From: Boaz Harrosh <bharrosh@panasas.com>
To: Christoph Hellwig <hch@infradead.org>,
Jeff Garzik <jeff@garzik.org>,
James Bottomley <James.Bottomley@SteelEye.com>,
Matthew Wilcox <willy@linux.intel.com>,
achim_leubner@adaptec.com
Cc: linux-scsi <linux-scsi@vger.kernel.org>
Subject: [PATCH 2/16] gdth: split out eisa probing
Date: Sun, 30 Sep 2007 21:50:57 +0200 [thread overview]
Message-ID: <46FFFE21.4030902@panasas.com> (raw)
In-Reply-To: <46FFFC8C.6080804@panasas.com>
Split eisa probing into it's own helper, and do proper error unwinding.
Protect EISA probind by the proper CONFIG_EISA symbol.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/scsi/gdth.c | 270 ++++++++++++++++++++++++++++-----------------------
1 files changed, 150 insertions(+), 120 deletions(-)
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index 9f82c01..5240acd 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -479,6 +479,9 @@ static void gdth_scsi_done(struct scsi_cmnd *scp);
#ifdef CONFIG_ISA
static int gdth_isa_probe_one(struct scsi_host_template *, ulong32);
#endif
+#ifdef CONFIG_EISA
+static int gdth_eisa_probe_one(struct scsi_host_template *, ushort);
+#endif
#ifdef DEBUG_GDTH
static unchar DebugState = DEBUG_GDTH;
@@ -4335,129 +4338,14 @@ static int __init gdth_detect(Scsi_Host_Template *shtp)
gdth_isa_probe_one(shtp, isa_bios);
}
#endif
-
- for (eisa_slot=0x1000; eisa_slot<=0x8000; eisa_slot+=0x1000) {
- dma_addr_t scratch_dma_handle;
- scratch_dma_handle = 0;
-
- if (gdth_ctr_count >= MAXHA)
+#ifdef CONFIG_EISA
+ for (eisa_slot = 0x1000; eisa_slot <= 0x8000; eisa_slot += 0x1000) {
+ if (gdth_ctr_count >= MAXHA)
break;
- if (gdth_search_eisa(eisa_slot)) { /* controller found */
- shp = scsi_register(shtp,sizeof(gdth_ext_str));
- if (shp == NULL)
- continue;
-
- ha = HADATA(shp);
- if (!gdth_init_eisa(eisa_slot,ha)) {
- scsi_unregister(shp);
- continue;
- }
- /* controller found and initialized */
- printk("Configuring GDT-EISA HA at Slot %d IRQ %u\n",
- eisa_slot>>12,ha->irq);
-
- if (request_irq(ha->irq,gdth_interrupt,IRQF_DISABLED,"gdth",ha)) {
- printk("GDT-EISA: Unable to allocate IRQ\n");
- scsi_unregister(shp);
- continue;
- }
- shp->unchecked_isa_dma = 0;
- shp->irq = ha->irq;
- shp->dma_channel = 0xff;
- hanum = gdth_ctr_count;
- gdth_ctr_tab[gdth_ctr_count++] = shp;
- gdth_ctr_vtab[gdth_ctr_vcount++] = shp;
-
- NUMDATA(shp)->hanum = (ushort)hanum;
- NUMDATA(shp)->busnum= 0;
- TRACE2(("EISA detect Bus 0: hanum %d\n",
- NUMDATA(shp)->hanum));
-
- ha->pccb = CMDDATA(shp);
- ha->ccb_phys = 0L;
-
- ha->pdev = NULL;
- ha->pscratch = pci_alloc_consistent(ha->pdev, GDTH_SCRATCH,
- &scratch_dma_handle);
- ha->scratch_phys = scratch_dma_handle;
- ha->pmsg = pci_alloc_consistent(ha->pdev, sizeof(gdth_msg_str),
- &scratch_dma_handle);
- ha->msg_phys = scratch_dma_handle;
-#ifdef INT_COAL
- ha->coal_stat = (gdth_coal_status *)
- pci_alloc_consistent(ha->pdev, sizeof(gdth_coal_status) *
- MAXOFFSETS, &scratch_dma_handle);
- ha->coal_stat_phys = scratch_dma_handle;
-#endif
- ha->ccb_phys =
- pci_map_single(ha->pdev,ha->pccb,
- sizeof(gdth_cmd_str),PCI_DMA_BIDIRECTIONAL);
- ha->scratch_busy = FALSE;
- ha->req_first = NULL;
- ha->tid_cnt = MAX_HDRIVES;
- if (max_ids > 0 && max_ids < ha->tid_cnt)
- ha->tid_cnt = max_ids;
- for (i=0; i<GDTH_MAXCMDS; ++i)
- ha->cmd_tab[i].cmnd = UNUSED_CMND;
- ha->scan_mode = rescan ? 0x10 : 0;
-
- if (ha->pscratch == NULL || ha->pmsg == NULL ||
- !gdth_search_drives(hanum)) {
- printk("GDT-EISA: Error during device scan\n");
- --gdth_ctr_count;
- --gdth_ctr_vcount;
-#ifdef INT_COAL
- if (ha->coal_stat)
- pci_free_consistent(ha->pdev, sizeof(gdth_coal_status) *
- MAXOFFSETS, ha->coal_stat,
- ha->coal_stat_phys);
-#endif
- if (ha->pscratch)
- pci_free_consistent(ha->pdev, GDTH_SCRATCH,
- ha->pscratch, ha->scratch_phys);
- if (ha->pmsg)
- pci_free_consistent(ha->pdev, sizeof(gdth_msg_str),
- ha->pmsg, ha->msg_phys);
- if (ha->ccb_phys)
- pci_unmap_single(ha->pdev,ha->ccb_phys,
- sizeof(gdth_cmd_str),PCI_DMA_BIDIRECTIONAL);
- free_irq(ha->irq,ha);
- scsi_unregister(shp);
- continue;
- }
- if (hdr_channel < 0 || hdr_channel > ha->bus_cnt)
- hdr_channel = ha->bus_cnt;
- ha->virt_bus = hdr_channel;
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20) && \
- LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
- shp->highmem_io = 0;
-#endif
- if (ha->cache_feat & ha->raw_feat & ha->screen_feat & GDT_64BIT)
- shp->max_cmd_len = 16;
-
- shp->max_id = ha->tid_cnt;
- shp->max_lun = MAXLUN;
- shp->max_channel = virt_ctr ? 0 : ha->bus_cnt;
- if (virt_ctr) {
- virt_ctr = 1;
- /* register addit. SCSI channels as virtual controllers */
- for (b = 1; b < ha->bus_cnt + 1; ++b) {
- shp = scsi_register(shtp,sizeof(gdth_num_str));
- shp->unchecked_isa_dma = 0;
- shp->irq = ha->irq;
- shp->dma_channel = 0xff;
- gdth_ctr_vtab[gdth_ctr_vcount++] = shp;
- NUMDATA(shp)->hanum = (ushort)hanum;
- NUMDATA(shp)->busnum = b;
- }
- }
-
- spin_lock_init(&ha->smp_lock);
- gdth_enable_int(hanum);
- }
+ gdth_eisa_probe_one(shtp, eisa_slot);
}
}
+#endif
/* scanning for PCI controllers */
cnt = gdth_search_pci(pcistr);
@@ -5694,6 +5582,148 @@ static int gdth_isa_probe_one(struct scsi_host_template *shtp, ulong32 isa_bios)
}
#endif /* CONFIG_ISA */
+#ifdef CONFIG_EISA
+static int gdth_eisa_probe_one(struct scsi_host_template *shtp,
+ ushort eisa_slot)
+{
+ struct Scsi_Host *shp;
+ gdth_ha_str *ha;
+ dma_addr_t scratch_dma_handle = 0;
+ int error, hanum, i;
+ u8 b;
+
+ if (!gdth_search_eisa(eisa_slot))
+ return -ENXIO;
+
+ shp = scsi_register(shtp,sizeof(gdth_ext_str));
+ if (!shp)
+ return -ENOMEM;
+ ha = HADATA(shp);
+
+ error = -ENODEV;
+ if (!gdth_init_eisa(eisa_slot,ha))
+ goto out_host_put;
+
+ /* controller found and initialized */
+ printk("Configuring GDT-EISA HA at Slot %d IRQ %u\n",
+ eisa_slot >> 12, ha->irq);
+
+ error = request_irq(ha->irq, gdth_interrupt, IRQF_DISABLED, "gdth", ha);
+ if (error) {
+ printk("GDT-EISA: Unable to allocate IRQ\n");
+ goto out_host_put;
+ }
+
+ shp->unchecked_isa_dma = 0;
+ shp->irq = ha->irq;
+ shp->dma_channel = 0xff;
+ hanum = gdth_ctr_count;
+ gdth_ctr_tab[gdth_ctr_count++] = shp;
+ gdth_ctr_vtab[gdth_ctr_vcount++] = shp;
+
+ NUMDATA(shp)->hanum = (ushort)hanum;
+ NUMDATA(shp)->busnum= 0;
+ TRACE2(("EISA detect Bus 0: hanum %d\n",
+ NUMDATA(shp)->hanum));
+
+ ha->pccb = CMDDATA(shp);
+ ha->ccb_phys = 0L;
+
+ error = -ENOMEM;
+
+ ha->pdev = NULL;
+ ha->pscratch = pci_alloc_consistent(ha->pdev, GDTH_SCRATCH,
+ &scratch_dma_handle);
+ if (!ha->pscratch)
+ goto out_free_irq;
+ ha->scratch_phys = scratch_dma_handle;
+
+ ha->pmsg = pci_alloc_consistent(ha->pdev, sizeof(gdth_msg_str),
+ &scratch_dma_handle);
+ if (!ha->pmsg)
+ goto out_free_pscratch;
+ ha->msg_phys = scratch_dma_handle;
+
+#ifdef INT_COAL
+ ha->coal_stat = pci_alloc_consistent(ha->pdev,
+ sizeof(gdth_coal_status) * MAXOFFSETS,
+ &scratch_dma_handle);
+ if (!ha->coal_stat)
+ goto out_free_pmsg;
+ ha->coal_stat_phys = scratch_dma_handle;
+#endif
+
+ ha->ccb_phys = pci_map_single(ha->pdev,ha->pccb,
+ sizeof(gdth_cmd_str), PCI_DMA_BIDIRECTIONAL);
+ if (!ha->ccb_phys)
+ goto out_free_coal_stat;
+
+ ha->scratch_busy = FALSE;
+ ha->req_first = NULL;
+ ha->tid_cnt = MAX_HDRIVES;
+ if (max_ids > 0 && max_ids < ha->tid_cnt)
+ ha->tid_cnt = max_ids;
+ for (i = 0; i < GDTH_MAXCMDS; ++i)
+ ha->cmd_tab[i].cmnd = UNUSED_CMND;
+ ha->scan_mode = rescan ? 0x10 : 0;
+
+ if (!gdth_search_drives(hanum)) {
+ printk("GDT-EISA: Error during device scan\n");
+ error = -ENODEV;
+ goto out_free_ccb_phys;
+ }
+
+ if (hdr_channel < 0 || hdr_channel > ha->bus_cnt)
+ hdr_channel = ha->bus_cnt;
+ ha->virt_bus = hdr_channel;
+
+ if (ha->cache_feat & ha->raw_feat & ha->screen_feat & GDT_64BIT)
+ shp->max_cmd_len = 16;
+
+ shp->max_id = ha->tid_cnt;
+ shp->max_lun = MAXLUN;
+ shp->max_channel = virt_ctr ? 0 : ha->bus_cnt;
+ if (virt_ctr) {
+ virt_ctr = 1;
+ /* register addit. SCSI channels as virtual controllers */
+ for (b = 1; b < ha->bus_cnt + 1; ++b) {
+ shp = scsi_register(shtp,sizeof(gdth_num_str));
+ shp->unchecked_isa_dma = 0;
+ shp->irq = ha->irq;
+ shp->dma_channel = 0xff;
+ gdth_ctr_vtab[gdth_ctr_vcount++] = shp;
+ NUMDATA(shp)->hanum = (ushort)hanum;
+ NUMDATA(shp)->busnum = b;
+ }
+ }
+
+ spin_lock_init(&ha->smp_lock);
+ gdth_enable_int(hanum);
+ return 0;
+
+ out_free_ccb_phys:
+ pci_unmap_single(ha->pdev,ha->ccb_phys, sizeof(gdth_cmd_str),
+ PCI_DMA_BIDIRECTIONAL);
+ out_free_coal_stat:
+#ifdef INT_COAL
+ pci_free_consistent(ha->pdev, sizeof(gdth_coal_status) * MAXOFFSETS,
+ ha->coal_stat, ha->coal_stat_phys);
+ out_free_pmsg:
+#endif
+ pci_free_consistent(ha->pdev, sizeof(gdth_msg_str),
+ ha->pmsg, ha->msg_phys);
+ out_free_pscratch:
+ pci_free_consistent(ha->pdev, GDTH_SCRATCH,
+ ha->pscratch, ha->scratch_phys);
+ out_free_irq:
+ free_irq(ha->irq, ha);
+ gdth_ctr_count--;
+ gdth_ctr_vcount--;
+ out_host_put:
+ scsi_unregister(shp);
+ return error;
+}
+#endif /* CONFIG_EISA */
#include "scsi_module.c"
#ifndef MODULE
--
1.5.3.1
next prev parent reply other threads:[~2007-09-30 19:54 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-30 19:44 [RFC 0/16] gdth combined patchset & call for testers Boaz Harrosh
2007-09-30 19:50 ` [PATCH 1/16] gdth: split out isa probing Boaz Harrosh
2007-10-02 17:17 ` Rolf Eike Beer
2007-10-03 16:00 ` Jeff Garzik
2007-09-30 19:50 ` Boaz Harrosh [this message]
2007-10-02 17:20 ` [PATCH 2/16] gdth: split out eisa probing Rolf Eike Beer
2007-10-03 17:27 ` Christoph Hellwig
2007-10-03 17:32 ` Rolf Eike Beer
2007-10-03 17:38 ` Christoph Hellwig
2007-10-03 17:59 ` Jeff Garzik
2007-10-03 18:05 ` Christoph Hellwig
2007-10-03 18:07 ` Jeff Garzik
2007-09-30 19:55 ` [PATCH 3/16] gdth: split out pci probing Boaz Harrosh
2007-09-30 19:57 ` [PATCH 4/16] gdth: Remove 2.4.x support, in-kernel changelog Boaz Harrosh
2007-09-30 19:58 ` [PATCH 5/16] gdth: kill gdth_{read,write}[bwl] wrappers Boaz Harrosh
2007-09-30 19:59 ` [PATCH 6/16] Reorder scsi_host_template intitializers Boaz Harrosh
2007-09-30 20:01 ` [PATCH 7/16] gdth: make some virt ctrlr code common Boaz Harrosh
2007-09-30 21:22 ` Christoph Hellwig
2007-09-30 20:03 ` [PATCH 8/16] gdth: Remove virt hosts Boaz Harrosh
2007-09-30 20:06 ` [PATCH 9/16] gdth: clean up host private data Boaz Harrosh
2007-09-30 21:23 ` Christoph Hellwig
2007-09-30 20:09 ` [PATCH 10/16] gdth: gdth_get_status() return pointer to host not its index Boaz Harrosh
2007-09-30 21:26 ` Christoph Hellwig
2007-10-02 11:04 ` Boaz Harrosh
2007-10-02 11:10 ` Boaz Harrosh
2007-09-30 20:10 ` [PATCH 11/16] gdth: switch to modern scsi host registration Boaz Harrosh
2007-09-30 20:12 ` [PATCH 12/16] gdth: Remove gdth_ctr_tab[] Boaz Harrosh
2007-09-30 20:13 ` [PATCH 13/16] gdth: Make one abuse of scsi_cmnd less obvious Boaz Harrosh
2007-09-30 21:28 ` Christoph Hellwig
2007-09-30 23:21 ` Matthew Wilcox
2007-10-01 13:56 ` Boaz Harrosh
2007-10-01 14:23 ` Jeff Garzik
2007-09-30 20:14 ` [PATCH 14/16] gdth: Setup proper per-command private data Boaz Harrosh
2007-09-30 20:16 ` [PATCH 15/16] gdth: Move members from SCp to gdth_cmndinfo, stage 2 Boaz Harrosh
2007-10-02 18:02 ` Rolf Eike Beer
2007-10-03 18:15 ` Christoph Hellwig
2007-09-30 20:17 ` [PATCH 16/16] gdth: !use_sg cleanup and use of scsi accessors Boaz Harrosh
2007-10-01 14:06 ` Boaz Harrosh
2007-10-01 14:19 ` [PATCH 16/16 ver2] " Boaz Harrosh
2007-09-30 21:00 ` [RFC 0/16] gdth combined patchset & call for testers Jeff Garzik
2007-09-30 21:07 ` Jeff Garzik
2007-09-30 21:36 ` Christoph Hellwig
2007-09-30 22:53 ` Jeff Garzik
2007-09-30 21:27 ` Jeff Garzik
2007-10-01 14:29 ` Boaz Harrosh
2007-09-30 21:33 ` Christoph Hellwig
2007-09-30 22:53 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46FFFE21.4030902@panasas.com \
--to=bharrosh@panasas.com \
--cc=James.Bottomley@SteelEye.com \
--cc=achim_leubner@adaptec.com \
--cc=hch@infradead.org \
--cc=jeff@garzik.org \
--cc=linux-scsi@vger.kernel.org \
--cc=willy@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.