From: Peter <pc2a@pi4cc.nl>
To: Bernard Pidoux <pidoux@ccr.jussieu.fr>
Cc: linux-hams@vger.kernel.org
Subject: Re: TNC3
Date: Sat, 20 Oct 2007 14:41:39 +0000 [thread overview]
Message-ID: <471A13A3.8090206@pi4cc.nl> (raw)
In-Reply-To: <4719CDDB.3030604@ccr.jussieu.fr>
Hi all
The trick is/was to put the TNC in KISS mode.
The TNC3S has serveral programmas that can put into the memory. With the
right dipswitch on the back you can startup a programma In my case
rskiss. This put the TNC in KISS mode on the rs232 port at boot-up.
Thanks for the emails!
Peter
Bernard Pidoux schreef:
> Hi Peter,
>
>
> Your info is absolutely right.
>
> However, you should put your TNC into kiss mode manually i.e. using a
> terminal program to instruct it to change into kiss mode (see the
> TNC3S manual).
>
> Communicating with the terminal program through serial port with TNC
> is only possible if AX25 driver is NOT loaded.
>
> Then the order of operation is :
>
> Enter into your terminal program.
> Choose the appropriate port and speed.
> Reboot your TNC3S in order to make it detect your serial port speed
> when pressing ENTER key (autobaud routine when TNC powerer up).
>
> Type the commands :
>
> INTFACE TERM and press return
>
> At this point you can monitor incoming traffic on both ports.
>
>
> INTFACE KISS and press return
> RESET and press return
>
>
> Now your TNC is in kiss mode and you cannot communicate any more via
> the terminal program. You will only see garbage on the screen.
>
> You can now load the AX25 mkiss driver and continue with AX25
> applications.
>
>
> Note ; since I did not perform these commands for years (I left my
> TNC2 in KISS mode forever) I may have forgotten the syntax) I do not
> remember the name of Linux simple serial communication program...
>
> 73 de Bernard, f6bvp
>
>
> Peter wrote:
>> Hi
>>
>> I'am looking for support to get a TNC3S with 2 modem working
>> With standard kissattach I got modem 1 on the air.
>>
>> In the ax25 how-to I found:
>> If you have a dual port tnc and it is connected to
>> your /dev/ttyS0 serial device at 9600 bps,
>> the command:
>> /usr/sbin/mkiss -s 9600 /dev/ttyS0 /dev/ptyp0 /dev/ptyp1
>> /usr/sbin/kissattach /dev/ttyp0 port1
>> /usr/sbin/kissattach /dev/ttyp1 port2
>>
>> But none of the modem do work
>> Who has a TNC3S running ?
>>
>> Peter
>> PC2A
>> -
>> To unsubscribe from this list: send the line "unsubscribe linux-hams" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-hams" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
>
next prev parent reply other threads:[~2007-10-20 14:41 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-19 18:13 TNC3 Peter
2007-10-20 9:43 ` TNC3 Bernard Pidoux
2007-10-20 9:42 ` TNC3 Erik Jakobsen
2007-10-20 14:41 ` Peter [this message]
2007-10-22 19:10 ` TNC3 Bill Vodall WA7NWP
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=471A13A3.8090206@pi4cc.nl \
--to=pc2a@pi4cc.nl \
--cc=linux-hams@vger.kernel.org \
--cc=pidoux@ccr.jussieu.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.