All of lore.kernel.org
 help / color / mirror / Atom feed
From: Boaz Harrosh <bharrosh@panasas.com>
To: Christoph Hellwig <hch@infradead.org>,
	Jeff Garzik <jeff@garzik.org>,
	James Bottomley <James.Bottomley@SteelEye.com>,
	Matthew Wilcox <willy@linux.intel.com>,
	achim_leubner@adaptec.com
Cc: linux-scsi <linux-scsi@vger.kernel.org>
Subject: [PATCH 3/16] gdth: split out pci probing
Date: Sun, 30 Sep 2007 21:55:30 +0200	[thread overview]
Message-ID: <46FFFF32.5080306@panasas.com> (raw)
In-Reply-To: <46FFFC8C.6080804@panasas.com>


Split out per-device pci probing and put it under proper CONFIG_PCI.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/scsi/gdth.c |  287 +++++++++++++++++++++++++++-----------------------
 1 files changed, 155 insertions(+), 132 deletions(-)

diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index 5240acd..882479b 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -482,6 +482,9 @@ static int gdth_isa_probe_one(struct scsi_host_template *, ulong32);
 #ifdef CONFIG_EISA
 static int gdth_eisa_probe_one(struct scsi_host_template *, ushort);
 #endif
+#ifdef CONFIG_PCI
+static int gdth_pci_probe_one(struct scsi_host_template *, gdth_pci_str *, int);
+#endif
 
 #ifdef DEBUG_GDTH
 static unchar   DebugState = DEBUG_GDTH;
@@ -4290,12 +4293,10 @@ static int __init gdth_detect(struct scsi_host_template *shtp)
 static int __init gdth_detect(Scsi_Host_Template *shtp)
 #endif
 {
-    struct Scsi_Host *shp;
     gdth_pci_str pcistr[MAXHA];
-    gdth_ha_str *ha;
     ulong32 isa_bios;
     ushort eisa_slot;
-    int i,hanum,cnt,ctr,err;
+    int cnt,ctr;
     unchar b;
     
  
@@ -4347,143 +4348,17 @@ static int __init gdth_detect(Scsi_Host_Template *shtp)
     }
 #endif
 
+#ifdef CONFIG_PCI
     /* scanning for PCI controllers */
     cnt = gdth_search_pci(pcistr);
     printk("GDT-HA: Found %d PCI Storage RAID Controllers\n",cnt);
     gdth_sort_pci(pcistr,cnt);
     for (ctr = 0; ctr < cnt; ++ctr) {
-        dma_addr_t scratch_dma_handle;
-        scratch_dma_handle = 0;
-
         if (gdth_ctr_count >= MAXHA)
             break;
-        shp = scsi_register(shtp,sizeof(gdth_ext_str));
-        if (shp == NULL)
-            continue;  
-
-        ha = HADATA(shp);
-        if (!gdth_init_pci(&pcistr[ctr],ha)) {
-            scsi_unregister(shp);
-            continue;
-        }
-        /* controller found and initialized */
-        printk("Configuring GDT-PCI HA at %d/%d IRQ %u\n",
-               pcistr[ctr].pdev->bus->number,
-	       PCI_SLOT(pcistr[ctr].pdev->devfn), ha->irq);
-
-        if (request_irq(ha->irq, gdth_interrupt,
-                        IRQF_DISABLED|IRQF_SHARED, "gdth", ha))
-        {
-            printk("GDT-PCI: Unable to allocate IRQ\n");
-            scsi_unregister(shp);
-            continue;
-        }
-        shp->unchecked_isa_dma = 0;
-        shp->irq = ha->irq;
-        shp->dma_channel = 0xff;
-        hanum = gdth_ctr_count;
-        gdth_ctr_tab[gdth_ctr_count++] = shp;
-        gdth_ctr_vtab[gdth_ctr_vcount++] = shp;
-
-        NUMDATA(shp)->hanum = (ushort)hanum;
-        NUMDATA(shp)->busnum= 0;
-
-        ha->pccb = CMDDATA(shp);
-        ha->ccb_phys = 0L;
-
-        ha->pscratch = pci_alloc_consistent(ha->pdev, GDTH_SCRATCH, 
-                                            &scratch_dma_handle);
-        ha->scratch_phys = scratch_dma_handle;
-        ha->pmsg = pci_alloc_consistent(ha->pdev, sizeof(gdth_msg_str), 
-                                        &scratch_dma_handle);
-        ha->msg_phys = scratch_dma_handle;
-#ifdef INT_COAL
-        ha->coal_stat = (gdth_coal_status *)
-            pci_alloc_consistent(ha->pdev, sizeof(gdth_coal_status) *
-                                 MAXOFFSETS, &scratch_dma_handle);
-        ha->coal_stat_phys = scratch_dma_handle;
-#endif
-        ha->scratch_busy = FALSE;
-        ha->req_first = NULL;
-        ha->tid_cnt = pcistr[ctr].pdev->device >= 0x200 ? MAXID : MAX_HDRIVES;
-        if (max_ids > 0 && max_ids < ha->tid_cnt)
-            ha->tid_cnt = max_ids;
-        for (i=0; i<GDTH_MAXCMDS; ++i)
-            ha->cmd_tab[i].cmnd = UNUSED_CMND;
-        ha->scan_mode = rescan ? 0x10 : 0;
-
-        err = FALSE;
-        if (ha->pscratch == NULL || ha->pmsg == NULL || 
-            !gdth_search_drives(hanum)) {
-            err = TRUE;
-        } else {
-            if (hdr_channel < 0 || hdr_channel > ha->bus_cnt)
-                hdr_channel = ha->bus_cnt;
-            ha->virt_bus = hdr_channel;
-
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
-            scsi_set_pci_device(shp, pcistr[ctr].pdev);
-#endif
-            if (!(ha->cache_feat & ha->raw_feat & ha->screen_feat &GDT_64BIT)||
-                /* 64-bit DMA only supported from FW >= x.43 */
-                (!ha->dma64_support)) {
-                if (pci_set_dma_mask(pcistr[ctr].pdev, DMA_32BIT_MASK)) {
-                    printk(KERN_WARNING "GDT-PCI %d: Unable to set 32-bit DMA\n", hanum);
-                    err = TRUE;
-                }
-            } else {
-                shp->max_cmd_len = 16;
-                if (!pci_set_dma_mask(pcistr[ctr].pdev, DMA_64BIT_MASK)) {
-                    printk("GDT-PCI %d: 64-bit DMA enabled\n", hanum);
-                } else if (pci_set_dma_mask(pcistr[ctr].pdev, DMA_32BIT_MASK)) {
-                    printk(KERN_WARNING "GDT-PCI %d: Unable to set 64/32-bit DMA\n", hanum);
-                    err = TRUE;
-                }
-            }
-        }
-
-        if (err) {
-            printk("GDT-PCI %d: Error during device scan\n", hanum);
-            --gdth_ctr_count;
-            --gdth_ctr_vcount;
-#ifdef INT_COAL
-            if (ha->coal_stat)
-                pci_free_consistent(ha->pdev, sizeof(gdth_coal_status) *
-                                    MAXOFFSETS, ha->coal_stat,
-                                    ha->coal_stat_phys);
-#endif
-            if (ha->pscratch)
-                pci_free_consistent(ha->pdev, GDTH_SCRATCH, 
-                                    ha->pscratch, ha->scratch_phys);
-            if (ha->pmsg)
-                pci_free_consistent(ha->pdev, sizeof(gdth_msg_str), 
-                                    ha->pmsg, ha->msg_phys);
-            free_irq(ha->irq,ha);
-            scsi_unregister(shp);
-            continue;
-        }
-
-        shp->max_id      = ha->tid_cnt;
-        shp->max_lun     = MAXLUN;
-        shp->max_channel = virt_ctr ? 0 : ha->bus_cnt;
-        if (virt_ctr) {
-            virt_ctr = 1;
-            /* register addit. SCSI channels as virtual controllers */
-            for (b = 1; b < ha->bus_cnt + 1; ++b) {
-                shp = scsi_register(shtp,sizeof(gdth_num_str));
-                shp->unchecked_isa_dma = 0;
-                shp->irq = ha->irq;
-                shp->dma_channel = 0xff;
-                gdth_ctr_vtab[gdth_ctr_vcount++] = shp;
-                NUMDATA(shp)->hanum = (ushort)hanum;
-                NUMDATA(shp)->busnum = b;
-            }
-        }  
-
-        spin_lock_init(&ha->smp_lock);
-        gdth_enable_int(hanum);
+        gdth_pci_probe_one(shtp, pcistr, ctr);
     }
+#endif
     
     TRACE2(("gdth_detect() %d controller detected\n",gdth_ctr_count));
     if (gdth_ctr_count > 0) {
@@ -5725,6 +5600,154 @@ static int gdth_eisa_probe_one(struct scsi_host_template *shtp,
 }
 #endif /* CONFIG_EISA */
 
+#ifdef CONFIG_PCI
+static int gdth_pci_probe_one(struct scsi_host_template *shtp,
+		gdth_pci_str *pcistr, int ctr)
+{
+	struct Scsi_Host *shp;
+	gdth_ha_str *ha;
+	dma_addr_t scratch_dma_handle = 0;
+	int error, hanum, i;
+	u8 b;
+
+	shp = scsi_register(shtp,sizeof(gdth_ext_str));
+	if (!shp)
+		return -ENOMEM;
+	ha = HADATA(shp);
+
+	error = -ENODEV;
+	if (!gdth_init_pci(&pcistr[ctr],ha))
+		goto out_host_put;
+
+	/* controller found and initialized */
+	printk("Configuring GDT-PCI HA at %d/%d IRQ %u\n",
+		pcistr[ctr].pdev->bus->number,
+		PCI_SLOT(pcistr[ctr].pdev->devfn),
+		ha->irq);
+
+	error = request_irq(ha->irq, gdth_interrupt,
+				IRQF_DISABLED|IRQF_SHARED, "gdth", ha);
+	if (error) {
+		printk("GDT-PCI: Unable to allocate IRQ\n");
+		goto out_host_put;
+	}
+
+	shp->unchecked_isa_dma = 0;
+	shp->irq = ha->irq;
+	shp->dma_channel = 0xff;
+	hanum = gdth_ctr_count;
+	gdth_ctr_tab[gdth_ctr_count++] = shp;
+	gdth_ctr_vtab[gdth_ctr_vcount++] = shp;
+
+	NUMDATA(shp)->hanum = (ushort)hanum;
+	NUMDATA(shp)->busnum= 0;
+
+	ha->pccb = CMDDATA(shp);
+	ha->ccb_phys = 0L;
+
+	error = -ENOMEM;
+
+	ha->pscratch = pci_alloc_consistent(ha->pdev, GDTH_SCRATCH,
+						&scratch_dma_handle);
+	if (!ha->pscratch)
+		goto out_free_irq;
+	ha->scratch_phys = scratch_dma_handle;
+
+	ha->pmsg = pci_alloc_consistent(ha->pdev, sizeof(gdth_msg_str),
+					&scratch_dma_handle);
+	if (!ha->pmsg)
+		goto out_free_pscratch;
+	ha->msg_phys = scratch_dma_handle;
+
+#ifdef INT_COAL
+	ha->coal_stat = pci_alloc_consistent(ha->pdev,
+			sizeof(gdth_coal_status) * MAXOFFSETS,
+			&scratch_dma_handle);
+	if (!ha->coal_stat)
+		goto out_free_pmsg;
+	ha->coal_stat_phys = scratch_dma_handle;
+#endif
+
+	ha->scratch_busy = FALSE;
+	ha->req_first = NULL;
+	ha->tid_cnt = pcistr[ctr].pdev->device >= 0x200 ? MAXID : MAX_HDRIVES;
+	if (max_ids > 0 && max_ids < ha->tid_cnt)
+		ha->tid_cnt = max_ids;
+	for (i = 0; i < GDTH_MAXCMDS; ++i)
+		ha->cmd_tab[i].cmnd = UNUSED_CMND;
+	ha->scan_mode = rescan ? 0x10 : 0;
+
+	error = -ENODEV;
+	if (!gdth_search_drives(hanum)) {
+		printk("GDT-PCI %d: Error during device scan\n", hanum);
+		goto out_free_coal_stat;
+	}
+
+	if (hdr_channel < 0 || hdr_channel > ha->bus_cnt)
+		hdr_channel = ha->bus_cnt;
+	ha->virt_bus = hdr_channel;
+
+	/* 64-bit DMA only supported from FW >= x.43 */
+	if (!(ha->cache_feat & ha->raw_feat & ha->screen_feat & GDT_64BIT) ||
+	    !ha->dma64_support) {
+		if (pci_set_dma_mask(pcistr[ctr].pdev, DMA_32BIT_MASK)) {
+			printk(KERN_WARNING "GDT-PCI %d: "
+				"Unable to set 32-bit DMA\n", hanum);
+				goto out_free_coal_stat;
+		}
+	} else {
+		shp->max_cmd_len = 16;
+		if (!pci_set_dma_mask(pcistr[ctr].pdev, DMA_64BIT_MASK)) {
+			printk("GDT-PCI %d: 64-bit DMA enabled\n", hanum);
+		} else if (pci_set_dma_mask(pcistr[ctr].pdev, DMA_32BIT_MASK)) {
+			printk(KERN_WARNING "GDT-PCI %d: "
+				"Unable to set 64/32-bit DMA\n", hanum);
+			goto out_free_coal_stat;
+		}
+	}
+
+	shp->max_id      = ha->tid_cnt;
+	shp->max_lun     = MAXLUN;
+	shp->max_channel = virt_ctr ? 0 : ha->bus_cnt;
+	if (virt_ctr) {
+		virt_ctr = 1;
+		/* register addit. SCSI channels as virtual controllers */
+		for (b = 1; b < ha->bus_cnt + 1; ++b) {
+			shp = scsi_register(shtp,sizeof(gdth_num_str));
+			shp->unchecked_isa_dma = 0;
+			shp->irq = ha->irq;
+			shp->dma_channel = 0xff;
+			gdth_ctr_vtab[gdth_ctr_vcount++] = shp;
+			NUMDATA(shp)->hanum = (ushort)hanum;
+			NUMDATA(shp)->busnum = b;
+		}
+	}
+
+	spin_lock_init(&ha->smp_lock);
+	gdth_enable_int(hanum);
+	return 0;
+
+ out_free_coal_stat:
+#ifdef INT_COAL
+	pci_free_consistent(ha->pdev, sizeof(gdth_coal_status) * MAXOFFSETS,
+				ha->coal_stat, ha->coal_stat_phys);
+ out_free_pmsg:
+#endif
+	pci_free_consistent(ha->pdev, sizeof(gdth_msg_str),
+				ha->pmsg, ha->msg_phys);
+ out_free_pscratch:
+	pci_free_consistent(ha->pdev, GDTH_SCRATCH,
+				ha->pscratch, ha->scratch_phys);
+ out_free_irq:
+	free_irq(ha->irq, ha);
+	gdth_ctr_count--;
+	gdth_ctr_vcount--;
+ out_host_put:
+	scsi_unregister(shp);
+	return error;
+}
+#endif /* CONFIG_PCI */
+
 #include "scsi_module.c"
 #ifndef MODULE
 __setup("gdth=", option_setup);

  parent reply	other threads:[~2007-09-30 19:55 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-09-30 19:44 [RFC 0/16] gdth combined patchset & call for testers Boaz Harrosh
2007-09-30 19:50 ` [PATCH 1/16] gdth: split out isa probing Boaz Harrosh
2007-10-02 17:17   ` Rolf Eike Beer
2007-10-03 16:00     ` Jeff Garzik
2007-09-30 19:50 ` [PATCH 2/16] gdth: split out eisa probing Boaz Harrosh
2007-10-02 17:20   ` Rolf Eike Beer
2007-10-03 17:27     ` Christoph Hellwig
2007-10-03 17:32       ` Rolf Eike Beer
2007-10-03 17:38         ` Christoph Hellwig
2007-10-03 17:59           ` Jeff Garzik
2007-10-03 18:05             ` Christoph Hellwig
2007-10-03 18:07               ` Jeff Garzik
2007-09-30 19:55 ` Boaz Harrosh [this message]
2007-09-30 19:57 ` [PATCH 4/16] gdth: Remove 2.4.x support, in-kernel changelog Boaz Harrosh
2007-09-30 19:58 ` [PATCH 5/16] gdth: kill gdth_{read,write}[bwl] wrappers Boaz Harrosh
2007-09-30 19:59 ` [PATCH 6/16] Reorder scsi_host_template intitializers Boaz Harrosh
2007-09-30 20:01 ` [PATCH 7/16] gdth: make some virt ctrlr code common Boaz Harrosh
2007-09-30 21:22   ` Christoph Hellwig
2007-09-30 20:03 ` [PATCH 8/16] gdth: Remove virt hosts Boaz Harrosh
2007-09-30 20:06 ` [PATCH 9/16] gdth: clean up host private data Boaz Harrosh
2007-09-30 21:23   ` Christoph Hellwig
2007-09-30 20:09 ` [PATCH 10/16] gdth: gdth_get_status() return pointer to host not its index Boaz Harrosh
2007-09-30 21:26   ` Christoph Hellwig
2007-10-02 11:04     ` Boaz Harrosh
2007-10-02 11:10       ` Boaz Harrosh
2007-09-30 20:10 ` [PATCH 11/16] gdth: switch to modern scsi host registration Boaz Harrosh
2007-09-30 20:12 ` [PATCH 12/16] gdth: Remove gdth_ctr_tab[] Boaz Harrosh
2007-09-30 20:13 ` [PATCH 13/16] gdth: Make one abuse of scsi_cmnd less obvious Boaz Harrosh
2007-09-30 21:28   ` Christoph Hellwig
2007-09-30 23:21     ` Matthew Wilcox
2007-10-01 13:56       ` Boaz Harrosh
2007-10-01 14:23         ` Jeff Garzik
2007-09-30 20:14 ` [PATCH 14/16] gdth: Setup proper per-command private data Boaz Harrosh
2007-09-30 20:16 ` [PATCH 15/16] gdth: Move members from SCp to gdth_cmndinfo, stage 2 Boaz Harrosh
2007-10-02 18:02   ` Rolf Eike Beer
2007-10-03 18:15     ` Christoph Hellwig
2007-09-30 20:17 ` [PATCH 16/16] gdth: !use_sg cleanup and use of scsi accessors Boaz Harrosh
2007-10-01 14:06   ` Boaz Harrosh
2007-10-01 14:19   ` [PATCH 16/16 ver2] " Boaz Harrosh
2007-09-30 21:00 ` [RFC 0/16] gdth combined patchset & call for testers Jeff Garzik
2007-09-30 21:07 ` Jeff Garzik
2007-09-30 21:36   ` Christoph Hellwig
2007-09-30 22:53     ` Jeff Garzik
2007-09-30 21:27 ` Jeff Garzik
2007-10-01 14:29   ` Boaz Harrosh
2007-09-30 21:33 ` Christoph Hellwig
2007-09-30 22:53 ` Jeff Garzik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=46FFFF32.5080306@panasas.com \
    --to=bharrosh@panasas.com \
    --cc=James.Bottomley@SteelEye.com \
    --cc=achim_leubner@adaptec.com \
    --cc=hch@infradead.org \
    --cc=jeff@garzik.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=willy@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.