[PATCH 05/14] MMC: OMAP: General cleanup for MMC multislot support

[PATCH 05/14] MMC: OMAP: General cleanup for MMC multislot support

[Carlos Aguiar]

From: Juha Yrjola <juha.yrjola@solidboot.com>

General code cleanup, modifications at some dev_* functions and
other hacks at mmc_omap_irq() for MMC multislot support.

Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
---
 drivers/mmc/host/omap.c |   52 ++++++++++++++++++++++++++++-------------------
 1 files changed, 31 insertions(+), 21 deletions(-)

diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 4e32149..992b27f 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -563,11 +563,12 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
 	u16 status;
 	int end_command;
 	int end_transfer;
-	int transfer_error;
+	int transfer_error, cmd_error;
 
 	if (host->cmd == NULL && host->data == NULL) {
 		status = OMAP_MMC_READ(host, STAT);
-		dev_info(mmc_dev(host->mmc),"spurious irq 0x%04x\n", status);
+		dev_info(mmc_dev(host->slots[0]->mmc),
+			 "Spurious IRQ 0x%04x\n", status);
 		if (status != 0) {
 			OMAP_MMC_WRITE(host, STAT, status);
 			OMAP_MMC_WRITE(host, IE, 0);
@@ -578,12 +579,19 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
 	end_command = 0;
 	end_transfer = 0;
 	transfer_error = 0;
+	cmd_error = 0;
 
 	while ((status = OMAP_MMC_READ(host, STAT)) != 0) {
+		int cmd;
+
 		OMAP_MMC_WRITE(host, STAT, status);
+		if (host->cmd != NULL)
+			cmd = host->cmd->opcode;
+		else
+			cmd = -1;
 #ifdef CONFIG_MMC_DEBUG
 		dev_dbg(mmc_dev(host->mmc), "MMC IRQ %04x (CMD %d): ",
-			status, host->cmd != NULL ? host->cmd->opcode : -1);
+			status, cmd);
 		mmc_omap_report_irq(status);
 		printk("\n");
 #endif
@@ -595,12 +603,12 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
 				mmc_omap_xfer_data(host, 1);
 		}
 
-		if (status & OMAP_MMC_STAT_END_OF_DATA) {
+		if (status & OMAP_MMC_STAT_END_OF_DATA)
 			end_transfer = 1;
-		}
 
 		if (status & OMAP_MMC_STAT_DATA_TOUT) {
-			dev_dbg(mmc_dev(host->mmc), "data timeout\n");
+			dev_dbg(mmc_dev(host->mmc), "data timeout (CMD%d)\n",
+				cmd);
 			if (host->data) {
 				host->data->error |= MMC_ERR_TIMEOUT;
 				transfer_error = 1;
@@ -625,16 +633,16 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
 				struct mmc_omap_slot *slot =
 					host->current_slot;
 				if (host->cmd->opcode != MMC_ALL_SEND_CID &&
-						host->cmd->opcode !=
-						MMC_SEND_OP_COND &&
-						host->cmd->opcode !=
-						MMC_APP_CMD &&
-						!mmc_omap_cover_is_open(slot))
+				    host->cmd->opcode != MMC_SEND_OP_COND &&
+				    host->cmd->opcode != MMC_APP_CMD &&
+				    (slot == NULL ||
+				     !mmc_omap_cover_is_open(slot)))
 					dev_err(mmc_dev(host->mmc),
-						"command timeout, CMD %d\n",
-						host->cmd->opcode);
+						"command timeout (CMD%d)\n",
+						cmd);
 				host->cmd->error = MMC_ERR_TIMEOUT;
 				end_command = 1;
+				cmd_error = 1;
 			}
 		}
 
@@ -642,9 +650,10 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
 			if (host->cmd) {
 				dev_err(mmc_dev(host->mmc),
 					"command CRC error (CMD%d, arg 0x%08x)\n",
-					host->cmd->opcode, host->cmd->arg);
+					cmd, host->cmd->arg);
 				host->cmd->error = MMC_ERR_BADCRC;
 				end_command = 1;
+				cmd_error = 1;
 			} else
 				dev_err(mmc_dev(host->mmc),
 					"command CRC error without cmd?\n");
@@ -653,13 +662,13 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
 		if (status & OMAP_MMC_STAT_CARD_ERR) {
 			dev_dbg(mmc_dev(host->mmc),
 				"ignoring card status error (CMD%d)\n",
-				host->cmd->opcode);
+				cmd);
 			end_command = 1;
 		}
 
 		/*
 		 * NOTE: On 1610 the END_OF_CMD may come too early when
-		 * starting a write 
+		 * starting a write
 		 */
 		if ((status & OMAP_MMC_STAT_END_OF_CMD) &&
 		    (!(status & OMAP_MMC_STAT_A_EMPTY))) {
@@ -667,13 +676,14 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
 		}
 	}
 
-	if (end_command) {
+	if (end_command)
 		mmc_omap_cmd_done(host, host->cmd);
+	if (host->data != NULL) {
+		if (transfer_error)
+			mmc_omap_xfer_done(host, host->data);
+		else if (end_transfer)
+			mmc_omap_end_of_data(host, host->data);
 	}
-	if (transfer_error)
-		mmc_omap_xfer_done(host, host->data);
-	else if (end_transfer)
-		mmc_omap_end_of_data(host, host->data);
 
 	return IRQ_HANDLED;
 }
-- 1.5.3.GIT