From: Jiri Slaby <jirislaby@gmail.com>
To: Dave Airlie <airlied@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>,
Andrew Morton <akpm@linux-foundation.org>,
linux-kernel@vger.kernel.org
Subject: Re: X-freeze after clflush changes [Was: 2.6.23-rc6-mm1]
Date: Thu, 20 Sep 2007 09:24:56 +0200 [thread overview]
Message-ID: <46F22048.8050401@gmail.com> (raw)
In-Reply-To: <21d7e9970709191851s1b3f35c1j42faae3ce6cd0b24@mail.gmail.com>
On 09/20/2007 03:51 AM, Dave Airlie wrote:
> On 9/20/07, Jiri Slaby <jirislaby@gmail.com> wrote:
>> On 09/19/2007 09:54 PM, Andi Kleen wrote:
>>>> Yeah. (But X doesn't run -- this is maybe the known issue in this release).
>>> What do you mean with not run?
>> (II) intel(0): Initializing HW Cursor
>> (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x005ff000 (pgoffset 1535)
>> (WW) intel(0): xf86BindGARTMemory: binding of gart memory with key 0
>> at offset 0x5ff000 failed (Invalid argument)
>>
>> Fatal server error:
>> Couldn't bind memory for front buffer
>>
>> I thought I'd seen a thread about this issue, but I can't find it now. Is it
>> known or am I seeing ghosts yet, Andrew?
>>
>
> Can you send me a complete Xorg log file?
Maybe you are rather interested in these dmesg lines:
Linux agpgart interface v0.102
agpgart: suspend/resume problematic: resume with 3D/DRI active may lockup X.Org
on some chipset/BIOS combos (see DEBUG_AGP_PM in intel-agp.c)
agpgart: Detected an Intel G33 Chipset.
agpgart: Detected 8192K stolen memory.
agpgart: AGP aperture is 256M @ 0xd0000000
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[drm] Initialized i915 1.6.0 20060119 on minor 0
...
set status page addr 0x00033000
agpgart: pg_start == 0x000005ff,intel_private.gtt_entries == 0x00000800
agpgart: Trying to insert into local/stolen memory
So the problem is, that X passes too low start.
The X log:
http://www.fi.muni.cz/~xslaby/sklad/Xorg.0.log.old
> and lspci -vv?
# lspci -vvx
00:00.0 Host bridge: Intel Corporation DRAM Controller (rev 02)
Subsystem: Intel Corporation DRAM Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: [e0] Vendor Specific Information
00: 86 80 c0 29 06 00 90 20 02 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 c0 29
30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
00:02.0 VGA compatible controller: Intel Corporation Integrated Graphics
Controller (rev 02) (prog-if 00 [VGA])
Subsystem: Intel Corporation Integrated Graphics Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ffa80000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at ec00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at ff900000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 86 80 c2 29 07 00 90 00 02 00 00 03 00 00 00 00
10: 00 00 a8 ff 01 ec 00 00 08 00 00 d0 00 00 90 ff
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 c2 29
30: 00 00 00 00 90 00 00 00 00 00 00 00 0a 01 00 00
00:03.0 Communication controller: Intel Corporation MEI Controller (rev 02)
Subsystem: Intel Corporation MEI Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at ffa7bc00 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
00: 86 80 c4 29 06 00 10 00 02 00 80 07 00 00 80 00
10: 04 bc a7 ff 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 c4 29
30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
00:03.2 IDE interface: Intel Corporation PT IDER Controller (rev 02) (prog-if 85
[Master SecO PriO])
Subsystem: Intel Corporation PT IDER Controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 12
Region 0: I/O ports at e880 [size=8]
Region 1: I/O ports at e800 [size=4]
Region 2: I/O ports at e480 [size=8]
Region 3: I/O ports at e400 [size=4]
Region 4: I/O ports at e080 [size=16]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
00: 86 80 c6 29 05 00 b0 00 02 85 01 01 00 00 00 00
10: 81 e8 00 00 01 e8 00 00 81 e4 00 00 01 e4 00 00
20: 81 e0 00 00 00 00 00 00 00 00 00 00 86 80 c6 29
30: 00 00 00 00 c8 00 00 00 00 00 00 00 0c 03 00 00
00:03.3 Serial controller: Intel Corporation Serial KT Controller (rev 02)
(prog-if 02 [16550])
Subsystem: Intel Corporation Serial KT Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at e000 [size=8]
Region 1: Memory at ffa7a000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
00: 86 80 c7 29 07 00 b0 00 02 02 00 07 00 00 00 00
10: 01 e0 00 00 00 a0 a7 ff 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 c7 29
30: 00 00 00 00 c8 00 00 00 00 00 00 00 05 02 00 00
00:19.0 Ethernet controller: Intel Corporation 82566DM-2 Gigabit Network
Connection (rev 02)
Subsystem: Intel Corporation Unknown device 0000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 318
Region 0: Memory at ffa40000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at ffa79000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at dc00 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable+
Address: 00000000fee0300c Data: 4199
Capabilities: [e0] Vendor Specific Information
00: 86 80 bd 10 07 04 10 00 02 00 00 02 00 00 00 00
10: 00 00 a4 ff 00 90 a7 ff 01 dc 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 00 00
30: 00 00 00 00 c8 00 00 00 00 00 00 00 0f 01 00 00
00:1a.0 USB Controller: Intel Corporation USB UHCI Controller #4 (rev 02)
(prog-if 00 [UHCI])
Subsystem: Intel Corporation USB UHCI Controller #4
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at d880 [size=32]
Capabilities: [50] Vendor Specific Information
00: 86 80 37 29 05 00 90 02 02 00 03 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 81 d8 00 00 00 00 00 00 00 00 00 00 86 80 37 29
30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
00:1a.1 USB Controller: Intel Corporation USB UHCI Controller #5 (rev 02)
(prog-if 00 [UHCI])
Subsystem: Intel Corporation USB UHCI Controller #5
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at d800 [size=32]
Capabilities: [50] Vendor Specific Information
00: 86 80 38 29 05 00 90 02 02 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 d8 00 00 00 00 00 00 00 00 00 00 86 80 38 29
30: 00 00 00 00 50 00 00 00 00 00 00 00 0e 02 00 00
00:1a.2 USB Controller: Intel Corporation USB UHCI Controller #6 (rev 02)
(prog-if 00 [UHCI])
Subsystem: Intel Corporation USB UHCI Controller #6
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d480 [size=32]
Capabilities: [50] Vendor Specific Information
00: 86 80 39 29 05 00 90 02 02 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 81 d4 00 00 00 00 00 00 00 00 00 00 86 80 39 29
30: 00 00 00 00 50 00 00 00 00 00 00 00 0c 03 00 00
00:1a.7 USB Controller: Intel Corporation USB2 EHCI Controller #2 (rev 02)
(prog-if 20 [EHCI])
Subsystem: Intel Corporation USB2 EHCI Controller #2
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at ffa7b400 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port
Capabilities: [98] Vendor Specific Information
00: 86 80 3c 29 06 00 90 02 02 20 03 0c 00 00 00 00
10: 00 b4 a7 ff 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 3c 29
30: 00 00 00 00 50 00 00 00 00 00 00 00 03 04 00 00
00:1b.0 Audio device: Intel Corporation HD Audio Controller (rev 02)
Subsystem: Intel Corporation HD Audio Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at ffa70000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express Unknown type IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
Link: Latency L0s <64ns, L1 <1us
Link: ASPM Disabled CommClk- ExtSynch-
Link: Speed unknown, Width x0
Capabilities: [100] Virtual Channel
Capabilities: [130] Unknown (5)
00: 86 80 3e 29 06 00 10 00 02 00 03 04 08 00 00 00
10: 04 00 a7 ff 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 3e 29
30: 00 00 00 00 50 00 00 00 00 00 00 00 07 01 00 00
00:1d.0 USB Controller: Intel Corporation USB UHCI Controller #1 (rev 02)
(prog-if 00 [UHCI])
Subsystem: Intel Corporation USB UHCI Controller #1
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d400 [size=32]
Capabilities: [50] Vendor Specific Information
00: 86 80 34 29 05 00 90 02 02 00 03 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 d4 00 00 00 00 00 00 00 00 00 00 86 80 34 29
30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
00:1d.1 USB Controller: Intel Corporation USB UHCI Controller #2 (rev 02)
(prog-if 00 [UHCI])
Subsystem: Intel Corporation USB UHCI Controller #2
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d080 [size=32]
Capabilities: [50] Vendor Specific Information
00: 86 80 35 29 05 00 90 02 02 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 81 d0 00 00 00 00 00 00 00 00 00 00 86 80 35 29
30: 00 00 00 00 50 00 00 00 00 00 00 00 03 02 00 00
00:1d.2 USB Controller: Intel Corporation USB UHCI Controller #3 (rev 02)
(prog-if 00 [UHCI])
Subsystem: Intel Corporation USB UHCI Controller #3
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at d000 [size=32]
Capabilities: [50] Vendor Specific Information
00: 86 80 36 29 05 00 90 02 02 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 d0 00 00 00 00 00 00 00 00 00 00 86 80 36 29
30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 04 00 00
00:1d.7 USB Controller: Intel Corporation USB2 EHCI Controller #1 (rev 02)
(prog-if 20 [EHCI])
Subsystem: Intel Corporation USB2 EHCI Controller #1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at ffa7b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port
Capabilities: [98] Vendor Specific Information
00: 86 80 3a 29 06 00 90 02 02 20 03 0c 00 00 00 00
10: 00 b0 a7 ff 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 3a 29
30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) (prog-if 01
[Subtractive decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: ff600000-ff6fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Subsystem: Intel Corporation 82801 PCI Bridge
00: 86 80 4e 24 06 01 10 00 92 01 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 20 f0 00 80 22
20: 60 ff 60 ff f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 02 00
00:1f.0 ISA bridge: Intel Corporation LPC Interface Controller (rev 02)
Subsystem: Intel Corporation LPC Interface Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [e0] Vendor Specific Information
00: 86 80 10 29 07 00 10 02 02 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 10 29
30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
00:1f.2 SATA controller: Intel Corporation 6 port SATA AHCI Controller (rev 02)
(prog-if 01 [AHCI 1.0])
Subsystem: Intel Corporation 6 port SATA AHCI Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 319
Region 0: I/O ports at cc00 [size=8]
Region 1: I/O ports at c880 [size=4]
Region 2: I/O ports at c800 [size=8]
Region 3: I/O ports at c480 [size=4]
Region 4: I/O ports at c400 [size=32]
Region 5: Memory at ffa78800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/4
Enable+
Address: fee0300c Data: 4169
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] #12 [0010]
Capabilities: [b0] Vendor Specific Information
00: 86 80 22 29 07 04 b0 02 02 01 06 01 00 00 00 00
10: 01 cc 00 00 81 c8 00 00 01 c8 00 00 81 c4 00 00
20: 01 c4 00 00 00 88 a7 ff 00 00 00 00 86 80 22 29
30: 00 00 00 00 80 00 00 00 00 00 00 00 03 02 00 00
00:1f.3 SMBus: Intel Corporation SMBus Controller (rev 02)
Subsystem: Intel Corporation SMBus Controller
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at ffa7b800 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
00: 86 80 30 29 03 00 80 02 02 00 05 0c 00 00 00 00
10: 04 b8 a7 ff 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 04 00 00 00 00 00 00 00 00 00 00 86 80 30 29
30: 00 00 00 00 00 00 00 00 00 00 00 00 03 03 00 00
00:1f.5 IDE interface: Intel Corporation 2 port SATA IDE Controller (rev 02)
(prog-if 85 [Master SecO PriO])
Subsystem: Intel Corporation 2 port SATA IDE Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at bc00 [size=4]
Region 2: I/O ports at b880 [size=8]
Region 3: I/O ports at b800 [size=4]
Region 4: I/O ports at b480 [size=16]
Region 5: I/O ports at b400 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] Vendor Specific Information
00: 86 80 26 29 07 00 b0 02 02 85 01 01 00 00 00 00
10: 01 c0 00 00 01 bc 00 00 81 b8 00 00 01 b8 00 00
20: 81 b4 00 00 01 b4 00 00 00 00 00 00 86 80 26 29
30: 00 00 00 00 70 00 00 00 00 00 00 00 03 02 00 00
00:1f.6 Signal processing controller: Intel Corporation Thermal Subsystem (rev 02)
Subsystem: Intel Corporation Thermal Subsystem
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 12
Region 0: Memory at ffa6f000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 86 80 32 29 02 00 10 00 02 00 80 11 00 00 00 00
10: 04 f0 a6 ff 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 32 29
30: 00 00 00 00 50 00 00 00 00 00 00 00 0c 03 00 00
01:00.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC
(rev 01)
Subsystem: Wistron NeWeb Corp. CM9 Wireless a/b/g MiniPCI Adapter
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 7000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 14
Region 0: Memory at ff6f0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
00: 8c 16 13 00 16 00 90 02 01 00 00 02 08 40 00 00
10: 00 00 6f ff 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 01 50 00 00 5f 18 12 10
30: 00 00 00 00 44 00 00 00 00 00 00 00 0e 01 0a 1c
> my 945 works fine with my drm tree on top of Linus with clflush + my
> agp fix I just sent out ..
Should I try?
regards,
--
Jiri Slaby (jirislaby@gmail.com)
Faculty of Informatics, Masaryk University
next prev parent reply other threads:[~2007-09-20 7:25 UTC|newest]
Thread overview: 261+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-18 8:18 2.6.23-rc6-mm1 Andrew Morton
2007-09-18 8:24 ` 2.6.23-rc6-mm1 Andrew Morton
2007-09-18 9:13 ` 2.6.23-rc6-mm1 Kamalesh Babulal
2007-09-18 9:27 ` 2.6.23-rc6-mm1 Andrew Morton
2007-09-18 9:34 ` 2.6.23-rc6-mm1 Satyam Sharma
2007-09-18 19:17 ` 2.6.23-rc6-mm1 Greg KH
2007-09-22 9:21 ` 2.6.23-rc6-mm1 Satyam Sharma
2007-09-25 5:35 ` 2.6.23-rc6-mm1 Greg KH
2007-09-18 9:34 ` 2.6.23-rc6-mm1 Andy Whitcroft
2007-09-18 9:34 ` 2.6.23-rc6-mm1 Andy Whitcroft
2007-09-18 10:02 ` 2.6.23-rc6-mm1 Benjamin Herrenschmidt
2007-09-18 10:02 ` 2.6.23-rc6-mm1 Benjamin Herrenschmidt
2007-09-18 12:07 ` 2.6.23-rc6-mm1 Kamalesh Babulal
2007-09-18 12:07 ` 2.6.23-rc6-mm1 Kamalesh Babulal
2007-09-18 16:53 ` 2.6.23-rc6-mm1 Andrew Morton
2007-09-18 16:53 ` 2.6.23-rc6-mm1 Andrew Morton
2007-09-18 19:16 ` 2.6.23-rc6-mm1 Greg KH
2007-09-18 19:16 ` 2.6.23-rc6-mm1 Greg KH
2007-09-18 21:35 ` 2.6.23-rc6-mm1 Benjamin Herrenschmidt
2007-09-18 21:35 ` 2.6.23-rc6-mm1 Benjamin Herrenschmidt
2007-09-18 15:07 ` 2.6.23-rc6-mm1 Valdis.Kletnieks
2007-09-18 15:50 ` 2.6.23-rc6-mm1 Sam Ravnborg
2007-09-18 15:27 ` 2.6.23-rc6-mm1 Miles Lane
2007-09-18 15:39 ` 2.6.23-rc6-mm1 Miles Lane
2007-09-18 15:52 ` 2.6.23-rc6-mm1 Sam Ravnborg
2007-09-18 19:17 ` 2.6.23-rc6-mm1 Sam Ravnborg
2007-09-18 19:42 ` 2.6.23-rc6-mm1 Miles Lane
2007-09-18 20:26 ` 2.6.23-rc6-mm1 Sam Ravnborg
2007-09-18 22:38 ` 2.6.23-rc6-mm1 Gabriel C
2007-09-18 22:48 ` 2.6.23-rc6-mm1 Gabriel C
2007-09-19 19:33 ` 2.6.23-rc6-mm1 Sam Ravnborg
2007-09-19 20:36 ` 2.6.23-rc6-mm1 Gabriel C
2007-09-19 20:43 ` 2.6.23-rc6-mm1 Sam Ravnborg
2007-09-19 18:48 ` 2.6.23-rc6-mm1 Sam Ravnborg
2007-09-18 15:43 ` modpost errors ( Re: 2.6.23-rc6-mm1) Gabriel C
2007-09-18 15:56 ` Sam Ravnborg
2007-09-18 16:37 ` [v4l-dvb-maintainer] " mkrufky
2007-09-18 22:06 ` Mauro Carvalho Chehab
2007-09-18 16:20 ` 2.6.23-rc6-mm1: Build failure on ppc64 drivers/net/ehea/ehea_main.c Mel Gorman
2007-09-18 16:41 ` Mel Gorman
2007-09-18 19:08 ` David Miller
2007-09-18 17:18 ` 2.6.23-rc6-mm1 (watchdog) Randy Dunlap
2007-09-18 17:41 ` Randy Dunlap
2007-09-18 17:20 ` 2.6.23-rc6-mm1 Miles Lane
2007-09-18 18:05 ` 2.6.23-rc6-mm1 Mel Gorman
2007-09-18 17:44 ` 2.6.23-rc6-mm1 Mel Gorman
2007-09-19 16:29 ` 2.6.23-rc6-mm1: kgdb support on ppc64 utterly broken Mel Gorman
2007-09-19 16:29 ` Mel Gorman
2007-09-22 8:41 ` 2.6.23-rc6-mm1 Satyam Sharma
2007-09-24 11:14 ` 2.6.23-rc6-mm1 Mel Gorman
2007-09-18 19:32 ` 2.6.23-rc6-mm1 - Mostly working, with a kbuild oddity Valdis.Kletnieks
2007-09-18 20:32 ` Sam Ravnborg
2007-09-18 22:03 ` Valdis.Kletnieks
2007-09-19 7:34 ` Sam Ravnborg
2007-09-19 15:53 ` Valdis.Kletnieks
2007-09-19 17:39 ` Sam Ravnborg
2007-09-18 20:21 ` 2.6.23-rc6-mm1: failure to boot on HP nx6325 Rafael J. Wysocki
2007-09-18 20:54 ` Rafael J. Wysocki
2007-09-18 21:37 ` 2.6.23-rc6-mm1: failure to boot on HP nx6325, no sound when booted, USB-related WARNING Rafael J. Wysocki
2007-09-19 7:06 ` Thomas Gleixner
2007-09-19 17:44 ` Rafael J. Wysocki
2007-09-19 19:21 ` Thomas Gleixner
2007-09-20 0:06 ` Rafael J. Wysocki
2007-09-20 6:18 ` Thomas Gleixner
2007-09-20 13:29 ` Rafael J. Wysocki
2007-09-20 13:43 ` Thomas Gleixner
2007-09-20 14:12 ` Rafael J. Wysocki
2007-09-20 13:53 ` Thomas Gleixner
2007-09-20 14:47 ` Rafael J. Wysocki
2007-09-20 14:50 ` Thomas Gleixner
2007-09-20 15:49 ` Thomas Gleixner
2007-09-20 20:39 ` Rafael J. Wysocki
2007-09-20 21:08 ` Thomas Gleixner
2007-09-20 21:35 ` Linus Torvalds
2007-09-20 21:54 ` Rafael J. Wysocki
2007-09-20 22:01 ` Thomas Gleixner
2007-09-20 21:55 ` Linus Torvalds
2007-09-20 22:05 ` Thomas Gleixner
2007-09-20 22:30 ` Rafael J. Wysocki
2007-09-21 12:59 ` Thomas Gleixner
2007-09-21 14:20 ` Rafael J. Wysocki
2007-09-21 16:27 ` Thomas Gleixner
2007-09-21 19:20 ` Rafael J. Wysocki
2007-09-21 19:16 ` Thomas Gleixner
2007-09-21 19:37 ` Rafael J. Wysocki
2007-09-20 23:35 ` Len Brown
2007-09-21 7:56 ` Thomas Gleixner
2007-09-21 9:25 ` Rafael J. Wysocki
2007-09-21 4:51 ` Paul Mackerras
2007-09-21 8:06 ` Thomas Gleixner
2007-10-11 21:19 ` Pavel Machek
2007-09-20 21:45 ` Rafael J. Wysocki
2007-09-20 21:53 ` Thomas Gleixner
2007-09-20 22:35 ` Rafael J. Wysocki
2007-09-21 9:24 ` Rafael J. Wysocki
2007-09-20 20:42 ` Rafael J. Wysocki
2007-09-18 20:54 ` 2.6.23-rc6-mm1 sparc build error Mathieu Desnoyers
2007-09-18 20:54 ` Mathieu Desnoyers
2007-09-18 21:05 ` Andrew Morton
2007-09-18 21:05 ` Andrew Morton
2007-09-20 12:53 ` Guennadi Liakhovetski
2007-09-20 12:53 ` Guennadi Liakhovetski
2007-09-21 13:51 ` Mathieu Desnoyers
2007-09-21 13:51 ` Mathieu Desnoyers
2007-09-18 21:45 ` 2.6.23-rc6-mm1: atomic counter underflow Mariusz Kozlowski
2007-09-19 8:27 ` Cornelia Huck
2007-09-19 16:43 ` Mariusz Kozlowski
2007-09-19 18:02 ` Cornelia Huck
2007-09-20 7:42 ` kobject: Temporarily save k_name on cleanup for debug message Cornelia Huck
2007-09-20 7:43 ` Cornelia Huck
2007-09-20 17:26 ` Mariusz Kozlowski
2007-09-20 13:35 ` 2.6.23-rc6-mm1: atomic counter underflow Cornelia Huck
2007-09-20 16:30 ` Pierre Ossman
2007-09-20 17:27 ` Mariusz Kozlowski
2007-09-19 9:28 ` 2.6.23-rc6-mm1 -- powerpc link failure Andy Whitcroft
2007-09-19 9:28 ` Andy Whitcroft
2007-09-19 16:36 ` Segher Boessenkool
2007-09-19 16:52 ` Andy Whitcroft
2007-09-19 17:44 ` Sam Ravnborg
2007-09-19 17:44 ` Sam Ravnborg
2007-09-25 13:40 ` Andy Whitcroft
2007-09-25 13:40 ` Andy Whitcroft
2007-09-19 9:36 ` 2.6.23-rc6-mm1 -- powerpc pSeries_log_error panic in rtas_call/early_enable_eeh Andy Whitcroft
2007-09-19 9:36 ` Andy Whitcroft
2007-09-19 11:43 ` X-freeze after clflush changes [Was: 2.6.23-rc6-mm1] Jiri Slaby
2007-09-19 11:53 ` Jiri Slaby
2007-09-19 14:59 ` Jiri Slaby
2007-09-19 19:10 ` Andrew Morton
2007-09-19 19:24 ` Andi Kleen
2007-09-19 19:46 ` Jiri Slaby
2007-09-19 19:54 ` Andi Kleen
2007-09-19 19:57 ` Jiri Slaby
2007-09-19 20:01 ` Jiri Slaby
2007-09-19 21:42 ` Andrew Morton
2007-09-19 20:32 ` Valdis.Kletnieks
2007-09-19 20:47 ` Jiri Slaby
2007-09-20 13:17 ` Valdis.Kletnieks
2007-09-20 22:24 ` Dave Airlie
2007-09-20 1:51 ` Dave Airlie
2007-09-20 7:24 ` Jiri Slaby [this message]
2007-09-20 7:33 ` Dave Airlie
2007-09-20 9:24 ` Zhenyu Wang
2007-09-20 22:10 ` Jiri Slaby
2007-09-21 1:27 ` Zhenyu Wang
2007-09-20 0:18 ` Dave Airlie
2007-09-20 1:42 ` Dave Airlie
2007-09-20 2:24 ` Andrew Morton
2007-09-20 7:19 ` Jiri Slaby
2007-09-20 22:06 ` Matt Mackall
2007-09-20 23:03 ` Andi Kleen
2007-09-20 23:31 ` Matt Mackall
2007-09-20 23:44 ` Andi Kleen
2007-09-21 17:18 ` Valdis.Kletnieks
2007-09-21 7:07 ` Jiri Slaby
2007-09-21 17:16 ` Valdis.Kletnieks
2007-09-21 17:30 ` Jiri Slaby
2007-09-21 17:54 ` Valdis.Kletnieks
2007-09-21 19:33 ` Valdis.Kletnieks
2007-09-21 19:38 ` Jiri Slaby
2007-09-21 19:43 ` Jiri Slaby
2007-09-24 3:25 ` Valdis.Kletnieks
2007-09-24 6:06 ` Jiri Slaby
2007-09-24 7:37 ` Valdis.Kletnieks
2007-09-24 8:10 ` Jiri Slaby
2007-09-19 16:43 ` 2.6.23-rc6-mm1 -- mkfs stuck in 'D' Andy Whitcroft
2007-09-19 20:03 ` Hugh Dickins
2007-09-19 20:44 ` Peter Zijlstra
2007-09-20 11:31 ` Hugh Dickins
2007-09-20 12:15 ` Peter Zijlstra
2007-09-22 1:55 ` Fengguang Wu
2007-09-22 1:55 ` Fengguang Wu
2007-09-22 13:16 ` Peter Zijlstra
2007-09-23 1:20 ` Fengguang Wu
2007-09-23 1:20 ` Fengguang Wu
2007-09-23 13:02 ` Peter Zijlstra
2007-09-24 3:01 ` Fengguang Wu
2007-09-24 3:01 ` Fengguang Wu
2007-09-24 7:35 ` Peter Zijlstra
2007-09-24 8:12 ` Fengguang Wu
2007-09-24 8:12 ` Fengguang Wu
2007-09-23 14:19 ` 2.6.23-rc6-mm1 -- ipg.c don't compile on i386 with CONFIG_HIGHMEM64G trem
2007-09-19 23:02 ` 2.6.23-rc6-mm1 Tilman Schmidt
2007-09-19 23:24 ` 2.6.23-rc6-mm1 Andrew Morton
2007-09-19 23:28 ` 2.6.23-rc6-mm1 Chuck Ebbert
2007-09-19 23:55 ` 2.6.23-rc6-mm1 Tilman Schmidt
2007-09-20 19:10 ` 2.6.23-rc6-mm1 Tilman Schmidt
2007-09-19 23:44 ` 2.6.23-rc6-mm1 David Brownell
2007-09-20 0:06 ` 2.6.23-rc6-mm1 Andrew Morton
2007-09-20 4:43 ` 2.6.23-rc6-mm1 David Brownell
2007-09-20 6:11 ` 2.6.23-rc6-mm1 Andrew Morton
2007-09-20 7:54 ` 2.6.23-rc6-mm1 Kay Sievers
2007-09-20 16:15 ` 2.6.23-rc6-mm1 David Brownell
2007-09-20 8:51 ` 2.6.23-rc6-mm1 Alessandro Zummo
2007-09-20 17:36 ` 2.6.23-rc6-mm1 David Brownell
2007-09-20 19:20 ` 2.6.23-rc6-mm1 Tilman Schmidt
2007-09-20 20:25 ` 2.6.23-rc6-mm1 Andrew Morton
2007-09-21 0:53 ` 2.6.23-rc6-mm1 Tilman Schmidt
2007-09-19 23:58 ` 2.6.23-rc6-mm1 Joseph Fannin
2007-09-20 0:09 ` 2.6.23-rc6-mm1 Andrew Morton
[not found] ` <f86d6cc00709200721h6e8f7cf8xa2264e9d1f88883b@mail.gmail.com>
[not found] ` <f86d6cc00709200912j37a3218boa882a044c0610779@mail.gmail.com>
2007-09-20 19:44 ` 2.6.23-rc6-mm1 Andrew Morton
2007-09-21 2:04 ` 2.6.23-rc6-mm1 Joseph Fannin
2007-09-21 2:04 ` [PATCH] make mv643xx_eth.c build again Joseph Fannin
2007-09-20 8:41 ` 2.6.23-rc6-mm1 - make access to tasks nsproxy ligther (fix) Cedric Le Goater
2007-09-20 8:59 ` Pavel Emelyanov
2007-09-20 9:12 ` Cedric Le Goater
2007-09-20 17:08 ` Cedric Le Goater
2007-09-24 4:00 ` Serge E. Hallyn
2007-09-20 13:13 ` 2.6.23-rc6-mm1: Build failure on ppc64 drivers/ata/pata_scc.c Mel Gorman
2007-09-20 13:13 ` Mel Gorman
2007-09-20 14:09 ` Alan Cox
2007-09-20 14:09 ` Alan Cox
2007-09-20 14:09 ` Alan Cox
2007-09-20 15:14 ` Mel Gorman
2007-09-20 15:14 ` Mel Gorman
2007-09-20 15:45 ` Kamalesh Babulal
2007-09-20 15:45 ` Kamalesh Babulal
2007-09-20 15:49 ` Kamalesh Babulal
2007-09-20 15:49 ` Kamalesh Babulal
2007-09-22 2:50 ` Satyam Sharma
2007-09-22 2:50 ` Satyam Sharma
2007-09-24 11:01 ` Mel Gorman
2007-09-24 11:01 ` Mel Gorman
2007-09-26 3:39 ` Jeff Garzik
2007-09-26 3:39 ` Jeff Garzik
2007-09-20 13:25 ` Build failure on ppc64 drivers/block/ps3disk.c Mel Gorman
2007-09-20 13:25 ` Mel Gorman
2007-09-20 13:32 ` Jens Axboe
2007-09-20 13:32 ` Jens Axboe
2007-09-20 13:37 ` 2.6.23-rc6-mm1: Build failures on ppc64_defconfig Satyam Sharma
2007-09-20 13:37 ` Satyam Sharma
2007-09-22 6:50 ` Satyam Sharma
2007-09-22 6:50 ` Satyam Sharma
2007-09-22 6:51 ` Satyam Sharma
2007-09-22 6:51 ` Satyam Sharma
2007-09-22 6:54 ` Satyam Sharma
2007-09-22 6:54 ` Satyam Sharma
2007-09-24 11:12 ` Mel Gorman
2007-09-24 11:12 ` Mel Gorman
2007-09-22 7:25 ` Satyam Sharma
2007-09-22 7:25 ` Satyam Sharma
2007-09-22 7:40 ` [PATCH -mm] pasemi_mac: Build fix after recent netdev stats changes Satyam Sharma
2007-09-21 2:05 ` [PATCH] Remove broken netfilter binary sysctls from bridging code Joseph Fannin
2007-09-21 4:21 ` Eric W. Biederman
2007-09-24 16:55 ` Patrick McHardy
2007-09-24 20:14 ` Stephen Hemminger
2007-09-25 4:07 ` Patrick McHardy
2007-09-25 16:12 ` Stephen Hemminger
2007-09-25 16:22 ` Patrick McHardy
2007-09-25 14:03 ` Eric W. Biederman
2007-09-25 14:26 ` Patrick McHardy
2007-09-25 16:38 ` Eric W. Biederman
2007-09-22 7:54 ` [PATCH -mm] mv643xx_eth: Remove redundant multiple initialization Satyam Sharma
2007-09-22 7:55 ` [PATCH -mm] iseries_veth: Kill unused variable Satyam Sharma
2007-09-23 1:42 ` [BUG 2.6.23-rc6-mm1] NMI Watchdog detected LOCKUP on CPU 0 Fengguang Wu
2007-09-23 1:42 ` Fengguang Wu
2007-09-23 4:22 ` Andrew Morton
2007-09-23 5:30 ` Fengguang Wu
2007-09-23 5:30 ` Fengguang Wu
2007-09-23 5:35 ` Andrew Morton
2007-09-23 5:53 ` Fengguang Wu
2007-09-23 5:53 ` Fengguang Wu
2007-09-23 1:52 ` Fengguang Wu
2007-09-23 1:52 ` Fengguang Wu
2007-09-23 3:01 ` [-mm Patch] net/bluetooth/hidp/core.c: Make hidp_setup_input() return int WANG Cong
2007-09-23 22:13 ` roel
2007-09-24 2:38 ` WANG Cong
2007-09-24 2:50 ` [Resend][-mm " WANG Cong
2007-09-24 7:09 ` [Bluez-devel] [-mm " Marcel Holtmann
2007-09-24 7:09 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46F22048.8050401@gmail.com \
--to=jirislaby@gmail.com \
--cc=airlied@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=andi@firstfloor.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.