From: Jochen Friedrich <jochen@scram.de>
To: "linuxppc-embedded@ozlabs.org" <linuxppc-embedded@ozlabs.org>
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH1/2] [POWERPC] Kill non-existant symbols from ksyms and commproc.h
Date: Sat, 03 Nov 2007 20:01:06 +0100 [thread overview]
Message-ID: <472CC572.9050508@scram.de> (raw)
Remove exports of __res and cpm_install_handler/cpm_free_handler.
Remove cpm_install_handler/cpm_free_handler from the commproc.h as well.
Both were used for ARCH=ppc and aren't defined for ARCH=powerpc.
CC arch/powerpc/kernel/ppc_ksyms.o
arch/powerpc/kernel/ppc_ksyms.c:180: error: '__res' undeclared here (not in a function)
arch/powerpc/kernel/ppc_ksyms.c:180: warning: type defaults to 'int' in declaration of '__res'
make[1]: *** [arch/powerpc/kernel/ppc_ksyms.o] Error 1
make: *** [arch/powerpc/kernel] Error 2
LD .tmp_vmlinux1
arch/powerpc/kernel/built-in.o:(__ksymtab+0x198): undefined reference to `cpm_free_handler'
arch/powerpc/kernel/built-in.o:(__ksymtab+0x1a0): undefined reference to `cpm_install_handler'
make: *** [.tmp_vmlinux1] Error 1
Signed-off-by: Jochen Friedrich <jochen@scram.de>
---
arch/powerpc/kernel/ppc_ksyms.c | 12 ------------
include/asm-powerpc/commproc.h | 3 ---
2 files changed, 0 insertions(+), 15 deletions(-)
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index c6b1aa3..13ebeb2 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -45,10 +45,6 @@
#include <asm/signal.h>
#include <asm/dcr.h>
-#ifdef CONFIG_8xx
-#include <asm/commproc.h>
-#endif
-
#ifdef CONFIG_PPC64
EXPORT_SYMBOL(local_irq_restore);
#endif
@@ -172,14 +168,6 @@ EXPORT_SYMBOL(console_drivers);
EXPORT_SYMBOL(cacheable_memcpy);
#endif
-#ifdef CONFIG_8xx
-EXPORT_SYMBOL(cpm_install_handler);
-EXPORT_SYMBOL(cpm_free_handler);
-#endif /* CONFIG_8xx */
-#if defined(CONFIG_8xx)
-EXPORT_SYMBOL(__res);
-#endif
-
#ifdef CONFIG_PPC32
EXPORT_SYMBOL(next_mmu_context);
EXPORT_SYMBOL(set_context);
diff --git a/include/asm-powerpc/commproc.h b/include/asm-powerpc/commproc.h
index 0307c84..5dff922 100644
--- a/include/asm-powerpc/commproc.h
+++ b/include/asm-powerpc/commproc.h
@@ -698,9 +698,6 @@ typedef struct risc_timer_pram {
#define CICR_IEN ((uint)0x00000080) /* Int. enable */
#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
-extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id);
-extern void cpm_free_handler(int vec);
-
#define IMAP_ADDR (get_immrbase())
#define CPM_PIN_INPUT 0
--
1.5.3.4
WARNING: multiple messages have this Message-ID (diff)
From: Jochen Friedrich <jochen@scram.de>
To: "linuxppc-embedded@ozlabs.org" <linuxppc-embedded@ozlabs.org>
Cc: Marcelo Tosatti <marcelo@kvack.org>,
Scott Wood <scottwood@freescale.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH1/2] [POWERPC] Kill non-existant symbols from ksyms and commproc.h
Date: Sat, 03 Nov 2007 20:01:06 +0100 [thread overview]
Message-ID: <472CC572.9050508@scram.de> (raw)
Remove exports of __res and cpm_install_handler/cpm_free_handler.
Remove cpm_install_handler/cpm_free_handler from the commproc.h as well.
Both were used for ARCH=ppc and aren't defined for ARCH=powerpc.
CC arch/powerpc/kernel/ppc_ksyms.o
arch/powerpc/kernel/ppc_ksyms.c:180: error: '__res' undeclared here (not in a function)
arch/powerpc/kernel/ppc_ksyms.c:180: warning: type defaults to 'int' in declaration of '__res'
make[1]: *** [arch/powerpc/kernel/ppc_ksyms.o] Error 1
make: *** [arch/powerpc/kernel] Error 2
LD .tmp_vmlinux1
arch/powerpc/kernel/built-in.o:(__ksymtab+0x198): undefined reference to `cpm_free_handler'
arch/powerpc/kernel/built-in.o:(__ksymtab+0x1a0): undefined reference to `cpm_install_handler'
make: *** [.tmp_vmlinux1] Error 1
Signed-off-by: Jochen Friedrich <jochen@scram.de>
---
arch/powerpc/kernel/ppc_ksyms.c | 12 ------------
include/asm-powerpc/commproc.h | 3 ---
2 files changed, 0 insertions(+), 15 deletions(-)
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index c6b1aa3..13ebeb2 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -45,10 +45,6 @@
#include <asm/signal.h>
#include <asm/dcr.h>
-#ifdef CONFIG_8xx
-#include <asm/commproc.h>
-#endif
-
#ifdef CONFIG_PPC64
EXPORT_SYMBOL(local_irq_restore);
#endif
@@ -172,14 +168,6 @@ EXPORT_SYMBOL(console_drivers);
EXPORT_SYMBOL(cacheable_memcpy);
#endif
-#ifdef CONFIG_8xx
-EXPORT_SYMBOL(cpm_install_handler);
-EXPORT_SYMBOL(cpm_free_handler);
-#endif /* CONFIG_8xx */
-#if defined(CONFIG_8xx)
-EXPORT_SYMBOL(__res);
-#endif
-
#ifdef CONFIG_PPC32
EXPORT_SYMBOL(next_mmu_context);
EXPORT_SYMBOL(set_context);
diff --git a/include/asm-powerpc/commproc.h b/include/asm-powerpc/commproc.h
index 0307c84..5dff922 100644
--- a/include/asm-powerpc/commproc.h
+++ b/include/asm-powerpc/commproc.h
@@ -698,9 +698,6 @@ typedef struct risc_timer_pram {
#define CICR_IEN ((uint)0x00000080) /* Int. enable */
#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
-extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id);
-extern void cpm_free_handler(int vec);
-
#define IMAP_ADDR (get_immrbase())
#define CPM_PIN_INPUT 0
--
1.5.3.4
next reply other threads:[~2007-11-03 19:01 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-03 19:01 Jochen Friedrich [this message]
2007-11-03 19:01 ` [PATCH1/2] [POWERPC] Kill non-existant symbols from ksyms and commproc.h Jochen Friedrich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=472CC572.9050508@scram.de \
--to=jochen@scram.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.