From: Rene Herman <rene.herman@gmail.com>
To: Krzysztof Helt <krzysztof.h1@gmail.com>
Cc: Alsa-devel <alsa-devel@alsa-project.org>,
Jaroslav Kysela <perex@suse.cz>
Subject: Re: [PATCH] cs4231: remove two auto-calibrations during chip initialization
Date: Tue, 18 Sep 2007 12:38:09 +0200 [thread overview]
Message-ID: <46EFAA91.6050305@gmail.com> (raw)
In-Reply-To: <20070918121758.5686aa96.krzysztof.h1@gmail.com>
On 09/18/2007 12:17 PM, Krzysztof Helt wrote:
> From: Krzysztof Helt <krzysztof.h1@wp.pl>
>
> The initialization function did auto-calibration after each
> register setting. This patch merges more register changes
> before auto-calibration is done.
Seems to make sense but am a little uneasy about these -- someone very much
did it this way on purpose originally it seems. Jaroslav, that someone was
you I believe? Do you remember anything about this?
> Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
> ---
>
> This is in the init() function so it is called just once.
> The patch is about cutting fat from cs4231 drivers as
> this change does not affect how they operate in any
> major way.
>
> diff -urp alsa-driver-1.0.15rc2/sound/isa/cs423x/cs4231_lib.c linux-2.6.23/sound/isa/cs423x/cs4231_lib.c
> --- alsa-driver-1.0.15rc2/sound/isa/cs423x/cs4231_lib.c 2007-09-12 13:33:51.000000000 +0200
> +++ linux-2.6.23/sound/isa/cs423x/cs4231_lib.c 2007-09-18 08:37:08.000000000 +0200
> @@ -652,15 +652,7 @@ static void snd_cs4231_init(struct snd_c
> CS4231_CALIB_MODE);
> chip->image[CS4231_IFACE_CTRL] |= CS4231_AUTOCALIB;
> snd_cs4231_out(chip, CS4231_IFACE_CTRL, chip->image[CS4231_IFACE_CTRL]);
> - spin_unlock_irqrestore(&chip->reg_lock, flags);
> - snd_cs4231_mce_down(chip);
> -
> -#ifdef SNDRV_DEBUG_MCE
> - snd_printk("init: (2)\n");
> -#endif
>
> - snd_cs4231_mce_up(chip);
> - spin_lock_irqsave(&chip->reg_lock, flags);
> snd_cs4231_out(chip, CS4231_ALT_FEATURE_1, chip->image[CS4231_ALT_FEATURE_1]);
> spin_unlock_irqrestore(&chip->reg_lock, flags);
> snd_cs4231_mce_down(chip);
> @@ -676,15 +668,6 @@ static void snd_cs4231_init(struct snd_c
> snd_cs4231_mce_up(chip);
> spin_lock_irqsave(&chip->reg_lock, flags);
> snd_cs4231_out(chip, CS4231_PLAYBK_FORMAT, chip->image[CS4231_PLAYBK_FORMAT]);
> - spin_unlock_irqrestore(&chip->reg_lock, flags);
> - snd_cs4231_mce_down(chip);
> -
> -#ifdef SNDRV_DEBUG_MCE
> - snd_printk("init: (4)\n");
> -#endif
> -
> - snd_cs4231_mce_up(chip);
> - spin_lock_irqsave(&chip->reg_lock, flags);
> snd_cs4231_out(chip, CS4231_REC_FORMAT, chip->image[CS4231_REC_FORMAT]);
> spin_unlock_irqrestore(&chip->reg_lock, flags);
> snd_cs4231_mce_down(chip);
> diff -urp linux-2.6.23.ref/sound/sparc/cs4231.c linux-2.6.23/sound/sparc/cs4231.c
> --- linux-2.6.23.ref/sound/sparc/cs4231.c 2007-09-18 09:26:12.000000000 +0200
> +++ linux-2.6.23/sound/sparc/cs4231.c 2007-09-18 09:26:54.000000000 +0200
> @@ -733,15 +733,6 @@ static void __init snd_cs4231_init(struc
> CS4231_CALIB_MODE);
> chip->image[CS4231_IFACE_CTRL] |= CS4231_AUTOCALIB;
> snd_cs4231_out(chip, CS4231_IFACE_CTRL, chip->image[CS4231_IFACE_CTRL]);
> - spin_unlock_irqrestore(&chip->lock, flags);
> - snd_cs4231_mce_down(chip);
> -
> -#ifdef SNDRV_DEBUG_MCE
> - snd_printdd("init: (2)\n");
> -#endif
> -
> - snd_cs4231_mce_up(chip);
> - spin_lock_irqsave(&chip->lock, flags);
> snd_cs4231_out(chip, CS4231_ALT_FEATURE_1, chip->image[CS4231_ALT_FEATURE_1]);
> spin_unlock_irqrestore(&chip->lock, flags);
> snd_cs4231_mce_down(chip);
> @@ -757,15 +748,6 @@ static void __init snd_cs4231_init(struc
> snd_cs4231_mce_up(chip);
> spin_lock_irqsave(&chip->lock, flags);
> snd_cs4231_out(chip, CS4231_PLAYBK_FORMAT, chip->image[CS4231_PLAYBK_FORMAT]);
> - spin_unlock_irqrestore(&chip->lock, flags);
> - snd_cs4231_mce_down(chip);
> -
> -#ifdef SNDRV_DEBUG_MCE
> - snd_printdd("init: (4)\n");
> -#endif
> -
> - snd_cs4231_mce_up(chip);
> - spin_lock_irqsave(&chip->lock, flags);
> snd_cs4231_out(chip, CS4231_REC_FORMAT, chip->image[CS4231_REC_FORMAT]);
> spin_unlock_irqrestore(&chip->lock, flags);
> snd_cs4231_mce_down(chip);
Rene.
next prev parent reply other threads:[~2007-09-18 10:39 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-18 10:17 [PATCH] cs4231: remove two auto-calibrations during chip initialization Krzysztof Helt
2007-09-18 10:38 ` Rene Herman [this message]
2007-09-18 11:08 ` Jaroslav Kysela
2007-09-18 11:26 ` Rene Herman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46EFAA91.6050305@gmail.com \
--to=rene.herman@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=krzysztof.h1@gmail.com \
--cc=perex@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.