From: Tony Battersby <tonyb@cybernetics.com>
To: Willy Tarreau <w@1wt.eu>
Cc: matthew@wil.cx, linux-scsi@vger.kernel.org,
James.Bottomley@HansenPartnership.com, protasnb@gmail.com,
bugme-daemon@bugzilla.kernel.org
Subject: Re: [Bug 3680] sym53c8xx_2 SMP deadlock on driver load
Date: Wed, 17 Oct 2007 12:22:11 -0400 [thread overview]
Message-ID: <471636B3.10907@cybernetics.com> (raw)
In-Reply-To: <20071017155256.GA2820@1wt.eu>
This patch fixes two problems with sym53c8xx_2.o in 2.4.x kernels:
1) A system hang when loading sym53c8xx_2.o on a SMP system with two
dual-channel LSI HBAs (http://bugzilla.kernel.org/show_bug.cgi?id=3680)
2) A function improperly marked __init.
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
---
--- linux-2.4.35/drivers/scsi/sym53c8xx_2/sym_glue.c.orig 2007-10-17 12:07:37.000000000 -0400
+++ linux-2.4.35/drivers/scsi/sym53c8xx_2/sym_glue.c 2007-10-17 12:08:32.000000000 -0400
@@ -224,15 +224,26 @@ static u_long __init pci_map_mem(u_long
{
u_long page_base = ((u_long) base) & PAGE_MASK;
u_long page_offs = ((u_long) base) - page_base;
- u_long page_remapped = (u_long) ioremap(page_base, page_offs+size);
+ u_long page_remapped;
+
+ spin_unlock_irq(&io_request_lock);
+ page_remapped = (u_long) ioremap(page_base, page_offs+size);
+ spin_lock_irq(&io_request_lock);
return page_remapped? (page_remapped + page_offs) : 0UL;
}
-static void __init pci_unmap_mem(u_long vaddr, u_long size)
-{
- if (vaddr)
+static void pci_unmap_mem(u_long vaddr,
+ u_long size,
+ int holding_io_request_lock)
+{
+ if (vaddr) {
+ if (holding_io_request_lock)
+ spin_unlock_irq(&io_request_lock);
iounmap((void *) (vaddr & PAGE_MASK));
+ if (holding_io_request_lock)
+ spin_lock_irq(&io_request_lock);
+ }
}
#endif
@@ -1840,7 +1851,7 @@ static int sym53c8xx_proc_info(char *buf
/*
* Free controller resources.
*/
-static void sym_free_resources(hcb_p np)
+static void sym_free_resources(hcb_p np, int holding_io_request_lock)
{
/*
* Free O/S specific resources.
@@ -1851,9 +1862,13 @@ static void sym_free_resources(hcb_p np)
release_region(np->s.io_port, np->s.io_ws);
#ifndef SYM_OPT_NO_BUS_MEMORY_MAPPING
if (np->s.mmio_va)
- pci_unmap_mem(np->s.mmio_va, np->s.io_ws);
+ pci_unmap_mem(np->s.mmio_va,
+ np->s.io_ws,
+ holding_io_request_lock);
if (np->s.ram_va)
- pci_unmap_mem(np->s.ram_va, np->ram_ws);
+ pci_unmap_mem(np->s.ram_va,
+ np->ram_ws,
+ holding_io_request_lock);
#endif
/*
* Free O/S independant resources.
@@ -2155,7 +2170,7 @@ attach_failed:
if (!instance) return -1;
printf_info("%s: giving up ...\n", sym_name(np));
if (np)
- sym_free_resources(np);
+ sym_free_resources(np, 1);
scsi_unregister(instance);
return -1;
@@ -2197,7 +2212,7 @@ static void __init sym_get_nvram(sym_dev
#ifdef SYM_CONF_IOMAPPED
release_region(devp->s.io_port, 128);
#else
- pci_unmap_mem((u_long) devp->s.mmio_va, 128ul);
+ pci_unmap_mem((u_long) devp->s.mmio_va, 128ul, 1);
#endif
}
#endif /* SYM_CONF_NVRAM_SUPPORT */
@@ -2551,7 +2566,7 @@ sym53c8xx_pci_init(Scsi_Host_Template *t
ram_ptr = pci_map_mem(base_2_c, ram_size);
if (ram_ptr) {
ram_val = readl_raw(ram_ptr + ram_size - 16);
- pci_unmap_mem(ram_ptr, ram_size);
+ pci_unmap_mem(ram_ptr, ram_size, 1);
if (ram_val == 0x52414944) {
printf_info("%s: not initializing, "
"driven by RAID controller.\n",
@@ -2980,7 +2995,7 @@ static int sym_detach(hcb_p np)
/*
* Free host resources
*/
- sym_free_resources(np);
+ sym_free_resources(np, 0);
return 1;
}
next prev parent reply other threads:[~2007-10-17 16:22 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20071017013045.A19ED108036@picon.linux-foundation.org>
2007-10-17 14:53 ` [Bug 3680] sym53c8xx_2 SMP deadlock on driver load Tony Battersby
2007-10-17 15:20 ` Willy Tarreau
2007-10-17 15:44 ` Tony Battersby
2007-10-17 15:52 ` Willy Tarreau
2007-10-17 16:22 ` Tony Battersby [this message]
2007-10-17 16:27 ` Matthew Wilcox
2007-10-17 18:46 ` Willy Tarreau
2007-10-17 20:12 ` Matthew Wilcox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=471636B3.10907@cybernetics.com \
--to=tonyb@cybernetics.com \
--cc=James.Bottomley@HansenPartnership.com \
--cc=bugme-daemon@bugzilla.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=matthew@wil.cx \
--cc=protasnb@gmail.com \
--cc=w@1wt.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.