From: Jochen Friedrich <jochen@scram.de>
To: "linuxppc-embedded@ozlabs.org" <linuxppc-embedded@ozlabs.org>
Cc: Jeff Garzik <jeff@garzik.org>, netdev <netdev@vger.kernel.org>,
linux-kernel@vger.kernel.org, akpm@linux-foundation.org
Subject: [PATCH] powerpc: Fix fs_enet module build
Date: Tue, 13 Nov 2007 19:32:08 +0100 [thread overview]
Message-ID: <4739EDA8.6020800@scram.de> (raw)
If fs_enet is build as module, on PPC_CPM_NEW_BINDING platforms
mii-fec/mii-bitbang should be build as module, as well. On other
platforms, mii-fec/mii-bitbang must be included into the main module.
Otherwise some symbols remain undefined. Additionally, fs_enet uses
libphy, so add a select PHYLIB.
Building modules, stage 2.
MODPOST 5 modules
ERROR: "fs_scc_ops" [drivers/net/fs_enet/fs_enet.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2
Signed-off-by: Jochen Friedrich <jochen@scram.de>
---
This patch replaces powerpc-fs_enet-select-phylib-as-the-driver-needs-it.patch
from -mm.
drivers/net/fs_enet/Kconfig | 11 ++++++++++-
drivers/net/fs_enet/Makefile | 15 ++++++++++++---
2 files changed, 22 insertions(+), 4 deletions(-)
diff --git a/drivers/net/fs_enet/Kconfig b/drivers/net/fs_enet/Kconfig
index 2765e49..562ea68 100644
--- a/drivers/net/fs_enet/Kconfig
+++ b/drivers/net/fs_enet/Kconfig
@@ -2,6 +2,7 @@ config FS_ENET
tristate "Freescale Ethernet Driver"
depends on CPM1 || CPM2
select MII
+ select PHYLIB
config FS_ENET_HAS_SCC
bool "Chip has an SCC usable for ethernet"
@@ -11,11 +12,19 @@ config FS_ENET_HAS_SCC
config FS_ENET_HAS_FCC
bool "Chip has an FCC usable for ethernet"
depends on FS_ENET && CPM2
- select MDIO_BITBANG
default y
config FS_ENET_HAS_FEC
bool "Chip has an FEC usable for ethernet"
depends on FS_ENET && CPM1
+ select FS_ENET_MDIO_FEC
default y
+config FS_ENET_MDIO_FEC
+ tristate "MDIO driver for FEC"
+ depends on FS_ENET && CPM1
+
+config FS_ENET_MDIO_FCC
+ tristate "MDIO driver for FCC"
+ depends on FS_ENET && CPM2
+ select MDIO_BITBANG
diff --git a/drivers/net/fs_enet/Makefile b/drivers/net/fs_enet/Makefile
index 02d4dc1..1ffbe07 100644
--- a/drivers/net/fs_enet/Makefile
+++ b/drivers/net/fs_enet/Makefile
@@ -4,7 +4,16 @@
obj-$(CONFIG_FS_ENET) += fs_enet.o
-obj-$(CONFIG_8xx) += mac-fec.o mac-scc.o mii-fec.o
-obj-$(CONFIG_CPM2) += mac-fcc.o mii-bitbang.o
+fs_enet-$(CONFIG_FS_ENET_HAS_SCC) += mac-scc.o
+fs_enet-$(CONFIG_FS_ENET_HAS_FEC) += mac-fec.o
+fs_enet-$(CONFIG_FS_ENET_HAS_FCC) += mac-fcc.o
-fs_enet-objs := fs_enet-main.o
+ifeq ($(CONFIG_PPC_CPM_NEW_BINDING),y)
+obj-$(CONFIG_FS_ENET_MDIO_FEC) += mii-fec.o
+obj-$(CONFIG_FS_ENET_MDIO_FCC) += mii-bitbang.o
+else
+fs_enet-$(CONFIG_FS_ENET_MDIO_FEC) += mii-fec.o
+fs_enet-$(CONFIG_FS_ENET_MDIO_FCC) += mii-bitbang.o
+endif
+
+fs_enet-objs := fs_enet-main.o $(fs_enet-m)
--
1.5.3.5
WARNING: multiple messages have this Message-ID (diff)
From: Jochen Friedrich <jochen@scram.de>
To: "linuxppc-embedded@ozlabs.org" <linuxppc-embedded@ozlabs.org>
Cc: Marcelo Tosatti <marcelo@kvack.org>,
Scott Wood <scottwood@freescale.com>,
linux-kernel@vger.kernel.org, Jeff Garzik <jeff@garzik.org>,
netdev <netdev@vger.kernel.org>,
akpm@linux-foundation.org
Subject: [PATCH] powerpc: Fix fs_enet module build
Date: Tue, 13 Nov 2007 19:32:08 +0100 [thread overview]
Message-ID: <4739EDA8.6020800@scram.de> (raw)
If fs_enet is build as module, on PPC_CPM_NEW_BINDING platforms
mii-fec/mii-bitbang should be build as module, as well. On other
platforms, mii-fec/mii-bitbang must be included into the main module.
Otherwise some symbols remain undefined. Additionally, fs_enet uses
libphy, so add a select PHYLIB.
Building modules, stage 2.
MODPOST 5 modules
ERROR: "fs_scc_ops" [drivers/net/fs_enet/fs_enet.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2
Signed-off-by: Jochen Friedrich <jochen@scram.de>
---
This patch replaces powerpc-fs_enet-select-phylib-as-the-driver-needs-it.patch
from -mm.
drivers/net/fs_enet/Kconfig | 11 ++++++++++-
drivers/net/fs_enet/Makefile | 15 ++++++++++++---
2 files changed, 22 insertions(+), 4 deletions(-)
diff --git a/drivers/net/fs_enet/Kconfig b/drivers/net/fs_enet/Kconfig
index 2765e49..562ea68 100644
--- a/drivers/net/fs_enet/Kconfig
+++ b/drivers/net/fs_enet/Kconfig
@@ -2,6 +2,7 @@ config FS_ENET
tristate "Freescale Ethernet Driver"
depends on CPM1 || CPM2
select MII
+ select PHYLIB
config FS_ENET_HAS_SCC
bool "Chip has an SCC usable for ethernet"
@@ -11,11 +12,19 @@ config FS_ENET_HAS_SCC
config FS_ENET_HAS_FCC
bool "Chip has an FCC usable for ethernet"
depends on FS_ENET && CPM2
- select MDIO_BITBANG
default y
config FS_ENET_HAS_FEC
bool "Chip has an FEC usable for ethernet"
depends on FS_ENET && CPM1
+ select FS_ENET_MDIO_FEC
default y
+config FS_ENET_MDIO_FEC
+ tristate "MDIO driver for FEC"
+ depends on FS_ENET && CPM1
+
+config FS_ENET_MDIO_FCC
+ tristate "MDIO driver for FCC"
+ depends on FS_ENET && CPM2
+ select MDIO_BITBANG
diff --git a/drivers/net/fs_enet/Makefile b/drivers/net/fs_enet/Makefile
index 02d4dc1..1ffbe07 100644
--- a/drivers/net/fs_enet/Makefile
+++ b/drivers/net/fs_enet/Makefile
@@ -4,7 +4,16 @@
obj-$(CONFIG_FS_ENET) += fs_enet.o
-obj-$(CONFIG_8xx) += mac-fec.o mac-scc.o mii-fec.o
-obj-$(CONFIG_CPM2) += mac-fcc.o mii-bitbang.o
+fs_enet-$(CONFIG_FS_ENET_HAS_SCC) += mac-scc.o
+fs_enet-$(CONFIG_FS_ENET_HAS_FEC) += mac-fec.o
+fs_enet-$(CONFIG_FS_ENET_HAS_FCC) += mac-fcc.o
-fs_enet-objs := fs_enet-main.o
+ifeq ($(CONFIG_PPC_CPM_NEW_BINDING),y)
+obj-$(CONFIG_FS_ENET_MDIO_FEC) += mii-fec.o
+obj-$(CONFIG_FS_ENET_MDIO_FCC) += mii-bitbang.o
+else
+fs_enet-$(CONFIG_FS_ENET_MDIO_FEC) += mii-fec.o
+fs_enet-$(CONFIG_FS_ENET_MDIO_FCC) += mii-bitbang.o
+endif
+
+fs_enet-objs := fs_enet-main.o $(fs_enet-m)
--
1.5.3.5
next reply other threads:[~2007-11-13 18:32 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-13 18:32 Jochen Friedrich [this message]
2007-11-13 18:32 ` [PATCH] powerpc: Fix fs_enet module build Jochen Friedrich
2007-11-14 5:09 ` David Miller
2007-11-14 5:09 ` David Miller
2007-11-14 11:59 ` Jochen Friedrich
2007-11-14 11:59 ` Jochen Friedrich
2007-11-14 23:51 ` David Miller
2007-11-14 23:51 ` David Miller
-- strict thread matches above, loose matches on Subject: below --
2007-11-03 20:45 [PATCH] [POWERPC] " Jochen Friedrich
2007-11-03 20:45 ` Jochen Friedrich
2007-11-05 16:19 ` Scott Wood
2007-11-05 16:19 ` Scott Wood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4739EDA8.6020800@scram.de \
--to=jochen@scram.de \
--cc=akpm@linux-foundation.org \
--cc=jeff@garzik.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-embedded@ozlabs.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.