* [Xenomai-help] irq matter
@ 2007-10-30 12:27 Roland Tollenaar
0 siblings, 0 replies; 3+ messages in thread
From: Roland Tollenaar @ 2007-10-30 12:27 UTC (permalink / raw)
To: Xenomai-help
Hi,
I have found that if I have the rtnet device on IRQ5 sharing it only the
the SATA controller that all is fine until
lsusb -v
is called. In dmesg we then see:
xinitr-irq-handler: IRQ5 not handled Disabling IRQ line.
Firstly, why is this? None of the USB's are on IRQ line 5. Secondly is
the action "Disabling the IRQ line" not a bit harsh?
Regards,
Roland
^ permalink raw reply [flat|nested] 3+ messages in thread
* [Xenomai-help] irq matter
@ 2007-10-30 12:51 Roland Tollenaar
2007-10-30 13:04 ` Jan Kiszka
0 siblings, 1 reply; 3+ messages in thread
From: Roland Tollenaar @ 2007-10-30 12:51 UTC (permalink / raw)
To: Xenomai-help
Sorry a slight elaboration is necessary here. I found that the conflict
on IRQ 5 (diabling by xenomai) just occurs if a usbtouchscreen device
which I am planning to use is plugged in. For the record, there is as
yet no driver loaded for the touch screen.
But is still does not solve the mystery of why there should be a
conflict with irq 5 is no usb socket has this irqline.
Roland
Hi,
I have found that if I have the rtnet device on IRQ5 sharing it only the
the SATA controller that all is fine until
lsusb -v
is called. In dmesg we then see:
xinitr-irq-handler: IRQ5 not handled Disabling IRQ line.
Firstly, why is this? None of the USB's are on IRQ line 5. Secondly is
the action "Disabling the IRQ line" not a bit harsh?
Regards,
Roland
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Xenomai-help] irq matter
2007-10-30 12:51 [Xenomai-help] irq matter Roland Tollenaar
@ 2007-10-30 13:04 ` Jan Kiszka
0 siblings, 0 replies; 3+ messages in thread
From: Jan Kiszka @ 2007-10-30 13:04 UTC (permalink / raw)
To: rolandtollenaar; +Cc: Xenomai-help
Roland Tollenaar wrote:
> Sorry a slight elaboration is necessary here. I found that the conflict
> on IRQ 5 (diabling by xenomai) just occurs if a usbtouchscreen device
> which I am planning to use is plugged in. For the record, there is as
> yet no driver loaded for the touch screen.
>
> But is still does not solve the mystery of why there should be a
> conflict with irq 5 is no usb socket has this irqline.
Please provide your full kernel log from boot-up until the problem occurs.
>
> Roland
>
>
> Hi,
>
> I have found that if I have the rtnet device on IRQ5 sharing it only the
> the SATA controller that all is fine until
>
> lsusb -v
>
> is called. In dmesg we then see:
>
> xinitr-irq-handler: IRQ5 not handled Disabling IRQ line.
>
> Firstly, why is this? None of the USB's are on IRQ line 5. Secondly is
> the action "Disabling the IRQ line" not a bit harsh?
The alternative to disabling the line is "bricking" your box, as older
Xenomai used to do. What do you prefer? :)
Jan
--
Siemens AG, Corporate Technology, CT SE 2
Corporate Competence Center Embedded Linux
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2007-10-30 13:04 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-10-30 12:51 [Xenomai-help] irq matter Roland Tollenaar
2007-10-30 13:04 ` Jan Kiszka
-- strict thread matches above, loose matches on Subject: below --
2007-10-30 12:27 Roland Tollenaar
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.