* Re: marvell 88SX6081 and linux 2.6.23.1
2007-10-26 3:23 ` Tejun Heo
@ 2007-10-26 4:42 ` jeffunit
2007-10-26 5:03 ` Tejun Heo
0 siblings, 1 reply; 7+ messages in thread
From: jeffunit @ 2007-10-26 4:42 UTC (permalink / raw)
To: Tejun Heo, jeffunit; +Cc: linux-ide
At 08:23 PM 10/25/2007, Tejun Heo wrote:
>jeffunit wrote:
> >
> >> jeffunit wrote:
> >> > I built a kernel, 2.6.23.1 today.
> >> > My motherboard is an intel stl2, dual pentium 933 motherboard, with
> >> > about 3gb of ram.
> >> > I also have a promise tx100 controller with an ata hard drive for the
> >> > os, and a sony dvdrw drive.
> >> > There is an intel gigabit ethernet card, and an ati pci video card.
> >> >
> >> > I have an 8 port supermicro sata II controller with the marvell
> >> > 888SX6081 chipset.
> >> > I have four 500gb sata II maxtor hard drives attached to it.
> >> >
> >> > All except /dev/sda1 seem to work fine.
> >> > When I copy/modify files on /dev/sda1, I get the following dmesg
> >> errors:
> >> >
> >> > The machine is designed to be a fileserver, but I am happy to help
> >> debug
> >> > this issue to the best
> >> > of my abilities.
> >> >
> >> > When I boot windows xp, xp sees all 4 of the sata drives, and they work
> >> > without any problems.
> >> >
> >> > Please advise,
> >> > jeff
> >> >
> >> > ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> >> > ata1.00: edma_err 0x00000084, EDMA self-disable
> >> > ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data
> >> 4096 in
> >> > res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media
> >> error)
> >>
> >> Media errors which is usually localized to certain area of disk.
> >> Replace disk.
> >
> > The disk works fine under windows xp. I never got any errors with it and
> > xp.
>
>And you were accessing the same region of the drive?
>
> > I can swap the first and second hard drive.
> > With the old kernel, the errors stayed with whatever drive was hooked up to
> > the first port of the controller. I will report the results.
>
>Hmmm... Yes please. Also, please report the result of "smartctl -a
>/dev/sda".
Pardon the long post
I swapped /dev/sda and /dev/sdb cables at the controller.
Here is what smartctl -a said afterward:
sda:
smartctl version 5.37 [i586-mandriva-linux-gnu] Copyright (C) 2002-6
Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: MAXTOR STM3500630AS
Serial Number: 9QG1Y3R3
Firmware Version: 3.AAE
User Capacity: 500,107,862,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Oct 25 21:02:45 2007 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no
self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 163) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH
TYPE UPDATED WHEN_FAILED RAW_VALUE
1
Raw_Read_Error_Rate 0x000f 119 094 006 Pre-fail Always
- 218977613
3
Spin_Up_Time 0x0003 093 093 000 Pre-fail Always
- 0
4
Start_Stop_Count 0x0032 100 100 020 Old_age Always
- 28
5
Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always
- 23
7
Seek_Error_Rate 0x000f 066 060 030 Pre-fail Always
- 5082213
9
Power_On_Hours 0x0032 100 100 000 Old_age Always
- 74
10
Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always
- 0
12
Power_Cycle_Count 0x0032 100 100 020 Old_age Always
- 39
187
Unknown_Attribute 0x0032 100 100 000 Old_age Always
- 0
189
Unknown_Attribute 0x003a 100 100 000 Old_age Always
- 0
190
Temperature_Celsius 0x0022 067 056 045 Old_age Always
- 555679777
194
Temperature_Celsius 0x0022 033 044 000 Old_age Always
- 33 (Lifetime Min/Max 0/21)
195
Hardware_ECC_Recovered 0x001a 087 056 000 Old_age Always
- 76318315
197
Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 1
198
Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline
- 1
199
UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
200
Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline
- 0
202
TA_Increase_Count 0x0032 100 253 000 Old_age Always
- 0
SMART Error Log Version: 1
ATA Error Count: 2
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2 occurred at disk power-on lifetime: 11 hours (0 days + 11 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 2b 7c 48 40 Error: IDNF at LBA = 0x00487c2b = 4750379
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 00 3f 7a 48 40 00 02:04:42.054 READ VERIFY SECTOR(S) EXT
42 00 00 3f 78 48 40 00 02:04:42.049 READ VERIFY SECTOR(S) EXT
42 00 00 3f 78 48 40 00 02:04:42.043 READ VERIFY SECTOR(S) EXT
42 00 00 3f 76 48 40 00 02:04:42.036 READ VERIFY SECTOR(S) EXT
42 00 00 3f 74 48 40 00 02:04:47.251 READ VERIFY SECTOR(S) EXT
Error 1 occurred at disk power-on lifetime: 11 hours (0 days + 11 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 57 79 48 40 Error: IDNF at LBA = 0x00487957 = 4749655
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 00 3f 78 48 40 00 02:04:42.054 READ VERIFY SECTOR(S) EXT
42 00 00 3f 76 48 40 00 02:04:42.049 READ VERIFY SECTOR(S) EXT
42 00 00 3f 74 48 40 00 02:04:42.043 READ VERIFY SECTOR(S) EXT
42 00 00 3f 72 48 40 00 02:04:42.036 READ VERIFY SECTOR(S) EXT
42 00 00 3f 70 48 40 00 02:04:42.031 READ VERIFY SECTOR(S) EXT
SMART Self-test log structure revision number 1
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
sdb:
smartctl version 5.37 [i586-mandriva-linux-gnu] Copyright (C) 2002-6
Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: MAXTOR STM3500630AS
Serial Number: 9QG1RWTH
Firmware Version: 3.AAE
User Capacity: 500,107,862,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Oct 25 21:02:50 2007 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no
self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 163) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH
TYPE UPDATED WHEN_FAILED RAW_VALUE
1
Raw_Read_Error_Rate 0x000f 114 088 006 Pre-fail Always
- 63140281
3
Spin_Up_Time 0x0003 093 093 000 Pre-fail Always
- 0
4
Start_Stop_Count 0x0032 100 100 020 Old_age Always
- 27
5
Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always
- 12
7
Seek_Error_Rate 0x000f 063 060 030 Pre-fail Always
- 2020356
9
Power_On_Hours 0x0032 100 100 000 Old_age Always
- 73
10
Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always
- 0
12
Power_Cycle_Count 0x0032 100 100 020 Old_age Always
- 39
187
Unknown_Attribute 0x0032 001 001 000 Old_age Always
- 1195
189
Unknown_Attribute 0x003a 100 100 000 Old_age Always
- 0
190
Temperature_Celsius 0x0022 067 055 045 Old_age Always
- 572522529
194
Temperature_Celsius 0x0022 033 045 000 Old_age Always
- 33 (Lifetime Min/Max 0/22)
195
Hardware_ECC_Recovered 0x001a 097 050 000 Old_age Always
- 140186474
197
Current_Pending_Sector 0x0012 069 069 000 Old_age Always
- 650
198
Offline_Uncorrectable 0x0010 069 069 000 Old_age Offline
- 650
199
UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
200
Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline
- 0
202
TA_Increase_Count 0x0032 090 243 000 Old_age Always
- 10
SMART Error Log Version: 1
ATA Error Count: 2892 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2892 occurred at disk power-on lifetime: 57 hours (2 days + 9 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ca 00 dc e6 Error: UNC at LBA = 0x06dc00ca = 115081418
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 c7 00 dc e6 00 04:14:16.881 READ DMA
27 00 00 00 00 00 e0 02 04:14:16.816 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 04:14:16.813 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 04:14:16.315 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 02 04:13:46.245 READ NATIVE MAX ADDRESS EXT
Error 2891 occurred at disk power-on lifetime: 57 hours (2 days + 9 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ca 00 dc e6 Error: UNC at LBA = 0x06dc00ca = 115081418
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 c7 00 dc e6 00 04:14:16.881 READ DMA
27 00 00 00 00 00 e0 02 04:14:16.816 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 04:14:16.813 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 04:14:16.315 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 02 04:13:46.245 READ NATIVE MAX ADDRESS EXT
Error 2890 occurred at disk power-on lifetime: 57 hours (2 days + 9 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ca 00 dc e6 Error: UNC at LBA = 0x06dc00ca = 115081418
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 c7 00 dc e6 00 04:13:15.418 READ DMA
27 00 00 00 00 00 e0 02 04:13:15.415 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 04:13:14.917 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 04:12:44.847 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 02 04:13:46.245 READ NATIVE MAX ADDRESS EXT
Error 2889 occurred at disk power-on lifetime: 57 hours (2 days + 9 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ca 00 dc e6 Error: UNC at LBA = 0x06dc00ca = 115081418
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 c7 00 dc e6 00 04:13:15.418 READ DMA
27 00 00 00 00 00 e0 02 04:13:15.415 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 04:13:14.917 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 04:12:44.847 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 02 04:12:44.792 READ NATIVE MAX ADDRESS EXT
Error 2888 occurred at disk power-on lifetime: 57 hours (2 days + 9 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ca 00 dc e6 Error: UNC at LBA = 0x06dc00ca = 115081418
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 c7 00 dc e6 00 04:12:14.016 READ DMA
27 00 00 00 00 00 e0 02 04:12:13.518 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 04:11:43.449 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 04:12:44.847 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 02 04:12:44.792 READ NATIVE MAX ADDRESS EXT
SMART Self-test log structure revision number 1
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
sdc:
smartctl version 5.37 [i586-mandriva-linux-gnu] Copyright (C) 2002-6
Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: MAXTOR STM3500630AS
Serial Number: 9QG1WMBW
Firmware Version: 3.AAE
User Capacity: 500,107,862,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Oct 25 21:02:54 2007 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no
self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 163) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH
TYPE UPDATED WHEN_FAILED RAW_VALUE
1
Raw_Read_Error_Rate 0x000f 114 100 006 Pre-fail Always
- 79425540
3
Spin_Up_Time 0x0003 093 093 000 Pre-fail Always
- 0
4
Start_Stop_Count 0x0032 100 100 020 Old_age Always
- 28
5
Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always
- 0
7
Seek_Error_Rate 0x000f 066 060 030 Pre-fail Always
- 5098162
9
Power_On_Hours 0x0032 100 100 000 Old_age Always
- 74
10
Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always
- 0
12
Power_Cycle_Count 0x0032 100 100 020 Old_age Always
- 39
187
Unknown_Attribute 0x0032 100 100 000 Old_age Always
- 0
189
Unknown_Attribute 0x003a 100 100 000 Old_age Always
- 0
190
Temperature_Celsius 0x0022 066 055 045 Old_age Always
- 572522530
194
Temperature_Celsius 0x0022 034 045 000 Old_age Always
- 34 (Lifetime Min/Max 0/22)
195
Hardware_ECC_Recovered 0x001a 098 061 000 Old_age Always
- 192191767
197
Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 0
198
Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline
- 0
199
UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
200
Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline
- 0
202
TA_Increase_Count 0x0032 100 253 000 Old_age Always
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
sdd:
smartctl version 5.37 [i586-mandriva-linux-gnu] Copyright (C) 2002-6
Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: MAXTOR STM3500630AS
Serial Number: 9QG1VJ3Y
Firmware Version: 3.AAE
User Capacity: 500,107,862,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Oct 25 21:02:58 2007 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no
self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 163) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH
TYPE UPDATED WHEN_FAILED RAW_VALUE
1
Raw_Read_Error_Rate 0x000f 117 099 006 Pre-fail Always
- 136511127
3
Spin_Up_Time 0x0003 093 093 000 Pre-fail Always
- 0
4
Start_Stop_Count 0x0032 100 100 020 Old_age Always
- 28
5
Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always
- 4
7
Seek_Error_Rate 0x000f 066 060 030 Pre-fail Always
- 5113771
9
Power_On_Hours 0x0032 100 100 000 Old_age Always
- 74
10
Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always
- 0
12
Power_Cycle_Count 0x0032 100 100 020 Old_age Always
- 39
187
Unknown_Attribute 0x0032 100 100 000 Old_age Always
- 0
189
Unknown_Attribute 0x003a 100 100 000 Old_age Always
- 0
190
Temperature_Celsius 0x0022 067 057 045 Old_age Always
- 555679777
194
Temperature_Celsius 0x0022 033 043 000 Old_age Always
- 33 (Lifetime Min/Max 0/21)
195
Hardware_ECC_Recovered 0x001a 107 061 000 Old_age Always
- 207450593
197
Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 0
198
Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline
- 0
199
UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
200
Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline
- 0
202
TA_Increase_Count 0x0032 100 253 000 Old_age Always
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
I then ran
dd if=/dev/sda of=/dev/null bs=1M &
and repeated for sdb, sdc, and sdd.
I got an error
Exit 1 dd if=/dev/sdb of=/dev/null bs=1M
dmesg says:
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:f8:10:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 126976 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:f8:10:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 126976 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:f8:10:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 126976 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:f8:10:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 126976 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:f8:10:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 126976 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:f8:10:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 126976 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 1:0:0:0: [sdb] Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 02 2a 18
sd 1:0:0:0: [sdb] Add. Sense: Unrecovered read error - auto reallocate failed
end_request: I/O error, dev sdb, sector 141848
Buffer I/O error on device sdb, logical block 17731
Buffer I/O error on device sdb, logical block 17732
Buffer I/O error on device sdb, logical block 17733
Buffer I/O error on device sdb, logical block 17734
Buffer I/O error on device sdb, logical block 17735
Buffer I/O error on device sdb, logical block 17736
Buffer I/O error on device sdb, logical block 17737
Buffer I/O error on device sdb, logical block 17738
Buffer I/O error on device sdb, logical block 17739
Buffer I/O error on device sdb, logical block 17740
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:08:2b:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:08:2b:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:08:2b:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:08:2b:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:08:2b:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:08:2b:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:08:2b:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:08:2b:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:08:2b:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:08:2b:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:08:2b:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:08:2b:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 1:0:0:0: [sdb] Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 02 2b 08
sd 1:0:0:0: [sdb] Add. Sense: Unrecovered read error - auto reallocate failed
end_request: I/O error, dev sdb, sector 142088
printk: 20 messages suppressed.
Buffer I/O error on device sdb, logical block 17761
ata2: EH complete
sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:f8:10:2b:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 126976 in
res 51/40:00:10:2b:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:f8:10:2b:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 126976 in
res 51/40:00:10:2b:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:f8:10:2b:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 126976 in
res 51/40:00:10:2b:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:f8:10:2b:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 126976 in
res 51/40:00:10:2b:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:f8:10:2b:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 126976 in
res 51/40:00:10:2b:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:f8:10:2b:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 126976 in
res 51/40:00:10:2b:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 1:0:0:0: [sdb] Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 02 2b 10
sd 1:0:0:0: [sdb] Add. Sense: Unrecovered read error - auto reallocate failed
end_request: I/O error, dev sdb, sector 142096
Buffer I/O error on device sdb, logical block 17762
Buffer I/O error on device sdb, logical block 17763
Buffer I/O error on device sdb, logical block 17764
ata2: EH complete
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:18:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:18:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:18:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:18:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:18:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:18:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 1:0:0:0: [sdb] Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 02 2a 18
sd 1:0:0:0: [sdb] Add. Sense: Unrecovered read error - auto reallocate failed
end_request: I/O error, dev sdb, sector 141848
printk: 28 messages suppressed.
Buffer I/O error on device sdb, logical block 17731
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:18:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:18:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:18:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:18:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:18:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:18:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 1:0:0:0: [sdb] Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 02 2a 18
sd 1:0:0:0: [sdb] Add. Sense: Unrecovered read error - auto reallocate failed
end_request: I/O error, dev sdb, sector 141848
Buffer I/O error on device sdb, logical block 17731
ata2: EH complete
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
I re-ran smartctl -a on /dev/sdb and it says:
smartctl version 5.37 [i586-mandriva-linux-gnu] Copyright (C) 2002-6
Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: MAXTOR STM3500630AS
Serial Number: 9QG1RWTH
Firmware Version: 3.AAE
User Capacity: 500,107,862,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Oct 25 21:35:03 2007 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no
self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 163) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH
TYPE UPDATED WHEN_FAILED RAW_VALUE
1
Raw_Read_Error_Rate 0x000f 114 088 006 Pre-fail Always
- 63140281
3
Spin_Up_Time 0x0003 093 093 000 Pre-fail Always
- 0
4
Start_Stop_Count 0x0032 100 100 020 Old_age Always
- 27
5
Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always
- 12
7
Seek_Error_Rate 0x000f 063 060 030 Pre-fail Always
- 2049193
9
Power_On_Hours 0x0032 100 100 000 Old_age Always
- 74
10
Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always
- 0
12
Power_Cycle_Count 0x0032 100 100 020 Old_age Always
- 39
187
Unknown_Attribute 0x0032 001 001 000 Old_age Always
- 1225
189
Unknown_Attribute 0x003a 100 100 000 Old_age Always
- 0
190
Temperature_Celsius 0x0022 061 055 045 Old_age Always
- 656408615
194
Temperature_Celsius 0x0022 039 045 000 Old_age Always
- 39 (Lifetime Min/Max 0/22)
195
Hardware_ECC_Recovered 0x001a 072 050 000 Old_age Always
- 142192359
197
Current_Pending_Sector 0x0012 069 069 000 Old_age Always
- 653
198
Offline_Uncorrectable 0x0010 069 069 000 Old_age Offline
- 653
199
UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
200
Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline
- 0
202
TA_Increase_Count 0x0032 089 242 000 Old_age Always
- 11
SMART Error Log Version: 1
ATA Error Count: 2922 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2922 occurred at disk power-on lifetime: 74 hours (3 days + 2 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 18 2a 02 e0 Error: UNC at LBA = 0x00022a18 = 141848
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 18 2a 02 e0 00 00:30:36.883 READ DMA
27 00 00 00 00 00 e0 02 00:30:36.758 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:30:35.189 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 02 00:30:38.826 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 02 00:30:38.769 READ NATIVE MAX ADDRESS EXT
Error 2921 occurred at disk power-on lifetime: 74 hours (3 days + 2 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 18 2a 02 e0 Error: UNC at LBA = 0x00022a18 = 141848
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 18 2a 02 e0 00 00:30:36.883 READ DMA
27 00 00 00 00 00 e0 02 00:30:36.758 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:30:35.189 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 02 00:30:35.132 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 02 00:30:35.129 READ NATIVE MAX ADDRESS EXT
Error 2920 occurred at disk power-on lifetime: 74 hours (3 days + 2 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 18 2a 02 e0 Error: UNC at LBA = 0x00022a18 = 141848
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 18 2a 02 e0 00 00:30:33.087 READ DMA
27 00 00 00 00 00 e0 02 00:30:31.518 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:30:35.189 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 02 00:30:35.132 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 02 00:30:35.129 READ NATIVE MAX ADDRESS EXT
Error 2919 occurred at disk power-on lifetime: 74 hours (3 days + 2 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 18 2a 02 e0 Error: UNC at LBA = 0x00022a18 = 141848
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 18 2a 02 e0 00 00:30:33.087 READ DMA
27 00 00 00 00 00 e0 02 00:30:31.518 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:30:31.462 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 02 00:30:31.459 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 02 00:30:31.443 READ NATIVE MAX ADDRESS EXT
Error 2918 occurred at disk power-on lifetime: 74 hours (3 days + 2 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 18 2a 02 e0 Error: UNC at LBA = 0x00022a18 = 141848
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 18 2a 02 e0 00 00:30:27.863 READ DMA
27 00 00 00 00 00 e0 02 00:30:31.518 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:30:31.462 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 02 00:30:31.459 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 02 00:30:31.443 READ NATIVE MAX ADDRESS EXT
SMART Self-test log structure revision number 1
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Based on all of the above, I now suspect a hardware problem with
/dev/sdb (as you suspected), which was formerly /dev/sda.
There were two errors with the drive currently attached to /dev/sda,
but if they
don't come back, I won't worry.
Do you concur?
Thanks,
jeff
^ permalink raw reply [flat|nested] 7+ messages in thread