All of lore.kernel.org
 help / color / mirror / Atom feed
From: James Andrewartha <jamesa@daa.com.au>
To: Denys Fedoryshchenko <denys@visp.net.lb>
Cc: Andrew Morton <akpm@linux-foundation.org>,
	linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org,
	alan@lxorguk.ukuu.org.uk, htejun@gmail.com
Subject: Re: SC1200 failure in 2.6.23 and 2.6.24-rc1-git10
Date: Thu, 08 Nov 2007 00:23:10 +0900	[thread overview]
Message-ID: <4731D85E.70201@daa.com.au> (raw)
In-Reply-To: <20071107132630.M65286@visp.net.lb>

Denys Fedoryshchenko wrote:
> On Tue, 6 Nov 2007 22:15:21 -0800, Andrew Morton wrote
>>> On Thu, 1 Nov 2007 23:30:13 +0200 "Denys" <denys@visp.net.lb> wrote:
>>> Finally i got full DMESG with 1GB card till end. Seems not readable too.
>>> scsi0 : sc1200
>>> scsi1 : sc1200
>>> ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
>>> ata2: DUMMY
>>> ata1.00: CFA: SanDisk SDCFH-1024, HDX 3.07, max MWDMA2
>>> ata1.00: 2001888 sectors, multi 0: LBA
>>> ata1.00: configured for MWDMA2
>>> scsi 0:0:0:0: Direct-Access     ATA      SanDisk SDCFH-10 HDX  PQ: 0 
> ANSI: 5
>>> sd 0:0:0:0: [sda] 2001888 512-byte hardware sectors (1025 MB)
>>> sd 0:0:0:0: [sda] Write Protect is off
>>> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't 
> support 
>>> DPO or FUA
>>> sd 0:0:0:0: [sda] 2001888 512-byte hardware sectors (1025 MB)
>>> sd 0:0:0:0: [sda] Write Protect is off
>>> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't 
> support 
>>> DPO or FUA
>>>  sda:<4>Clocksource tsc unstable (delta = -334501841 ns)
>>> Time: pit clocksource has been installed.
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 
> in
>>>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA2
>>> ata1: EH complete
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 
> in
>>>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA2
>>> ata1: EH complete
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 
> in
>>>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA2
>>> ata1: EH complete
>>> ata1.00: limiting speed to MWDMA1:PIO4
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 
> in
>>>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA1
>>> ata1: EH complete
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 
> in
>>>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA1
>>> ata1: EH complete
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 
> in
>>>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA1
>>> sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
>>> sd 0:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
>>> Descriptor sense data with sense descriptors (in hex):
>>>         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
>>>         00 00 00 00
>>> sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x0
>>> end_request: I/O error, dev sda, sector 0
>>> Buffer I/O error on device sda, logical block 0
>>> ata1: EH complete
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 
> in
>>>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA1
>>> ata1: EH complete
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 
> in
>>>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA1
>>> ata1: EH complete
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 
> in
>>>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA1
>>> ata1: EH complete
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 
> in
>>>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA1
>>> ata1: EH complete
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 
> in
>>>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA1
>>> ata1: EH complete
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 
> in
>>>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA1
>>> sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
>>> sd 0:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
>>> Descriptor sense data with sense descriptors (in hex):
>>>         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
>>>         00 00 00 00
>>> sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x0
>>> end_request: I/O error, dev sda, sector 0
>>> Buffer I/O error on device sda, logical block 0
>>> ata1: EH complete
>>>  unable to read partition table
>>> sd 0:0:0:0: [sda] Attached SCSI removable disk
>>> scx200_wdt: timer margin 60 seconds
>>> cpuidle: using governor ladder
>>> enabling scx200 high-res timer (1 MHz +0 ppm)
>>> TCP cubic registered
>>> Time: scx200_hrt clocksource has been installed.
>>> NET: Registered protocol family 1
>>> NET: Registered protocol family 17
>>> Using IPI Shortcut mode
>>> VFS: Cannot open root device "<NULL>" or unknown-block(8,18)
>>> Please append a correct "root=" boot option; here are the available 
>>> partitions:
>>> 0800    1000944 sda driver: sd
>>> Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-
>>> block(8,18)
>>>
>> (+linux-ide)
(+alan, tejun)
>> So this has never worked on any known kernel?
> 
> It is working now on old ide code (not libata).

Can you post the dmesg and hdparm -I of a working boot using the old ide
code? The thing that stuck out to me (as just a reader of linux-ide) was
that the problem involves MWDMA and CF, which have had problems (although
not the same as this one) in the past:
http://thread.gmane.org/gmane.linux.ide/22058 and
http://thread.gmane.org/gmane.linux.ide/22400

-- 
James Andrewartha

  reply	other threads:[~2007-11-07 15:56 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-11-01 21:30 SC1200 failure in 2.6.23 and 2.6.24-rc1-git10 Denys
2007-11-07  6:15 ` Andrew Morton
2007-11-07 13:27   ` Denys Fedoryshchenko
2007-11-07 15:23     ` James Andrewartha [this message]
2007-11-07 16:06       ` Denys Fedoryshchenko
2007-11-07 19:12         ` Mark Lord
2007-11-07 21:22           ` Denys Fedoryshchenko
2007-11-07 22:31             ` Mark Lord
2007-11-07 22:54               ` Alan Cox
2007-11-07 21:36           ` Denys Fedoryshchenko
2007-11-07 23:20           ` Jeff Garzik
2007-11-07 23:24             ` Mark Lord
2007-11-07 23:49             ` Denys Fedoryshchenko
2007-11-08  0:01             ` Denys Fedoryshchenko
2007-11-08  0:30               ` Bartlomiej Zolnierkiewicz
2007-11-08  7:16                 ` Denys Fedoryshchenko
2007-11-08 10:48                   ` Alan Cox
2007-11-08 16:44                     ` Denys Fedoryshchenko
2007-11-08 17:31                       ` Jeff Garzik
2007-11-08 19:56                         ` Denys Fedoryshchenko
2007-11-08 22:40                           ` Alan Cox
2007-11-09  1:44                           ` Tejun Heo
     [not found] <fa.FFqM2AneKZLH2d3/UIeCMjE/RLE@ifi.uio.no>
2007-11-08  1:41 ` Robert Hancock
2007-11-08  7:01   ` Denys Fedoryshchenko
  -- strict thread matches above, loose matches on Subject: below --
2007-11-01 21:25 Denys

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4731D85E.70201@daa.com.au \
    --to=jamesa@daa.com.au \
    --cc=akpm@linux-foundation.org \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=denys@visp.net.lb \
    --cc=htejun@gmail.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.