All of lore.kernel.org
 help / color / mirror / Atom feed
From: Albert Lee <albertcc@tw.ibm.com>
To: Jeff Garzik <jeff@garzik.org>
Cc: Tejun Heo <htejun@gmail.com>, Mark Lord <liml@rtr.ca>,
	Alan Cox <alan@lxorguk.ukuu.org.uk>,
	linux-ide@vger.kernel.org
Subject: [PATCH 1/2] libata: workaround DRQ=1 ERR=1 for ATAPI tape drives
Date: Wed, 14 Nov 2007 14:13:05 +0800	[thread overview]
Message-ID: <473A91F1.1060003@tw.ibm.com> (raw)
In-Reply-To: <473A56CE.4080804@gmail.com>

After an error condition, some ATAPI tape drives set DRQ=1 together with ERR=1
when asking the host to transfer the CDB of the next packet command (i.e. request sense).
This patch, a revised version of Alan/Mark's previous patch, adds ATA_HORKAGE_STUCK_ERR
to workaround the problem by ignoring the ERR bit and proceed sending the CDB.


Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Mark Lord <liml@rtr.ca>
---
Revised per Alan, Mark and Tejun's comments. Tested ok with the Seagate STT8000A tape drive.
Patch against the libata-dev tree.

diff -Nrup 00_libata-dev/drivers/ata/libata-core.c 01_ide_tape_stuck_err/drivers/ata/libata-core.c
--- 00_libata-dev/drivers/ata/libata-core.c	2007-11-14 10:08:36.000000000 +0800
+++ 01_ide_tape_stuck_err/drivers/ata/libata-core.c	2007-11-14 11:20:31.000000000 +0800
@@ -5490,11 +5490,19 @@ fsm_start:
 		 * let the EH abort the command or reset the device.
 		 */
 		if (unlikely(status & (ATA_ERR | ATA_DF))) {
-			ata_port_printk(ap, KERN_WARNING, "DRQ=1 with device "
-					"error, dev_stat 0x%X\n", status);
-			qc->err_mask |= AC_ERR_HSM;
-			ap->hsm_task_state = HSM_ST_ERR;
-			goto fsm_start;
+			/* Some ATAPI tape drives forget to clear the ERR bit
+			 * when doing the next command (mostly request sense).
+			 * We ignore ERR here to workaround and proceed sending
+			 * the CDB.
+			 */
+			if (!(qc->dev->horkage & ATA_HORKAGE_STUCK_ERR)) {
+				ata_port_printk(ap, KERN_WARNING,
+						"DRQ=1 with device error, "
+						"dev_stat 0x%X\n", status);
+				qc->err_mask |= AC_ERR_HSM;
+				ap->hsm_task_state = HSM_ST_ERR;
+				goto fsm_start;
+			}
 		}
 
 		/* Send the CDB (atapi) or the first data block (ata pio out).
diff -Nrup 00_libata-dev/include/linux/libata.h 01_ide_tape_stuck_err/include/linux/libata.h
--- 00_libata-dev/include/linux/libata.h	2007-11-14 10:08:59.000000000 +0800
+++ 01_ide_tape_stuck_err/include/linux/libata.h	2007-11-14 11:19:32.000000000 +0800
@@ -340,6 +340,7 @@ enum {
 	ATA_HORKAGE_HPA_SIZE	= (1 << 6),	/* native size off by one */
 	ATA_HORKAGE_IPM		= (1 << 7),	/* Link PM problems */
 	ATA_HORKAGE_IVB		= (1 << 8),	/* cbl det validity bit bugs */
+	ATA_HORKAGE_STUCK_ERR	= (1 << 9),	/* stuck ERR on next PACKET */
 
 	 /* DMA mask for user DMA control: User visible values; DO NOT
 	    renumber */



  reply	other threads:[~2007-11-14  6:13 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-10-22  9:24 ATA tape drive STT3401A needs DRQ HSM workaround too Tejun Heo
2007-10-22  9:31 ` Alan Cox
2007-10-22  9:30   ` Tejun Heo
2007-10-22 14:18 ` Mark Lord
2007-10-22 18:37 ` Jeff Garzik
2007-10-22 22:36   ` Mark Lord
2007-11-13 10:08     ` Albert Lee
2007-11-13 10:30       ` [PATCH] libata: workaround DRQ=1 ERR=1 for ATAPI tape drives Albert Lee
2007-11-13 10:35         ` Tejun Heo
2007-11-13 13:49         ` Mark Lord
2007-11-13 14:16           ` Mark Lord
2007-11-13 15:14           ` Alan Cox
2007-11-13 17:24             ` Mark Lord
2007-11-13 18:12               ` Alan Cox
2007-11-13 18:22                 ` Mark Lord
2007-11-14  2:00                   ` Tejun Heo
2007-11-14  6:13                     ` Albert Lee [this message]
2007-11-14 12:19                       ` [PATCH 1/2] " Alan Cox
2007-11-15  0:32                       ` Tejun Heo
2007-11-14  6:20                     ` [PATCH 2/2] libata: use ATA_HORKAGE_STUCK_ERR " Albert Lee
2007-11-15  0:33                       ` Tejun Heo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=473A91F1.1060003@tw.ibm.com \
    --to=albertcc@tw.ibm.com \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=albertl@mail.com \
    --cc=htejun@gmail.com \
    --cc=jeff@garzik.org \
    --cc=liml@rtr.ca \
    --cc=linux-ide@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.