* [XSM:ACM] When cw is used, dom0 reboots.
@ 2007-09-25 3:02 Syunsuke HAYASHI
2007-09-25 22:48 ` George S. Coker, II
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Syunsuke HAYASHI @ 2007-09-25 3:02 UTC (permalink / raw)
To: xen-devel
Hi ,
When cw is used, dom0 reboots.
Though I set quest memory size.
I want to study into the cause.
Please teach how to examine it.
#xm create vm1.conf <-- OK
#xm create vm4.conf <-- NO
................... <-- system boot
#last
root pts/1 myPC Tue Sep 25 11:25 - crash (09:01)
reboot system boot 2.6.18-xen Tue Sep 25 20:06 (-8:-16)
~~~~~~~~~~~
---------------about my setting--------------------
Xen-api is effective.
#cat vm1.conf
kernel = "/boot/vmlinuz-2.6.18-xen"
ramdisk = "/boot/initrd-2.6.18-xenU.img"
memory = "128"
~~~~
name = "vm1"
disk = [ 'file:/xen/vm1.img,sda1,w' ]
vif = [ '' ]
root = "/dev/sda1 ro"
on_xend_stop = "suspend"
extra = "3 xencons=tty"
access_control = ['policy=example.client_v1,label=dom_HomeBanking']
#cat vm4.conf
kernel = "/boot/vmlinuz-2.6.18-xen"
ramdisk = "/boot/initrd-2.6.18-xenU.img"
memory = "128"
~~~~~
name = "vm4"
disk = [ 'file:/xen/vm4.img,sda1,w']
vif = [ '' ]
root = "/dev/sda1 ro"
on_xend_stop = "suspend"
extra = "3"
access_control = ['policy=example.client_v1,label=dom_Fun']
#xm dumppolicy
Policy dump:
============
POLICY REFERENCE = example.client_v1.
PolicyVer = 0.
XML Vers. = 1.0
Magic = 1debc.
Len = 198.
Primary = CHINESE WALL (c=1, off=40).
Secondary = SIMPLE TYPE ENFORCEMENT (c=2, off=b8).
Chinese Wall policy:
====================
Policy version= 0.
Max Types = 4.
Max Ssidrefs = 7.
Max ConfSets = 1.
Ssidrefs Off = 24.
Conflicts Off = 5c.
Runing T. Off = 64.
C. Agg. Off = 6c.
SSID To CHWALL-Type matrix:
ssidref 0: 00 00 00 00
ssidref 1: 00 00 00 01 <-- Domain-0
ssidref 2: 00 01 00 00
ssidref 3: 01 00 00 00
ssidref 4: 00 00 01 00
ssidref 5: 00 00 00 01
ssidref 6: 00 00 00 01
Confict Sets:
c-set 0: 01 00 01 00
Running
Types: 00 00 00 01
Conflict
Aggregate Set: 00 00 00 00
Simple Type Enforcement policy:
===============================
Policy version= 0.
Max Types = 6.
Max Ssidrefs = 11.
Ssidrefs Off = 14.
SSID To STE-Type matrix:
ssidref 0: 00 00 00 00 00 00
ssidref 1: 01 01 01 01 01 01 <-- Domain-0
ssidref 2: 01 00 00 00 00 00
ssidref 3: 00 01 00 00 00 00
ssidref 4: 00 00 00 00 01 00
ssidref 5: 01 01 01 00 01 00
ssidref 6: 00 01 00 01 01 00
ssidref 7: 00 00 01 00 00 00
ssidref 8: 00 00 00 00 00 01
ssidref 9: 00 00 00 01 00 00
ssidref a: 00 00 00 00 01 00
ssidref b: 00 01 00 00 00 00
ssidref c: 00 00 00 00 01 00
ssidref d: 00 00 00 00 01 00
ssidref e: 00 01 00 00 00 00
ssidref f: 00 00 00 00 00 01
ssidref10: 00 00 00 00 01 00
Thanks,
Syunsuke Hayashi.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [XSM:ACM] When cw is used, dom0 reboots.
2007-09-25 3:02 [XSM:ACM] When cw is used, dom0 reboots Syunsuke HAYASHI
@ 2007-09-25 22:48 ` George S. Coker, II
2007-09-26 0:02 ` Stefan Berger
2007-09-27 16:44 ` George S. Coker, II
2 siblings, 0 replies; 5+ messages in thread
From: George S. Coker, II @ 2007-09-25 22:48 UTC (permalink / raw)
To: Syunsuke HAYASHI; +Cc: xen-devel
Please try debugging Xen through the serial console. You can do this by
passing 'com1=115200,8n1' to Xen through your bootloader.
On Tue, 2007-09-25 at 12:02 +0900, Syunsuke HAYASHI wrote:
> Hi ,
>
> When cw is used, dom0 reboots.
> Though I set quest memory size.
>
> I want to study into the cause.
> Please teach how to examine it.
>
>
>
>
> #xm create vm1.conf <-- OK
> #xm create vm4.conf <-- NO
> ................... <-- system boot
>
> #last
> root pts/1 myPC Tue Sep 25 11:25 - crash (09:01)
> reboot system boot 2.6.18-xen Tue Sep 25 20:06 (-8:-16)
> ~~~~~~~~~~~
>
>
> ---------------about my setting--------------------
> Xen-api is effective.
>
>
> #cat vm1.conf
> kernel = "/boot/vmlinuz-2.6.18-xen"
> ramdisk = "/boot/initrd-2.6.18-xenU.img"
> memory = "128"
> ~~~~
> name = "vm1"
> disk = [ 'file:/xen/vm1.img,sda1,w' ]
> vif = [ '' ]
> root = "/dev/sda1 ro"
> on_xend_stop = "suspend"
> extra = "3 xencons=tty"
> access_control = ['policy=example.client_v1,label=dom_HomeBanking']
>
> #cat vm4.conf
> kernel = "/boot/vmlinuz-2.6.18-xen"
> ramdisk = "/boot/initrd-2.6.18-xenU.img"
> memory = "128"
> ~~~~~
> name = "vm4"
> disk = [ 'file:/xen/vm4.img,sda1,w']
> vif = [ '' ]
> root = "/dev/sda1 ro"
> on_xend_stop = "suspend"
> extra = "3"
> access_control = ['policy=example.client_v1,label=dom_Fun']
>
>
> #xm dumppolicy
> Policy dump:
> ============
> POLICY REFERENCE = example.client_v1.
> PolicyVer = 0.
> XML Vers. = 1.0
> Magic = 1debc.
> Len = 198.
> Primary = CHINESE WALL (c=1, off=40).
> Secondary = SIMPLE TYPE ENFORCEMENT (c=2, off=b8).
>
>
> Chinese Wall policy:
> ====================
> Policy version= 0.
> Max Types = 4.
> Max Ssidrefs = 7.
> Max ConfSets = 1.
> Ssidrefs Off = 24.
> Conflicts Off = 5c.
> Runing T. Off = 64.
> C. Agg. Off = 6c.
>
> SSID To CHWALL-Type matrix:
>
> ssidref 0: 00 00 00 00
> ssidref 1: 00 00 00 01 <-- Domain-0
> ssidref 2: 00 01 00 00
> ssidref 3: 01 00 00 00
> ssidref 4: 00 00 01 00
> ssidref 5: 00 00 00 01
> ssidref 6: 00 00 00 01
>
> Confict Sets:
>
> c-set 0: 01 00 01 00
>
> Running
> Types: 00 00 00 01
>
> Conflict
> Aggregate Set: 00 00 00 00
>
>
> Simple Type Enforcement policy:
> ===============================
> Policy version= 0.
> Max Types = 6.
> Max Ssidrefs = 11.
> Ssidrefs Off = 14.
>
> SSID To STE-Type matrix:
>
> ssidref 0: 00 00 00 00 00 00
> ssidref 1: 01 01 01 01 01 01 <-- Domain-0
> ssidref 2: 01 00 00 00 00 00
> ssidref 3: 00 01 00 00 00 00
> ssidref 4: 00 00 00 00 01 00
> ssidref 5: 01 01 01 00 01 00
> ssidref 6: 00 01 00 01 01 00
> ssidref 7: 00 00 01 00 00 00
> ssidref 8: 00 00 00 00 00 01
> ssidref 9: 00 00 00 01 00 00
> ssidref a: 00 00 00 00 01 00
> ssidref b: 00 01 00 00 00 00
> ssidref c: 00 00 00 00 01 00
> ssidref d: 00 00 00 00 01 00
> ssidref e: 00 01 00 00 00 00
> ssidref f: 00 00 00 00 00 01
> ssidref10: 00 00 00 00 01 00
>
> Thanks,
>
> Syunsuke Hayashi.
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [XSM:ACM] When cw is used, dom0 reboots.
2007-09-25 3:02 [XSM:ACM] When cw is used, dom0 reboots Syunsuke HAYASHI
2007-09-25 22:48 ` George S. Coker, II
@ 2007-09-26 0:02 ` Stefan Berger
2007-09-26 2:12 ` Syunsuke HAYASHI
2007-09-27 16:44 ` George S. Coker, II
2 siblings, 1 reply; 5+ messages in thread
From: Stefan Berger @ 2007-09-26 0:02 UTC (permalink / raw)
To: Syunsuke HAYASHI; +Cc: xen-devel, Reiner Sailer
[-- Attachment #1.1: Type: text/plain, Size: 3274 bytes --]
Hello!
Which changeset of Xen are you trying this on? I just tried this on a
version before XSM was added and it worked fine (CS 15661).
Stefan
xen-devel-bounces@lists.xensource.com wrote on 09/24/2007 11:02:11 PM:
> Hi ,
>
> When cw is used, dom0 reboots.
> Though I set quest memory size.
>
> I want to study into the cause.
> Please teach how to examine it.
>
>
>
>
> #xm create vm1.conf <-- OK
> #xm create vm4.conf <-- NO
> ................... <-- system boot
>
> #last
> root pts/1 myPC Tue Sep 25 11:25 - crash (09:01)
> reboot system boot 2.6.18-xen Tue Sep 25 20:06 (-8:-16)
> ~~~~~~~~~~~
>
>
> ---------------about my setting--------------------
> Xen-api is effective.
>
>
> #cat vm1.conf
> kernel = "/boot/vmlinuz-2.6.18-xen"
> ramdisk = "/boot/initrd-2.6.18-xenU.img"
> memory = "128"
> ~~~~
> name = "vm1"
> disk = [ 'file:/xen/vm1.img,sda1,w' ]
> vif = [ '' ]
> root = "/dev/sda1 ro"
> on_xend_stop = "suspend"
> extra = "3 xencons=tty"
> access_control = ['policy=example.client_v1,label=dom_HomeBanking']
>
> #cat vm4.conf
> kernel = "/boot/vmlinuz-2.6.18-xen"
> ramdisk = "/boot/initrd-2.6.18-xenU.img"
> memory = "128"
> ~~~~~
> name = "vm4"
> disk = [ 'file:/xen/vm4.img,sda1,w']
> vif = [ '' ]
> root = "/dev/sda1 ro"
> on_xend_stop = "suspend"
> extra = "3"
> access_control = ['policy=example.client_v1,label=dom_Fun']
>
>
> #xm dumppolicy
> Policy dump:
> ============
> POLICY REFERENCE = example.client_v1.
> PolicyVer = 0.
> XML Vers. = 1.0
> Magic = 1debc.
> Len = 198.
> Primary = CHINESE WALL (c=1, off=40).
> Secondary = SIMPLE TYPE ENFORCEMENT (c=2, off=b8).
>
>
> Chinese Wall policy:
> ====================
> Policy version= 0.
> Max Types = 4.
> Max Ssidrefs = 7.
> Max ConfSets = 1.
> Ssidrefs Off = 24.
> Conflicts Off = 5c.
> Runing T. Off = 64.
> C. Agg. Off = 6c.
>
> SSID To CHWALL-Type matrix:
>
> ssidref 0: 00 00 00 00
> ssidref 1: 00 00 00 01 <-- Domain-0
> ssidref 2: 00 01 00 00
> ssidref 3: 01 00 00 00
> ssidref 4: 00 00 01 00
> ssidref 5: 00 00 00 01
> ssidref 6: 00 00 00 01
>
> Confict Sets:
>
> c-set 0: 01 00 01 00
>
> Running
> Types: 00 00 00 01
>
> Conflict
> Aggregate Set: 00 00 00 00
>
>
> Simple Type Enforcement policy:
> ===============================
> Policy version= 0.
> Max Types = 6.
> Max Ssidrefs = 11.
> Ssidrefs Off = 14.
>
> SSID To STE-Type matrix:
>
> ssidref 0: 00 00 00 00 00 00
> ssidref 1: 01 01 01 01 01 01 <-- Domain-0
> ssidref 2: 01 00 00 00 00 00
> ssidref 3: 00 01 00 00 00 00
> ssidref 4: 00 00 00 00 01 00
> ssidref 5: 01 01 01 00 01 00
> ssidref 6: 00 01 00 01 01 00
> ssidref 7: 00 00 01 00 00 00
> ssidref 8: 00 00 00 00 00 01
> ssidref 9: 00 00 00 01 00 00
> ssidref a: 00 00 00 00 01 00
> ssidref b: 00 01 00 00 00 00
> ssidref c: 00 00 00 00 01 00
> ssidref d: 00 00 00 00 01 00
> ssidref e: 00 01 00 00 00 00
> ssidref f: 00 00 00 00 00 01
> ssidref10: 00 00 00 00 01 00
>
> Thanks,
>
> Syunsuke Hayashi.
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
[-- Attachment #1.2: Type: text/html, Size: 5125 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [XSM:ACM] When cw is used, dom0 reboots.
2007-09-26 0:02 ` Stefan Berger
@ 2007-09-26 2:12 ` Syunsuke HAYASHI
0 siblings, 0 replies; 5+ messages in thread
From: Syunsuke HAYASHI @ 2007-09-26 2:12 UTC (permalink / raw)
To: xen-devel
Hi, Stefan.
I am trying XSM/ACM on CS 15880.
It is big information that XSM/ACM works fine on CS15661.
Thank you.
Then, is my setting only bad?
Please teach your setting.
(Config.mk, xm-config.xml,xend-config.sxp,guest.conf,.....etc)
The setting to use XSM/ACM is as follows.
1:Config.mk(Setting when installing xen)
81 # Enable XSM security module. Enabling XSM requires selection of an
82 # XSM security module (FLASK_ENABLE or ACM_SECURITY).
83 XSM_ENABLE ?= y <---- I wrote like this.
~~~~
84 FLASK_ENABLE ?= n
85 ACM_SECURITY ?= y <---- I wrote like this.
~~~~
86
87 # Optional components
88 XENSTAT_XENTOP ?= y
89 VTPM_TOOLS ?= n
90 LIBXENAPI_BINDINGS ?= n
91 XENFB_TOOLS ?= n
92 PYTHON_TOOLS ?= y
2:xend-config-xenapi.sxp
54 # Default:
55 # (xen-api-server ((unix)))
56 (xen-api-server ((9363 none))) <---- I wrote like this.
3:xm-config.xml
43 <server type='Xen-API'
44 uri='http://localhost:9363/'
45 username='me'
46 password='mypassword' />
47
48
49
50 </xm>
Syunsuke HAYASHI.
>
> Hello!
>
> Which changeset of Xen are you trying this on? I just tried this on a
> version before XSM was added and it worked fine (CS 15661).
>
> Stefan
>
>
>
> xen-devel-bounces@lists.xensource.com wrote on 09/24/2007 11:02:11 PM:
>
> > Hi ,
> >
> > When cw is used, dom0 reboots.
> > Though I set quest memory size.
> >
> > I want to study into the cause.
> > Please teach how to examine it.
> >
> >
> >
> >
> > #xm create vm1.conf <-- OK
> > #xm create vm4.conf <-- NO
> > ................... <-- system boot
> >
> > #last
> > root pts/1 myPC Tue Sep 25 11:25 - crash (09:01)
> > reboot system boot 2.6.18-xen Tue Sep 25 20:06 (-8:-16)
> > ~~~~~~~~~~~
> >
> >
> > ---------------about my setting--------------------
> > Xen-api is effective.
> >
> >
> > #cat vm1.conf
> > kernel = "/boot/vmlinuz-2.6.18-xen"
> > ramdisk = "/boot/initrd-2.6.18-xenU.img"
> > memory = "128"
> > ~~~~
> > name = "vm1"
> > disk = [ 'file:/xen/vm1.img,sda1,w' ]
> > vif = [ '' ]
> > root = "/dev/sda1 ro"
> > on_xend_stop = "suspend"
> > extra = "3 xencons=tty"
> > access_control = ['policy=example.client_v1,label=dom_HomeBanking']
> >
> > #cat vm4.conf
> > kernel = "/boot/vmlinuz-2.6.18-xen"
> > ramdisk = "/boot/initrd-2.6.18-xenU.img"
> > memory = "128"
> > ~~~~~
> > name = "vm4"
> > disk = [ 'file:/xen/vm4.img,sda1,w']
> > vif = [ '' ]
> > root = "/dev/sda1 ro"
> > on_xend_stop = "suspend"
> > extra = "3"
> > access_control = ['policy=example.client_v1,label=dom_Fun']
> >
> >
> > #xm dumppolicy
> > Policy dump:
> > ============
> > POLICY REFERENCE = example.client_v1.
> > PolicyVer = 0.
> > XML Vers. = 1.0
> > Magic = 1debc.
> > Len = 198.
> > Primary = CHINESE WALL (c=1, off=40).
> > Secondary = SIMPLE TYPE ENFORCEMENT (c=2, off=b8).
> >
> >
> > Chinese Wall policy:
> > ====================
> > Policy version= 0.
> > Max Types = 4.
> > Max Ssidrefs = 7.
> > Max ConfSets = 1.
> > Ssidrefs Off = 24.
> > Conflicts Off = 5c.
> > Runing T. Off = 64.
> > C. Agg. Off = 6c.
> >
> > SSID To CHWALL-Type matrix:
> >
> > ssidref 0: 00 00 00 00
> > ssidref 1: 00 00 00 01 <-- Domain-0
> > ssidref 2: 00 01 00 00
> > ssidref 3: 01 00 00 00
> > ssidref 4: 00 00 01 00
> > ssidref 5: 00 00 00 01
> > ssidref 6: 00 00 00 01
> >
> > Confict Sets:
> >
> > c-set 0: 01 00 01 00
> >
> > Running
> > Types: 00 00 00 01
> >
> > Conflict
> > Aggregate Set: 00 00 00 00
> >
> >
> > Simple Type Enforcement policy:
> > ===============================
> > Policy version= 0.
> > Max Types = 6.
> > Max Ssidrefs = 11.
> > Ssidrefs Off = 14.
> >
> > SSID To STE-Type matrix:
> >
> > ssidref 0: 00 00 00 00 00 00
> > ssidref 1: 01 01 01 01 01 01 <-- Domain-0
> > ssidref 2: 01 00 00 00 00 00
> > ssidref 3: 00 01 00 00 00 00
> > ssidref 4: 00 00 00 00 01 00
> > ssidref 5: 01 01 01 00 01 00
> > ssidref 6: 00 01 00 01 01 00
> > ssidref 7: 00 00 01 00 00 00
> > ssidref 8: 00 00 00 00 00 01
> > ssidref 9: 00 00 00 01 00 00
> > ssidref a: 00 00 00 00 01 00
> > ssidref b: 00 01 00 00 00 00
> > ssidref c: 00 00 00 00 01 00
> > ssidref d: 00 00 00 00 01 00
> > ssidref e: 00 01 00 00 00 00
> > ssidref f: 00 00 00 00 00 01
> > ssidref10: 00 00 00 00 01 00
> >
> > Thanks,
> >
> > Syunsuke Hayashi.
> >
> >
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@lists.xensource.com
> > http://lists.xensource.com/xen-devel
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [XSM:ACM] When cw is used, dom0 reboots.
2007-09-25 3:02 [XSM:ACM] When cw is used, dom0 reboots Syunsuke HAYASHI
2007-09-25 22:48 ` George S. Coker, II
2007-09-26 0:02 ` Stefan Berger
@ 2007-09-27 16:44 ` George S. Coker, II
2 siblings, 0 replies; 5+ messages in thread
From: George S. Coker, II @ 2007-09-27 16:44 UTC (permalink / raw)
To: Syunsuke HAYASHI; +Cc: xen-devel
This is a null dereference bug in ACM. I've just posted a patch to
Xen-devel.
George
On Tue, 2007-09-25 at 12:02 +0900, Syunsuke HAYASHI wrote:
> Hi ,
>
> When cw is used, dom0 reboots.
> Though I set quest memory size.
>
> I want to study into the cause.
> Please teach how to examine it.
>
>
>
>
> #xm create vm1.conf <-- OK
> #xm create vm4.conf <-- NO
> ................... <-- system boot
>
> #last
> root pts/1 myPC Tue Sep 25 11:25 - crash (09:01)
> reboot system boot 2.6.18-xen Tue Sep 25 20:06 (-8:-16)
> ~~~~~~~~~~~
>
>
> ---------------about my setting--------------------
> Xen-api is effective.
>
>
> #cat vm1.conf
> kernel = "/boot/vmlinuz-2.6.18-xen"
> ramdisk = "/boot/initrd-2.6.18-xenU.img"
> memory = "128"
> ~~~~
> name = "vm1"
> disk = [ 'file:/xen/vm1.img,sda1,w' ]
> vif = [ '' ]
> root = "/dev/sda1 ro"
> on_xend_stop = "suspend"
> extra = "3 xencons=tty"
> access_control = ['policy=example.client_v1,label=dom_HomeBanking']
>
> #cat vm4.conf
> kernel = "/boot/vmlinuz-2.6.18-xen"
> ramdisk = "/boot/initrd-2.6.18-xenU.img"
> memory = "128"
> ~~~~~
> name = "vm4"
> disk = [ 'file:/xen/vm4.img,sda1,w']
> vif = [ '' ]
> root = "/dev/sda1 ro"
> on_xend_stop = "suspend"
> extra = "3"
> access_control = ['policy=example.client_v1,label=dom_Fun']
>
>
> #xm dumppolicy
> Policy dump:
> ============
> POLICY REFERENCE = example.client_v1.
> PolicyVer = 0.
> XML Vers. = 1.0
> Magic = 1debc.
> Len = 198.
> Primary = CHINESE WALL (c=1, off=40).
> Secondary = SIMPLE TYPE ENFORCEMENT (c=2, off=b8).
>
>
> Chinese Wall policy:
> ====================
> Policy version= 0.
> Max Types = 4.
> Max Ssidrefs = 7.
> Max ConfSets = 1.
> Ssidrefs Off = 24.
> Conflicts Off = 5c.
> Runing T. Off = 64.
> C. Agg. Off = 6c.
>
> SSID To CHWALL-Type matrix:
>
> ssidref 0: 00 00 00 00
> ssidref 1: 00 00 00 01 <-- Domain-0
> ssidref 2: 00 01 00 00
> ssidref 3: 01 00 00 00
> ssidref 4: 00 00 01 00
> ssidref 5: 00 00 00 01
> ssidref 6: 00 00 00 01
>
> Confict Sets:
>
> c-set 0: 01 00 01 00
>
> Running
> Types: 00 00 00 01
>
> Conflict
> Aggregate Set: 00 00 00 00
>
>
> Simple Type Enforcement policy:
> ===============================
> Policy version= 0.
> Max Types = 6.
> Max Ssidrefs = 11.
> Ssidrefs Off = 14.
>
> SSID To STE-Type matrix:
>
> ssidref 0: 00 00 00 00 00 00
> ssidref 1: 01 01 01 01 01 01 <-- Domain-0
> ssidref 2: 01 00 00 00 00 00
> ssidref 3: 00 01 00 00 00 00
> ssidref 4: 00 00 00 00 01 00
> ssidref 5: 01 01 01 00 01 00
> ssidref 6: 00 01 00 01 01 00
> ssidref 7: 00 00 01 00 00 00
> ssidref 8: 00 00 00 00 00 01
> ssidref 9: 00 00 00 01 00 00
> ssidref a: 00 00 00 00 01 00
> ssidref b: 00 01 00 00 00 00
> ssidref c: 00 00 00 00 01 00
> ssidref d: 00 00 00 00 01 00
> ssidref e: 00 01 00 00 00 00
> ssidref f: 00 00 00 00 00 01
> ssidref10: 00 00 00 00 01 00
>
> Thanks,
>
> Syunsuke Hayashi.
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
--
George S. Coker, II <gscoker@alpha.ncsc.mil> 443-479-6944
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2007-09-27 16:44 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-09-25 3:02 [XSM:ACM] When cw is used, dom0 reboots Syunsuke HAYASHI
2007-09-25 22:48 ` George S. Coker, II
2007-09-26 0:02 ` Stefan Berger
2007-09-26 2:12 ` Syunsuke HAYASHI
2007-09-27 16:44 ` George S. Coker, II
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.