All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rene Herman <rene.herman@gmail.com>
To: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Alsa-devel <alsa-devel@alsa-project.org>
Subject: Re: [PATCH] cs4231-lib: replace common delay loop by function
Date: Wed, 05 Sep 2007 00:37:01 +0200	[thread overview]
Message-ID: <46DDDE0D.7070904@gmail.com> (raw)
In-Reply-To: <20070904184927.0bb3bc7c.krzysztof.h1@wp.pl>

On 09/04/2007 06:49 PM, Krzysztof Helt wrote:

> +static void snd_cs4231_ready(struct snd_cs4231 *chip)
>  {
>  	int timeout;
> -	unsigned char tmp;
>  
>  	for (timeout = 250;
>  	     timeout > 0 && (cs4231_inb(chip, CS4231P(REGSEL)) & CS4231_INIT);
>  	     timeout--)
>  	     	udelay(100);
> +}
> +

Would you terribly mind calling this snd_cs4231_wait() or something close?

> +static void snd_cs4231_outm(struct snd_cs4231 *chip, unsigned char reg,
> +			    unsigned char mask, unsigned char value)
> +{
> +	unsigned char tmp = (chip->image[reg] & mask) | value;
> +
> +	snd_cs4231_ready(chip);
>  #ifdef CONFIG_SND_DEBUG
>  	if (cs4231_inb(chip, CS4231P(REGSEL)) & CS4231_INIT)
>  		snd_printk("outm: auto calibration time out - reg = 0x%x, value = 0x%x\n", reg, value);
>  #endif
> -	if (chip->calibrate_mute) {
> -		chip->image[reg] &= mask;
> -		chip->image[reg] |= value;
> -	} else {
> +	if (!chip->calibrate_mute) {
>  		cs4231_outb(chip, CS4231P(REGSEL), chip->mce_bit | reg);
> -		mb();
> -		tmp = (chip->image[reg] & mask) | value;
> +		wmb();
>  		cs4231_outb(chip, CS4231P(REG), tmp);
> -		chip->image[reg] = tmp;
>  		mb();
>  	}
> +	chip->image[reg] = tmp;
>  }

Mmm, for the ! case, the chip->image[reg] = tmp is now after the mb() -- but 
that's okay right?

Rene

       reply	other threads:[~2007-09-04 22:43 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20070904184927.0bb3bc7c.krzysztof.h1@wp.pl>
2007-09-04 22:37 ` Rene Herman [this message]
2007-09-05 17:09 [PATCH] cs4231-lib: replace common delay loop by function Krzysztof Helt
2007-09-05 19:11 ` Rene Herman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=46DDDE0D.7070904@gmail.com \
    --to=rene.herman@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=krzysztof.h1@wp.pl \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.