All of lore.kernel.org
 help / color / mirror / Atom feed
* [patch 07/18] PCI-X/PCI-Express read control interfaces: use them in e1000
@ 2007-08-10 21:05 akpm
  2007-08-14 20:41 ` Kok, Auke
  0 siblings, 1 reply; 2+ messages in thread
From: akpm @ 2007-08-10 21:05 UTC (permalink / raw)
  To: jeff; +Cc: netdev, akpm, peter.oruba, auke-jan.h.kok, shemminger

From: "Peter Oruba" <peter.oruba@amd.com>

These driver changes incorporate the proposed PCI-X / PCI-Express read byte
count interface.  Reading and setting those valuse doesn't take place
"manually", instead wrapping functions are called to allow quirks for some
PCI bridges.

Signed-off by: Peter Oruba <peter.oruba@amd.com>
Based on work by Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Auke Kok <auke-jan.h.kok@intel.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---

 drivers/net/e1000/e1000_hw.c   |   25 +++----------------------
 drivers/net/e1000/e1000_hw.h   |    2 ++
 drivers/net/e1000/e1000_main.c |   14 ++++++++++++++
 3 files changed, 19 insertions(+), 22 deletions(-)

diff -puN drivers/net/e1000/e1000_hw.c~pci-x-pci-express-read-control-interfaces-e1000 drivers/net/e1000/e1000_hw.c
--- a/drivers/net/e1000/e1000_hw.c~pci-x-pci-express-read-control-interfaces-e1000
+++ a/drivers/net/e1000/e1000_hw.c
@@ -865,10 +865,6 @@ e1000_init_hw(struct e1000_hw *hw)
     uint32_t ctrl;
     uint32_t i;
     int32_t ret_val;
-    uint16_t pcix_cmd_word;
-    uint16_t pcix_stat_hi_word;
-    uint16_t cmd_mmrbc;
-    uint16_t stat_mmrbc;
     uint32_t mta_size;
     uint32_t reg_data;
     uint32_t ctrl_ext;
@@ -958,24 +954,9 @@ e1000_init_hw(struct e1000_hw *hw)
         break;
     default:
         /* Workaround for PCI-X problem when BIOS sets MMRBC incorrectly. */
-        if (hw->bus_type == e1000_bus_type_pcix) {
-            e1000_read_pci_cfg(hw, PCIX_COMMAND_REGISTER, &pcix_cmd_word);
-            e1000_read_pci_cfg(hw, PCIX_STATUS_REGISTER_HI,
-                &pcix_stat_hi_word);
-            cmd_mmrbc = (pcix_cmd_word & PCIX_COMMAND_MMRBC_MASK) >>
-                PCIX_COMMAND_MMRBC_SHIFT;
-            stat_mmrbc = (pcix_stat_hi_word & PCIX_STATUS_HI_MMRBC_MASK) >>
-                PCIX_STATUS_HI_MMRBC_SHIFT;
-            if (stat_mmrbc == PCIX_STATUS_HI_MMRBC_4K)
-                stat_mmrbc = PCIX_STATUS_HI_MMRBC_2K;
-            if (cmd_mmrbc > stat_mmrbc) {
-                pcix_cmd_word &= ~PCIX_COMMAND_MMRBC_MASK;
-                pcix_cmd_word |= stat_mmrbc << PCIX_COMMAND_MMRBC_SHIFT;
-                e1000_write_pci_cfg(hw, PCIX_COMMAND_REGISTER,
-                    &pcix_cmd_word);
-            }
-        }
-        break;
+	if (hw->bus_type == e1000_bus_type_pcix && e1000_pcix_get_mmrbc(hw) > 2048)
+		e1000_pcix_set_mmrbc(hw, 2048);
+	break;
     }
 
     /* More time needed for PHY to initialize */
diff -puN drivers/net/e1000/e1000_hw.h~pci-x-pci-express-read-control-interfaces-e1000 drivers/net/e1000/e1000_hw.h
--- a/drivers/net/e1000/e1000_hw.h~pci-x-pci-express-read-control-interfaces-e1000
+++ a/drivers/net/e1000/e1000_hw.h
@@ -424,6 +424,8 @@ void e1000_pci_clear_mwi(struct e1000_hw
 void e1000_read_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t * value);
 void e1000_write_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t * value);
 int32_t e1000_read_pcie_cap_reg(struct e1000_hw *hw, uint32_t reg, uint16_t *value);
+void e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc);
+int e1000_pcix_get_mmrbc(struct e1000_hw *hw);
 /* Port I/O is only supported on 82544 and newer */
 void e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value);
 int32_t e1000_disable_pciex_master(struct e1000_hw *hw);
diff -puN drivers/net/e1000/e1000_main.c~pci-x-pci-express-read-control-interfaces-e1000 drivers/net/e1000/e1000_main.c
--- a/drivers/net/e1000/e1000_main.c~pci-x-pci-express-read-control-interfaces-e1000
+++ a/drivers/net/e1000/e1000_main.c
@@ -4906,6 +4906,20 @@ e1000_write_pci_cfg(struct e1000_hw *hw,
 	pci_write_config_word(adapter->pdev, reg, *value);
 }
 
+int
+e1000_pcix_get_mmrbc(struct e1000_hw *hw)
+{
+	struct e1000_adapter *adapter = hw->back;
+	return pcix_get_mmrbc(adapter->pdev);
+}
+
+void
+e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc)
+{
+	struct e1000_adapter *adapter = hw->back;
+	pcix_set_mmrbc(adapter->pdev, mmrbc);
+}
+
 int32_t
 e1000_read_pcie_cap_reg(struct e1000_hw *hw, uint32_t reg, uint16_t *value)
 {
_

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [patch 07/18] PCI-X/PCI-Express read control interfaces: use them in e1000
  2007-08-10 21:05 [patch 07/18] PCI-X/PCI-Express read control interfaces: use them in e1000 akpm
@ 2007-08-14 20:41 ` Kok, Auke
  0 siblings, 0 replies; 2+ messages in thread
From: Kok, Auke @ 2007-08-14 20:41 UTC (permalink / raw)
  To: jeff; +Cc: akpm, netdev, peter.oruba, shemminger

akpm@linux-foundation.org wrote:
> From: "Peter Oruba" <peter.oruba@amd.com>
> 
> These driver changes incorporate the proposed PCI-X / PCI-Express read byte
> count interface.  Reading and setting those valuse doesn't take place
> "manually", instead wrapping functions are called to allow quirks for some
> PCI bridges.
> 
> Signed-off by: Peter Oruba <peter.oruba@amd.com>
> Based on work by Stephen Hemminger <shemminger@linux-foundation.org>
> Cc: Auke Kok <auke-jan.h.kok@intel.com>
> Cc: Jeff Garzik <jeff@garzik.org>
> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
> ---
> 
>  drivers/net/e1000/e1000_hw.c   |   25 +++----------------------
>  drivers/net/e1000/e1000_hw.h   |    2 ++
>  drivers/net/e1000/e1000_main.c |   14 ++++++++++++++
>  3 files changed, 19 insertions(+), 22 deletions(-)
> 
> diff -puN drivers/net/e1000/e1000_hw.c~pci-x-pci-express-read-control-interfaces-e1000 drivers/net/e1000/e1000_hw.c
> --- a/drivers/net/e1000/e1000_hw.c~pci-x-pci-express-read-control-interfaces-e1000
> +++ a/drivers/net/e1000/e1000_hw.c
> @@ -865,10 +865,6 @@ e1000_init_hw(struct e1000_hw *hw)
>      uint32_t ctrl;
>      uint32_t i;
>      int32_t ret_val;
> -    uint16_t pcix_cmd_word;
> -    uint16_t pcix_stat_hi_word;
> -    uint16_t cmd_mmrbc;
> -    uint16_t stat_mmrbc;
>      uint32_t mta_size;
>      uint32_t reg_data;
>      uint32_t ctrl_ext;
> @@ -958,24 +954,9 @@ e1000_init_hw(struct e1000_hw *hw)
>          break;
>      default:
>          /* Workaround for PCI-X problem when BIOS sets MMRBC incorrectly. */
> -        if (hw->bus_type == e1000_bus_type_pcix) {
> -            e1000_read_pci_cfg(hw, PCIX_COMMAND_REGISTER, &pcix_cmd_word);
> -            e1000_read_pci_cfg(hw, PCIX_STATUS_REGISTER_HI,
> -                &pcix_stat_hi_word);
> -            cmd_mmrbc = (pcix_cmd_word & PCIX_COMMAND_MMRBC_MASK) >>
> -                PCIX_COMMAND_MMRBC_SHIFT;
> -            stat_mmrbc = (pcix_stat_hi_word & PCIX_STATUS_HI_MMRBC_MASK) >>
> -                PCIX_STATUS_HI_MMRBC_SHIFT;
> -            if (stat_mmrbc == PCIX_STATUS_HI_MMRBC_4K)
> -                stat_mmrbc = PCIX_STATUS_HI_MMRBC_2K;
> -            if (cmd_mmrbc > stat_mmrbc) {
> -                pcix_cmd_word &= ~PCIX_COMMAND_MMRBC_MASK;
> -                pcix_cmd_word |= stat_mmrbc << PCIX_COMMAND_MMRBC_SHIFT;
> -                e1000_write_pci_cfg(hw, PCIX_COMMAND_REGISTER,
> -                    &pcix_cmd_word);
> -            }
> -        }
> -        break;
> +	if (hw->bus_type == e1000_bus_type_pcix && e1000_pcix_get_mmrbc(hw) > 2048)
> +		e1000_pcix_set_mmrbc(hw, 2048);
> +	break;
>      }
>  
>      /* More time needed for PHY to initialize */
> diff -puN drivers/net/e1000/e1000_hw.h~pci-x-pci-express-read-control-interfaces-e1000 drivers/net/e1000/e1000_hw.h
> --- a/drivers/net/e1000/e1000_hw.h~pci-x-pci-express-read-control-interfaces-e1000
> +++ a/drivers/net/e1000/e1000_hw.h
> @@ -424,6 +424,8 @@ void e1000_pci_clear_mwi(struct e1000_hw
>  void e1000_read_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t * value);
>  void e1000_write_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t * value);
>  int32_t e1000_read_pcie_cap_reg(struct e1000_hw *hw, uint32_t reg, uint16_t *value);
> +void e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc);
> +int e1000_pcix_get_mmrbc(struct e1000_hw *hw);
>  /* Port I/O is only supported on 82544 and newer */
>  void e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value);
>  int32_t e1000_disable_pciex_master(struct e1000_hw *hw);
> diff -puN drivers/net/e1000/e1000_main.c~pci-x-pci-express-read-control-interfaces-e1000 drivers/net/e1000/e1000_main.c
> --- a/drivers/net/e1000/e1000_main.c~pci-x-pci-express-read-control-interfaces-e1000
> +++ a/drivers/net/e1000/e1000_main.c
> @@ -4906,6 +4906,20 @@ e1000_write_pci_cfg(struct e1000_hw *hw,
>  	pci_write_config_word(adapter->pdev, reg, *value);
>  }
>  
> +int
> +e1000_pcix_get_mmrbc(struct e1000_hw *hw)
> +{
> +	struct e1000_adapter *adapter = hw->back;
> +	return pcix_get_mmrbc(adapter->pdev);
> +}
> +
> +void
> +e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc)
> +{
> +	struct e1000_adapter *adapter = hw->back;
> +	pcix_set_mmrbc(adapter->pdev, mmrbc);
> +}
> +
>  int32_t
>  e1000_read_pcie_cap_reg(struct e1000_hw *hw, uint32_t reg, uint16_t *value)
>  {
> _


Jeff,

This has been sitting in -mm long enough I think. Please merge in upstream.

Acked-by: Auke Kok <auke-jan.h.kok@intel.com>

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2007-08-14 20:42 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-08-10 21:05 [patch 07/18] PCI-X/PCI-Express read control interfaces: use them in e1000 akpm
2007-08-14 20:41 ` Kok, Auke

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.