* JTAG init of MPC5200B
@ 2007-11-06 13:30 lokowich
0 siblings, 0 replies; only message in thread
From: lokowich @ 2007-11-06 13:30 UTC (permalink / raw)
To: linuxppc-embedded
I've been unable to properly initialize my MPC5200B from a GDB session
or OCD Commander using a OCDemon JTAG emulator unless the device is
first initialized by U-Boot. I've used same register setup as defined
in the U-Boot startup code. This prevents me from loading a RAM-based
U-Boot onto a bare board over the JTAG interface. Any guidance?
--
Mark Lokowich
Systems Engineer
Advanced Communication Design
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-11-06 14:31 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-11-06 13:30 JTAG init of MPC5200B lokowich
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.