From: Pierre-Yves Paulus <py@idlum.be>
To: linux-kernel@vger.kernel.org
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>,
BlueZ development <bluez-devel@lists.sourceforge.net>,
Chuck Ebbert <cebbert@redhat.com>
Subject: Re: [Bluez-devel] Warnings and Oops on 2.6.23-rc6 while activily using rfcomm links (mm/slab.c)
Date: Thu, 27 Sep 2007 20:07:54 +0200 [thread overview]
Message-ID: <46FBF17A.6030009@idlum.be> (raw)
In-Reply-To: <46FBC1AE.4020404@idlum.be>
Hello,
>>>> Please use CONFIG_SLUB and turn on SLUB debugging. Something is very =
>>>> wrong
>>>> somewhere...
>>> I did so, on 2.6.23-rc8. I also did include CONFIG_DEBUG_DRIVER and =
>>> CONFIG_DEBUG_KOBJECT, following Cornelia Huck's advice.
>>
>> Did you see any messages (from the driver core) surrounding
>> kobject_move() usage or the kref badness messages? I'm asking because
>> refcounting/lifetime issues may be the reason for your problems...
> =
> I just figured out how to get KERN_DEBUG to the serial console for =
> capture...
Another one below, complete log from power-up to reboot, with some bugs =
and one Oops. I only trimmed the numerous "l2cap_recv_acldata" and "ACL =
packet for unknown connection handle" lines which always fill up the log.
=FE=C0Linux version 2.6.23-rc8 (root@p2a) (gcc version 4.1.2 20061115 =
(prerelease) (Debian 4.1.1-21)) #3 Wed Sep 26 09:19:06 UTC 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000f7b0000 (usable)
BIOS-e820: 000000000f7b0000 - 000000000f7b3000 (ACPI NVS)
BIOS-e820: 000000000f7b3000 - 000000000f7c0000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
247MB LOWMEM available.
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 63408
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 63408
DMI 2.2 present.
ACPI: RSDP 000F63C0, 0014 (r0 AMDGX3)
ACPI: RSDT 0F7B3040, 0028 (r1 AMDGX3 AWRDACPI 42302E31 AWRD 0)
ACPI: FACP 0F7B30C0, 0074 (r1 AMDGX3 AWRDACPI 42302E31 AWRD 0)
ACPI: DSDT 0F7B3180, 35BD (r1 AMDGX3 AWRDACPI 1000 MSFT 100000E)
ACPI: FACS 0F7B0000, 0040
ACPI: PM-Timer IO Port: 0x9c10
Allocating PCI resources starting at 10000000 (gap: 0f7c0000:f0830000)
swsusp: Registered nosave memory region: 000000000009e000 - 000000000009f000
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Built 1 zonelists in Zone order. Total pages: 62913
Kernel command line: root=3DUUID=3Dc925de24-972b-437c-860f-8109d900aa4b ro =
panic=3D60 console=3DttyS1,38400 console=3Dtty0 slub_debug
No local APIC present or hardware disabled
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 498.062 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS1] enabled
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 243152k/253632k available (1704k kernel code, 9908k reserved, =
681k data, 312k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffb3000 - 0xfffff000 ( 304 kB)
vmalloc : 0xd0000000 - 0xfffb1000 ( 767 MB)
lowmem : 0xc0000000 - 0xcf7b0000 ( 247 MB)
.init : 0xc0358000 - 0xc03a6000 ( 312 kB)
.data : 0xc02aa395 - 0xc0354aa4 ( 681 kB)
.text : 0xc0100000 - 0xc02aa395 (1704 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=3D22, HWalign=3D32, Order=3D0-1, MinObjects=3D4, CPUs=3D1, N=
odes=3D1
Calibrating delay using timer specific routine.. 997.65 BogoMIPS =
(lpj=3D1995305)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 128K (32 bytes/line)
Compat vDSO mapped to ffffe000.
CPU: AMD Geode(TM) Integrated Processor by AMD PCS stepping 02
Checking 'hlt' instruction... OK.
ACPI: Core revision 20070126
ACPI: setting ELCR to 0200 (from 0c00)
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfa740, last bus=3D0
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=3Drouteirq". If it helps, post a =
report
NET: Registered protocol family 8
NET: Registered protocol family 20
Time: tsc clocksource has been installed.
ACPI: RTC can wake from S4
pnp: 00:00: iomem range 0xf0000-0xf3fff could not be reserved
pnp: 00:00: iomem range 0xf4000-0xf7fff could not be reserved
pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
checking if image is initramfs...<6>Switched to high resolution mode on =
CPU 0
it is
Freeing initrd memory: 4716k freed
audit: initializing netlink socket (disabled)
audit(1190905112.522:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq =3D 3) is a 16550A
serial8250: ttyS2 at I/O 0x3e8 (irq =3D 4) is a 16550A
serial8250: ttyS3 at I/O 0x2e8 (irq =3D 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq =3D 3) is a 16550A
00:0b: ttyS2 at I/O 0x3e8 (irq =3D 5) is a 16550A
00:0c: ttyS3 at I/O 0x2e8 (irq =3D 5) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 6
EISA: Detected 0 cards.
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 312k freed
SCSI subsystem initialized
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt Link [LNKC] BIOS reported IRQ 0, using IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] -> GSI 11 (level, =
low) -> IRQ 11
eth0: RealTek RTL8139 at 0xf200, 00:04:5f:85:78:91, IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNKB] -> GSI 11 (level, =
low) -> IRQ 11
eth1: RealTek RTL8139 at 0xf600, 00:04:5f:85:78:92, IRQ 11
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
ACPI: PCI Interrupt Link [LNKD] BIOS reported IRQ 0, using IRQ 10
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKD] -> GSI 10 (level, =
low) -> IRQ 10
sata_via 0000:00:0a.0: routed to hard irq line 11
usbcore: registered new device driver usb
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D=
xx
scsi0 : sata_via
scsi1 : sata_via
scsi2 : sata_via
ata1: SATA max UDMA/133 cmd 0x0001ff00 ctl 0x0001ff0a bmdma 0x0001fb00 =
irq 10
ata2: SATA max UDMA/133 cmd 0x0001fe00 ctl 0x0001fe0a bmdma 0x0001fb08 =
irq 10
ata3: PATA max UDMA/133 cmd 0x0001fd00 ctl 0x0001fd0a bmdma 0x0001fb10 =
irq 10
ata1: SATA link down (SStatus 0 SControl 310)
ata2: SATA link down (SStatus 0 SControl 310)
ACPI: PCI Interrupt 0000:00:0f.4[D] -> Link [LNKD] -> GSI 10 (level, =
low) -> IRQ 10
ohci_hcd 0000:00:0f.4: OHCI Host Controller
ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0f.4: irq 10, io mem 0xefffd000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
AMD5536: IDE controller at PCI slot 0000:00:0f.2
AMD5536: chipset revision 1
AMD5536: not 100% native mode: will probe irqs later
AMD5536: 0000:00:0f.2 (rev 01) UDMA100 controller
ide0: BM-DMA at 0xfa00-0xfa07, BIOS settings: hda:DMA, hdb:pio
usb 1-1: new full speed USB device using ohci_hcd and address 2
hda: PQI IDE DiskOnModule, ATA DISK drive
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 7 ports detected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
usb 1-1.4: new full speed USB device using ohci_hcd and address 3
hda: max request size: 128KiB
hda: 4062240 sectors (2079 MB) w/0KiB Cache, CHS=3D4030/16/63, UDMA(33)
hda: hda1 hda2 < hda5 hda6 >
usb 1-1.4: configuration #1 chosen from 1 choice
hub 1-1.4:1.0: USB hub found
hub 1-1.4:1.0: 3 ports detected
usb 1-1.5: new full speed USB device using ohci_hcd and address 4
usb 1-1.5: configuration #1 chosen from 1 choice
hub 1-1.5:1.0: USB hub found
hub 1-1.5:1.0: 3 ports detected
usb 1-1.2: new full speed USB device using ohci_hcd and address 5
usb 1-1.2: configuration #1 chosen from 1 choice
usb 1-1.4.2: new full speed USB device using ohci_hcd and address 6
usb 1-1.4.2: configuration #1 chosen from 1 choice
usb 1-1.4.3: new full speed USB device using ohci_hcd and address 7
usb 1-1.4.3: configuration #1 chosen from 1 choice
usb 1-1.5.2: new full speed USB device using ohci_hcd and address 8
usb 1-1.5.2: configuration #1 chosen from 1 choice
usb 1-1.5.3: new full speed USB device using ohci_hcd and address 9
usb 1-1.5.3: configuration #1 chosen from 1 choice
usb 1-1.4.1: new full speed USB device using ohci_hcd and address 10
usb 1-1.4.1: configuration #1 chosen from 1 choice
usb 1-1.5.1: new full speed USB device using ohci_hcd and address 11
usb 1-1.5.1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: HID 0a5c:4502 as /class/input/input0
input: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:0f.4-1.4.2
input: HID 0a5c:4503 as /class/input/input1
input: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:0f.4-1.4.3
input: HID 0a5c:4502 as /class/input/input2
input: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:0f.4-1.5.2
input: HID 0a5c:4503 as /class/input/input3
input: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:0f.4-1.5.3
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
ReiserFS: hda6: found reiserfs format "3.6" with standard journal
ReiserFS: hda6: using ordered data mode
ReiserFS: hda6: journal params: device hda6, size 8192, journal first =
block 18, max trans len 1024, max batch 900, max commit age 30, max =
trans age 30
ReiserFS: hda6: checking transaction log (hda6)
ReiserFS: hda6: Using r5 hash to sort names
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:01.2[A] -> Link [LNKA] -> GSI 10 (level, =
low) -> IRQ 10
geode-aes: GEODE AES engine enabled.
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
AMD Geode RNG detected
ACPI: PCI Interrupt 0000:00:0f.3[B] -> Link [LNKB] -> GSI 11 (level, =
low) -> IRQ 11
input: Power Button (FF) as /class/input/input4
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input5
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input6
ACPI: Sleep Button (CM) [SLPB]
ACPI: AC Adapter [AC] (on-line)
Real Time Clock Driver v1.12ac
input: PC Speaker as /class/input/input7
FDC 0 is a post-1991 82077
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Adding 264560k swap on /dev/hda5. Priority:-1 extents:1 across:264560k
loop: module loaded
Software Watchdog Timer: 0.07 initialized. soft_noboot=3D0 soft_margin=3D60 =
sec (nowayout=3D 0)
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: =
dm-devel@redhat.com
eth0: link down
eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
kobject l2cap: registering. parent: <NULL>, set: module
kobject holders: registering. parent: l2cap, set: <NULL>
kobject_uevent_env
kobject filter function caused the event to drop!
kobject_uevent_env
fill_kobj_path: path =3D '/module/l2cap'
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
DEV: registering device: ID =3D 'acl00E0033364E5'
kobject acl00E0033364E5: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl00E0033364E5
bus bluetooth: add device acl00E0033364E5
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00E0033364E5'
DEV: registering device: ID =3D 'acl0060574FEB37'
kobject acl0060574FEB37: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl0060574FEB37
bus bluetooth: add device acl0060574FEB37
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl0060574FEB37'
DEV: registering device: ID =3D 'acl000AD9D7A99A'
kobject acl000AD9D7A99A: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl000AD9D7A99A
bus bluetooth: add device acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl000AD9D7A99A'
bus bluetooth: remove device acl00E0033364E5
PM: Removing info for bluetooth:acl00E0033364E5
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00E0033364E5'
kobject acl00E0033364E5: cleaning up
bus bluetooth: remove device acl0060574FEB37
PM: Removing info for bluetooth:acl0060574FEB37
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl0060574FEB37'
kobject acl0060574FEB37: cleaning up
kobject rfcomm: registering. parent: <NULL>, set: module
kobject holders: registering. parent: rfcomm, set: <NULL>
kobject_uevent_env
kobject filter function caused the event to drop!
kobject_uevent_env
fill_kobj_path: path =3D '/module/rfcomm'
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
bus bluetooth: remove device acl000AD9D7A99A
PM: Removing info for bluetooth:acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl000AD9D7A99A'
kobject acl000AD9D7A99A: cleaning up
DEV: registering device: ID =3D 'acl000AD9D7A99A'
kobject acl000AD9D7A99A: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl000AD9D7A99A
bus bluetooth: add device acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl000AD9D7A99A'
bus bluetooth: remove device acl000AD9D7A99A
PM: Removing info for bluetooth:acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl000AD9D7A99A'
kobject acl000AD9D7A99A: cleaning up
DEV: registering device: ID =3D 'acl0017B066F14B'
kobject acl0017B066F14B: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl0017B066F14B
bus bluetooth: add device acl0017B066F14B
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl0017B066F14B'
bus bluetooth: remove device acl0017B066F14B
PM: Removing info for bluetooth:acl0017B066F14B
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl0017B066F14B'
kobject acl0017B066F14B: cleaning up
DEV: registering device: ID =3D 'acl006057BB4D92'
kobject acl006057BB4D92: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl006057BB4D92
bus bluetooth: add device acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl006057BB4D92'
DEV: registering device: ID =3D 'acl00126253F906'
kobject acl00126253F906: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl00126253F906
bus bluetooth: add device acl00126253F906
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00126253F906'
DEV: registering device: ID =3D 'acl00E0033364E5'
kobject acl00E0033364E5: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl00E0033364E5
bus bluetooth: add device acl00E0033364E5
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00E0033364E5'
bus bluetooth: remove device acl006057BB4D92
PM: Removing info for bluetooth:acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl006057BB4D92'
kobject acl006057BB4D92: cleaning up
bus bluetooth: remove device acl00126253F906
PM: Removing info for bluetooth:acl00126253F906
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00126253F906'
kobject acl00126253F906: cleaning up
DEV: registering device: ID =3D 'acl0060574FEB37'
kobject acl0060574FEB37: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl0060574FEB37
bus bluetooth: add device acl0060574FEB37
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl0060574FEB37'
DEV: registering device: ID =3D 'acl000AD9D7A99A'
kobject acl000AD9D7A99A: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl000AD9D7A99A
bus bluetooth: add device acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl000AD9D7A99A'
DEV: registering device: ID =3D 'rfcomm0'
kobject rfcomm0: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm0
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm0'
DEVICE: moving 'rfcomm0' to 'acl000AD9D7A99A'
fill_kobj_path: path =3D '/class/tty/rfcomm0'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm0'
DEV: registering device: ID =3D 'acl0017B066F14B'
kobject acl0017B066F14B: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl0017B066F14B
bus bluetooth: add device acl0017B066F14B
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl0017B066F14B'
bus bluetooth: remove device acl0017B066F14B
PM: Removing info for bluetooth:acl0017B066F14B
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl0017B066F14B'
kobject acl0017B066F14B: cleaning up
DEV: registering device: ID =3D 'acl0017B066F14B'
kobject acl0017B066F14B: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl0017B066F14B
bus bluetooth: add device acl0017B066F14B
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl0017B066F14B'
bus bluetooth: remove device acl00E0033364E5
PM: Removing info for bluetooth:acl00E0033364E5
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00E0033364E5'
kobject acl00E0033364E5: cleaning up
bus bluetooth: remove device acl000AD9D7A99A
PM: Removing info for bluetooth:acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl000AD9D7A99A'
DEVICE: moving 'rfcomm0' to '<NULL>'
fill_kobj_path: path =3D '/class/tty/rfcomm0'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm0'
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl000AD9D7A99A'
kobject acl000AD9D7A99A: cleaning up
DEV: Unregistering device. ID =3D 'rfcomm0'
PM: Removing info for No Bus:rfcomm0
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm0'
kobject rfcomm0: cleaning up
device_create_release called for rfcomm0
DEV: registering device: ID =3D 'acl006057BB4D92'
kobject acl006057BB4D92: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl006057BB4D92
bus bluetooth: add device acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl006057BB4D92'
DEV: registering device: ID =3D 'acl00E0033364E5'
kobject acl00E0033364E5: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl00E0033364E5
bus bluetooth: add device acl00E0033364E5
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00E0033364E5'
bus bluetooth: remove device acl0060574FEB37
PM: Removing info for bluetooth:acl0060574FEB37
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl0060574FEB37'
kobject acl0060574FEB37: cleaning up
DEV: registering device: ID =3D 'acl00126253F906'
kobject acl00126253F906: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl00126253F906
bus bluetooth: add device acl00126253F906
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00126253F906'
DEV: registering device: ID =3D 'acl0060574FEB37'
kobject acl0060574FEB37: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl0060574FEB37
bus bluetooth: add device acl0060574FEB37
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl0060574FEB37'
DEV: registering device: ID =3D 'acl000AD9D7A99A'
kobject acl000AD9D7A99A: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl000AD9D7A99A
bus bluetooth: add device acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl000AD9D7A99A'
DEV: registering device: ID =3D 'rfcomm0'
kobject rfcomm0: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm0
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm0'
DEVICE: moving 'rfcomm0' to 'acl0060574FEB37'
fill_kobj_path: path =3D '/class/tty/rfcomm0'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm0'
DEV: registering device: ID =3D 'rfcomm1'
kobject rfcomm1: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm1
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm1'
DEVICE: moving 'rfcomm1' to 'acl00E0033364E5'
fill_kobj_path: path =3D '/class/tty/rfcomm1'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm1'
DEV: registering device: ID =3D 'rfcomm2'
kobject rfcomm2: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm2
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm2'
DEVICE: moving 'rfcomm2' to 'acl0017B066F14B'
fill_kobj_path: path =3D '/class/tty/rfcomm2'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm2'
bus bluetooth: remove device acl000AD9D7A99A
PM: Removing info for bluetooth:acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl000AD9D7A99A'
kobject acl000AD9D7A99A: cleaning up
DEV: registering device: ID =3D 'rfcomm3'
kobject rfcomm3: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm3
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm3'
DEVICE: moving 'rfcomm3' to 'acl006057BB4D92'
fill_kobj_path: path =3D '/class/tty/rfcomm3'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm3'
hcidump[3694]: segfault at 0809ee89 eip 0805f3c7 esp bff25290 error 4
DEV: registering device: ID =3D 'rfcomm4'
kobject rfcomm4: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm4
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm4'
DEVICE: moving 'rfcomm4' to 'acl00126253F906'
fill_kobj_path: path =3D '/class/tty/rfcomm4'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm4'
hcidump[3699]: segfault at 080a8c48 eip 0805f3c7 esp bfcef4e0 error 4
DEVICE: moving 'rfcomm3' to '<NULL>'
fill_kobj_path: path =3D '/class/tty/rfcomm3'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm3'
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl006057BB4D92'
DEV: Unregistering device. ID =3D 'rfcomm3'
PM: Removing info for No Bus:rfcomm3
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm3'
kobject rfcomm3: cleaning up
device_create_release called for rfcomm3
bus bluetooth: remove device acl006057BB4D92
PM: Removing info for bluetooth:acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl006057BB4D92'
kobject acl006057BB4D92: cleaning up
bus bluetooth: remove device acl00126253F906
PM: Removing info for bluetooth:acl00126253F906
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00126253F906'
DEVICE: moving 'rfcomm4' to '<NULL>'
fill_kobj_path: path =3D '/class/tty/rfcomm4'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm4'
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00126253F906'
kobject acl00126253F906: cleaning up
DEV: Unregistering device. ID =3D 'rfcomm4'
PM: Removing info for No Bus:rfcomm4
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm4'
kobject rfcomm4: cleaning up
device_create_release called for rfcomm4
DEV: registering device: ID =3D 'acl000AD9D7A99A'
kobject acl000AD9D7A99A: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl000AD9D7A99A
bus bluetooth: add device acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl000AD9D7A99A'
DEV: registering device: ID =3D 'acl006057BB4D92'
kobject acl006057BB4D92: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl006057BB4D92
bus bluetooth: add device acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl006057BB4D92'
bus bluetooth: remove device acl000AD9D7A99A
PM: Removing info for bluetooth:acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl000AD9D7A99A'
kobject acl000AD9D7A99A: cleaning up
DEV: registering device: ID =3D 'acl000AD9D7A99A'
kobject acl000AD9D7A99A: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl000AD9D7A99A
bus bluetooth: add device acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl000AD9D7A99A'
bus bluetooth: remove device acl006057BB4D92
PM: Removing info for bluetooth:acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl006057BB4D92'
kobject acl006057BB4D92: cleaning up
DEV: registering device: ID =3D 'acl006057BB4D92'
kobject acl006057BB4D92: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl006057BB4D92
bus bluetooth: add device acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl006057BB4D92'
bus bluetooth: remove device acl000AD9D7A99A
PM: Removing info for bluetooth:acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl000AD9D7A99A'
kobject acl000AD9D7A99A: cleaning up
DEV: registering device: ID =3D 'acl000AD9D7A99A'
kobject acl000AD9D7A99A: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl000AD9D7A99A
bus bluetooth: add device acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl000AD9D7A99A'
DEV: registering device: ID =3D 'rfcomm3'
kobject rfcomm3: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm3
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm3'
DEVICE: moving 'rfcomm3' to 'acl006057BB4D92'
fill_kobj_path: path =3D '/class/tty/rfcomm3'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm3'
bus bluetooth: remove device acl000AD9D7A99A
PM: Removing info for bluetooth:acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl000AD9D7A99A'
kobject acl000AD9D7A99A: cleaning up
DEV: registering device: ID =3D 'acl00126253F906'
kobject acl00126253F906: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl00126253F906
bus bluetooth: add device acl00126253F906
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00126253F906'
bus bluetooth: remove device acl00126253F906
PM: Removing info for bluetooth:acl00126253F906
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00126253F906'
kobject acl00126253F906: cleaning up
DEV: registering device: ID =3D 'acl00126253F906'
kobject acl00126253F906: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl00126253F906
bus bluetooth: add device acl00126253F906
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00126253F906'
bus bluetooth: remove device acl0017B066F14B
PM: Removing info for bluetooth:acl0017B066F14B
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl0017B066F14B'
DEVICE: moving 'rfcomm2' to '<NULL>'
fill_kobj_path: path =3D '/class/tty/rfcomm2'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm2'
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl0017B066F14B'
kobject acl0017B066F14B: cleaning up
DEV: Unregistering device. ID =3D 'rfcomm2'
PM: Removing info for No Bus:rfcomm2
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm2'
kobject rfcomm2: cleaning up
device_create_release called for rfcomm2
DEV: registering device: ID =3D 'acl000AD9D7A99A'
kobject acl000AD9D7A99A: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl000AD9D7A99A
bus bluetooth: add device acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl000AD9D7A99A'
bus bluetooth: remove device acl00E0033364E5
PM: Removing info for bluetooth:acl00E0033364E5
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00E0033364E5'
DEV: registering device: ID =3D 'rfcomm2'
kobject rfcomm2: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm2
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm2'
DEVICE: moving 'rfcomm2' to 'acl00126253F906'
fill_kobj_path: path =3D '/class/tty/rfcomm2'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm2'
bus bluetooth: remove device acl000AD9D7A99A
PM: Removing info for bluetooth:acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl000AD9D7A99A'
kobject acl000AD9D7A99A: cleaning up
DEV: registering device: ID =3D 'acl000AD9D7A99A'
kobject acl000AD9D7A99A: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl000AD9D7A99A
bus bluetooth: add device acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl000AD9D7A99A'
DEV: registering device: ID =3D 'rfcomm4'
kobject rfcomm4: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm4
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm4'
DEVICE: moving 'rfcomm4' to 'acl000AD9D7A99A'
fill_kobj_path: path =3D '/class/tty/rfcomm4'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm4'
DEVICE: moving 'rfcomm1' to '<NULL>'
fill_kobj_path: path =3D '/class/tty/rfcomm1'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm1'
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00E0033364E5'
kobject acl00E0033364E5: cleaning up
DEV: Unregistering device. ID =3D 'rfcomm1'
PM: Removing info for No Bus:rfcomm1
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm1'
kobject rfcomm1: cleaning up
device_create_release called for rfcomm1
bus bluetooth: remove device acl00126253F906
PM: Removing info for bluetooth:acl00126253F906
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00126253F906'
DEV: Unregistering device. ID =3D 'rfcomm2'
PM: Removing info for No Bus:rfcomm2
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm2'
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00126253F906'
kobject acl00126253F906: cleaning up
kobject rfcomm2: cleaning up
device_create_release called for rfcomm2
DEV: registering device: ID =3D 'acl00126253F906'
kobject acl00126253F906: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl00126253F906
bus bluetooth: add device acl00126253F906
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00126253F906'
bus bluetooth: remove device acl00126253F906
PM: Removing info for bluetooth:acl00126253F906
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00126253F906'
kobject acl00126253F906: cleaning up
DEV: registering device: ID =3D 'acl00126253F906'
kobject acl00126253F906: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl00126253F906
bus bluetooth: add device acl00126253F906
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00126253F906'
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D
BUG kmalloc-128: Poison overwritten
---------------------------------------------------------------------------=
--
INFO: 0xc5734f28-0xc5734f40. First byte 0x6a instead of 0x6b
INFO: Allocated in rfcomm_dev_ioctl+0xbd/0x4e6 [rfcomm] age=3D6110 cpu=3D0 =
pid=3D3677
INFO: Freed in rfcomm_dev_destruct+0x59/0x65 [rfcomm] age=3D3157 cpu=3D0 =
pid=3D3927
INFO: Slab 0xc10ae680 used=3D21 fp=3D0xc5734f20 flags=3D0x400000c2
INFO: Object 0xc5734f20 @offset=3D3872 fp=3D0xc57342c0
Bytes b4 0xc5734f10: 05 00 00 00 f8 23 0f 00 5a 5a 5a 5a 5a 5a 5a 5a =
....=F8#..ZZZZZZZZ
Object 0xc5734f20: 6b 6b 6b 6b 6b 6b 6b 6b 6a 6b 6b 6b 6b 6b 6b 6b =
kkkkkkkkjkkkkkkk
Object 0xc5734f30: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b =
kkkkkkkkkkkkkkkk
Object 0xc5734f40: 6a 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b =
jkkkkkkkkkkkkkkk
Object 0xc5734f50: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b =
kkkkkkkkkkkkkkkk
Object 0xc5734f60: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b =
kkkkkkkkkkkkkkkk
Object 0xc5734f70: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b =
kkkkkkkkkkkkkkkk
Object 0xc5734f80: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b =
kkkkkkkkkkkkkkkk
Object 0xc5734f90: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 =
kkkkkkkkkkkkkkk=A5
Redzone 0xc5734fa0: bb bb bb bb =
=BB=BB=BB=BB
Padding 0xc5734fc8: 5a 5a 5a 5a 5a 5a 5a 5a =
ZZZZZZZZ
[<c0158fac>] check_bytes_and_report+0x91/0xb2
[<c0159214>] check_object+0xc5/0x1c0
[<c0159e51>] __slab_alloc+0x39e/0x3b1
[<c0159fb2>] kmem_cache_alloc+0x48/0x92
[<d02f8ac4>] rfcomm_dlc_alloc+0x15/0x5d [rfcomm]
[<d02f8ac4>] rfcomm_dlc_alloc+0x15/0x5d [rfcomm]
[<d02fa28d>] rfcomm_sock_alloc+0x4e/0xbb [rfcomm]
[<d02fa32a>] rfcomm_sock_create+0x30/0x46 [rfcomm]
[<d02000d4>] bt_sock_create+0x5a/0x7a [bluetooth]
[<c016c6ba>] new_inode+0x14/0x6d
[<c0246840>] __sock_create+0x109/0x189
[<c02468f4>] sock_create+0x18/0x1c
[<c0246a71>] sys_socket+0x1c/0x3e
[<c02472dd>] sys_socketcall+0x5d/0x242
[<c015b4b5>] filp_close+0x51/0x58
[<c015c54d>] sys_close+0x54/0x83
[<c0103c72>] syscall_call+0x7/0xb
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
FIX kmalloc-128: Restoring 0xc5734f28-0xc5734f40=3D0x6b
FIX kmalloc-128: Marking all objects used
bus bluetooth: remove device acl0060574FEB37
PM: Removing info for bluetooth:acl0060574FEB37
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl0060574FEB37'
DEVICE: moving 'rfcomm0' to '<NULL>'
fill_kobj_path: path =3D '/class/tty/rfcomm0'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm0'
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl0060574FEB37'
kobject acl0060574FEB37: cleaning up
DEV: Unregistering device. ID =3D 'rfcomm0'
PM: Removing info for No Bus:rfcomm0
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm0'
kobject rfcomm0: cleaning up
device_create_release called for rfcomm0
DEV: registering device: ID =3D 'rfcomm0'
kobject rfcomm0: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm0
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm0'
DEVICE: moving 'rfcomm0' to 'acl00126253F906'
fill_kobj_path: path =3D '/class/tty/rfcomm0'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm0'
bus bluetooth: remove device acl000AD9D7A99A
PM: Removing info for bluetooth:acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl000AD9D7A99A'
DEVICE: moving 'rfcomm4' to '<NULL>'
fill_kobj_path: path =3D '/class/tty/rfcomm4'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm4'
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl000AD9D7A99A'
kobject acl000AD9D7A99A: cleaning up
DEV: Unregistering device. ID =3D 'rfcomm4'
PM: Removing info for No Bus:rfcomm4
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm4'
kobject rfcomm4: cleaning up
device_create_release called for rfcomm4
DEV: Unregistering device. ID =3D 'rfcomm0'
PM: Removing info for No Bus:rfcomm0
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm0'
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00126253F906'
kobject rfcomm0: cleaning up
device_create_release called for rfcomm0
bus bluetooth: remove device acl00126253F906
PM: Removing info for bluetooth:acl00126253F906
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00126253F906'
kobject acl00126253F906: cleaning up
bus bluetooth: remove device acl006057BB4D92
PM: Removing info for bluetooth:acl006057BB4D92
kobject_uevent_env
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D
BUG kmalloc-128: Poison overwritten
---------------------------------------------------------------------------=
--
INFO: 0xc7575168-0xc7575180. First byte 0x6a instead of 0x6b
INFO: Allocated in kobject_uevent_env+0xd9/0x3e2 age=3D296 cpu=3D0 pid=3D5
INFO: Freed in kobject_uevent_env+0x3c6/0x3e2 age=3D288 cpu=3D0 pid=3D5
INFO: Slab 0xc10eaea0 used=3D5 fp=3D0xc7575160 flags=3D0x400000c2
INFO: Object 0xc7575160 @offset=3D352 fp=3D0xc7575420
Bytes b4 0xc7575150: d2 0d 00 00 bf 27 0f 00 5a 5a 5a 5a 5a 5a 5a 5a =
=D2...=BF'..ZZZZZZZZ
Object 0xc7575160: 6b 6b 6b 6b 6b 6b 6b 6b 6a 6b 6b 6b 6b 6b 6b 6b =
kkkkkkkkjkkkkkkk
Object 0xc7575170: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b =
kkkkkkkkkkkkkkkk
Object 0xc7575180: 6a 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b =
jkkkkkkkkkkkkkkk
Object 0xc7575190: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b =
kkkkkkkkkkkkkkkk
Object 0xc75751a0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b =
kkkkkkkkkkkkkkkk
Object 0xc75751b0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b =
kkkkkkkkkkkkkkkk
Object 0xc75751c0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b =
kkkkkkkkkkkkkkkk
Object 0xc75751d0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 =
kkkkkkkkkkkkkkk=A5
Redzone 0xc75751e0: bb bb bb bb =
=BB=BB=BB=BB
Padding 0xc7575208: 5a 5a 5a 5a 5a 5a 5a 5a =
ZZZZZZZZ
[<c0158fac>] check_bytes_and_report+0x91/0xb2
[<c0159214>] check_object+0xc5/0x1c0
[<c0159e51>] __slab_alloc+0x39e/0x3b1
[<c0159298>] check_object+0x149/0x1c0
[<c0159fb2>] kmem_cache_alloc+0x48/0x92
[<c01c6558>] kobject_uevent_env+0xd9/0x3e2
[<d0204cf2>] del_conn+0x0/0x8 [bluetooth]
[<c01c6558>] kobject_uevent_env+0xd9/0x3e2
[<c019204f>] release_sysfs_dirent+0x53/0x65
[<d0204cf2>] del_conn+0x0/0x8 [bluetooth]
[<c0229f83>] device_pm_remove+0x3f/0x6a
[<d0204cf2>] del_conn+0x0/0x8 [bluetooth]
[<c022597d>] device_del+0x203/0x22e
[<d0204cf2>] del_conn+0x0/0x8 [bluetooth]
[<c0127959>] run_workqueue+0x7d/0x103
[<c0127fae>] worker_thread+0x0/0xbe
[<c0128060>] worker_thread+0xb2/0xbe
[<c012a4dc>] autoremove_wake_function+0x0/0x35
[<c012a32f>] kthread+0x36/0x5b
[<c012a2f9>] kthread+0x0/0x5b
[<c0104e17>] kernel_thread_helper+0x7/0x10
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
FIX kmalloc-128: Restoring 0xc7575168-0xc7575180=3D0x6b
FIX kmalloc-128: Marking all objects used
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl006057BB4D92'
DEV: registering device: ID =3D 'acl00126253F906'
kobject acl00126253F906: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl00126253F906
bus bluetooth: add device acl00126253F906
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00126253F906'
bus bluetooth: remove device acl00126253F906
PM: Removing info for bluetooth:acl00126253F906
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00126253F906'
kobject acl00126253F906: cleaning up
DEVICE: moving 'rfcomm3' to '<NULL>'
fill_kobj_path: path =3D '/class/tty/rfcomm3'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm3'
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl006057BB4D92'
kobject acl006057BB4D92: cleaning up
DEV: Unregistering device. ID =3D 'rfcomm3'
PM: Removing info for No Bus:rfcomm3
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm3'
kobject rfcomm3: cleaning up
device_create_release called for rfcomm3
DEV: registering device: ID =3D 'acl00126253F906'
kobject acl00126253F906: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl00126253F906
bus bluetooth: add device acl00126253F906
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00126253F906'
DEV: registering device: ID =3D 'rfcomm0'
kobject rfcomm0: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm0
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm0'
DEVICE: moving 'rfcomm0' to 'acl00126253F906'
fill_kobj_path: path =3D '/class/tty/rfcomm0'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm0'
bus bluetooth: remove device acl00126253F906
PM: Removing info for bluetooth:acl00126253F906
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00126253F906'
DEVICE: moving 'rfcomm0' to '<NULL>'
fill_kobj_path: path =3D '/class/tty/rfcomm0'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm0'
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00126253F906'
kobject acl00126253F906: cleaning up
DEV: Unregistering device. ID =3D 'rfcomm0'
PM: Removing info for No Bus:rfcomm0
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm0'
kobject rfcomm0: cleaning up
device_create_release called for rfcomm0
DEV: registering device: ID =3D 'acl006057BB4D92'
kobject acl006057BB4D92: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl006057BB4D92
bus bluetooth: add device acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl006057BB4D92'
DEV: registering device: ID =3D 'acl000AD9D7A99A'
kobject acl000AD9D7A99A: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl000AD9D7A99A
bus bluetooth: add device acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl000AD9D7A99A'
DEV: registering device: ID =3D 'acl0017B066F14B'
kobject acl0017B066F14B: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl0017B066F14B
bus bluetooth: add device acl0017B066F14B
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl0017B066F14B'
DEV: registering device: ID =3D 'acl00E0033364E5'
kobject acl00E0033364E5: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl00E0033364E5
bus bluetooth: add device acl00E0033364E5
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00E0033364E5'
hcid[5554]: segfault at d6e62224 eip b7f65130 esp bfe76f60 error 4
bus bluetooth: remove device acl00E0033364E5
PM: Removing info for bluetooth:acl00E0033364E5
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00E0033364E5'
kobject acl00E0033364E5: cleaning up
bus bluetooth: remove device acl006057BB4D92
PM: Removing info for bluetooth:acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl006057BB4D92'
kobject acl006057BB4D92: cleaning up
bus bluetooth: remove device acl0017B066F14B
PM: Removing info for bluetooth:acl0017B066F14B
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl0017B066F14B'
kobject acl0017B066F14B: cleaning up
bus bluetooth: remove device acl000AD9D7A99A
PM: Removing info for bluetooth:acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl000AD9D7A99A'
kobject acl000AD9D7A99A: cleaning up
DEV: registering device: ID =3D 'acl0060574FEB37'
kobject acl0060574FEB37: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl0060574FEB37
bus bluetooth: add device acl0060574FEB37
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl0060574FEB37'
bus bluetooth: remove device acl0060574FEB37
PM: Removing info for bluetooth:acl0060574FEB37
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl0060574FEB37'
kobject acl0060574FEB37: cleaning up
DEV: registering device: ID =3D 'acl0017B066F14B'
kobject acl0017B066F14B: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl0017B066F14B
bus bluetooth: add device acl0017B066F14B
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl0017B066F14B'
bus bluetooth: remove device acl0017B066F14B
PM: Removing info for bluetooth:acl0017B066F14B
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl0017B066F14B'
kobject acl0017B066F14B: cleaning up
DEV: registering device: ID =3D 'acl00E0033364E5'
kobject acl00E0033364E5: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl00E0033364E5
bus bluetooth: add device acl00E0033364E5
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl00E0033364E5'
bus bluetooth: remove device acl00E0033364E5
PM: Removing info for bluetooth:acl00E0033364E5
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl00E0033364E5'
kobject acl00E0033364E5: cleaning up
DEV: registering device: ID =3D 'acl00126253F906'
kobject acl00126253F906: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl00126253F906
bus bluetooth: add device acl00126253F906
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00126253F906'
bus bluetooth: remove device acl00126253F906
PM: Removing info for bluetooth:acl00126253F906
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00126253F906'
kobject acl00126253F906: cleaning up
DEV: registering device: ID =3D 'acl000AD9D7A99A'
kobject acl000AD9D7A99A: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl000AD9D7A99A
bus bluetooth: add device acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl000AD9D7A99A'
DEV: registering device: ID =3D 'acl006057BB4D92'
kobject acl006057BB4D92: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl006057BB4D92
bus bluetooth: add device acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl006057BB4D92'
bus bluetooth: remove device acl006057BB4D92
PM: Removing info for bluetooth:acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl006057BB4D92'
kobject acl006057BB4D92: cleaning up
bus bluetooth: remove device acl000AD9D7A99A
PM: Removing info for bluetooth:acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl000AD9D7A99A'
kobject acl000AD9D7A99A: cleaning up
DEV: registering device: ID =3D 'acl006057BB4D92'
kobject acl006057BB4D92: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl006057BB4D92
bus bluetooth: add device acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl006057BB4D92'
DEV: registering device: ID =3D 'acl000AD9D7A99A'
kobject acl000AD9D7A99A: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl000AD9D7A99A
bus bluetooth: add device acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl000AD9D7A99A'
bus bluetooth: remove device acl006057BB4D92
PM: Removing info for bluetooth:acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl006057BB4D92'
kobject acl006057BB4D92: cleaning up
bus bluetooth: remove device acl000AD9D7A99A
PM: Removing info for bluetooth:acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl000AD9D7A99A'
kobject acl000AD9D7A99A: cleaning up
DEV: registering device: ID =3D 'acl006057BB4D92'
kobject acl006057BB4D92: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl006057BB4D92
bus bluetooth: add device acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl006057BB4D92'
bus bluetooth: remove device acl006057BB4D92
PM: Removing info for bluetooth:acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl006057BB4D92'
kobject acl006057BB4D92: cleaning up
DEV: registering device: ID =3D 'acl000AD9D7A99A'
kobject acl000AD9D7A99A: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl000AD9D7A99A
bus bluetooth: add device acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl000AD9D7A99A'
bus bluetooth: remove device acl000AD9D7A99A
PM: Removing info for bluetooth:acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl000AD9D7A99A'
kobject acl000AD9D7A99A: cleaning up
DEV: registering device: ID =3D 'acl0060574FEB37'
kobject acl0060574FEB37: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl0060574FEB37
bus bluetooth: add device acl0060574FEB37
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl0060574FEB37'
DEV: registering device: ID =3D 'acl0017B066F14B'
kobject acl0017B066F14B: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl0017B066F14B
bus bluetooth: add device acl0017B066F14B
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl0017B066F14B'
DEV: registering device: ID =3D 'acl00E0033364E5'
kobject acl00E0033364E5: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl00E0033364E5
bus bluetooth: add device acl00E0033364E5
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl00E0033364E5'
DEV: registering device: ID =3D 'rfcomm0'
kobject rfcomm0: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm0
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm0'
DEVICE: moving 'rfcomm0' to 'acl0060574FEB37'
fill_kobj_path: path =3D '/class/tty/rfcomm0'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm0'
DEV: registering device: ID =3D 'rfcomm1'
kobject rfcomm1: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm1
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm1'
DEVICE: moving 'rfcomm1' to 'acl00E0033364E5'
fill_kobj_path: path =3D '/class/tty/rfcomm1'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm1'
DEV: registering device: ID =3D 'acl0007E0B37003'
kobject acl0007E0B37003: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl0007E0B37003
bus bluetooth: add device acl0007E0B37003
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl0007E0B37003'
DEV: registering device: ID =3D 'rfcomm2'
kobject rfcomm2: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm2
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm2'
DEVICE: moving 'rfcomm2' to 'acl0017B066F14B'
fill_kobj_path: path =3D '/class/tty/rfcomm2'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm2'
bus bluetooth: remove device acl0007E0B37003
PM: Removing info for bluetooth:acl0007E0B37003
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl0007E0B37003'
kobject acl0007E0B37003: cleaning up
DEV: registering device: ID =3D 'acl000AD9D7A99A'
kobject acl000AD9D7A99A: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl000AD9D7A99A
bus bluetooth: add device acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl000AD9D7A99A'
DEV: registering device: ID =3D 'rfcomm3'
kobject rfcomm3: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm3
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm3'
DEVICE: moving 'rfcomm3' to 'acl000AD9D7A99A'
fill_kobj_path: path =3D '/class/tty/rfcomm3'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm3'
DEV: registering device: ID =3D 'acl00126253F906'
kobject acl00126253F906: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl00126253F906
bus bluetooth: add device acl00126253F906
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00126253F906'
bus bluetooth: remove device acl00126253F906
PM: Removing info for bluetooth:acl00126253F906
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00126253F906'
kobject acl00126253F906: cleaning up
DEV: registering device: ID =3D 'acl00126253F906'
kobject acl00126253F906: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl00126253F906
bus bluetooth: add device acl00126253F906
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00126253F906'
DEV: registering device: ID =3D 'acl006057BB4D92'
kobject acl006057BB4D92: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl006057BB4D92
bus bluetooth: add device acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl006057BB4D92'
DEV: registering device: ID =3D 'rfcomm4'
kobject rfcomm4: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm4
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm4'
DEVICE: moving 'rfcomm4' to 'acl00126253F906'
fill_kobj_path: path =3D '/class/tty/rfcomm4'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm4'
DEV: registering device: ID =3D 'rfcomm5'
kobject rfcomm5: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm5
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm5'
DEVICE: moving 'rfcomm5' to 'acl006057BB4D92'
fill_kobj_path: path =3D '/class/tty/rfcomm5'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm5'
hcidump[5701]: segfault at 080a9dc4 eip 0805f3c7 esp bfd11d00 error 4
bus bluetooth: remove device acl006057BB4D92
PM: Removing info for bluetooth:acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl006057BB4D92'
DEVICE: moving 'rfcomm5' to '<NULL>'
fill_kobj_path: path =3D '/class/tty/rfcomm5'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm5'
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl006057BB4D92'
kobject acl006057BB4D92: cleaning up
DEV: Unregistering device. ID =3D 'rfcomm5'
PM: Removing info for No Bus:rfcomm5
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm5'
kobject rfcomm5: cleaning up
device_create_release called for rfcomm5
bus bluetooth: remove device acl00E0033364E5
PM: Removing info for bluetooth:acl00E0033364E5
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl00E0033364E5'
DEVICE: moving 'rfcomm1' to '<NULL>'
fill_kobj_path: path =3D '/class/tty/rfcomm1'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm1'
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl00E0033364E5'
kobject acl00E0033364E5: cleaning up
DEV: Unregistering device. ID =3D 'rfcomm1'
PM: Removing info for No Bus:rfcomm1
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm1'
kobject rfcomm1: cleaning up
device_create_release called for rfcomm1
bus bluetooth: remove device acl000AD9D7A99A
PM: Removing info for bluetooth:acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl000AD9D7A99A'
DEVICE: moving 'rfcomm3' to '<NULL>'
fill_kobj_path: path =3D '/class/tty/rfcomm3'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm3'
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl000AD9D7A99A'
kobject acl000AD9D7A99A: cleaning up
DEV: Unregistering device. ID =3D 'rfcomm3'
PM: Removing info for No Bus:rfcomm3
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm3'
kobject rfcomm3: cleaning up
device_create_release called for rfcomm3
DEV: registering device: ID =3D 'acl006057BB4D92'
kobject acl006057BB4D92: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl006057BB4D92
bus bluetooth: add device acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl006057BB4D92'
bus bluetooth: remove device acl006057BB4D92
PM: Removing info for bluetooth:acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl006057BB4D92'
kobject acl006057BB4D92: cleaning up
DEV: registering device: ID =3D 'acl006057BB4D92'
kobject acl006057BB4D92: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl006057BB4D92
bus bluetooth: add device acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl006057BB4D92'
bus bluetooth: remove device acl0017B066F14B
PM: Removing info for bluetooth:acl0017B066F14B
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl0017B066F14B'
DEVICE: moving 'rfcomm2' to '<NULL>'
fill_kobj_path: path =3D '/class/tty/rfcomm2'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm2'
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl0017B066F14B'
kobject acl0017B066F14B: cleaning up
DEV: Unregistering device. ID =3D 'rfcomm2'
PM: Removing info for No Bus:rfcomm2
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm2'
kobject rfcomm2: cleaning up
device_create_release called for rfcomm2
bus bluetooth: remove device acl006057BB4D92
PM: Removing info for bluetooth:acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl006057BB4D92'
kobject acl006057BB4D92: cleaning up
DEV: registering device: ID =3D 'acl006057BB4D92'
kobject acl006057BB4D92: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl006057BB4D92
bus bluetooth: add device acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl006057BB4D92'
bus bluetooth: remove device acl006057BB4D92
PM: Removing info for bluetooth:acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl006057BB4D92'
kobject acl006057BB4D92: cleaning up
DEV: registering device: ID =3D 'acl006057BB4D92'
kobject acl006057BB4D92: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl006057BB4D92
bus bluetooth: add device acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl006057BB4D92'
bus bluetooth: remove device acl0060574FEB37
PM: Removing info for bluetooth:acl0060574FEB37
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl0060574FEB37'
DEVICE: moving 'rfcomm0' to '<NULL>'
fill_kobj_path: path =3D '/class/tty/rfcomm0'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm0'
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl0060574FEB37'
kobject acl0060574FEB37: cleaning up
DEV: Unregistering device. ID =3D 'rfcomm0'
PM: Removing info for No Bus:rfcomm0
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm0'
kobject rfcomm0: cleaning up
device_create_release called for rfcomm0
DEV: registering device: ID =3D 'rfcomm0'
kobject rfcomm0: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm0
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm0'
DEVICE: moving 'rfcomm0' to 'acl006057BB4D92'
fill_kobj_path: path =3D '/class/tty/rfcomm0'
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm0'
DEV: registering device: ID =3D 'acl0007E0B37003'
kobject acl0007E0B37003: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl0007E0B37003
bus bluetooth: add device acl0007E0B37003
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl0007E0B37003'
bus bluetooth: remove device acl0007E0B37003
PM: Removing info for bluetooth:acl0007E0B37003
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/a=
cl0007E0B37003'
kobject acl0007E0B37003: cleaning up
DEV: Unregistering device. ID =3D 'rfcomm0'
PM: Removing info for No Bus:rfcomm0
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm0'
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl006057BB4D92'
kobject rfcomm0: cleaning up
device_create_release called for rfcomm0
bus bluetooth: remove device acl006057BB4D92
PM: Removing info for bluetooth:acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl006057BB4D92'
kobject acl006057BB4D92: cleaning up
BUG: unable to handle kernel paging request at virtual address 6b6b6b77
printing eip:
c0249964
*pde =3D 00000000
Oops: 0000 [#1]
Modules linked in: rfcomm l2cap battery ipv6 dm_snapshot dm_mirror =
dm_mod softdog loop parport_pc parport psmouse serio_raw floppy pcspkr =
rtc ac button snd_cs5535audio snd_ac97_codec ac97_bus snd_pcm snd_timer =
snd soundcore snd_page_alloc geode_rng hci_usb cs5535_gpio bluetooth =
geode_aes blkcipher tsdev evdev reiserfs usbhid hid ide_disk generic =
amd74xx ohci_hcd ide_core sata_via ata_generic 8139cp libata usbcore =
8139too mii scsi_mod thermal processor fan
CPU: 0
EIP: 0060:[<c0249964>] Not tainted VLI
EFLAGS: 00010016 (2.6.23-rc8 #3)
EIP is at skb_dequeue+0x19/0x4a
eax: 00000216 ebx: 00000216 ecx: 00000000 edx: 6b6b6b77
esi: c7ff0dd8 edi: c7ff0c90 ebp: c7ff0c9c esp: c1251f60
ds: 007b es: 007b fs: 0000 gs: 0000 ss: 0068
Process events/0 (pid: 5, ti=3Dc1250000 task=3Dc12455c0 task.ti=3Dc1250000)
Stack: 6b6b6b77 c024abe6 c7ff0c90 d02fb05d c7ff0df0 c020e754 c75152d8 =
00000000
00000000 00000000 cf7a2630 c7ff0dd8 c020e68b 00000000 c0127959 =
c1251fb4
00000046 c12455c0 cf7a2630 cf7a2630 c0127fae c1251fd0 c0128060 =
00000000
Call Trace:
[<c024abe6>] skb_queue_purge+0x11/0x17
[<d02fb05d>] rfcomm_tty_flush_buffer+0x1c/0x33 [rfcomm]
[<c020e754>] do_tty_hangup+0xc9/0x2d0
[<c020e68b>] do_tty_hangup+0x0/0x2d0
[<c0127959>] run_workqueue+0x7d/0x103
[<c0127fae>] worker_thread+0x0/0xbe
[<c0128060>] worker_thread+0xb2/0xbe
[<c012a4dc>] autoremove_wake_function+0x0/0x35
[<c012a32f>] kthread+0x36/0x5b
[<c012a2f9>] kthread+0x0/0x5b
[<c0104e17>] kernel_thread_helper+0x7/0x10
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
Code: 93 a0 00 00 00 66 8b 40 0a 66 89 42 0a 5b 5e 5f 5d c3 53 89 c2 9c =
58 90 8d b4 26 00 00 00 00 89 c3 fa 90 8d b4 26 00 00 00 00 90 <8b> 0a =
39 d1 75 04 31 c9 eb 17 8b 01 ff 4a 08 89 02 89 50 04 c7
EIP: [<c0249964>] skb_dequeue+0x19/0x4a SS:ESP 0068:c1251f60
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D
BUG kmalloc-128: Poison overwritten
---------------------------------------------------------------------------=
--
INFO: 0xc04d0c68-0xc04d0c80. First byte 0x6a instead of 0x6b
INFO: Allocated in kobject_uevent_env+0xd9/0x3e2 age=3D1432 cpu=3D0 pid=3D5
INFO: Freed in kobject_uevent_env+0x3c6/0x3e2 age=3D1424 cpu=3D0 pid=3D5
INFO: Slab 0xc1009a00 used=3D21 fp=3D0xc04d0c60 flags=3D0x00c2
INFO: Object 0xc04d0c60 @offset=3D3168 fp=3D0xc04d0b00
Bytes b4 0xc04d0c50: 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a =
........ZZZZZZZZ
Object 0xc04d0c60: 6b 6b 6b 6b 6b 6b 6b 6b 6a 6b 6b 6b 6b 6b 6b 6b =
kkkkkkkkjkkkkkkk
Object 0xc04d0c70: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b =
kkkkkkkkkkkkkkkk
Object 0xc04d0c80: 6a 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b =
jkkkkkkkkkkkkkkk
Object 0xc04d0c90: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b =
kkkkkkkkkkkkkkkk
Object 0xc04d0ca0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b =
kkkkkkkkkkkkkkkk
Object 0xc04d0cb0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b =
kkkkkkkkkkkkkkkk
Object 0xc04d0cc0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b =
kkkkkkkkkkkkkkkk
Object 0xc04d0cd0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 =
kkkkkkkkkkkkkkk=A5
Redzone 0xc04d0ce0: bb bb bb bb =
=BB=BB=BB=BB
Padding 0xc04d0d08: 5a 5a 5a 5a 5a 5a 5a 5a =
ZZZZZZZZ
[<c0158fac>] check_bytes_and_report+0x91/0xb2
[<c0159214>] check_object+0xc5/0x1c0
[<c0159e51>] __slab_alloc+0x39e/0x3b1
[<c0159fb2>] kmem_cache_alloc+0x48/0x92
[<d01568d2>] alloc_journal_list+0x13/0x66 [reiserfs]
[<d01568d2>] alloc_journal_list+0x13/0x66 [reiserfs]
[<d015819e>] do_journal_end+0x7e7/0xb5b [reiserfs]
[<d0158572>] journal_end_sync+0x60/0x65 [reiserfs]
[<d014a25d>] reiserfs_sync_fs+0x2d/0x44 [reiserfs]
[<c015e565>] sync_supers+0x3e/0x6a
[<c0147a1e>] pdflush+0x0/0x194
[<c01476f6>] wb_kupdate+0x23/0xd2
[<c0147a1e>] pdflush+0x0/0x194
[<c0147b1c>] pdflush+0xfe/0x194
[<c02a8266>] __sched_text_start+0x1d6/0x245
[<c01476d3>] wb_kupdate+0x0/0xd2
[<c012a32f>] kthread+0x36/0x5b
[<c012a2f9>] kthread+0x0/0x5b
[<c0104e17>] kernel_thread_helper+0x7/0x10
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
FIX kmalloc-128: Restoring 0xc04d0c68-0xc04d0c80=3D0x6b
FIX kmalloc-128: Marking all objects used
DEV: Unregistering device. ID =3D 'rfcomm4'
PM: Removing info for No Bus:rfcomm4
kobject_uevent_env
fill_kobj_path: path =3D '/class/tty/rfcomm4'
fill_kobj_path: path =3D =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/a=
cl00126253F906'
kobject rfcomm4: cleaning up
device_create_release called for rfcomm4
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D
BUG kmalloc-128: Poison overwritten
---------------------------------------------------------------------------=
--
INFO: 0xc04d02c8-0xc04d02e0. First byte 0x6a instead of 0x6b
INFO: Allocated in rfcomm_dev_ioctl+0xbd/0x4e6 [rfcomm] age=3D31493 cpu=3D0 =
pid=3D5679
INFO: Freed in rfcomm_dev_destruct+0x59/0x65 [rfcomm] age=3D9707 cpu=3D0 =
pid=3D5679
INFO: Slab 0xc1009a00 used=3D21 fp=3D0xc04d02c0 flags=3D0x00c2
INFO: Object 0xc04d02c0 @offset=3D704 fp=3D0xc04d0160
Bytes b4 0xc04d02b0: 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a =
........ZZZZZZZZ
Object 0xc04d02c0: 6b 6b 6b 6b 6b 6b 6b 6b 6a 6b 6b 6b 6b 6b 6b 6b =
kkkkkkkkjkkkkkkk
Object 0xc04d02d0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b =
kkkkkkkkkkkkkkkk
Object 0xc04d02e0: 6a 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b =
jkkkkkkkkkkkkkkk
Object 0xc04d02f0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b =
kkkkkkkkkkkkkkkk
Object 0xc04d0300: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b =
kkkkkkkkkkkkkkkk
Object 0xc04d0310: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b =
kkkkkkkkkkkkkkkk
Object 0xc04d0320: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b =
kkkkkkkkkkkkkkkk
Object 0xc04d0330: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 =
kkkkkkkkkkkkkkk=A5
Redzone 0xc04d0340: bb bb bb bb =
=BB=BB=BB=BB
Padding 0xc04d0368: 5a 5a 5a 5a 5a 5a 5a 5a =
ZZZZZZZZ
[<c0158fac>] check_bytes_and_report+0x91/0xb2
[<c0159214>] check_object+0xc5/0x1c0
[<c0159e51>] __slab_alloc+0x39e/0x3b1
[<c0159fb2>] kmem_cache_alloc+0x48/0x92
[<d01568d2>] alloc_journal_list+0x13/0x66 [reiserfs]
[<d01568d2>] alloc_journal_list+0x13/0x66 [reiserfs]
[<d015819e>] do_journal_end+0x7e7/0xb5b [reiserfs]
[<c011706e>] update_curr_load+0x6e/0x83
[<d0158572>] journal_end_sync+0x60/0x65 [reiserfs]
[<d014a25d>] reiserfs_sync_fs+0x2d/0x44 [reiserfs]
[<c015e565>] sync_supers+0x3e/0x6a
[<c0147a1e>] pdflush+0x0/0x194
[<c01476f6>] wb_kupdate+0x23/0xd2
[<c0147a1e>] pdflush+0x0/0x194
[<c0147b1c>] pdflush+0xfe/0x194
[<c02a8266>] __sched_text_start+0x1d6/0x245
[<c01476d3>] wb_kupdate+0x0/0xd2
[<c012a32f>] kthread+0x36/0x5b
[<c012a2f9>] kthread+0x0/0x5b
[<c0104e17>] kernel_thread_helper+0x7/0x10
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
FIX kmalloc-128: Restoring 0xc04d02c8-0xc04d02e0=3D0x6b
FIX kmalloc-128: Marking all objects used
DEV: Unregistering device. ID =3D 'vcs1'
PM: Removing info for No Bus:vcs1
kobject_uevent_env
fill_kobj_path: path =3D '/class/vc/vcs1'
kobject vcs1: cleaning up
device_create_release called for vcs1
DEV: Unregistering device. ID =3D 'vcsa1'
PM: Removing info for No Bus:vcsa1
kobject_uevent_env
fill_kobj_path: path =3D '/class/vc/vcsa1'
kobject vcsa1: cleaning up
device_create_release called for vcsa1
DEV: Unregistering device. ID =3D 'vcs2'
PM: Removing info for No Bus:vcs2
kobject_uevent_env
fill_kobj_path: path =3D '/class/vc/vcs2'
kobject vcs2: cleaning up
device_create_release called for vcs2
DEV: Unregistering device. ID =3D 'vcsa2'
PM: Removing info for No Bus:vcsa2
kobject_uevent_env
fill_kobj_path: path =3D '/class/vc/vcsa2'
kobject vcsa2: cleaning up
device_create_release called for vcsa2
DEV: Unregistering device. ID =3D 'vcs4'
PM: Removing info for No Bus:vcs4
kobject_uevent_env
fill_kobj_path: path =3D '/class/vc/vcs4'
kobject vcs4: cleaning up
device_create_release called for vcs4
DEV: Unregistering device. ID =3D 'vcsa4'
PM: Removing info for No Bus:vcsa4
kobject_uevent_env
fill_kobj_path: path =3D '/class/vc/vcsa4'
kobject vcsa4: cleaning up
device_create_release called for vcsa4
DEV: Unregistering device. ID =3D 'vcs5'
PM: Removing info for No Bus:vcs5
kobject_uevent_env
fill_kobj_path: path =3D '/class/vc/vcs5'
kobject vcs5: cleaning up
device_create_release called for vcs5
DEV: Unregistering device. ID =3D 'vcsa5'
PM: Removing info for No Bus:vcsa5
kobject_uevent_env
fill_kobj_path: path =3D '/class/vc/vcsa5'
kobject vcsa5: cleaning up
device_create_release called for vcsa5
DEV: Unregistering device. ID =3D 'vcs3'
PM: Removing info for No Bus:vcs3
kobject_uevent_env
fill_kobj_path: path =3D '/class/vc/vcs3'
kobject vcs3: cleaning up
device_create_release called for vcs3
DEV: Unregistering device. ID =3D 'vcsa3'
PM: Removing info for No Bus:vcsa3
kobject_uevent_env
fill_kobj_path: path =3D '/class/vc/vcsa3'
kobject vcsa3: cleaning up
device_create_release called for vcsa3
DEV: Unregistering device. ID =3D 'vcs6'
PM: Removing info for No Bus:vcs6
kobject_uevent_env
fill_kobj_path: path =3D '/class/vc/vcs6'
kobject vcs6: cleaning up
device_create_release called for vcs6
DEV: Unregistering device. ID =3D 'vcsa6'
PM: Removing info for No Bus:vcsa6
kobject_uevent_env
fill_kobj_path: path =3D '/class/vc/vcsa6'
kobject vcsa6: cleaning up
device_create_release called for vcsa6
Restarting system.
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
WARNING: multiple messages have this Message-ID (diff)
From: Pierre-Yves Paulus <py@idlum.be>
To: linux-kernel@vger.kernel.org
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>,
Chuck Ebbert <cebbert@redhat.com>,
BlueZ development <bluez-devel@lists.sourceforge.net>
Subject: Re: Warnings and Oops on 2.6.23-rc6 while activily using rfcomm links (mm/slab.c)
Date: Thu, 27 Sep 2007 20:07:54 +0200 [thread overview]
Message-ID: <46FBF17A.6030009@idlum.be> (raw)
In-Reply-To: <46FBC1AE.4020404@idlum.be>
Hello,
>>>> Please use CONFIG_SLUB and turn on SLUB debugging. Something is very
>>>> wrong
>>>> somewhere...
>>> I did so, on 2.6.23-rc8. I also did include CONFIG_DEBUG_DRIVER and
>>> CONFIG_DEBUG_KOBJECT, following Cornelia Huck's advice.
>>
>> Did you see any messages (from the driver core) surrounding
>> kobject_move() usage or the kref badness messages? I'm asking because
>> refcounting/lifetime issues may be the reason for your problems...
>
> I just figured out how to get KERN_DEBUG to the serial console for
> capture...
Another one below, complete log from power-up to reboot, with some bugs
and one Oops. I only trimmed the numerous "l2cap_recv_acldata" and "ACL
packet for unknown connection handle" lines which always fill up the log.
þÀLinux version 2.6.23-rc8 (root@p2a) (gcc version 4.1.2 20061115
(prerelease) (Debian 4.1.1-21)) #3 Wed Sep 26 09:19:06 UTC 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000f7b0000 (usable)
BIOS-e820: 000000000f7b0000 - 000000000f7b3000 (ACPI NVS)
BIOS-e820: 000000000f7b3000 - 000000000f7c0000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
247MB LOWMEM available.
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 63408
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 63408
DMI 2.2 present.
ACPI: RSDP 000F63C0, 0014 (r0 AMDGX3)
ACPI: RSDT 0F7B3040, 0028 (r1 AMDGX3 AWRDACPI 42302E31 AWRD 0)
ACPI: FACP 0F7B30C0, 0074 (r1 AMDGX3 AWRDACPI 42302E31 AWRD 0)
ACPI: DSDT 0F7B3180, 35BD (r1 AMDGX3 AWRDACPI 1000 MSFT 100000E)
ACPI: FACS 0F7B0000, 0040
ACPI: PM-Timer IO Port: 0x9c10
Allocating PCI resources starting at 10000000 (gap: 0f7c0000:f0830000)
swsusp: Registered nosave memory region: 000000000009e000 - 000000000009f000
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Built 1 zonelists in Zone order. Total pages: 62913
Kernel command line: root=UUID=c925de24-972b-437c-860f-8109d900aa4b ro
panic=60 console=ttyS1,38400 console=tty0 slub_debug
No local APIC present or hardware disabled
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 498.062 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS1] enabled
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 243152k/253632k available (1704k kernel code, 9908k reserved,
681k data, 312k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffb3000 - 0xfffff000 ( 304 kB)
vmalloc : 0xd0000000 - 0xfffb1000 ( 767 MB)
lowmem : 0xc0000000 - 0xcf7b0000 ( 247 MB)
.init : 0xc0358000 - 0xc03a6000 ( 312 kB)
.data : 0xc02aa395 - 0xc0354aa4 ( 681 kB)
.text : 0xc0100000 - 0xc02aa395 (1704 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 997.65 BogoMIPS
(lpj=1995305)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 128K (32 bytes/line)
Compat vDSO mapped to ffffe000.
CPU: AMD Geode(TM) Integrated Processor by AMD PCS stepping 02
Checking 'hlt' instruction... OK.
ACPI: Core revision 20070126
ACPI: setting ELCR to 0200 (from 0c00)
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfa740, last bus=0
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
NET: Registered protocol family 8
NET: Registered protocol family 20
Time: tsc clocksource has been installed.
ACPI: RTC can wake from S4
pnp: 00:00: iomem range 0xf0000-0xf3fff could not be reserved
pnp: 00:00: iomem range 0xf4000-0xf7fff could not be reserved
pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
checking if image is initramfs...<6>Switched to high resolution mode on
CPU 0
it is
Freeing initrd memory: 4716k freed
audit: initializing netlink socket (disabled)
audit(1190905112.522:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0b: ttyS2 at I/O 0x3e8 (irq = 5) is a 16550A
00:0c: ttyS3 at I/O 0x2e8 (irq = 5) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 6
EISA: Detected 0 cards.
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 312k freed
SCSI subsystem initialized
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt Link [LNKC] BIOS reported IRQ 0, using IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] -> GSI 11 (level,
low) -> IRQ 11
eth0: RealTek RTL8139 at 0xf200, 00:04:5f:85:78:91, IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNKB] -> GSI 11 (level,
low) -> IRQ 11
eth1: RealTek RTL8139 at 0xf600, 00:04:5f:85:78:92, IRQ 11
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
ACPI: PCI Interrupt Link [LNKD] BIOS reported IRQ 0, using IRQ 10
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKD] -> GSI 10 (level,
low) -> IRQ 10
sata_via 0000:00:0a.0: routed to hard irq line 11
usbcore: registered new device driver usb
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
scsi0 : sata_via
scsi1 : sata_via
scsi2 : sata_via
ata1: SATA max UDMA/133 cmd 0x0001ff00 ctl 0x0001ff0a bmdma 0x0001fb00
irq 10
ata2: SATA max UDMA/133 cmd 0x0001fe00 ctl 0x0001fe0a bmdma 0x0001fb08
irq 10
ata3: PATA max UDMA/133 cmd 0x0001fd00 ctl 0x0001fd0a bmdma 0x0001fb10
irq 10
ata1: SATA link down (SStatus 0 SControl 310)
ata2: SATA link down (SStatus 0 SControl 310)
ACPI: PCI Interrupt 0000:00:0f.4[D] -> Link [LNKD] -> GSI 10 (level,
low) -> IRQ 10
ohci_hcd 0000:00:0f.4: OHCI Host Controller
ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0f.4: irq 10, io mem 0xefffd000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
AMD5536: IDE controller at PCI slot 0000:00:0f.2
AMD5536: chipset revision 1
AMD5536: not 100% native mode: will probe irqs later
AMD5536: 0000:00:0f.2 (rev 01) UDMA100 controller
ide0: BM-DMA at 0xfa00-0xfa07, BIOS settings: hda:DMA, hdb:pio
usb 1-1: new full speed USB device using ohci_hcd and address 2
hda: PQI IDE DiskOnModule, ATA DISK drive
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 7 ports detected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
usb 1-1.4: new full speed USB device using ohci_hcd and address 3
hda: max request size: 128KiB
hda: 4062240 sectors (2079 MB) w/0KiB Cache, CHS=4030/16/63, UDMA(33)
hda: hda1 hda2 < hda5 hda6 >
usb 1-1.4: configuration #1 chosen from 1 choice
hub 1-1.4:1.0: USB hub found
hub 1-1.4:1.0: 3 ports detected
usb 1-1.5: new full speed USB device using ohci_hcd and address 4
usb 1-1.5: configuration #1 chosen from 1 choice
hub 1-1.5:1.0: USB hub found
hub 1-1.5:1.0: 3 ports detected
usb 1-1.2: new full speed USB device using ohci_hcd and address 5
usb 1-1.2: configuration #1 chosen from 1 choice
usb 1-1.4.2: new full speed USB device using ohci_hcd and address 6
usb 1-1.4.2: configuration #1 chosen from 1 choice
usb 1-1.4.3: new full speed USB device using ohci_hcd and address 7
usb 1-1.4.3: configuration #1 chosen from 1 choice
usb 1-1.5.2: new full speed USB device using ohci_hcd and address 8
usb 1-1.5.2: configuration #1 chosen from 1 choice
usb 1-1.5.3: new full speed USB device using ohci_hcd and address 9
usb 1-1.5.3: configuration #1 chosen from 1 choice
usb 1-1.4.1: new full speed USB device using ohci_hcd and address 10
usb 1-1.4.1: configuration #1 chosen from 1 choice
usb 1-1.5.1: new full speed USB device using ohci_hcd and address 11
usb 1-1.5.1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: HID 0a5c:4502 as /class/input/input0
input: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:0f.4-1.4.2
input: HID 0a5c:4503 as /class/input/input1
input: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:0f.4-1.4.3
input: HID 0a5c:4502 as /class/input/input2
input: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:0f.4-1.5.2
input: HID 0a5c:4503 as /class/input/input3
input: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:0f.4-1.5.3
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
ReiserFS: hda6: found reiserfs format "3.6" with standard journal
ReiserFS: hda6: using ordered data mode
ReiserFS: hda6: journal params: device hda6, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: hda6: checking transaction log (hda6)
ReiserFS: hda6: Using r5 hash to sort names
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:01.2[A] -> Link [LNKA] -> GSI 10 (level,
low) -> IRQ 10
geode-aes: GEODE AES engine enabled.
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
AMD Geode RNG detected
ACPI: PCI Interrupt 0000:00:0f.3[B] -> Link [LNKB] -> GSI 11 (level,
low) -> IRQ 11
input: Power Button (FF) as /class/input/input4
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input5
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input6
ACPI: Sleep Button (CM) [SLPB]
ACPI: AC Adapter [AC] (on-line)
Real Time Clock Driver v1.12ac
input: PC Speaker as /class/input/input7
FDC 0 is a post-1991 82077
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Adding 264560k swap on /dev/hda5. Priority:-1 extents:1 across:264560k
loop: module loaded
Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60
sec (nowayout= 0)
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised:
dm-devel@redhat.com
eth0: link down
eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
kobject l2cap: registering. parent: <NULL>, set: module
kobject holders: registering. parent: l2cap, set: <NULL>
kobject_uevent_env
kobject filter function caused the event to drop!
kobject_uevent_env
fill_kobj_path: path = '/module/l2cap'
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
DEV: registering device: ID = 'acl00E0033364E5'
kobject acl00E0033364E5: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl00E0033364E5
bus bluetooth: add device acl00E0033364E5
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00E0033364E5'
DEV: registering device: ID = 'acl0060574FEB37'
kobject acl0060574FEB37: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl0060574FEB37
bus bluetooth: add device acl0060574FEB37
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl0060574FEB37'
DEV: registering device: ID = 'acl000AD9D7A99A'
kobject acl000AD9D7A99A: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl000AD9D7A99A
bus bluetooth: add device acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl000AD9D7A99A'
bus bluetooth: remove device acl00E0033364E5
PM: Removing info for bluetooth:acl00E0033364E5
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00E0033364E5'
kobject acl00E0033364E5: cleaning up
bus bluetooth: remove device acl0060574FEB37
PM: Removing info for bluetooth:acl0060574FEB37
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl0060574FEB37'
kobject acl0060574FEB37: cleaning up
kobject rfcomm: registering. parent: <NULL>, set: module
kobject holders: registering. parent: rfcomm, set: <NULL>
kobject_uevent_env
kobject filter function caused the event to drop!
kobject_uevent_env
fill_kobj_path: path = '/module/rfcomm'
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
bus bluetooth: remove device acl000AD9D7A99A
PM: Removing info for bluetooth:acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl000AD9D7A99A'
kobject acl000AD9D7A99A: cleaning up
DEV: registering device: ID = 'acl000AD9D7A99A'
kobject acl000AD9D7A99A: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl000AD9D7A99A
bus bluetooth: add device acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl000AD9D7A99A'
bus bluetooth: remove device acl000AD9D7A99A
PM: Removing info for bluetooth:acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl000AD9D7A99A'
kobject acl000AD9D7A99A: cleaning up
DEV: registering device: ID = 'acl0017B066F14B'
kobject acl0017B066F14B: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl0017B066F14B
bus bluetooth: add device acl0017B066F14B
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl0017B066F14B'
bus bluetooth: remove device acl0017B066F14B
PM: Removing info for bluetooth:acl0017B066F14B
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl0017B066F14B'
kobject acl0017B066F14B: cleaning up
DEV: registering device: ID = 'acl006057BB4D92'
kobject acl006057BB4D92: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl006057BB4D92
bus bluetooth: add device acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl006057BB4D92'
DEV: registering device: ID = 'acl00126253F906'
kobject acl00126253F906: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl00126253F906
bus bluetooth: add device acl00126253F906
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00126253F906'
DEV: registering device: ID = 'acl00E0033364E5'
kobject acl00E0033364E5: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl00E0033364E5
bus bluetooth: add device acl00E0033364E5
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00E0033364E5'
bus bluetooth: remove device acl006057BB4D92
PM: Removing info for bluetooth:acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl006057BB4D92'
kobject acl006057BB4D92: cleaning up
bus bluetooth: remove device acl00126253F906
PM: Removing info for bluetooth:acl00126253F906
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00126253F906'
kobject acl00126253F906: cleaning up
DEV: registering device: ID = 'acl0060574FEB37'
kobject acl0060574FEB37: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl0060574FEB37
bus bluetooth: add device acl0060574FEB37
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl0060574FEB37'
DEV: registering device: ID = 'acl000AD9D7A99A'
kobject acl000AD9D7A99A: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl000AD9D7A99A
bus bluetooth: add device acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl000AD9D7A99A'
DEV: registering device: ID = 'rfcomm0'
kobject rfcomm0: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm0
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm0'
DEVICE: moving 'rfcomm0' to 'acl000AD9D7A99A'
fill_kobj_path: path = '/class/tty/rfcomm0'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm0'
DEV: registering device: ID = 'acl0017B066F14B'
kobject acl0017B066F14B: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl0017B066F14B
bus bluetooth: add device acl0017B066F14B
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl0017B066F14B'
bus bluetooth: remove device acl0017B066F14B
PM: Removing info for bluetooth:acl0017B066F14B
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl0017B066F14B'
kobject acl0017B066F14B: cleaning up
DEV: registering device: ID = 'acl0017B066F14B'
kobject acl0017B066F14B: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl0017B066F14B
bus bluetooth: add device acl0017B066F14B
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl0017B066F14B'
bus bluetooth: remove device acl00E0033364E5
PM: Removing info for bluetooth:acl00E0033364E5
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00E0033364E5'
kobject acl00E0033364E5: cleaning up
bus bluetooth: remove device acl000AD9D7A99A
PM: Removing info for bluetooth:acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl000AD9D7A99A'
DEVICE: moving 'rfcomm0' to '<NULL>'
fill_kobj_path: path = '/class/tty/rfcomm0'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm0'
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl000AD9D7A99A'
kobject acl000AD9D7A99A: cleaning up
DEV: Unregistering device. ID = 'rfcomm0'
PM: Removing info for No Bus:rfcomm0
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm0'
kobject rfcomm0: cleaning up
device_create_release called for rfcomm0
DEV: registering device: ID = 'acl006057BB4D92'
kobject acl006057BB4D92: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl006057BB4D92
bus bluetooth: add device acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl006057BB4D92'
DEV: registering device: ID = 'acl00E0033364E5'
kobject acl00E0033364E5: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl00E0033364E5
bus bluetooth: add device acl00E0033364E5
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00E0033364E5'
bus bluetooth: remove device acl0060574FEB37
PM: Removing info for bluetooth:acl0060574FEB37
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl0060574FEB37'
kobject acl0060574FEB37: cleaning up
DEV: registering device: ID = 'acl00126253F906'
kobject acl00126253F906: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl00126253F906
bus bluetooth: add device acl00126253F906
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00126253F906'
DEV: registering device: ID = 'acl0060574FEB37'
kobject acl0060574FEB37: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl0060574FEB37
bus bluetooth: add device acl0060574FEB37
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl0060574FEB37'
DEV: registering device: ID = 'acl000AD9D7A99A'
kobject acl000AD9D7A99A: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl000AD9D7A99A
bus bluetooth: add device acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl000AD9D7A99A'
DEV: registering device: ID = 'rfcomm0'
kobject rfcomm0: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm0
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm0'
DEVICE: moving 'rfcomm0' to 'acl0060574FEB37'
fill_kobj_path: path = '/class/tty/rfcomm0'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm0'
DEV: registering device: ID = 'rfcomm1'
kobject rfcomm1: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm1
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm1'
DEVICE: moving 'rfcomm1' to 'acl00E0033364E5'
fill_kobj_path: path = '/class/tty/rfcomm1'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm1'
DEV: registering device: ID = 'rfcomm2'
kobject rfcomm2: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm2
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm2'
DEVICE: moving 'rfcomm2' to 'acl0017B066F14B'
fill_kobj_path: path = '/class/tty/rfcomm2'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm2'
bus bluetooth: remove device acl000AD9D7A99A
PM: Removing info for bluetooth:acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl000AD9D7A99A'
kobject acl000AD9D7A99A: cleaning up
DEV: registering device: ID = 'rfcomm3'
kobject rfcomm3: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm3
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm3'
DEVICE: moving 'rfcomm3' to 'acl006057BB4D92'
fill_kobj_path: path = '/class/tty/rfcomm3'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm3'
hcidump[3694]: segfault at 0809ee89 eip 0805f3c7 esp bff25290 error 4
DEV: registering device: ID = 'rfcomm4'
kobject rfcomm4: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm4
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm4'
DEVICE: moving 'rfcomm4' to 'acl00126253F906'
fill_kobj_path: path = '/class/tty/rfcomm4'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm4'
hcidump[3699]: segfault at 080a8c48 eip 0805f3c7 esp bfcef4e0 error 4
DEVICE: moving 'rfcomm3' to '<NULL>'
fill_kobj_path: path = '/class/tty/rfcomm3'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm3'
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl006057BB4D92'
DEV: Unregistering device. ID = 'rfcomm3'
PM: Removing info for No Bus:rfcomm3
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm3'
kobject rfcomm3: cleaning up
device_create_release called for rfcomm3
bus bluetooth: remove device acl006057BB4D92
PM: Removing info for bluetooth:acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl006057BB4D92'
kobject acl006057BB4D92: cleaning up
bus bluetooth: remove device acl00126253F906
PM: Removing info for bluetooth:acl00126253F906
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00126253F906'
DEVICE: moving 'rfcomm4' to '<NULL>'
fill_kobj_path: path = '/class/tty/rfcomm4'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm4'
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00126253F906'
kobject acl00126253F906: cleaning up
DEV: Unregistering device. ID = 'rfcomm4'
PM: Removing info for No Bus:rfcomm4
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm4'
kobject rfcomm4: cleaning up
device_create_release called for rfcomm4
DEV: registering device: ID = 'acl000AD9D7A99A'
kobject acl000AD9D7A99A: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl000AD9D7A99A
bus bluetooth: add device acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl000AD9D7A99A'
DEV: registering device: ID = 'acl006057BB4D92'
kobject acl006057BB4D92: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl006057BB4D92
bus bluetooth: add device acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl006057BB4D92'
bus bluetooth: remove device acl000AD9D7A99A
PM: Removing info for bluetooth:acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl000AD9D7A99A'
kobject acl000AD9D7A99A: cleaning up
DEV: registering device: ID = 'acl000AD9D7A99A'
kobject acl000AD9D7A99A: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl000AD9D7A99A
bus bluetooth: add device acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl000AD9D7A99A'
bus bluetooth: remove device acl006057BB4D92
PM: Removing info for bluetooth:acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl006057BB4D92'
kobject acl006057BB4D92: cleaning up
DEV: registering device: ID = 'acl006057BB4D92'
kobject acl006057BB4D92: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl006057BB4D92
bus bluetooth: add device acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl006057BB4D92'
bus bluetooth: remove device acl000AD9D7A99A
PM: Removing info for bluetooth:acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl000AD9D7A99A'
kobject acl000AD9D7A99A: cleaning up
DEV: registering device: ID = 'acl000AD9D7A99A'
kobject acl000AD9D7A99A: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl000AD9D7A99A
bus bluetooth: add device acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl000AD9D7A99A'
DEV: registering device: ID = 'rfcomm3'
kobject rfcomm3: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm3
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm3'
DEVICE: moving 'rfcomm3' to 'acl006057BB4D92'
fill_kobj_path: path = '/class/tty/rfcomm3'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm3'
bus bluetooth: remove device acl000AD9D7A99A
PM: Removing info for bluetooth:acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl000AD9D7A99A'
kobject acl000AD9D7A99A: cleaning up
DEV: registering device: ID = 'acl00126253F906'
kobject acl00126253F906: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl00126253F906
bus bluetooth: add device acl00126253F906
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00126253F906'
bus bluetooth: remove device acl00126253F906
PM: Removing info for bluetooth:acl00126253F906
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00126253F906'
kobject acl00126253F906: cleaning up
DEV: registering device: ID = 'acl00126253F906'
kobject acl00126253F906: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl00126253F906
bus bluetooth: add device acl00126253F906
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00126253F906'
bus bluetooth: remove device acl0017B066F14B
PM: Removing info for bluetooth:acl0017B066F14B
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl0017B066F14B'
DEVICE: moving 'rfcomm2' to '<NULL>'
fill_kobj_path: path = '/class/tty/rfcomm2'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm2'
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl0017B066F14B'
kobject acl0017B066F14B: cleaning up
DEV: Unregistering device. ID = 'rfcomm2'
PM: Removing info for No Bus:rfcomm2
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm2'
kobject rfcomm2: cleaning up
device_create_release called for rfcomm2
DEV: registering device: ID = 'acl000AD9D7A99A'
kobject acl000AD9D7A99A: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl000AD9D7A99A
bus bluetooth: add device acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl000AD9D7A99A'
bus bluetooth: remove device acl00E0033364E5
PM: Removing info for bluetooth:acl00E0033364E5
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00E0033364E5'
DEV: registering device: ID = 'rfcomm2'
kobject rfcomm2: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm2
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm2'
DEVICE: moving 'rfcomm2' to 'acl00126253F906'
fill_kobj_path: path = '/class/tty/rfcomm2'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm2'
bus bluetooth: remove device acl000AD9D7A99A
PM: Removing info for bluetooth:acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl000AD9D7A99A'
kobject acl000AD9D7A99A: cleaning up
DEV: registering device: ID = 'acl000AD9D7A99A'
kobject acl000AD9D7A99A: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl000AD9D7A99A
bus bluetooth: add device acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl000AD9D7A99A'
DEV: registering device: ID = 'rfcomm4'
kobject rfcomm4: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm4
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm4'
DEVICE: moving 'rfcomm4' to 'acl000AD9D7A99A'
fill_kobj_path: path = '/class/tty/rfcomm4'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm4'
DEVICE: moving 'rfcomm1' to '<NULL>'
fill_kobj_path: path = '/class/tty/rfcomm1'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm1'
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00E0033364E5'
kobject acl00E0033364E5: cleaning up
DEV: Unregistering device. ID = 'rfcomm1'
PM: Removing info for No Bus:rfcomm1
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm1'
kobject rfcomm1: cleaning up
device_create_release called for rfcomm1
bus bluetooth: remove device acl00126253F906
PM: Removing info for bluetooth:acl00126253F906
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00126253F906'
DEV: Unregistering device. ID = 'rfcomm2'
PM: Removing info for No Bus:rfcomm2
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm2'
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00126253F906'
kobject acl00126253F906: cleaning up
kobject rfcomm2: cleaning up
device_create_release called for rfcomm2
DEV: registering device: ID = 'acl00126253F906'
kobject acl00126253F906: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl00126253F906
bus bluetooth: add device acl00126253F906
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00126253F906'
bus bluetooth: remove device acl00126253F906
PM: Removing info for bluetooth:acl00126253F906
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00126253F906'
kobject acl00126253F906: cleaning up
DEV: registering device: ID = 'acl00126253F906'
kobject acl00126253F906: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl00126253F906
bus bluetooth: add device acl00126253F906
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00126253F906'
=============================================================================
BUG kmalloc-128: Poison overwritten
-----------------------------------------------------------------------------
INFO: 0xc5734f28-0xc5734f40. First byte 0x6a instead of 0x6b
INFO: Allocated in rfcomm_dev_ioctl+0xbd/0x4e6 [rfcomm] age=6110 cpu=0
pid=3677
INFO: Freed in rfcomm_dev_destruct+0x59/0x65 [rfcomm] age=3157 cpu=0
pid=3927
INFO: Slab 0xc10ae680 used=21 fp=0xc5734f20 flags=0x400000c2
INFO: Object 0xc5734f20 @offset=3872 fp=0xc57342c0
Bytes b4 0xc5734f10: 05 00 00 00 f8 23 0f 00 5a 5a 5a 5a 5a 5a 5a 5a
....ø#..ZZZZZZZZ
Object 0xc5734f20: 6b 6b 6b 6b 6b 6b 6b 6b 6a 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkjkkkkkkk
Object 0xc5734f30: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 0xc5734f40: 6a 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
jkkkkkkkkkkkkkkk
Object 0xc5734f50: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 0xc5734f60: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 0xc5734f70: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 0xc5734f80: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 0xc5734f90: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5
kkkkkkkkkkkkkkk¥
Redzone 0xc5734fa0: bb bb bb bb
»»»»
Padding 0xc5734fc8: 5a 5a 5a 5a 5a 5a 5a 5a
ZZZZZZZZ
[<c0158fac>] check_bytes_and_report+0x91/0xb2
[<c0159214>] check_object+0xc5/0x1c0
[<c0159e51>] __slab_alloc+0x39e/0x3b1
[<c0159fb2>] kmem_cache_alloc+0x48/0x92
[<d02f8ac4>] rfcomm_dlc_alloc+0x15/0x5d [rfcomm]
[<d02f8ac4>] rfcomm_dlc_alloc+0x15/0x5d [rfcomm]
[<d02fa28d>] rfcomm_sock_alloc+0x4e/0xbb [rfcomm]
[<d02fa32a>] rfcomm_sock_create+0x30/0x46 [rfcomm]
[<d02000d4>] bt_sock_create+0x5a/0x7a [bluetooth]
[<c016c6ba>] new_inode+0x14/0x6d
[<c0246840>] __sock_create+0x109/0x189
[<c02468f4>] sock_create+0x18/0x1c
[<c0246a71>] sys_socket+0x1c/0x3e
[<c02472dd>] sys_socketcall+0x5d/0x242
[<c015b4b5>] filp_close+0x51/0x58
[<c015c54d>] sys_close+0x54/0x83
[<c0103c72>] syscall_call+0x7/0xb
=======================
FIX kmalloc-128: Restoring 0xc5734f28-0xc5734f40=0x6b
FIX kmalloc-128: Marking all objects used
bus bluetooth: remove device acl0060574FEB37
PM: Removing info for bluetooth:acl0060574FEB37
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl0060574FEB37'
DEVICE: moving 'rfcomm0' to '<NULL>'
fill_kobj_path: path = '/class/tty/rfcomm0'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm0'
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl0060574FEB37'
kobject acl0060574FEB37: cleaning up
DEV: Unregistering device. ID = 'rfcomm0'
PM: Removing info for No Bus:rfcomm0
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm0'
kobject rfcomm0: cleaning up
device_create_release called for rfcomm0
DEV: registering device: ID = 'rfcomm0'
kobject rfcomm0: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm0
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm0'
DEVICE: moving 'rfcomm0' to 'acl00126253F906'
fill_kobj_path: path = '/class/tty/rfcomm0'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm0'
bus bluetooth: remove device acl000AD9D7A99A
PM: Removing info for bluetooth:acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl000AD9D7A99A'
DEVICE: moving 'rfcomm4' to '<NULL>'
fill_kobj_path: path = '/class/tty/rfcomm4'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm4'
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl000AD9D7A99A'
kobject acl000AD9D7A99A: cleaning up
DEV: Unregistering device. ID = 'rfcomm4'
PM: Removing info for No Bus:rfcomm4
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm4'
kobject rfcomm4: cleaning up
device_create_release called for rfcomm4
DEV: Unregistering device. ID = 'rfcomm0'
PM: Removing info for No Bus:rfcomm0
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm0'
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00126253F906'
kobject rfcomm0: cleaning up
device_create_release called for rfcomm0
bus bluetooth: remove device acl00126253F906
PM: Removing info for bluetooth:acl00126253F906
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00126253F906'
kobject acl00126253F906: cleaning up
bus bluetooth: remove device acl006057BB4D92
PM: Removing info for bluetooth:acl006057BB4D92
kobject_uevent_env
=============================================================================
BUG kmalloc-128: Poison overwritten
-----------------------------------------------------------------------------
INFO: 0xc7575168-0xc7575180. First byte 0x6a instead of 0x6b
INFO: Allocated in kobject_uevent_env+0xd9/0x3e2 age=296 cpu=0 pid=5
INFO: Freed in kobject_uevent_env+0x3c6/0x3e2 age=288 cpu=0 pid=5
INFO: Slab 0xc10eaea0 used=5 fp=0xc7575160 flags=0x400000c2
INFO: Object 0xc7575160 @offset=352 fp=0xc7575420
Bytes b4 0xc7575150: d2 0d 00 00 bf 27 0f 00 5a 5a 5a 5a 5a 5a 5a 5a
Ò...¿'..ZZZZZZZZ
Object 0xc7575160: 6b 6b 6b 6b 6b 6b 6b 6b 6a 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkjkkkkkkk
Object 0xc7575170: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 0xc7575180: 6a 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
jkkkkkkkkkkkkkkk
Object 0xc7575190: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 0xc75751a0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 0xc75751b0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 0xc75751c0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 0xc75751d0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5
kkkkkkkkkkkkkkk¥
Redzone 0xc75751e0: bb bb bb bb
»»»»
Padding 0xc7575208: 5a 5a 5a 5a 5a 5a 5a 5a
ZZZZZZZZ
[<c0158fac>] check_bytes_and_report+0x91/0xb2
[<c0159214>] check_object+0xc5/0x1c0
[<c0159e51>] __slab_alloc+0x39e/0x3b1
[<c0159298>] check_object+0x149/0x1c0
[<c0159fb2>] kmem_cache_alloc+0x48/0x92
[<c01c6558>] kobject_uevent_env+0xd9/0x3e2
[<d0204cf2>] del_conn+0x0/0x8 [bluetooth]
[<c01c6558>] kobject_uevent_env+0xd9/0x3e2
[<c019204f>] release_sysfs_dirent+0x53/0x65
[<d0204cf2>] del_conn+0x0/0x8 [bluetooth]
[<c0229f83>] device_pm_remove+0x3f/0x6a
[<d0204cf2>] del_conn+0x0/0x8 [bluetooth]
[<c022597d>] device_del+0x203/0x22e
[<d0204cf2>] del_conn+0x0/0x8 [bluetooth]
[<c0127959>] run_workqueue+0x7d/0x103
[<c0127fae>] worker_thread+0x0/0xbe
[<c0128060>] worker_thread+0xb2/0xbe
[<c012a4dc>] autoremove_wake_function+0x0/0x35
[<c012a32f>] kthread+0x36/0x5b
[<c012a2f9>] kthread+0x0/0x5b
[<c0104e17>] kernel_thread_helper+0x7/0x10
=======================
FIX kmalloc-128: Restoring 0xc7575168-0xc7575180=0x6b
FIX kmalloc-128: Marking all objects used
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl006057BB4D92'
DEV: registering device: ID = 'acl00126253F906'
kobject acl00126253F906: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl00126253F906
bus bluetooth: add device acl00126253F906
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00126253F906'
bus bluetooth: remove device acl00126253F906
PM: Removing info for bluetooth:acl00126253F906
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00126253F906'
kobject acl00126253F906: cleaning up
DEVICE: moving 'rfcomm3' to '<NULL>'
fill_kobj_path: path = '/class/tty/rfcomm3'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm3'
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl006057BB4D92'
kobject acl006057BB4D92: cleaning up
DEV: Unregistering device. ID = 'rfcomm3'
PM: Removing info for No Bus:rfcomm3
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm3'
kobject rfcomm3: cleaning up
device_create_release called for rfcomm3
DEV: registering device: ID = 'acl00126253F906'
kobject acl00126253F906: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl00126253F906
bus bluetooth: add device acl00126253F906
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00126253F906'
DEV: registering device: ID = 'rfcomm0'
kobject rfcomm0: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm0
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm0'
DEVICE: moving 'rfcomm0' to 'acl00126253F906'
fill_kobj_path: path = '/class/tty/rfcomm0'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm0'
bus bluetooth: remove device acl00126253F906
PM: Removing info for bluetooth:acl00126253F906
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00126253F906'
DEVICE: moving 'rfcomm0' to '<NULL>'
fill_kobj_path: path = '/class/tty/rfcomm0'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm0'
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00126253F906'
kobject acl00126253F906: cleaning up
DEV: Unregistering device. ID = 'rfcomm0'
PM: Removing info for No Bus:rfcomm0
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm0'
kobject rfcomm0: cleaning up
device_create_release called for rfcomm0
DEV: registering device: ID = 'acl006057BB4D92'
kobject acl006057BB4D92: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl006057BB4D92
bus bluetooth: add device acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl006057BB4D92'
DEV: registering device: ID = 'acl000AD9D7A99A'
kobject acl000AD9D7A99A: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl000AD9D7A99A
bus bluetooth: add device acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl000AD9D7A99A'
DEV: registering device: ID = 'acl0017B066F14B'
kobject acl0017B066F14B: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl0017B066F14B
bus bluetooth: add device acl0017B066F14B
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl0017B066F14B'
DEV: registering device: ID = 'acl00E0033364E5'
kobject acl00E0033364E5: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl00E0033364E5
bus bluetooth: add device acl00E0033364E5
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00E0033364E5'
hcid[5554]: segfault at d6e62224 eip b7f65130 esp bfe76f60 error 4
bus bluetooth: remove device acl00E0033364E5
PM: Removing info for bluetooth:acl00E0033364E5
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00E0033364E5'
kobject acl00E0033364E5: cleaning up
bus bluetooth: remove device acl006057BB4D92
PM: Removing info for bluetooth:acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl006057BB4D92'
kobject acl006057BB4D92: cleaning up
bus bluetooth: remove device acl0017B066F14B
PM: Removing info for bluetooth:acl0017B066F14B
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl0017B066F14B'
kobject acl0017B066F14B: cleaning up
bus bluetooth: remove device acl000AD9D7A99A
PM: Removing info for bluetooth:acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl000AD9D7A99A'
kobject acl000AD9D7A99A: cleaning up
DEV: registering device: ID = 'acl0060574FEB37'
kobject acl0060574FEB37: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl0060574FEB37
bus bluetooth: add device acl0060574FEB37
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl0060574FEB37'
bus bluetooth: remove device acl0060574FEB37
PM: Removing info for bluetooth:acl0060574FEB37
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl0060574FEB37'
kobject acl0060574FEB37: cleaning up
DEV: registering device: ID = 'acl0017B066F14B'
kobject acl0017B066F14B: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl0017B066F14B
bus bluetooth: add device acl0017B066F14B
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl0017B066F14B'
bus bluetooth: remove device acl0017B066F14B
PM: Removing info for bluetooth:acl0017B066F14B
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl0017B066F14B'
kobject acl0017B066F14B: cleaning up
DEV: registering device: ID = 'acl00E0033364E5'
kobject acl00E0033364E5: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl00E0033364E5
bus bluetooth: add device acl00E0033364E5
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl00E0033364E5'
bus bluetooth: remove device acl00E0033364E5
PM: Removing info for bluetooth:acl00E0033364E5
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl00E0033364E5'
kobject acl00E0033364E5: cleaning up
DEV: registering device: ID = 'acl00126253F906'
kobject acl00126253F906: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl00126253F906
bus bluetooth: add device acl00126253F906
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00126253F906'
bus bluetooth: remove device acl00126253F906
PM: Removing info for bluetooth:acl00126253F906
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00126253F906'
kobject acl00126253F906: cleaning up
DEV: registering device: ID = 'acl000AD9D7A99A'
kobject acl000AD9D7A99A: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl000AD9D7A99A
bus bluetooth: add device acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl000AD9D7A99A'
DEV: registering device: ID = 'acl006057BB4D92'
kobject acl006057BB4D92: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl006057BB4D92
bus bluetooth: add device acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl006057BB4D92'
bus bluetooth: remove device acl006057BB4D92
PM: Removing info for bluetooth:acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl006057BB4D92'
kobject acl006057BB4D92: cleaning up
bus bluetooth: remove device acl000AD9D7A99A
PM: Removing info for bluetooth:acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl000AD9D7A99A'
kobject acl000AD9D7A99A: cleaning up
DEV: registering device: ID = 'acl006057BB4D92'
kobject acl006057BB4D92: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl006057BB4D92
bus bluetooth: add device acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl006057BB4D92'
DEV: registering device: ID = 'acl000AD9D7A99A'
kobject acl000AD9D7A99A: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl000AD9D7A99A
bus bluetooth: add device acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl000AD9D7A99A'
bus bluetooth: remove device acl006057BB4D92
PM: Removing info for bluetooth:acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl006057BB4D92'
kobject acl006057BB4D92: cleaning up
bus bluetooth: remove device acl000AD9D7A99A
PM: Removing info for bluetooth:acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl000AD9D7A99A'
kobject acl000AD9D7A99A: cleaning up
DEV: registering device: ID = 'acl006057BB4D92'
kobject acl006057BB4D92: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl006057BB4D92
bus bluetooth: add device acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl006057BB4D92'
bus bluetooth: remove device acl006057BB4D92
PM: Removing info for bluetooth:acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl006057BB4D92'
kobject acl006057BB4D92: cleaning up
DEV: registering device: ID = 'acl000AD9D7A99A'
kobject acl000AD9D7A99A: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl000AD9D7A99A
bus bluetooth: add device acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl000AD9D7A99A'
bus bluetooth: remove device acl000AD9D7A99A
PM: Removing info for bluetooth:acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl000AD9D7A99A'
kobject acl000AD9D7A99A: cleaning up
DEV: registering device: ID = 'acl0060574FEB37'
kobject acl0060574FEB37: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl0060574FEB37
bus bluetooth: add device acl0060574FEB37
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl0060574FEB37'
DEV: registering device: ID = 'acl0017B066F14B'
kobject acl0017B066F14B: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl0017B066F14B
bus bluetooth: add device acl0017B066F14B
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl0017B066F14B'
DEV: registering device: ID = 'acl00E0033364E5'
kobject acl00E0033364E5: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl00E0033364E5
bus bluetooth: add device acl00E0033364E5
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl00E0033364E5'
DEV: registering device: ID = 'rfcomm0'
kobject rfcomm0: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm0
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm0'
DEVICE: moving 'rfcomm0' to 'acl0060574FEB37'
fill_kobj_path: path = '/class/tty/rfcomm0'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm0'
DEV: registering device: ID = 'rfcomm1'
kobject rfcomm1: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm1
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm1'
DEVICE: moving 'rfcomm1' to 'acl00E0033364E5'
fill_kobj_path: path = '/class/tty/rfcomm1'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm1'
DEV: registering device: ID = 'acl0007E0B37003'
kobject acl0007E0B37003: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl0007E0B37003
bus bluetooth: add device acl0007E0B37003
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl0007E0B37003'
DEV: registering device: ID = 'rfcomm2'
kobject rfcomm2: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm2
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm2'
DEVICE: moving 'rfcomm2' to 'acl0017B066F14B'
fill_kobj_path: path = '/class/tty/rfcomm2'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm2'
bus bluetooth: remove device acl0007E0B37003
PM: Removing info for bluetooth:acl0007E0B37003
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl0007E0B37003'
kobject acl0007E0B37003: cleaning up
DEV: registering device: ID = 'acl000AD9D7A99A'
kobject acl000AD9D7A99A: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl000AD9D7A99A
bus bluetooth: add device acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl000AD9D7A99A'
DEV: registering device: ID = 'rfcomm3'
kobject rfcomm3: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm3
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm3'
DEVICE: moving 'rfcomm3' to 'acl000AD9D7A99A'
fill_kobj_path: path = '/class/tty/rfcomm3'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm3'
DEV: registering device: ID = 'acl00126253F906'
kobject acl00126253F906: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl00126253F906
bus bluetooth: add device acl00126253F906
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00126253F906'
bus bluetooth: remove device acl00126253F906
PM: Removing info for bluetooth:acl00126253F906
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00126253F906'
kobject acl00126253F906: cleaning up
DEV: registering device: ID = 'acl00126253F906'
kobject acl00126253F906: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl00126253F906
bus bluetooth: add device acl00126253F906
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00126253F906'
DEV: registering device: ID = 'acl006057BB4D92'
kobject acl006057BB4D92: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl006057BB4D92
bus bluetooth: add device acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl006057BB4D92'
DEV: registering device: ID = 'rfcomm4'
kobject rfcomm4: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm4
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm4'
DEVICE: moving 'rfcomm4' to 'acl00126253F906'
fill_kobj_path: path = '/class/tty/rfcomm4'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm4'
DEV: registering device: ID = 'rfcomm5'
kobject rfcomm5: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm5
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm5'
DEVICE: moving 'rfcomm5' to 'acl006057BB4D92'
fill_kobj_path: path = '/class/tty/rfcomm5'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm5'
hcidump[5701]: segfault at 080a9dc4 eip 0805f3c7 esp bfd11d00 error 4
bus bluetooth: remove device acl006057BB4D92
PM: Removing info for bluetooth:acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl006057BB4D92'
DEVICE: moving 'rfcomm5' to '<NULL>'
fill_kobj_path: path = '/class/tty/rfcomm5'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm5'
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl006057BB4D92'
kobject acl006057BB4D92: cleaning up
DEV: Unregistering device. ID = 'rfcomm5'
PM: Removing info for No Bus:rfcomm5
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm5'
kobject rfcomm5: cleaning up
device_create_release called for rfcomm5
bus bluetooth: remove device acl00E0033364E5
PM: Removing info for bluetooth:acl00E0033364E5
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl00E0033364E5'
DEVICE: moving 'rfcomm1' to '<NULL>'
fill_kobj_path: path = '/class/tty/rfcomm1'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm1'
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl00E0033364E5'
kobject acl00E0033364E5: cleaning up
DEV: Unregistering device. ID = 'rfcomm1'
PM: Removing info for No Bus:rfcomm1
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm1'
kobject rfcomm1: cleaning up
device_create_release called for rfcomm1
bus bluetooth: remove device acl000AD9D7A99A
PM: Removing info for bluetooth:acl000AD9D7A99A
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl000AD9D7A99A'
DEVICE: moving 'rfcomm3' to '<NULL>'
fill_kobj_path: path = '/class/tty/rfcomm3'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm3'
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl000AD9D7A99A'
kobject acl000AD9D7A99A: cleaning up
DEV: Unregistering device. ID = 'rfcomm3'
PM: Removing info for No Bus:rfcomm3
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm3'
kobject rfcomm3: cleaning up
device_create_release called for rfcomm3
DEV: registering device: ID = 'acl006057BB4D92'
kobject acl006057BB4D92: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl006057BB4D92
bus bluetooth: add device acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl006057BB4D92'
bus bluetooth: remove device acl006057BB4D92
PM: Removing info for bluetooth:acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl006057BB4D92'
kobject acl006057BB4D92: cleaning up
DEV: registering device: ID = 'acl006057BB4D92'
kobject acl006057BB4D92: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl006057BB4D92
bus bluetooth: add device acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl006057BB4D92'
bus bluetooth: remove device acl0017B066F14B
PM: Removing info for bluetooth:acl0017B066F14B
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl0017B066F14B'
DEVICE: moving 'rfcomm2' to '<NULL>'
fill_kobj_path: path = '/class/tty/rfcomm2'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm2'
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl0017B066F14B'
kobject acl0017B066F14B: cleaning up
DEV: Unregistering device. ID = 'rfcomm2'
PM: Removing info for No Bus:rfcomm2
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm2'
kobject rfcomm2: cleaning up
device_create_release called for rfcomm2
bus bluetooth: remove device acl006057BB4D92
PM: Removing info for bluetooth:acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl006057BB4D92'
kobject acl006057BB4D92: cleaning up
DEV: registering device: ID = 'acl006057BB4D92'
kobject acl006057BB4D92: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl006057BB4D92
bus bluetooth: add device acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl006057BB4D92'
bus bluetooth: remove device acl006057BB4D92
PM: Removing info for bluetooth:acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl006057BB4D92'
kobject acl006057BB4D92: cleaning up
DEV: registering device: ID = 'acl006057BB4D92'
kobject acl006057BB4D92: registering. parent: hci2, set: devices
PM: Adding info for bluetooth:acl006057BB4D92
bus bluetooth: add device acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl006057BB4D92'
bus bluetooth: remove device acl0060574FEB37
PM: Removing info for bluetooth:acl0060574FEB37
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl0060574FEB37'
DEVICE: moving 'rfcomm0' to '<NULL>'
fill_kobj_path: path = '/class/tty/rfcomm0'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm0'
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl0060574FEB37'
kobject acl0060574FEB37: cleaning up
DEV: Unregistering device. ID = 'rfcomm0'
PM: Removing info for No Bus:rfcomm0
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm0'
kobject rfcomm0: cleaning up
device_create_release called for rfcomm0
DEV: registering device: ID = 'rfcomm0'
kobject rfcomm0: registering. parent: tty, set: devices
PM: Adding info for No Bus:rfcomm0
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm0'
DEVICE: moving 'rfcomm0' to 'acl006057BB4D92'
fill_kobj_path: path = '/class/tty/rfcomm0'
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm0'
DEV: registering device: ID = 'acl0007E0B37003'
kobject acl0007E0B37003: registering. parent: hci1, set: devices
PM: Adding info for bluetooth:acl0007E0B37003
bus bluetooth: add device acl0007E0B37003
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl0007E0B37003'
bus bluetooth: remove device acl0007E0B37003
PM: Removing info for bluetooth:acl0007E0B37003
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/hci1/acl0007E0B37003'
kobject acl0007E0B37003: cleaning up
DEV: Unregistering device. ID = 'rfcomm0'
PM: Removing info for No Bus:rfcomm0
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm0'
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl006057BB4D92'
kobject rfcomm0: cleaning up
device_create_release called for rfcomm0
bus bluetooth: remove device acl006057BB4D92
PM: Removing info for bluetooth:acl006057BB4D92
kobject_uevent_env
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl006057BB4D92'
kobject acl006057BB4D92: cleaning up
BUG: unable to handle kernel paging request at virtual address 6b6b6b77
printing eip:
c0249964
*pde = 00000000
Oops: 0000 [#1]
Modules linked in: rfcomm l2cap battery ipv6 dm_snapshot dm_mirror
dm_mod softdog loop parport_pc parport psmouse serio_raw floppy pcspkr
rtc ac button snd_cs5535audio snd_ac97_codec ac97_bus snd_pcm snd_timer
snd soundcore snd_page_alloc geode_rng hci_usb cs5535_gpio bluetooth
geode_aes blkcipher tsdev evdev reiserfs usbhid hid ide_disk generic
amd74xx ohci_hcd ide_core sata_via ata_generic 8139cp libata usbcore
8139too mii scsi_mod thermal processor fan
CPU: 0
EIP: 0060:[<c0249964>] Not tainted VLI
EFLAGS: 00010016 (2.6.23-rc8 #3)
EIP is at skb_dequeue+0x19/0x4a
eax: 00000216 ebx: 00000216 ecx: 00000000 edx: 6b6b6b77
esi: c7ff0dd8 edi: c7ff0c90 ebp: c7ff0c9c esp: c1251f60
ds: 007b es: 007b fs: 0000 gs: 0000 ss: 0068
Process events/0 (pid: 5, ti=c1250000 task=c12455c0 task.ti=c1250000)
Stack: 6b6b6b77 c024abe6 c7ff0c90 d02fb05d c7ff0df0 c020e754 c75152d8
00000000
00000000 00000000 cf7a2630 c7ff0dd8 c020e68b 00000000 c0127959
c1251fb4
00000046 c12455c0 cf7a2630 cf7a2630 c0127fae c1251fd0 c0128060
00000000
Call Trace:
[<c024abe6>] skb_queue_purge+0x11/0x17
[<d02fb05d>] rfcomm_tty_flush_buffer+0x1c/0x33 [rfcomm]
[<c020e754>] do_tty_hangup+0xc9/0x2d0
[<c020e68b>] do_tty_hangup+0x0/0x2d0
[<c0127959>] run_workqueue+0x7d/0x103
[<c0127fae>] worker_thread+0x0/0xbe
[<c0128060>] worker_thread+0xb2/0xbe
[<c012a4dc>] autoremove_wake_function+0x0/0x35
[<c012a32f>] kthread+0x36/0x5b
[<c012a2f9>] kthread+0x0/0x5b
[<c0104e17>] kernel_thread_helper+0x7/0x10
=======================
Code: 93 a0 00 00 00 66 8b 40 0a 66 89 42 0a 5b 5e 5f 5d c3 53 89 c2 9c
58 90 8d b4 26 00 00 00 00 89 c3 fa 90 8d b4 26 00 00 00 00 90 <8b> 0a
39 d1 75 04 31 c9 eb 17 8b 01 ff 4a 08 89 02 89 50 04 c7
EIP: [<c0249964>] skb_dequeue+0x19/0x4a SS:ESP 0068:c1251f60
=============================================================================
BUG kmalloc-128: Poison overwritten
-----------------------------------------------------------------------------
INFO: 0xc04d0c68-0xc04d0c80. First byte 0x6a instead of 0x6b
INFO: Allocated in kobject_uevent_env+0xd9/0x3e2 age=1432 cpu=0 pid=5
INFO: Freed in kobject_uevent_env+0x3c6/0x3e2 age=1424 cpu=0 pid=5
INFO: Slab 0xc1009a00 used=21 fp=0xc04d0c60 flags=0x00c2
INFO: Object 0xc04d0c60 @offset=3168 fp=0xc04d0b00
Bytes b4 0xc04d0c50: 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a
........ZZZZZZZZ
Object 0xc04d0c60: 6b 6b 6b 6b 6b 6b 6b 6b 6a 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkjkkkkkkk
Object 0xc04d0c70: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 0xc04d0c80: 6a 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
jkkkkkkkkkkkkkkk
Object 0xc04d0c90: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 0xc04d0ca0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 0xc04d0cb0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 0xc04d0cc0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 0xc04d0cd0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5
kkkkkkkkkkkkkkk¥
Redzone 0xc04d0ce0: bb bb bb bb
»»»»
Padding 0xc04d0d08: 5a 5a 5a 5a 5a 5a 5a 5a
ZZZZZZZZ
[<c0158fac>] check_bytes_and_report+0x91/0xb2
[<c0159214>] check_object+0xc5/0x1c0
[<c0159e51>] __slab_alloc+0x39e/0x3b1
[<c0159fb2>] kmem_cache_alloc+0x48/0x92
[<d01568d2>] alloc_journal_list+0x13/0x66 [reiserfs]
[<d01568d2>] alloc_journal_list+0x13/0x66 [reiserfs]
[<d015819e>] do_journal_end+0x7e7/0xb5b [reiserfs]
[<d0158572>] journal_end_sync+0x60/0x65 [reiserfs]
[<d014a25d>] reiserfs_sync_fs+0x2d/0x44 [reiserfs]
[<c015e565>] sync_supers+0x3e/0x6a
[<c0147a1e>] pdflush+0x0/0x194
[<c01476f6>] wb_kupdate+0x23/0xd2
[<c0147a1e>] pdflush+0x0/0x194
[<c0147b1c>] pdflush+0xfe/0x194
[<c02a8266>] __sched_text_start+0x1d6/0x245
[<c01476d3>] wb_kupdate+0x0/0xd2
[<c012a32f>] kthread+0x36/0x5b
[<c012a2f9>] kthread+0x0/0x5b
[<c0104e17>] kernel_thread_helper+0x7/0x10
=======================
FIX kmalloc-128: Restoring 0xc04d0c68-0xc04d0c80=0x6b
FIX kmalloc-128: Marking all objects used
DEV: Unregistering device. ID = 'rfcomm4'
PM: Removing info for No Bus:rfcomm4
kobject_uevent_env
fill_kobj_path: path = '/class/tty/rfcomm4'
fill_kobj_path: path =
'/devices/pci0000:00/0000:00:0f.4/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/hci2/acl00126253F906'
kobject rfcomm4: cleaning up
device_create_release called for rfcomm4
=============================================================================
BUG kmalloc-128: Poison overwritten
-----------------------------------------------------------------------------
INFO: 0xc04d02c8-0xc04d02e0. First byte 0x6a instead of 0x6b
INFO: Allocated in rfcomm_dev_ioctl+0xbd/0x4e6 [rfcomm] age=31493 cpu=0
pid=5679
INFO: Freed in rfcomm_dev_destruct+0x59/0x65 [rfcomm] age=9707 cpu=0
pid=5679
INFO: Slab 0xc1009a00 used=21 fp=0xc04d02c0 flags=0x00c2
INFO: Object 0xc04d02c0 @offset=704 fp=0xc04d0160
Bytes b4 0xc04d02b0: 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a
........ZZZZZZZZ
Object 0xc04d02c0: 6b 6b 6b 6b 6b 6b 6b 6b 6a 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkjkkkkkkk
Object 0xc04d02d0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 0xc04d02e0: 6a 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
jkkkkkkkkkkkkkkk
Object 0xc04d02f0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 0xc04d0300: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 0xc04d0310: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 0xc04d0320: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
kkkkkkkkkkkkkkkk
Object 0xc04d0330: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5
kkkkkkkkkkkkkkk¥
Redzone 0xc04d0340: bb bb bb bb
»»»»
Padding 0xc04d0368: 5a 5a 5a 5a 5a 5a 5a 5a
ZZZZZZZZ
[<c0158fac>] check_bytes_and_report+0x91/0xb2
[<c0159214>] check_object+0xc5/0x1c0
[<c0159e51>] __slab_alloc+0x39e/0x3b1
[<c0159fb2>] kmem_cache_alloc+0x48/0x92
[<d01568d2>] alloc_journal_list+0x13/0x66 [reiserfs]
[<d01568d2>] alloc_journal_list+0x13/0x66 [reiserfs]
[<d015819e>] do_journal_end+0x7e7/0xb5b [reiserfs]
[<c011706e>] update_curr_load+0x6e/0x83
[<d0158572>] journal_end_sync+0x60/0x65 [reiserfs]
[<d014a25d>] reiserfs_sync_fs+0x2d/0x44 [reiserfs]
[<c015e565>] sync_supers+0x3e/0x6a
[<c0147a1e>] pdflush+0x0/0x194
[<c01476f6>] wb_kupdate+0x23/0xd2
[<c0147a1e>] pdflush+0x0/0x194
[<c0147b1c>] pdflush+0xfe/0x194
[<c02a8266>] __sched_text_start+0x1d6/0x245
[<c01476d3>] wb_kupdate+0x0/0xd2
[<c012a32f>] kthread+0x36/0x5b
[<c012a2f9>] kthread+0x0/0x5b
[<c0104e17>] kernel_thread_helper+0x7/0x10
=======================
FIX kmalloc-128: Restoring 0xc04d02c8-0xc04d02e0=0x6b
FIX kmalloc-128: Marking all objects used
DEV: Unregistering device. ID = 'vcs1'
PM: Removing info for No Bus:vcs1
kobject_uevent_env
fill_kobj_path: path = '/class/vc/vcs1'
kobject vcs1: cleaning up
device_create_release called for vcs1
DEV: Unregistering device. ID = 'vcsa1'
PM: Removing info for No Bus:vcsa1
kobject_uevent_env
fill_kobj_path: path = '/class/vc/vcsa1'
kobject vcsa1: cleaning up
device_create_release called for vcsa1
DEV: Unregistering device. ID = 'vcs2'
PM: Removing info for No Bus:vcs2
kobject_uevent_env
fill_kobj_path: path = '/class/vc/vcs2'
kobject vcs2: cleaning up
device_create_release called for vcs2
DEV: Unregistering device. ID = 'vcsa2'
PM: Removing info for No Bus:vcsa2
kobject_uevent_env
fill_kobj_path: path = '/class/vc/vcsa2'
kobject vcsa2: cleaning up
device_create_release called for vcsa2
DEV: Unregistering device. ID = 'vcs4'
PM: Removing info for No Bus:vcs4
kobject_uevent_env
fill_kobj_path: path = '/class/vc/vcs4'
kobject vcs4: cleaning up
device_create_release called for vcs4
DEV: Unregistering device. ID = 'vcsa4'
PM: Removing info for No Bus:vcsa4
kobject_uevent_env
fill_kobj_path: path = '/class/vc/vcsa4'
kobject vcsa4: cleaning up
device_create_release called for vcsa4
DEV: Unregistering device. ID = 'vcs5'
PM: Removing info for No Bus:vcs5
kobject_uevent_env
fill_kobj_path: path = '/class/vc/vcs5'
kobject vcs5: cleaning up
device_create_release called for vcs5
DEV: Unregistering device. ID = 'vcsa5'
PM: Removing info for No Bus:vcsa5
kobject_uevent_env
fill_kobj_path: path = '/class/vc/vcsa5'
kobject vcsa5: cleaning up
device_create_release called for vcsa5
DEV: Unregistering device. ID = 'vcs3'
PM: Removing info for No Bus:vcs3
kobject_uevent_env
fill_kobj_path: path = '/class/vc/vcs3'
kobject vcs3: cleaning up
device_create_release called for vcs3
DEV: Unregistering device. ID = 'vcsa3'
PM: Removing info for No Bus:vcsa3
kobject_uevent_env
fill_kobj_path: path = '/class/vc/vcsa3'
kobject vcsa3: cleaning up
device_create_release called for vcsa3
DEV: Unregistering device. ID = 'vcs6'
PM: Removing info for No Bus:vcs6
kobject_uevent_env
fill_kobj_path: path = '/class/vc/vcs6'
kobject vcs6: cleaning up
device_create_release called for vcs6
DEV: Unregistering device. ID = 'vcsa6'
PM: Removing info for No Bus:vcsa6
kobject_uevent_env
fill_kobj_path: path = '/class/vc/vcsa6'
kobject vcsa6: cleaning up
device_create_release called for vcsa6
Restarting system.
next prev parent reply other threads:[~2007-09-27 18:07 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-25 15:04 [Bluez-devel] Warnings and Oops on 2.6.23-rc6 while activily using rfcomm links (mm/slab.c) Pierre-Yves Paulus
2007-09-25 15:04 ` Pierre-Yves Paulus
2007-09-25 15:32 ` [Bluez-devel] " Cornelia Huck
2007-09-25 15:32 ` Cornelia Huck
2007-09-25 18:26 ` [Bluez-devel] " Chuck Ebbert
2007-09-25 18:26 ` Chuck Ebbert
2007-09-26 13:27 ` [Bluez-devel] " Pierre-Yves Paulus
2007-09-26 13:27 ` Pierre-Yves Paulus
2007-09-27 6:56 ` [Bluez-devel] " Cornelia Huck
2007-09-27 6:56 ` Cornelia Huck
2007-09-27 14:43 ` [Bluez-devel] " Pierre-Yves Paulus
2007-09-27 14:43 ` Pierre-Yves Paulus
2007-09-27 18:07 ` Pierre-Yves Paulus [this message]
2007-09-27 18:07 ` Pierre-Yves Paulus
2007-09-28 6:54 ` [Bluez-devel] " Cornelia Huck
2007-09-28 6:54 ` Cornelia Huck
2007-09-28 14:38 ` [Bluez-devel] " Pierre-Yves Paulus
2007-09-28 14:38 ` Pierre-Yves Paulus
2007-09-28 14:57 ` [Bluez-devel] " Pierre-Yves Paulus
2007-09-28 14:57 ` Pierre-Yves Paulus
2007-09-28 16:32 ` Pierre-Yves Paulus
2007-10-01 12:32 ` Cornelia Huck
2007-11-06 2:46 ` Dave Young
2007-09-26 22:16 ` [Bluez-devel] " Marcel Holtmann
2007-09-26 22:16 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46FBF17A.6030009@idlum.be \
--to=py@idlum.be \
--cc=bluez-devel@lists.sourceforge.net \
--cc=cebbert@redhat.com \
--cc=cornelia.huck@de.ibm.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.