All of lore.kernel.org
 help / color / mirror / Atom feed
From: Patrizio Bassi <patrizio.bassi@gmail.com>
Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>,
	"Kernel," <linux-kernel@vger.kernel.org>,
	IDE/ATA development list <linux-ide@vger.kernel.org>,
	Alan Cox <alan@redhat.com>,
	Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: Re: libata not working for sis5533
Date: Sat, 01 Sep 2007 00:20:25 +0200	[thread overview]
Message-ID: <46D89429.7080802@gmail.com> (raw)
In-Reply-To: <46D8921E.3010304@gmail.com>

Patrizio Bassi ha scritto:
> Michal Piotrowski ha scritto:
>> Hi,
>>
>> [Adding IDE wizards to CC]
>>
>> On 26/08/07, Patrizio Bassi <patrizio.bassi@gmail.com> wrote:
>>   
>>> My sis630 chipset shipped with Asus A1000
>>> doesn't work properly with suspend with ide drivers
>>> (http://bugzilla.kernel.org/show_bug.cgi?id=7077)
>>>
>>> i tried to switch to libata but i cannot boot.
>>> I've enabled generic ide and sis specific code, both in-kernel. of
>>> course scsi too.
>>>
>>> when i boot i get: irq #14 nobody cared and stop
>>>
>>> i have to remove battery to reboot pc.
>>> I'm using 2.6.22.5, but i never got any libata kernel working.
>>>
>>> Patrizio
>>>
>>> ps. i'm writing from my desktop as i'm doing hardware mainteinance on
>>> the laptop and could not boot it
>>>
>>> Please CC me.
>>>
>>> lspci:
>>> 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 11)
>>> 00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
>>> 00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC
>>> Bridge)
>>> 00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900
>>> PCI Fast Ethernet (rev 80)
>>> 00:01.2 USB Controller: Silicon Integrated Systems [SiS] USB  1.0
>>> Controller (rev 07)
>>> 00:01.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
>>> Controller (rev 07)
>>> 00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS]
>>> SiS PCI Audio Accelerator (rev 01)
>>>  00:01.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem
>>> Controller (rev a0)
>>> 00:02.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual
>>> PCI-to-PCI bridge (AGP)
>>> 00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
>>> 00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
>>> 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]
>>> 630/730 PCI/AGP VGA Display Adapter (rev 11)
>>>     
>>
>> Regards,
>> Michal
>>
>>   
>
>
i've been out for a week, but found no notice, did i lost any email or
no activity on this issue?

Patrizio


WARNING: multiple messages have this Message-ID (diff)
From: Patrizio Bassi <patrizio.bassi@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>,
	"Kernel," <linux-kernel@vger.kernel.org>,
	IDE/ATA development list <linux-ide@vger.kernel.org>,
	Alan Cox <alan@redhat.com>,
	Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: Re: libata not working for sis5533
Date: Sat, 01 Sep 2007 00:20:25 +0200	[thread overview]
Message-ID: <46D89429.7080802@gmail.com> (raw)
In-Reply-To: <46D8921E.3010304@gmail.com>

Patrizio Bassi ha scritto:
> Michal Piotrowski ha scritto:
>> Hi,
>>
>> [Adding IDE wizards to CC]
>>
>> On 26/08/07, Patrizio Bassi <patrizio.bassi@gmail.com> wrote:
>>   
>>> My sis630 chipset shipped with Asus A1000
>>> doesn't work properly with suspend with ide drivers
>>> (http://bugzilla.kernel.org/show_bug.cgi?id=7077)
>>>
>>> i tried to switch to libata but i cannot boot.
>>> I've enabled generic ide and sis specific code, both in-kernel. of
>>> course scsi too.
>>>
>>> when i boot i get: irq #14 nobody cared and stop
>>>
>>> i have to remove battery to reboot pc.
>>> I'm using 2.6.22.5, but i never got any libata kernel working.
>>>
>>> Patrizio
>>>
>>> ps. i'm writing from my desktop as i'm doing hardware mainteinance on
>>> the laptop and could not boot it
>>>
>>> Please CC me.
>>>
>>> lspci:
>>> 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 11)
>>> 00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
>>> 00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC
>>> Bridge)
>>> 00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900
>>> PCI Fast Ethernet (rev 80)
>>> 00:01.2 USB Controller: Silicon Integrated Systems [SiS] USB  1.0
>>> Controller (rev 07)
>>> 00:01.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
>>> Controller (rev 07)
>>> 00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS]
>>> SiS PCI Audio Accelerator (rev 01)
>>>  00:01.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem
>>> Controller (rev a0)
>>> 00:02.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual
>>> PCI-to-PCI bridge (AGP)
>>> 00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
>>> 00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
>>> 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]
>>> 630/730 PCI/AGP VGA Display Adapter (rev 11)
>>>     
>>
>> Regards,
>> Michal
>>
>>   
>
>
i've been out for a week, but found no notice, did i lost any email or
no activity on this issue?

Patrizio


  parent reply	other threads:[~2007-08-31 22:20 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-08-26  7:59 libata not working for sis5533 Patrizio Bassi
2007-08-26 23:27 ` Michal Piotrowski
     [not found]   ` <46D8921E.3010304@gmail.com>
2007-08-31 22:20     ` Patrizio Bassi [this message]
2007-08-31 22:20       ` Patrizio Bassi
2007-09-02 10:40       ` Alan Cox
2007-09-03 17:58         ` Jan Engelhardt
2007-09-03 19:54           ` Patrizio Bassi
2007-09-08  7:30           ` Jan Engelhardt
     [not found]             ` <46E26DAF.9020906@gmail.com>
2007-09-08 10:45               ` Jan Engelhardt
2007-09-09 11:17                 ` Patrizio Bassi
2007-09-09 11:35                 ` Patrizio Bassi
2007-09-11 22:46                   ` Andrew Morton
2007-09-12 18:21                     ` Jan Engelhardt
2007-09-12 18:49                       ` Patrizio Bassi
2007-09-12 20:01                         ` Jan Engelhardt
2007-09-12 20:44                         ` Bartlomiej Zolnierkiewicz
2007-09-12 21:31       ` Chuck Ebbert
2007-09-25 20:44         ` Patrizio Bassi
2007-10-10 20:22         ` Patrizio Bassi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=46D89429.7080802@gmail.com \
    --to=patrizio.bassi@gmail.com \
    --cc=alan@redhat.com \
    --cc=bzolnier@gmail.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michal.k.k.piotrowski@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.