CORE is not set
CONFIG_TR=y
# CONFIG_IBMTR is not set
CONFIG_IBMOL=m
CONFIG_IBMLS=m
CONFIG_3C359=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
# CONFIG_SKISA is not set
# CONFIG_PROTEON is not set
CONFIG_ABYSS=m
# CONFIG_SMCTR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
CONFIG_RTL8187=m
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_BCM43XX=m
# CONFIG_BCM43XX_DEBUG is not set
CONFIG_BCM43XX_DMA=y
CONFIG_BCM43XX_PIO=y
CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
# CONFIG_BCM43XX_DMA_MODE is not set
# CONFIG_BCM43XX_PIO_MODE is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET_MII=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
# CONFIG_WAN is not set
CONFIG_FDDI=y
CONFIG_DEFXX=m
CONFIG_DEFXX_MMIO=y
CONFIG_SKFP=m
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOL2TP=m
# CONFIG_SLIP is not set
CONFIG_SLHC=m
CONFIG_NET_FC=y
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=m
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
CONFIG_INPUT_ATI_REMOTE=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
#
# ISA-based Watchdog Cards
#
# CONFIG_PCWATCHDOG is not set
# CONFIG_MIXCOMWD is not set
# CONFIG_WDT is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_HW_RANDOM=m
CONFIG_NVRAM=m
CONFIG_GEN_RTC=y
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
CONFIG_I2C_TINY_USB=m
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_M41T00 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set
#
# Graphics support
#
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=m
CONFIG_FB_MACMODES=y
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_CT65550 is not set
# CONFIG_FB_ASILIANT is not set
CONFIG_FB_IMSTT=y
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_MATROX_MULTIHEAD=y
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
# CONFIG_FB_ATY_BACKLIGHT is not set
CONFIG_FB_S3=m
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
CONFIG_FB_PM3=m
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_CS4231_LIB=m
#
# ISA devices
#
# CONFIG_SND_ADLIB is not set
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
CONFIG_SND_CS4236=m
# CONFIG_SND_DT019X is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_MIRO is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
# CONFIG_SND_WAVEFRONT is not set
#
# PCI devices
#
CONFIG_SND_AD1889=m
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_KORG1212 is not set
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL=y
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
CONFIG_SND_YMFPCI=m
CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
CONFIG_SND_AC97_POWER_SAVE=y
#
# ALSA PowerMac devices
#
#
# ALSA PowerPC devices
#
#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# SoC Audio support for SuperH
#
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
CONFIG_USB_STORAGE_KARMA=y
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
# CONFIG_USB_MON is not set
#
# USB port drivers
#
CONFIG_USB_USS720=m
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_DEBUG=m
CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
CONFIG_USB_BERRY_CHARGE=m
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
# CONFIG_AUXDISPLAY is not set
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4DEV_FS=m
CONFIG_EXT4DEV_FS_XATTR=y
CONFIG_EXT4DEV_FS_POSIX_ACL=y
CONFIG_EXT4DEV_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_NOLOCK=m
CONFIG_GFS2_FS_LOCKING_DLM=m
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=775
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_EFS_FS=m
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp775"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_CIFS_UPCALL=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Distributed Lock Manager
#
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_XMON is not set
# CONFIG_BDI_SWITCH is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ABLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_HW=y
--
Meelis Roos (mroos@linux.ee)
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [3/3] 2.6.23-rc2: known regressions v2
2007-08-10 19:24 ` Rafael J. Wysocki
2007-08-10 19:29 ` Meelis Roos
@ 2007-08-10 19:29 ` Meelis Roos
2007-08-10 20:06 ` Rafael J. Wysocki
` (3 more replies)
1 sibling, 4 replies; 35+ messages in thread
From: Meelis Roos @ 2007-08-10 19:29 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Michal Piotrowski, Linus Torvalds, Andrew Morton, LKML, linux-pm,
Pavel Machek
> 1. Is that with the same .config you sent me previously?
Yes, just ran it through make oldconfig again, included below.
> 2. What exactly is the consequence of this warning?
I hope no big trouble (i.e. only a warning during make *config) but I
haven't boot-tested rc2 and newer kernels yet because it's a remote
machine. Will try some day now.
> 3. Can you please check if this patch changes anything:
> http://marc.info/?l=linux-mm-commits&m=118669680811669&w=2
Tried it on current git, kernel/power/Kconfig gave 2 rejects.
Tried on 2.6.23-rc2, still 2 rejects from the same file, .rej below:
*************** config PM_TRACE
*** 72,86 ****
CAUTION: this option will cause your machine's real-time clock to be
set to an invalid time after a resume.
- config SUSPEND_SMP_POSSIBLE
- bool
- depends on (X86 && !X86_VOYAGER) || (PPC64 && (PPC_PSERIES || PPC_PMAC))
- depends on SMP
- default y
-
- config SUSPEND_SMP
bool
- depends on SUSPEND_SMP_POSSIBLE && PM_SLEEP
select HOTPLUG_CPU
default y
--- 72,81 ----
CAUTION: this option will cause your machine's real-time clock to be
set to an invalid time after a resume.
+ config PM_SLEEP_SMP
bool
+ depends on SUSPEND_SMP_POSSIBLE || HIBERNATION_SMP_POSSIBLE
+ depends on PM_SLEEP
select HOTPLUG_CPU
default y
*************** config PM_SLEEP
*** 89,108 ****
depends on SUSPEND || HIBERNATION
default y
config SUSPEND
bool "Suspend to RAM and standby"
depends on PM
- depends on !SMP || SUSPEND_SMP_POSSIBLE
default y
---help---
Allow the system to enter sleep states in which main memory is
powered and thus its contents are preserved, such as the
suspend-to-RAM state (i.e. the ACPI S3 state).
config HIBERNATION
bool "Hibernation (aka 'suspend to disk')"
depends on PM && SWAP
- depends on ((X86 || PPC64_SWSUSP || FRV || PPC32) && !SMP) || SUSPEND_SMP_POSSIBLE
---help---
Enable the suspend to disk (STD) functionality, which is usually
called "hibernation" in user interfaces. STD checkpoints the
--- 84,129 ----
depends on SUSPEND || HIBERNATION
default y
+ config SUSPEND_UP_POSSIBLE
+ bool
+ depends on (X86 && !X86_VOYAGER) || PPC || ARM || BLACKFIN || MIPS \
+ || SUPERH || FRV
+ depends on !SMP
+ default y
+
+ config SUSPEND_SMP_POSSIBLE
+ bool
+ depends on (X86 && !X86_VOYAGER) \
+ || (PPC && (PPC_PSERIES || PPC_PMAC)) || ARM
+ depends on SMP
+ default y
+
config SUSPEND
bool "Suspend to RAM and standby"
depends on PM
+ depends on SUSPEND_UP_POSSIBLE || SUSPEND_SMP_POSSIBLE
default y
---help---
Allow the system to enter sleep states in which main memory is
powered and thus its contents are preserved, such as the
suspend-to-RAM state (i.e. the ACPI S3 state).
+ config HIBERNATION_UP_POSSIBLE
+ bool
+ depends on X86 || PPC64_SWSUSP || FRV || PPC32
+ depends on !SMP
+ default y
+
+ config HIBERNATION_SMP_POSSIBLE
+ bool
+ depends on (X86 && !X86_VOYAGER) || PPC64_SWSUSP
+ depends on SMP
+ default y
+
config HIBERNATION
bool "Hibernation (aka 'suspend to disk')"
depends on PM && SWAP
+ depends on HIBERNATION_UP_POSSIBLE || HIBERNATION_SMP_POSSIBLE
---help---
Enable the suspend to disk (STD) functionality, which is usually
called "hibernation" in user interfaces. STD checkpoints the
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.23-rc2
# Fri Aug 10 12:51:07 2007
#
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_GENERIC_NVRAM=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_BUG=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_LSF=y
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor
#
CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_8xx is not set
# CONFIG_E200 is not set
# CONFIG_E500 is not set
CONFIG_PPC_FPU=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_ALTIVEC is not set
# CONFIG_TAU is not set
# CONFIG_KEXEC is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_PPC601_SYNC_FIX is not set
# CONFIG_WANT_EARLY_SERIAL is not set
CONFIG_PPC_STD_MMU=y
#
# Platform options
#
CONFIG_PPC_PREP=y
# CONFIG_APUS is not set
# CONFIG_KATANA is not set
# CONFIG_WILLOW is not set
# CONFIG_CPCI690 is not set
# CONFIG_POWERPMC250 is not set
# CONFIG_CHESTNUT is not set
# CONFIG_SPRUCE is not set
# CONFIG_HDPU is not set
# CONFIG_EV64260 is not set
# CONFIG_LOPEC is not set
# CONFIG_MVME5100 is not set
# CONFIG_PPLUS is not set
# CONFIG_PRPMC750 is not set
# CONFIG_PRPMC800 is not set
# CONFIG_SANDPOINT is not set
# CONFIG_RADSTONE_PPC7D is not set
# CONFIG_PAL4 is not set
# CONFIG_EST8260 is not set
# CONFIG_SBC82xx is not set
# CONFIG_SBS8260 is not set
# CONFIG_RPX8260 is not set
# CONFIG_TQM8260 is not set
# CONFIG_ADS8272 is not set
# CONFIG_PQ2FADS is not set
# CONFIG_LITE5200 is not set
# CONFIG_MPC834x_SYS is not set
# CONFIG_EV64360 is not set
CONFIG_PPCBUG_NVRAM=y
# CONFIG_SMP is not set
# CONFIG_HIGHMEM is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_PREP_RESIDUAL=y
CONFIG_PROC_PREPRESIDUAL=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,9600 console=tty0 root=/dev/sda3"
# CONFIG_PM is not set
# CONFIG_SECCOMP is not set
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ISA=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_I8259=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_BOOT_LOAD=0x00800000
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK_ENABLED=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
#
# DECnet: Netfilter Configuration
#
# CONFIG_DECNET_NF_GRABULATOR is not set
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
CONFIG_SCTP_HMAC_SHA1=y
# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
CONFIG_LLC2=m
# CONFIG_IPX is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_LTPC=m
CONFIG_COPS=m
CONFIG_COPS_DAYNA=y
CONFIG_COPS_TANGENT=y
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_FIFO=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RR=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
# CONFIG_NET_CLS_POLICE is not set
CONFIG_NET_CLS_IND=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_AF_RXRPC=m
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=m
CONFIG_FIB_RULES=y
#
# Wireless
#
CONFIG_CFG80211=m
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=m
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_ISAPNP=y
# CONFIG_PNPACPI is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
CONFIG_BLK_DEV_DAC960=m
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
CONFIG_EEPROM_93CX6=m
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_DPT_I2O=m
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_ARCMSR is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_SRP=m
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_AHCI=m
CONFIG_SATA_SVW=m
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SX4=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIL24=m
CONFIG_SATA_SIS=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
CONFIG_SATA_INIC162X=m
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
# CONFIG_PATA_ATIIXP is not set
CONFIG_PATA_CMD640_PCI=m
CONFIG_PATA_CMD64X=m
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
CONFIG_PATA_HPT3X3_DMA=y
# CONFIG_PATA_ISAPNP is not set
CONFIG_PATA_IT821X=m
CONFIG_PATA_IT8213=m
CONFIG_PATA_JMICRON=m
# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_MARVELL=m
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_QDI is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
CONFIG_PATA_WINBOND_VLB=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
CONFIG_DM_MULTIPATH_RDAC=m
CONFIG_DM_DELAY=m
#
# Fusion MPT device support
#
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
# CONFIG_FUSION_LAN is not set
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
#
# Controllers
#
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m
#
# Protocols
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_WINDFARM is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_IFB=m
# CONFIG_DUMMY is not set
CONFIG_BONDING=m
CONFIG_MACVLAN=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_FIXED_PHY=m
CONFIG_FIXED_MII_10_FDX=y
CONFIG_FIXED_MII_100_FDX=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
# CONFIG_EL3 is not set
# CONFIG_3C515 is not set
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=y
CONFIG_TULIP_MWI=y
CONFIG_TULIP_MMIO=y
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_PCNET32_NAPI=y
CONFIG_AMD8111_ETH=m
CONFIG_AMD8111E_NAPI=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_ADAPTEC_STARFIRE_NAPI=y
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
CONFIG_B44=m
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
CONFIG_NATSEMI=m
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
CONFIG_VIA_RHINE_NAPI=y
CONFIG_SC92031=m
# CONFIG_NET_POCKET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_MLX4_CORE is not set
CONFIG_TR=y
# CONFIG_IBMTR is not set
CONFIG_IBMOL=m
CONFIG_IBMLS=m
CONFIG_3C359=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
# CONFIG_SKISA is not set
# CONFIG_PROTEON is not set
CONFIG_ABYSS=m
# CONFIG_SMCTR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
CONFIG_RTL8187=m
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_BCM43XX=m
# CONFIG_BCM43XX_DEBUG is not set
CONFIG_BCM43XX_DMA=y
CONFIG_BCM43XX_PIO=y
CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
# CONFIG_BCM43XX_DMA_MODE is not set
# CONFIG_BCM43XX_PIO_MODE is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET_MII=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
# CONFIG_WAN is not set
CONFIG_FDDI=y
CONFIG_DEFXX=m
CONFIG_DEFXX_MMIO=y
CONFIG_SKFP=m
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOL2TP=m
# CONFIG_SLIP is not set
CONFIG_SLHC=m
CONFIG_NET_FC=y
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=m
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
CONFIG_INPUT_ATI_REMOTE=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
#
# ISA-based Watchdog Cards
#
# CONFIG_PCWATCHDOG is not set
# CONFIG_MIXCOMWD is not set
# CONFIG_WDT is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_HW_RANDOM=m
CONFIG_NVRAM=m
CONFIG_GEN_RTC=y
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
CONFIG_I2C_TINY_USB=m
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_M41T00 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set
#
# Graphics support
#
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=m
CONFIG_FB_MACMODES=y
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_CT65550 is not set
# CONFIG_FB_ASILIANT is not set
CONFIG_FB_IMSTT=y
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_MATROX_MULTIHEAD=y
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
# CONFIG_FB_ATY_BACKLIGHT is not set
CONFIG_FB_S3=m
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
CONFIG_FB_PM3=m
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_CS4231_LIB=m
#
# ISA devices
#
# CONFIG_SND_ADLIB is not set
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
CONFIG_SND_CS4236=m
# CONFIG_SND_DT019X is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_MIRO is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
# CONFIG_SND_WAVEFRONT is not set
#
# PCI devices
#
CONFIG_SND_AD1889=m
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_KORG1212 is not set
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL=y
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
CONFIG_SND_YMFPCI=m
CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
CONFIG_SND_AC97_POWER_SAVE=y
#
# ALSA PowerMac devices
#
#
# ALSA PowerPC devices
#
#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# SoC Audio support for SuperH
#
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
CONFIG_USB_STORAGE_KARMA=y
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
# CONFIG_USB_MON is not set
#
# USB port drivers
#
CONFIG_USB_USS720=m
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_DEBUG=m
CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
CONFIG_USB_BERRY_CHARGE=m
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
# CONFIG_AUXDISPLAY is not set
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4DEV_FS=m
CONFIG_EXT4DEV_FS_XATTR=y
CONFIG_EXT4DEV_FS_POSIX_ACL=y
CONFIG_EXT4DEV_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_NOLOCK=m
CONFIG_GFS2_FS_LOCKING_DLM=m
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=775
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_EFS_FS=m
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp775"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_CIFS_UPCALL=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Distributed Lock Manager
#
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_XMON is not set
# CONFIG_BDI_SWITCH is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ABLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_HW=y
--
Meelis Roos (mroos@linux.ee)
^ permalink raw reply [flat|nested] 35+ messages in thread* Re: [3/3] 2.6.23-rc2: known regressions v2
2007-08-10 19:29 ` Meelis Roos
@ 2007-08-10 20:06 ` Rafael J. Wysocki
2007-08-11 10:53 ` Meelis Roos
2007-08-11 10:53 ` Meelis Roos
2007-08-10 20:06 ` Rafael J. Wysocki
` (2 subsequent siblings)
3 siblings, 2 replies; 35+ messages in thread
From: Rafael J. Wysocki @ 2007-08-10 20:06 UTC (permalink / raw)
To: Meelis Roos
Cc: Michal Piotrowski, Linus Torvalds, Andrew Morton, LKML, linux-pm,
Pavel Machek
On Friday, 10 August 2007 21:29, Meelis Roos wrote:
> > 1. Is that with the same .config you sent me previously?
>
> Yes, just ran it through make oldconfig again, included below.
>
> > 2. What exactly is the consequence of this warning?
>
> I hope no big trouble (i.e. only a warning during make *config) but I
> haven't boot-tested rc2 and newer kernels yet because it's a remote
> machine. Will try some day now.
>
> > 3. Can you please check if this patch changes anything:
> > http://marc.info/?l=linux-mm-commits&m=118669680811669&w=2
>
> Tried it on current git, kernel/power/Kconfig gave 2 rejects.
> Tried on 2.6.23-rc2, still 2 rejects from the same file, .rej below:
Sorry, but:
rafael@albercik:~/src/linux-2.6> git-pull git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
Already up-to-date.
rafael@albercik:~/src/linux-2.6> cat ~/pm-fix-dependencies-of-config_suspend-and-config_hibernation-updated-3x.patch | patch -p1
patching file arch/x86_64/defconfig
patching file include/linux/cpu.h
patching file kernel/cpu.c
patching file kernel/power/Kconfig
How come?
Greetings,
Rafael
^ permalink raw reply [flat|nested] 35+ messages in thread* Re: [3/3] 2.6.23-rc2: known regressions v2
2007-08-10 20:06 ` Rafael J. Wysocki
@ 2007-08-11 10:53 ` Meelis Roos
2007-08-11 21:42 ` Rafael J. Wysocki
2007-08-11 21:42 ` Rafael J. Wysocki
2007-08-11 10:53 ` Meelis Roos
1 sibling, 2 replies; 35+ messages in thread
From: Meelis Roos @ 2007-08-11 10:53 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Michal Piotrowski, Linus Torvalds, Andrew Morton, LKML, linux-pm,
Pavel Machek
> > > 3. Can you please check if this patch changes anything:
> > > http://marc.info/?l=linux-mm-commits&m=118669680811669&w=2
> >
> > Tried it on current git, kernel/power/Kconfig gave 2 rejects.
> > Tried on 2.6.23-rc2, still 2 rejects from the same file, .rej below:
>
> Sorry, but:
>
> rafael@albercik:~/src/linux-2.6> git-pull git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
> Already up-to-date.
> rafael@albercik:~/src/linux-2.6> cat ~/pm-fix-dependencies-of-config_suspend-and-config_hibernation-updated-3x.patch | patch -p1
> patching file arch/x86_64/defconfig
> patching file include/linux/cpu.h
> patching file kernel/cpu.c
> patching file kernel/power/Kconfig
>
> How come?
Hmm, must have been mangled on the web (downloaded via wget so should be
byte-by-byte exact). I now downloaded it from akpm-s broken-out tarball
and this one applied fine.
The patch changes the warning to a different warning, it's now
kernel/power/Kconfig:79:warning: 'select' used by config symbol 'PM_SLEEP_SMP' refers to undefined symbol 'HOTPLUG_CPU'
The warning also appears when running just "make ARCH=ppc" after
"make ARCH=ppc oldconfig".
--
Meelis Roos (mroos@linux.ee)
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [3/3] 2.6.23-rc2: known regressions v2
2007-08-11 10:53 ` Meelis Roos
@ 2007-08-11 21:42 ` Rafael J. Wysocki
2007-08-11 21:42 ` Rafael J. Wysocki
1 sibling, 0 replies; 35+ messages in thread
From: Rafael J. Wysocki @ 2007-08-11 21:42 UTC (permalink / raw)
To: Meelis Roos
Cc: Michal Piotrowski, LKML, Pavel Machek, Andrew Morton,
Linus Torvalds, linux-pm
On Saturday, 11 August 2007 12:53, Meelis Roos wrote:
> > > > 3. Can you please check if this patch changes anything:
> > > > http://marc.info/?l=linux-mm-commits&m=118669680811669&w=2
> > >
> > > Tried it on current git, kernel/power/Kconfig gave 2 rejects.
> > > Tried on 2.6.23-rc2, still 2 rejects from the same file, .rej below:
> >
> > Sorry, but:
> >
> > rafael@albercik:~/src/linux-2.6> git-pull git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
> > Already up-to-date.
> > rafael@albercik:~/src/linux-2.6> cat ~/pm-fix-dependencies-of-config_suspend-and-config_hibernation-updated-3x.patch | patch -p1
> > patching file arch/x86_64/defconfig
> > patching file include/linux/cpu.h
> > patching file kernel/cpu.c
> > patching file kernel/power/Kconfig
> >
> > How come?
>
> Hmm, must have been mangled on the web (downloaded via wget so should be
> byte-by-byte exact). I now downloaded it from akpm-s broken-out tarball
> and this one applied fine.
>
> The patch changes the warning to a different warning, it's now
> kernel/power/Kconfig:79:warning: 'select' used by config symbol 'PM_SLEEP_SMP' refers to undefined symbol 'HOTPLUG_CPU'
>
> The warning also appears when running just "make ARCH=ppc" after
> "make ARCH=ppc oldconfig".
Yes, I have reproduced it now.
Well, it's clearly a false positive, since none of the options PM_SLEEP_SMP
depends on is set in your .config. Also, it seems to be ppc-specific (for
example, if I change the architecture to powerpc, the warning doesn't show up).
The only problem I see here is that the warning in fact should not be printed,
but I don't know how to make the build system stop printing it.
Greetings,
Rafael
--
"Premature optimization is the root of all evil." - Donald Knuth
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [3/3] 2.6.23-rc2: known regressions v2
2007-08-11 10:53 ` Meelis Roos
2007-08-11 21:42 ` Rafael J. Wysocki
@ 2007-08-11 21:42 ` Rafael J. Wysocki
2007-08-13 13:21 ` Michal Piotrowski
1 sibling, 1 reply; 35+ messages in thread
From: Rafael J. Wysocki @ 2007-08-11 21:42 UTC (permalink / raw)
To: Meelis Roos
Cc: Michal Piotrowski, Linus Torvalds, Andrew Morton, LKML, linux-pm,
Pavel Machek
On Saturday, 11 August 2007 12:53, Meelis Roos wrote:
> > > > 3. Can you please check if this patch changes anything:
> > > > http://marc.info/?l=linux-mm-commits&m=118669680811669&w=2
> > >
> > > Tried it on current git, kernel/power/Kconfig gave 2 rejects.
> > > Tried on 2.6.23-rc2, still 2 rejects from the same file, .rej below:
> >
> > Sorry, but:
> >
> > rafael@albercik:~/src/linux-2.6> git-pull git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
> > Already up-to-date.
> > rafael@albercik:~/src/linux-2.6> cat ~/pm-fix-dependencies-of-config_suspend-and-config_hibernation-updated-3x.patch | patch -p1
> > patching file arch/x86_64/defconfig
> > patching file include/linux/cpu.h
> > patching file kernel/cpu.c
> > patching file kernel/power/Kconfig
> >
> > How come?
>
> Hmm, must have been mangled on the web (downloaded via wget so should be
> byte-by-byte exact). I now downloaded it from akpm-s broken-out tarball
> and this one applied fine.
>
> The patch changes the warning to a different warning, it's now
> kernel/power/Kconfig:79:warning: 'select' used by config symbol 'PM_SLEEP_SMP' refers to undefined symbol 'HOTPLUG_CPU'
>
> The warning also appears when running just "make ARCH=ppc" after
> "make ARCH=ppc oldconfig".
Yes, I have reproduced it now.
Well, it's clearly a false positive, since none of the options PM_SLEEP_SMP
depends on is set in your .config. Also, it seems to be ppc-specific (for
example, if I change the architecture to powerpc, the warning doesn't show up).
The only problem I see here is that the warning in fact should not be printed,
but I don't know how to make the build system stop printing it.
Greetings,
Rafael
--
"Premature optimization is the root of all evil." - Donald Knuth
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [3/3] 2.6.23-rc2: known regressions v2
2007-08-11 21:42 ` Rafael J. Wysocki
@ 2007-08-13 13:21 ` Michal Piotrowski
0 siblings, 0 replies; 35+ messages in thread
From: Michal Piotrowski @ 2007-08-13 13:21 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Sam Ravnborg, Meelis Roos, LKML, Pavel Machek, Andrew Morton,
Linus Torvalds, linux-pm
Hi,
On 11/08/07, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> On Saturday, 11 August 2007 12:53, Meelis Roos wrote:
> > > > > 3. Can you please check if this patch changes anything:
> > > > > http://marc.info/?l=linux-mm-commits&m=118669680811669&w=2
> > > >
> > > > Tried it on current git, kernel/power/Kconfig gave 2 rejects.
> > > > Tried on 2.6.23-rc2, still 2 rejects from the same file, .rej below:
> > >
> > > Sorry, but:
> > >
> > > rafael@albercik:~/src/linux-2.6> git-pull git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
> > > Already up-to-date.
> > > rafael@albercik:~/src/linux-2.6> cat ~/pm-fix-dependencies-of-config_suspend-and-config_hibernation-updated-3x.patch | patch -p1
> > > patching file arch/x86_64/defconfig
> > > patching file include/linux/cpu.h
> > > patching file kernel/cpu.c
> > > patching file kernel/power/Kconfig
> > >
> > > How come?
> >
> > Hmm, must have been mangled on the web (downloaded via wget so should be
> > byte-by-byte exact). I now downloaded it from akpm-s broken-out tarball
> > and this one applied fine.
> >
> > The patch changes the warning to a different warning, it's now
> > kernel/power/Kconfig:79:warning: 'select' used by config symbol 'PM_SLEEP_SMP' refers to undefined symbol 'HOTPLUG_CPU'
> >
> > The warning also appears when running just "make ARCH=ppc" after
> > "make ARCH=ppc oldconfig".
>
> Yes, I have reproduced it now.
>
> Well, it's clearly a false positive, since none of the options PM_SLEEP_SMP
> depends on is set in your .config. Also, it seems to be ppc-specific (for
> example, if I change the architecture to powerpc, the warning doesn't show up).
>
> The only problem I see here is that the warning in fact should not be printed,
> but I don't know how to make the build system stop printing it.
I removed this from KR list. Sam, is it possible to remove this warning?
Regards,
Michal
--
LOG
http://www.stardust.webpages.pl/log/
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [3/3] 2.6.23-rc2: known regressions v2
@ 2007-08-13 13:21 ` Michal Piotrowski
0 siblings, 0 replies; 35+ messages in thread
From: Michal Piotrowski @ 2007-08-13 13:21 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Meelis Roos, Linus Torvalds, Andrew Morton, LKML, linux-pm,
Pavel Machek, Sam Ravnborg
Hi,
On 11/08/07, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> On Saturday, 11 August 2007 12:53, Meelis Roos wrote:
> > > > > 3. Can you please check if this patch changes anything:
> > > > > http://marc.info/?l=linux-mm-commits&m=118669680811669&w=2
> > > >
> > > > Tried it on current git, kernel/power/Kconfig gave 2 rejects.
> > > > Tried on 2.6.23-rc2, still 2 rejects from the same file, .rej below:
> > >
> > > Sorry, but:
> > >
> > > rafael@albercik:~/src/linux-2.6> git-pull git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
> > > Already up-to-date.
> > > rafael@albercik:~/src/linux-2.6> cat ~/pm-fix-dependencies-of-config_suspend-and-config_hibernation-updated-3x.patch | patch -p1
> > > patching file arch/x86_64/defconfig
> > > patching file include/linux/cpu.h
> > > patching file kernel/cpu.c
> > > patching file kernel/power/Kconfig
> > >
> > > How come?
> >
> > Hmm, must have been mangled on the web (downloaded via wget so should be
> > byte-by-byte exact). I now downloaded it from akpm-s broken-out tarball
> > and this one applied fine.
> >
> > The patch changes the warning to a different warning, it's now
> > kernel/power/Kconfig:79:warning: 'select' used by config symbol 'PM_SLEEP_SMP' refers to undefined symbol 'HOTPLUG_CPU'
> >
> > The warning also appears when running just "make ARCH=ppc" after
> > "make ARCH=ppc oldconfig".
>
> Yes, I have reproduced it now.
>
> Well, it's clearly a false positive, since none of the options PM_SLEEP_SMP
> depends on is set in your .config. Also, it seems to be ppc-specific (for
> example, if I change the architecture to powerpc, the warning doesn't show up).
>
> The only problem I see here is that the warning in fact should not be printed,
> but I don't know how to make the build system stop printing it.
I removed this from KR list. Sam, is it possible to remove this warning?
Regards,
Michal
--
LOG
http://www.stardust.webpages.pl/log/
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [3/3] 2.6.23-rc2: known regressions v2
2007-08-13 13:21 ` Michal Piotrowski
(?)
@ 2007-08-13 18:35 ` Sam Ravnborg
-1 siblings, 0 replies; 35+ messages in thread
From: Sam Ravnborg @ 2007-08-13 18:35 UTC (permalink / raw)
To: Michal Piotrowski
Cc: Meelis Roos, LKML, Pavel Machek, Andrew Morton, Linus Torvalds,
linux-pm
On Mon, Aug 13, 2007 at 03:21:54PM +0200, Michal Piotrowski wrote:
> > >
> > > The patch changes the warning to a different warning, it's now
> > > kernel/power/Kconfig:79:warning: 'select' used by config symbol 'PM_SLEEP_SMP' refers to undefined symbol 'HOTPLUG_CPU'
So we have something like this for ppc:
config PM_SLEEP_SMP
bool "bla bla"
select HOTPLUG_CPU
As it is not in my -linus tree it has been added by the referanced patch
in the text I zapped.
The warning is generated _independently_ of the actual configuration.
All it says is that the symbol PM_SLEEP_SMP has a seelct statement
for an unknown symbol - unknown for this architecture at least.
Grepping will reveal that HOTPLUG_CPU is not present for ppc and
the easiet fix here seems to just add it like in the following:
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 6bdeeb7..e7bcd57 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -65,6 +65,10 @@ config GENERIC_BUG
default y
depends on BUG
+config HOTPLUG_CPU
+ bool
+ default n
+
source "init/Kconfig"
menu "Processor"
[cut'n'paste so whitespace damaged...]
This will silence the warning...
Now as PM_SLEEP_SMP requires HOTPLUG_CPU there most be done
something else to prevent this config symbol to be selected
otherwise we would end up with a kernel that has HOTPLUG_CPU
defined even it is not supported.
Sam
^ permalink raw reply related [flat|nested] 35+ messages in thread* Re: [3/3] 2.6.23-rc2: known regressions v2
2007-08-13 13:21 ` Michal Piotrowski
(?)
(?)
@ 2007-08-13 18:35 ` Sam Ravnborg
2007-08-13 20:59 ` Rafael J. Wysocki
2007-08-13 20:59 ` Rafael J. Wysocki
-1 siblings, 2 replies; 35+ messages in thread
From: Sam Ravnborg @ 2007-08-13 18:35 UTC (permalink / raw)
To: Michal Piotrowski
Cc: Rafael J. Wysocki, Meelis Roos, Linus Torvalds, Andrew Morton,
LKML, linux-pm, Pavel Machek
On Mon, Aug 13, 2007 at 03:21:54PM +0200, Michal Piotrowski wrote:
> > >
> > > The patch changes the warning to a different warning, it's now
> > > kernel/power/Kconfig:79:warning: 'select' used by config symbol 'PM_SLEEP_SMP' refers to undefined symbol 'HOTPLUG_CPU'
So we have something like this for ppc:
config PM_SLEEP_SMP
bool "bla bla"
select HOTPLUG_CPU
As it is not in my -linus tree it has been added by the referanced patch
in the text I zapped.
The warning is generated _independently_ of the actual configuration.
All it says is that the symbol PM_SLEEP_SMP has a seelct statement
for an unknown symbol - unknown for this architecture at least.
Grepping will reveal that HOTPLUG_CPU is not present for ppc and
the easiet fix here seems to just add it like in the following:
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 6bdeeb7..e7bcd57 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -65,6 +65,10 @@ config GENERIC_BUG
default y
depends on BUG
+config HOTPLUG_CPU
+ bool
+ default n
+
source "init/Kconfig"
menu "Processor"
[cut'n'paste so whitespace damaged...]
This will silence the warning...
Now as PM_SLEEP_SMP requires HOTPLUG_CPU there most be done
something else to prevent this config symbol to be selected
otherwise we would end up with a kernel that has HOTPLUG_CPU
defined even it is not supported.
Sam
^ permalink raw reply related [flat|nested] 35+ messages in thread* Re: [3/3] 2.6.23-rc2: known regressions v2
2007-08-13 18:35 ` Sam Ravnborg
@ 2007-08-13 20:59 ` Rafael J. Wysocki
2007-08-13 20:59 ` Rafael J. Wysocki
1 sibling, 0 replies; 35+ messages in thread
From: Rafael J. Wysocki @ 2007-08-13 20:59 UTC (permalink / raw)
To: Sam Ravnborg
Cc: Michal Piotrowski, Meelis Roos, LKML, Pavel Machek, linux-pm,
Linus Torvalds, Andrew Morton
On Monday, 13 August 2007 20:35, Sam Ravnborg wrote:
> On Mon, Aug 13, 2007 at 03:21:54PM +0200, Michal Piotrowski wrote:
> > > >
> > > > The patch changes the warning to a different warning, it's now
> > > > kernel/power/Kconfig:79:warning: 'select' used by config symbol 'PM_SLEEP_SMP' refers to undefined symbol 'HOTPLUG_CPU'
>
> So we have something like this for ppc:
>
> config PM_SLEEP_SMP
> bool "bla bla"
Plus a couple of "depends on ..." here, which cannot be true.
> select HOTPLUG_CPU
>
> As it is not in my -linus tree it has been added by the referanced patch
> in the text I zapped.
>
>
> The warning is generated _independently_ of the actual configuration.
> All it says is that the symbol PM_SLEEP_SMP has a seelct statement
> for an unknown symbol - unknown for this architecture at least.
>
> Grepping will reveal that HOTPLUG_CPU is not present for ppc and
> the easiet fix here seems to just add it like in the following:
>
> diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
> index 6bdeeb7..e7bcd57 100644
> --- a/arch/ppc/Kconfig
> +++ b/arch/ppc/Kconfig
> @@ -65,6 +65,10 @@ config GENERIC_BUG
> default y
> depends on BUG
>
> +config HOTPLUG_CPU
> + bool
> + default n
> +
> source "init/Kconfig"
>
> menu "Processor"
>
> [cut'n'paste so whitespace damaged...]
> This will silence the warning...
>
>
> Now as PM_SLEEP_SMP requires HOTPLUG_CPU there most be done
> something else to prevent this config symbol to be selected
> otherwise we would end up with a kernel that has HOTPLUG_CPU
> defined even it is not supported.
Well, the issue at hand is that PM_SLEEP_SMP will never be set on this arch
and the warning is printed nevertheless.
Greetings,
Rafael
--
"Premature optimization is the root of all evil." - Donald Knuth
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [3/3] 2.6.23-rc2: known regressions v2
2007-08-13 18:35 ` Sam Ravnborg
2007-08-13 20:59 ` Rafael J. Wysocki
@ 2007-08-13 20:59 ` Rafael J. Wysocki
2007-08-13 20:56 ` Sam Ravnborg
2007-08-13 20:56 ` Sam Ravnborg
1 sibling, 2 replies; 35+ messages in thread
From: Rafael J. Wysocki @ 2007-08-13 20:59 UTC (permalink / raw)
To: Sam Ravnborg
Cc: Michal Piotrowski, Meelis Roos, Linus Torvalds, Andrew Morton,
LKML, linux-pm, Pavel Machek
On Monday, 13 August 2007 20:35, Sam Ravnborg wrote:
> On Mon, Aug 13, 2007 at 03:21:54PM +0200, Michal Piotrowski wrote:
> > > >
> > > > The patch changes the warning to a different warning, it's now
> > > > kernel/power/Kconfig:79:warning: 'select' used by config symbol 'PM_SLEEP_SMP' refers to undefined symbol 'HOTPLUG_CPU'
>
> So we have something like this for ppc:
>
> config PM_SLEEP_SMP
> bool "bla bla"
Plus a couple of "depends on ..." here, which cannot be true.
> select HOTPLUG_CPU
>
> As it is not in my -linus tree it has been added by the referanced patch
> in the text I zapped.
>
>
> The warning is generated _independently_ of the actual configuration.
> All it says is that the symbol PM_SLEEP_SMP has a seelct statement
> for an unknown symbol - unknown for this architecture at least.
>
> Grepping will reveal that HOTPLUG_CPU is not present for ppc and
> the easiet fix here seems to just add it like in the following:
>
> diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
> index 6bdeeb7..e7bcd57 100644
> --- a/arch/ppc/Kconfig
> +++ b/arch/ppc/Kconfig
> @@ -65,6 +65,10 @@ config GENERIC_BUG
> default y
> depends on BUG
>
> +config HOTPLUG_CPU
> + bool
> + default n
> +
> source "init/Kconfig"
>
> menu "Processor"
>
> [cut'n'paste so whitespace damaged...]
> This will silence the warning...
>
>
> Now as PM_SLEEP_SMP requires HOTPLUG_CPU there most be done
> something else to prevent this config symbol to be selected
> otherwise we would end up with a kernel that has HOTPLUG_CPU
> defined even it is not supported.
Well, the issue at hand is that PM_SLEEP_SMP will never be set on this arch
and the warning is printed nevertheless.
Greetings,
Rafael
--
"Premature optimization is the root of all evil." - Donald Knuth
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [3/3] 2.6.23-rc2: known regressions v2
2007-08-13 20:59 ` Rafael J. Wysocki
@ 2007-08-13 20:56 ` Sam Ravnborg
2007-08-13 20:56 ` Sam Ravnborg
1 sibling, 0 replies; 35+ messages in thread
From: Sam Ravnborg @ 2007-08-13 20:56 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Michal Piotrowski, Meelis Roos, Linus Torvalds, Andrew Morton,
LKML, linux-pm, Pavel Machek
On Mon, Aug 13, 2007 at 10:59:41PM +0200, Rafael J. Wysocki wrote:
> On Monday, 13 August 2007 20:35, Sam Ravnborg wrote:
> > On Mon, Aug 13, 2007 at 03:21:54PM +0200, Michal Piotrowski wrote:
> > > > >
> > > > > The patch changes the warning to a different warning, it's now
> > > > > kernel/power/Kconfig:79:warning: 'select' used by config symbol 'PM_SLEEP_SMP' refers to undefined symbol 'HOTPLUG_CPU'
> >
> > So we have something like this for ppc:
> >
> > config PM_SLEEP_SMP
> > bool "bla bla"
>
> Plus a couple of "depends on ..." here, which cannot be true.
>
> > select HOTPLUG_CPU
> >
> > As it is not in my -linus tree it has been added by the referanced patch
> > in the text I zapped.
> >
> >
> > The warning is generated _independently_ of the actual configuration.
> > All it says is that the symbol PM_SLEEP_SMP has a seelct statement
> > for an unknown symbol - unknown for this architecture at least.
> >
> > Grepping will reveal that HOTPLUG_CPU is not present for ppc and
> > the easiet fix here seems to just add it like in the following:
> >
> > diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
> > index 6bdeeb7..e7bcd57 100644
> > --- a/arch/ppc/Kconfig
> > +++ b/arch/ppc/Kconfig
> > @@ -65,6 +65,10 @@ config GENERIC_BUG
> > default y
> > depends on BUG
> >
> > +config HOTPLUG_CPU
> > + bool
> > + default n
> > +
> > source "init/Kconfig"
> >
> > menu "Processor"
> >
> > [cut'n'paste so whitespace damaged...]
> > This will silence the warning...
> >
> >
> > Now as PM_SLEEP_SMP requires HOTPLUG_CPU there most be done
> > something else to prevent this config symbol to be selected
> > otherwise we would end up with a kernel that has HOTPLUG_CPU
> > defined even it is not supported.
>
> Well, the issue at hand is that PM_SLEEP_SMP will never be set on this arch
> and the warning is printed nevertheless.
Yep - because the warnign is correct.
The symbol PM_NEED_SMP refer to an undefined symbol
no matter the case that PM_NEED_SMP can be set or not.
So either provide the symbol or drop the select. It is as simple as that.
Sam
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [3/3] 2.6.23-rc2: known regressions v2
2007-08-13 20:59 ` Rafael J. Wysocki
2007-08-13 20:56 ` Sam Ravnborg
@ 2007-08-13 20:56 ` Sam Ravnborg
1 sibling, 0 replies; 35+ messages in thread
From: Sam Ravnborg @ 2007-08-13 20:56 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Michal Piotrowski, Meelis Roos, LKML, Pavel Machek, linux-pm,
Linus Torvalds, Andrew Morton
On Mon, Aug 13, 2007 at 10:59:41PM +0200, Rafael J. Wysocki wrote:
> On Monday, 13 August 2007 20:35, Sam Ravnborg wrote:
> > On Mon, Aug 13, 2007 at 03:21:54PM +0200, Michal Piotrowski wrote:
> > > > >
> > > > > The patch changes the warning to a different warning, it's now
> > > > > kernel/power/Kconfig:79:warning: 'select' used by config symbol 'PM_SLEEP_SMP' refers to undefined symbol 'HOTPLUG_CPU'
> >
> > So we have something like this for ppc:
> >
> > config PM_SLEEP_SMP
> > bool "bla bla"
>
> Plus a couple of "depends on ..." here, which cannot be true.
>
> > select HOTPLUG_CPU
> >
> > As it is not in my -linus tree it has been added by the referanced patch
> > in the text I zapped.
> >
> >
> > The warning is generated _independently_ of the actual configuration.
> > All it says is that the symbol PM_SLEEP_SMP has a seelct statement
> > for an unknown symbol - unknown for this architecture at least.
> >
> > Grepping will reveal that HOTPLUG_CPU is not present for ppc and
> > the easiet fix here seems to just add it like in the following:
> >
> > diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
> > index 6bdeeb7..e7bcd57 100644
> > --- a/arch/ppc/Kconfig
> > +++ b/arch/ppc/Kconfig
> > @@ -65,6 +65,10 @@ config GENERIC_BUG
> > default y
> > depends on BUG
> >
> > +config HOTPLUG_CPU
> > + bool
> > + default n
> > +
> > source "init/Kconfig"
> >
> > menu "Processor"
> >
> > [cut'n'paste so whitespace damaged...]
> > This will silence the warning...
> >
> >
> > Now as PM_SLEEP_SMP requires HOTPLUG_CPU there most be done
> > something else to prevent this config symbol to be selected
> > otherwise we would end up with a kernel that has HOTPLUG_CPU
> > defined even it is not supported.
>
> Well, the issue at hand is that PM_SLEEP_SMP will never be set on this arch
> and the warning is printed nevertheless.
Yep - because the warnign is correct.
The symbol PM_NEED_SMP refer to an undefined symbol
no matter the case that PM_NEED_SMP can be set or not.
So either provide the symbol or drop the select. It is as simple as that.
Sam
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [3/3] 2.6.23-rc2: known regressions v2
2007-08-10 20:06 ` Rafael J. Wysocki
2007-08-11 10:53 ` Meelis Roos
@ 2007-08-11 10:53 ` Meelis Roos
1 sibling, 0 replies; 35+ messages in thread
From: Meelis Roos @ 2007-08-11 10:53 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Michal Piotrowski, LKML, Pavel Machek, Andrew Morton,
Linus Torvalds, linux-pm
> > > 3. Can you please check if this patch changes anything:
> > > http://marc.info/?l=linux-mm-commits&m=118669680811669&w=2
> >
> > Tried it on current git, kernel/power/Kconfig gave 2 rejects.
> > Tried on 2.6.23-rc2, still 2 rejects from the same file, .rej below:
>
> Sorry, but:
>
> rafael@albercik:~/src/linux-2.6> git-pull git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
> Already up-to-date.
> rafael@albercik:~/src/linux-2.6> cat ~/pm-fix-dependencies-of-config_suspend-and-config_hibernation-updated-3x.patch | patch -p1
> patching file arch/x86_64/defconfig
> patching file include/linux/cpu.h
> patching file kernel/cpu.c
> patching file kernel/power/Kconfig
>
> How come?
Hmm, must have been mangled on the web (downloaded via wget so should be
byte-by-byte exact). I now downloaded it from akpm-s broken-out tarball
and this one applied fine.
The patch changes the warning to a different warning, it's now
kernel/power/Kconfig:79:warning: 'select' used by config symbol 'PM_SLEEP_SMP' refers to undefined symbol 'HOTPLUG_CPU'
The warning also appears when running just "make ARCH=ppc" after
"make ARCH=ppc oldconfig".
--
Meelis Roos (mroos@linux.ee)
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [3/3] 2.6.23-rc2: known regressions v2
2007-08-10 19:29 ` Meelis Roos
2007-08-10 20:06 ` Rafael J. Wysocki
@ 2007-08-10 20:06 ` Rafael J. Wysocki
2007-08-10 20:16 ` Rafael J. Wysocki
2007-08-10 20:16 ` Rafael J. Wysocki
3 siblings, 0 replies; 35+ messages in thread
From: Rafael J. Wysocki @ 2007-08-10 20:06 UTC (permalink / raw)
To: Meelis Roos
Cc: Michal Piotrowski, LKML, Pavel Machek, Andrew Morton,
Linus Torvalds, linux-pm
On Friday, 10 August 2007 21:29, Meelis Roos wrote:
> > 1. Is that with the same .config you sent me previously?
>
> Yes, just ran it through make oldconfig again, included below.
>
> > 2. What exactly is the consequence of this warning?
>
> I hope no big trouble (i.e. only a warning during make *config) but I
> haven't boot-tested rc2 and newer kernels yet because it's a remote
> machine. Will try some day now.
>
> > 3. Can you please check if this patch changes anything:
> > http://marc.info/?l=linux-mm-commits&m=118669680811669&w=2
>
> Tried it on current git, kernel/power/Kconfig gave 2 rejects.
> Tried on 2.6.23-rc2, still 2 rejects from the same file, .rej below:
Sorry, but:
rafael@albercik:~/src/linux-2.6> git-pull git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
Already up-to-date.
rafael@albercik:~/src/linux-2.6> cat ~/pm-fix-dependencies-of-config_suspend-and-config_hibernation-updated-3x.patch | patch -p1
patching file arch/x86_64/defconfig
patching file include/linux/cpu.h
patching file kernel/cpu.c
patching file kernel/power/Kconfig
How come?
Greetings,
Rafael
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [3/3] 2.6.23-rc2: known regressions v2
2007-08-10 19:29 ` Meelis Roos
2007-08-10 20:06 ` Rafael J. Wysocki
2007-08-10 20:06 ` Rafael J. Wysocki
@ 2007-08-10 20:16 ` Rafael J. Wysocki
2007-08-10 20:16 ` Rafael J. Wysocki
3 siblings, 0 replies; 35+ messages in thread
From: Rafael J. Wysocki @ 2007-08-10 20:16 UTC (permalink / raw)
To: Meelis Roos
Cc: Michal Piotrowski, LKML, Pavel Machek, Andrew Morton,
Linus Torvalds, linux-pm
On Friday, 10 August 2007 21:29, Meelis Roos wrote:
> > 1. Is that with the same .config you sent me previously?
>
> Yes, just ran it through make oldconfig again, included below.
>
> > 2. What exactly is the consequence of this warning?
>
> I hope no big trouble (i.e. only a warning during make *config) but I
> haven't boot-tested rc2 and newer kernels yet because it's a remote
> machine. Will try some day now.
What happens if you run "make" with the config created with the
"make oldconfig"? Does the warning show up again or not?
Greetings,
Rafael
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [3/3] 2.6.23-rc2: known regressions v2
2007-08-10 19:29 ` Meelis Roos
` (2 preceding siblings ...)
2007-08-10 20:16 ` Rafael J. Wysocki
@ 2007-08-10 20:16 ` Rafael J. Wysocki
3 siblings, 0 replies; 35+ messages in thread
From: Rafael J. Wysocki @ 2007-08-10 20:16 UTC (permalink / raw)
To: Meelis Roos
Cc: Michal Piotrowski, Linus Torvalds, Andrew Morton, LKML, linux-pm,
Pavel Machek
On Friday, 10 August 2007 21:29, Meelis Roos wrote:
> > 1. Is that with the same .config you sent me previously?
>
> Yes, just ran it through make oldconfig again, included below.
>
> > 2. What exactly is the consequence of this warning?
>
> I hope no big trouble (i.e. only a warning during make *config) but I
> haven't boot-tested rc2 and newer kernels yet because it's a remote
> machine. Will try some day now.
What happens if you run "make" with the config created with the
"make oldconfig"? Does the warning show up again or not?
Greetings,
Rafael
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [3/3] 2.6.23-rc2: known regressions v2
2007-08-10 19:03 ` Meelis Roos
2007-08-10 19:24 ` Rafael J. Wysocki
@ 2007-08-10 19:24 ` Rafael J. Wysocki
1 sibling, 0 replies; 35+ messages in thread
From: Rafael J. Wysocki @ 2007-08-10 19:24 UTC (permalink / raw)
To: Meelis Roos
Cc: Michal Piotrowski, LKML, Pavel Machek, Andrew Morton,
Linus Torvalds, linux-pm
On Friday, 10 August 2007 21:03, Meelis Roos wrote:
> > > Power management
> > >
> > > Subject : Kconfig: 'SUSPEND_SMP' refers to undefined symbol 'HOTPLUG_CPU'
> > > References : http://lkml.org/lkml/2007/8/4/39
> > > Last known good : ?
> > > Submitter : Meelis Roos <mroos@linux.ee>
> > > Caused-By : ?
> > > Handled-By : Rafael J. Wysocki <rjw@sisk.pl>
> > > Status : unknown
> >
> > I can't reproduce this with my cross compilation toolchain for PPC.
>
> Still present with todays git and make oldconfig, on native powerpc with
> Debian unstable.
1. Is that with the same .config you sent me previously?
2. What exactly is the consequence of this warning?
3. Can you please check if this patch changes anything:
http://marc.info/?l=linux-mm-commits&m=118669680811669&w=2
Greetings,
Rafael
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [3/3] 2.6.23-rc2: known regressions v2
2007-08-08 20:10 ` Rafael J. Wysocki
2007-08-10 19:03 ` Meelis Roos
@ 2007-08-10 19:03 ` Meelis Roos
1 sibling, 0 replies; 35+ messages in thread
From: Meelis Roos @ 2007-08-10 19:03 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Michal Piotrowski, LKML, Pavel Machek, Andrew Morton,
Linus Torvalds, linux-pm
> > Power management
> >
> > Subject : Kconfig: 'SUSPEND_SMP' refers to undefined symbol 'HOTPLUG_CPU'
> > References : http://lkml.org/lkml/2007/8/4/39
> > Last known good : ?
> > Submitter : Meelis Roos <mroos@linux.ee>
> > Caused-By : ?
> > Handled-By : Rafael J. Wysocki <rjw@sisk.pl>
> > Status : unknown
>
> I can't reproduce this with my cross compilation toolchain for PPC.
Still present with todays git and make oldconfig, on native powerpc with
Debian unstable.
--
Meelis Roos (mroos@linux.ee)
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [3/3] 2.6.23-rc2: known regressions v2
2007-08-08 17:12 ` [3/3] " Michal Piotrowski
` (2 preceding siblings ...)
2007-08-08 20:10 ` Rafael J. Wysocki
@ 2007-08-08 20:10 ` Rafael J. Wysocki
3 siblings, 0 replies; 35+ messages in thread
From: Rafael J. Wysocki @ 2007-08-08 20:10 UTC (permalink / raw)
To: Michal Piotrowski
Cc: Meelis Roos, LKML, Pavel Machek, Andrew Morton, Linus Torvalds,
linux-pm
On Wednesday, 8 August 2007 19:12, Michal Piotrowski wrote:
> Hi all,
>
> Here is a list of some known regressions in 2.6.23-rc2.
>
> Feel free to add new regressions/remove fixed etc.
> http://kernelnewbies.org/known_regressions
>
> List of Aces
>
> Name Regressions fixed since 21-Jun-2007
> Adrian Bunk 6
> Andi Kleen 4
> Andrew Morton 4
> Linus Torvalds 4
> Al Viro 3
> Cornelia Huck 3
> Jens Axboe 3
> Tejun Heo 3
> David Woodhouse 2
> Hugh Dickins 2
> Peter Zijlstra 2
> Trent Piepho 2
>
>
>
> Power management
>
> Subject : Kconfig: 'SUSPEND_SMP' refers to undefined symbol 'HOTPLUG_CPU'
> References : http://lkml.org/lkml/2007/8/4/39
> Last known good : ?
> Submitter : Meelis Roos <mroos@linux.ee>
> Caused-By : ?
> Handled-By : Rafael J. Wysocki <rjw@sisk.pl>
> Status : unknown
I can't reproduce this with my cross compilation toolchain for PPC.
Greetings,
Rafael
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [3/3] 2.6.23-rc2: known regressions v2
[not found] <46B9F664.9060600@googlemail.com>
` (5 preceding siblings ...)
2007-08-08 17:12 ` [3/3] " Michal Piotrowski
@ 2007-08-08 17:12 ` Michal Piotrowski
6 siblings, 0 replies; 35+ messages in thread
From: Michal Piotrowski @ 2007-08-08 17:12 UTC (permalink / raw)
To: Linus Torvalds
Cc: Zhang Yanmin, linux-usb-devel, linux-scsi, Mark Hindley,
Meelis Roos, Greg KH, Tino Keitel, LKML, Oliver Falk,
Pavel Machek, Andrew Vasquez, Ivan Kokshaysky, Andrew Morton,
linux-pm, Richard Henderson
Hi all,
Here is a list of some known regressions in 2.6.23-rc2.
Feel free to add new regressions/remove fixed etc.
http://kernelnewbies.org/known_regressions
List of Aces
Name Regressions fixed since 21-Jun-2007
Adrian Bunk 6
Andi Kleen 4
Andrew Morton 4
Linus Torvalds 4
Al Viro 3
Cornelia Huck 3
Jens Axboe 3
Tejun Heo 3
David Woodhouse 2
Hugh Dickins 2
Peter Zijlstra 2
Trent Piepho 2
Power management
Subject : Kconfig: 'SUSPEND_SMP' refers to undefined symbol 'HOTPLUG_CPU'
References : http://lkml.org/lkml/2007/8/4/39
Last known good : ?
Submitter : Meelis Roos <mroos@linux.ee>
Caused-By : ?
Handled-By : Rafael J. Wysocki <rjw@sisk.pl>
Status : unknown
SCSI
Subject : unable to handle kernel NULL pointer dereference in qla2x00_read_nvram_data
References : http://lkml.org/lkml/2007/8/6/506
Last known good : ?
Submitter : Zhang, Yanmin <yanmin_zhang@linux.intel.com>
Caused-By : ?
Handled-By : ?
Status : unknown
USB
Subject : 2.6.23-rc1: uhci_hcd. irq 4: nobody cared
References : http://lkml.org/lkml/2007/7/29/75
Last known good : ?
Submitter : Mark Hindley <mark@hindley.org.uk>
Caused-By : ?
Handled-By : Alan Stern <stern@rowland.harvard.edu>
Status : unknown
Subject : 2.6.23-rc1: USB hard disk broken
References : http://lkml.org/lkml/2007/7/25/62
Last known good : ?
Submitter : Tino Keitel <tino.keitel@gmx.de>
Caused-By : ?
Handled-By : Oliver Neukum <oliver@neukum.org>
Status : unknown
Alpha
Subject : -Werror compilation problem - make[1]: *** [arch/alpha/kernel/sys_titan.o] Error 1
References : http://lkml.org/lkml/2007/8/6/137
Last known good : ?
Submitter : Oliver Falk <oliver@linux-kernel.at>
Caused-By : ?
Handled-By : ?
Status : unknown
Regards,
Michal
--
LOG
http://www.stardust.webpages.pl/log/
^ permalink raw reply [flat|nested] 35+ messages in thread