Re: FreeBSD image hangs during boot

[Laurent Vivier <Laurent.Vivier-6ktuUTfB/bM@public.gmane.org>]

[-- Attachment #1.1: Type: text/plain, Size: 1603 bytes --]

Avi Kivity wrote:
> Aurelien Jarno wrote:
>>
>> It's actually described page 200 of the specifications (page 216 in
>> ACPIspec30.pdf):
>>
>>   Note: This descriptor is meant for describing interrupts that are
>> connected to PIC-compatible
>>   interrupt controllers, which can only be programmed for
>> Active-High-Edge-Triggered or Active-
>>   Low-Level-Triggered interrupts. Any other combination is illegal.
>> The Extended Interrupt
>>   Descriptor can be used to describe other combinations.
>>
>>
>>  
>>> Avi, if you think this anlysis is correct I can provide the patch
>>> changing
>>> "Level" to "Edge"...
>>>
>>>     
>>
>> It looks like the solution is either to describe the IRQ with an
>> "Extended Interrupt Descriptor" or to change this value to one of the
>> two allowed values. In the later case we have to make sure it is
>> consistent with the way the PIC works.
>>
>>   
> 
> The attached patch attempts to override the pci irqs (now limited to 5,
> 9, 10, and 11) to be active high level triggered.  Linux boots and
> parses this correctly.  Freebsd still fails.

FreeBSD will fail while ACPI will have Active-High and Level-triggered, except
if you define, as Aurélien said, an "Extended Interrupt Descriptor" in ACPI table.

BTW, I'm not able to boot Debian Sarge (2.6.8-11-amd64-generic) with your patch
(as before).

Moreover, I don't understand what this patch resolves...

Laurent
-- 
---------------- Laurent.Vivier-6ktuUTfB/bM@public.gmane.org  -----------------
"Given enough eyeballs, all bugs are shallow" E. S. Raymond


[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

[-- Attachment #2: Type: text/plain, Size: 314 bytes --]

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/

[-- Attachment #3: Type: text/plain, Size: 186 bytes --]

_______________________________________________
kvm-devel mailing list
kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/kvm-devel