* sata_promise: Warning/Errors with SATA300 TX4 and SAMSUNG HD501LJ
@ 2007-08-09 21:19 Sebastian Witt
0 siblings, 0 replies; only message in thread
From: Sebastian Witt @ 2007-08-09 21:19 UTC (permalink / raw)
To: jgarzik; +Cc: linux-ide
Hello,
I'm using a Promise SATA300 TX4 with SAMSUNG HD501LJ harddisks on kernel 2.6.21.
On high disk load sometimes warning/error messages are printed out:
...
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: cmd c8/00:08:8f:7f:85/00:00:00:00:00/ef tag 0 cdb 0x0 data 4096 in
res 50/00:00:96:7f:85/00:00:11:00:00/ef Emask 0x1 (device error)
ata4.00: configured for UDMA/133
ata4: EH complete
...
They are not happening very often (three in the last few days) and also
no other problems occured (filesystem/data ok).
dmesg:
...
scsi0 : sata_promise
ata1: SATA link down (SStatus 0 SControl 300)
scsi1 : sata_promise
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
scsi2 : sata_promise
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi3 : sata_promise
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sd 1:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sda: sda1
sd 1:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: Attached scsi generic sg0 type 0
scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg1 type 0
scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sd 3:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sdc: sdc1
sd 3:0:0:0: [sdc] Attached SCSI disk
sd 3:0:0:0: Attached scsi generic sg2 type 0
....
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: cmd 25/00:28:d7:51:a5/00:00:11:00:00/e0 tag 0 cdb 0x0 data 20480 in
res 50/00:00:fe:51:a5/00:00:11:00:00/e0 Emask 0x1 (device error)
ata4.00: configured for UDMA/133
ata4: EH complete
sd 3:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: cmd c8/00:08:8f:7f:85/00:00:00:00:00/ef tag 0 cdb 0x0 data 4096 in
res 50/00:00:96:7f:85/00:00:11:00:00/ef Emask 0x1 (device error)
ata4.00: configured for UDMA/133
ata4: EH complete
sd 3:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: cmd 25/00:80:2f:fd:c2/00:00:1a:00:00/e0 tag 0 cdb 0x0 data 65536 in
res 50/00:00:ae:fd:c2/00:00:1a:00:00/e0 Emask 0x1 (device error)
ata3.00: configured for UDMA/133
ata3: EH complete
sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
Some ideas? Not optimal/not good/bad/very bad?
Regards,
Sebastian
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-08-09 21:19 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-08-09 21:19 sata_promise: Warning/Errors with SATA300 TX4 and SAMSUNG HD501LJ Sebastian Witt
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.