From: Valentine Barshak <vbarshak@ru.mvista.com>
To: Stefan Roese <sr@denx.de>
Cc: linuxppc-dev@ozlabs.org
Subject: Re: AMCC yosemite 440ep PCI slot doesn't work.
Date: Mon, 24 Sep 2007 15:20:12 +0400 [thread overview]
Message-ID: <46F79D6C.5070500@ru.mvista.com> (raw)
In-Reply-To: <200709241314.18123.sr@denx.de>
Stefan Roese wrote:
> On Monday 24 September 2007, Andrew Liu wrote:
>> By default, it is IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE
>
> And that should be correct for PCI interrupts.
>
>> I change it to IRQ_SENSE_EDGE | IRQ_POLARITY_NEGATIVE or
>> IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE.
>> It displays:
>> eth2: link up, 100Mbps, full-duplex, lpa 0x45E1
>> eth2: no IPv6 routers present
>> NETDEV WATCHDOG: eth2: transmit timed out
>> eth2: Transmit timeout, status 0c 0005 c07f media 10.
>> eth2: Tx queue start entry 4 dirty entry 0.
>> eth2: Tx descriptor 0 is 0008a05a. (queue head)
>> eth2: Tx descriptor 1 is 0008a04e.
>> eth2: Tx descriptor 2 is 0008a046.
>> eth2: Tx descriptor 3 is 0008a05a.
>> eth2: link up, 100Mbps, full-duplex, lpa 0x45E1
>>
>> and
>> root@localhost:/root> ifconfig eth2
>> eth2 Link encap:Ethernet HWaddr 00:0E:2E:7E:F5:E6
>> inet addr:128.224.149.13 Bcast:128.224.255.255 Mask:255.255.0.0
>> inet6 addr: fe80::20e:2eff:fe7e:f5e6/64 Scope:Link
>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
>> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>> collisions:0 txqueuelen:1000
>> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
>> Interrupt:25 Base address:0x6f00
>>
>>
>> and
>> root@localhost:/root> cat /proc/interrupts
>> CPU0
>> 2: 0 UIC0 Edge IBM IIC
>> 7: 0 UIC0 Edge IBM IIC
>> 10: 11961 UIC0 Edge MAL TX EOB
>> 11: 18471 UIC0 Edge MAL RX EOB
>> 25: 0 UIC0 Edge eth2
>> 32: 0 UIC1 Edge MAL SERR
>> 33: 0 UIC1 Edge MAL TX DE
>> 34: 0 UIC1 Edge MAL RX DE
>> 40: 32 UIC1 Edge ohci_hcd:usb1
>> 60: 0 UIC1 Edge EMAC
>> BAD: 0
>>
>>
>> Can PCI slot use level trigger?
>>
>> give me some advice.
This could be caused by misseting the IRQ_lEVEL flag in desc->status.
There have been a commit 4dc7b4b0405fd7320940849b6e31ea8ea68fd0df that
fixes the problem.
Thanks,
Valentine.
>
> Hmmm. Did you try an earlier Linux version too? For example 2.6.22 or even
> earlier? Please give it a try and let us know if the same problem occurs.
>
> Best regards,
> Stefan
>
> =====================================================================
> DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de
> =====================================================================
next prev parent reply other threads:[~2007-09-24 11:21 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-21 10:53 AMCC yosemite 440ep PCI slot doesn't work Andrew Liu
2007-09-21 15:14 ` Valentine Barshak
2007-09-24 9:34 ` Andrew Liu
2007-09-24 11:14 ` Stefan Roese
2007-09-24 11:20 ` Valentine Barshak [this message]
2007-09-25 2:05 ` Andrew Liu
2007-09-25 2:02 ` Andrew Liu
2007-09-25 5:18 ` Stefan Roese
2007-09-25 13:21 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46F79D6C.5070500@ru.mvista.com \
--to=vbarshak@ru.mvista.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=sr@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.