All of lore.kernel.org
 help / color / mirror / Atom feed
From: Simon Arlott <simon@fire.lp0.eu>
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	netdev@vger.kernel.org
Subject: 2.6.23 WARNING: at kernel/softirq.c:139 local_bh_enable()
Date: Thu, 22 Nov 2007 19:47:35 +0000	[thread overview]
Message-ID: <4745DCD7.8070805@simon.arlott.org.uk> (raw)

WARN during log message being output to ttyS0 and netconsole:

[2059664.615816] __iptables__: init4 IN=ppp0 OUT=ppp0 WARNING: at kernel/softirq.c:139 local_bh_enable()
[2059664.620535]  [<80120364>] local_bh_enable+0x3c/0x97
[2059664.620553]  [<802e3356>] __nf_ct_ext_destroy+0x35/0x5b
[2059664.620569]  [<802dfbeb>] destroy_conntrack+0x5e/0xf6
[2059664.620577]  [<802db821>] nf_conntrack_destroy+0x1f/0x3f
[2059664.620585]  [<802c0c71>] __kfree_skb+0xb8/0xf6
[2059664.620597]  [<802d00f0>] zap_completion_queue+0x3e/0x64
[2059664.620606]  [<802d0583>] find_skb+0x14/0x6b
[2059664.620612]  [<801167cc>] inc_nr_running+0x12/0x25
[2059664.620622]  [<802d0fd8>] netpoll_send_udp+0x2d/0x251
[2059664.620630]  [<80226135>] uart_console_write+0x2a/0x33
[2059664.620645]  [<80241319>] write_msg+0x32/0x41
[2059664.620657]  [<8011c205>] __call_console_drivers+0x61/0x6d
[2059664.620669]  [<8011c3fc>] release_console_sem+0x164/0x1bf
[2059664.620679]  [<8011c81f>] vprintk+0x27a/0x2ff
[2059664.620692]  [<8013881e>] handle_IRQ_event+0x1a/0x3f
[2059664.620702]  [<801203a5>] local_bh_enable+0x7d/0x97
[2059664.620709]  [<8031ae6a>] fn_hash_lookup+0xb0/0xcd
[2059664.620723]  [<8011c8bf>] printk+0x1b/0x1f
[2059664.620731]  [<8032b372>] ipt_log_packet+0x71/0x15e
[2059664.620747]  [<8032b4a0>] ipt_log_target+0x41/0x4a
[2059664.620757]  [<802ea446>] ipt_limit_match+0x58/0x76
[2059664.620766]  [<8032b45f>] ipt_log_target+0x0/0x4a
[2059664.620774]  [<803288c5>] ipt_do_table+0x3e2/0x479
[2059664.620785]  [<80331228>] xfrm_policy_put_afinfo+0xa/0x1e
[2059664.620800]  [<80332219>] xfrm_lookup+0x15/0x69
[2059664.620809]  [<802db7d0>] nf_iterate+0x38/0x6a
[2059664.620822]  [<802dbb60>] nf_hook_slow+0x57/0xe0
[2059664.620830]  [<802f1e7c>] ip_forward_finish+0x0/0x22
[2059664.620841]  [<802f20d1>] ip_forward+0x233/0x2ae
[2059664.620849]  [<802f1e7c>] ip_forward_finish+0x0/0x22
[2059664.620859]  [<802f0e7a>] ip_rcv+0x46f/0x49c
[2059664.620866]  [<802f04a8>] ip_rcv_finish+0x0/0x2ab
[2059664.620876]  [<802f0a0b>] ip_rcv+0x0/0x49c
[2059664.620884]  [<802c544a>] netif_receive_skb+0x326/0x3ae
[2059664.620894]  [<802c6efe>] process_backlog+0x6d/0xd2
[2059664.620903]  [<802c766e>] net_rx_action+0x86/0x193
[2059664.620911]  [<80120001>] __do_softirq+0x40/0x85
[2059664.620919]  [<8012006d>] do_softirq+0x27/0x2b
[2059664.620925]  [<8012023d>] irq_exit+0x2d/0x37
[2059664.620931]  [<801062d9>] do_IRQ+0x7a/0x8d
[2059664.620943]  [<8010479b>] common_interrupt+0x23/0x28
[2059664.620954]  [<80209f85>] acpi_processor_idle+0x235/0x3a0
[2059664.620967]  [<80102344>] cpu_idle+0x43/0x6c
[2059664.620973]  [<804aa99e>] start_kernel+0x210/0x215
[2059664.620989]  [<804aa317>] unknown_bootoption+0x0/0x195
[2059664.620998]  =======================
[2059664.852188] SRC=66.249.93.147 DST=* LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=23868 DF PROTO=TCP SPT=80 DPT=55219 WINDOW=0 RES=0x00 RST URGP=0


[    0.000000] Linux version 2.6.23-git (byte@proxima) (gcc version 4.1.2 20070214 ( (gdc 0.23, using dmd 1.007)) (Gentoo 4.1.2)) #41 PREEMPT Sun Oct 21 20:42:28 BST 2007
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
[    0.000000]  BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 1022MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f4d50
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] Entering add_active_range(0, 0, 261856) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   261856
[    0.000000]   HighMem    261856 ->   261856
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   261856
[    0.000000] On node 0 totalpages: 261856
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 2013 pages used for memmap
[    0.000000]   Normal zone: 255747 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP 000F6E10, 0014 (r0 CN700 )
[    0.000000] ACPI: RSDT 3FEE3040, 002C (r1 CN700  AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: FACP 3FEE30C0, 0074 (r1 CN700  AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: DSDT 3FEE3180, 4FC3 (r1 CN700  AWRDACPI     1000 MSFT  100000E)
[    0.000000] ACPI: FACS 3FEE0000, 0040
[    0.000000] ACPI: APIC 3FEE81C0, 005A (r1 CN700  AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:10 APIC version 20
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option.
[    0.000000] Using ACPI for processor (LAPIC) configuration information
[    0.000000] Intel MultiProcessor Specification v1.4
[    0.000000]     Virtual Wire compatibility mode.
[    0.000000] OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
[    0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Processors: 1
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:bed00000)
[    0.000000] Built 1 zonelists in Zone order.  Total pages: 259811
[    0.000000] Kernel command line: root=/dev/hda1 ro panic=10 netconsole=9@192.168.7.4/eth0,1649@192.168.7.255/ noapic console=tty0 console=ttyS0,115200
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1500.153 MHz processor.
[   14.647474] Console: colour dummy device 80x25
[   14.647481] console [tty0] enabled
[   14.647699] console [ttyS0] enabled
[   14.941991] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   14.950229] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   15.005288] Memory: 1033552k/1047424k available (2593k kernel code, 13388k reserved, 1145k data, 184k init, 0k highmem)
[   15.016075] virtual kernel memory layout:
[   15.016077]     fixmap  : 0xfffa8000 - 0xfffff000   ( 348 kB)
[   15.016081]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[   15.016084]     vmalloc : 0xc0800000 - 0xffbfe000   (1011 MB)
[   15.016087]     lowmem  : 0x80000000 - 0xbfee0000   (1022 MB)
[   15.016090]       .init : 0x804aa000 - 0x804d8000   ( 184 kB)
[   15.016093]       .data : 0x80388720 - 0x804a6dbc   (1145 kB)
[   15.016096]       .text : 0x80100000 - 0x80388720   (2593 kB)
[   15.060188] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   15.148426] Calibrating delay using timer specific routine.. 3002.32 BogoMIPS (lpj=6004643)
[   15.156857] Security Framework v1.0.0 initialized
[   15.161589] Mount-cache hash table entries: 512
[   15.166285] CPU: After generic identify, caps: a7c9bbff 00100000 00000000 00000000 00000181 00000000 00000000 00000000
[   15.166303] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   15.173433] CPU: L2 Cache: 128K (64 bytes/line)
[   15.177960] CPU: After all inits, caps: 27c9bbff 00100000 00000000 00000000 00000181 00003fcc 00000000 00000000
[   15.177980] Compat vDSO mapped to ffffe000.
[   15.182174] CPU: Centaur VIA Esther processor 1500MHz stepping 09
[   15.188300] Checking 'hlt' instruction... OK.
[   15.205044] ACPI: Core revision 20070126
[   15.214086] Parsing all Control Methods:
[   15.218032] Table [DSDT](id 0001) - 676 Objects with 57 Devices 178 Methods 38 Regions
[   15.226134]  tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
[   15.234256] ACPI: setting ELCR to 0200 (from 0ea0)
[   15.266502] evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
[   15.380608] NET: Registered protocol family 16
[   15.385280] ACPI: bus type pci registered
[   15.397856] PCI: PCI BIOS revision 2.10 entry at 0xfa9b0, last bus=1
[   15.404208] PCI: Using configuration type 1
[   15.408389] Setting up standard PCI resources
[   15.415770] evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 0F [_GPE] 2 regs on int 0x9
[   15.424744] evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 5 Wake, Enabled 0 Runtime GPEs in this block
[   15.434348] ACPI: EC: Look up EC in DSDT
[   15.440740] Completing Region/Field/Buffer/Package initialization:.........................................................................
[   15.457628] Initialized 23/38 Regions 18/18 Fields 18/18 Buffers 14/24 Packages (685 nodes)
[   15.466162] Initializing Device/Processor/Thermal objects by executing _INI methods:..
[   15.475939] Executed 2 _INI methods requiring 1 _STA executions (examined 61 objects)
[   15.484013] ACPI: Interpreter enabled
[   15.487679] ACPI: (supports S0 S1 S5)
[   15.491404] ACPI: Using PIC for interrupt routing
[   15.508082] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   15.514008] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   15.603552] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 *7 10 11 12)
[   15.610379] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[   15.617383] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
[   15.624191] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12)
[   15.630938] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[   15.638840] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[   15.646733] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[   15.654633] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[   15.662610] ACPI: PCI Interrupt Link [ALKA] (IRQs *20), disabled.
[   15.669089] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
[   15.674591] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
[   15.680160] ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled.
[   15.686489] Linux Plug and Play Support v0.97 (c) Adam Belay
[   15.692194] pnp: PnP ACPI init
[   15.695264] ACPI: bus type pnp registered
[   15.705810] pnp: PnP ACPI: found 10 devices
[   15.710014] ACPI: ACPI bus type pnp unregistered
[   15.714958] SCSI subsystem initialized
[   15.718858] usbcore: registered new interface driver usbfs
[   15.724424] usbcore: registered new interface driver hub
[   15.729789] usbcore: registered new device driver usb
[   15.735063] PCI: Using ACPI for IRQ routing
[   15.739249] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   15.771871] NET: Registered protocol family 8
[   15.776230] NET: Registered protocol family 20
[   15.783850] Time: tsc clocksource has been installed.
[   15.795894] pnp: 00:00: iomem range 0xf0000-0xf3fff could not be reserved
[   15.802679] pnp: 00:00: iomem range 0xf4000-0xf7fff could not be reserved
[   15.809462] pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[   15.816246] pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
[   15.823037] pnp: 00:02: ioport range 0x400-0x47f has been reserved
[   15.829216] pnp: 00:02: ioport range 0x500-0x50f has been reserved
[   15.865864] PCI: Bridge: 0000:00:01.0
[   15.869533]   IO window: e000-efff
[   15.872941]   MEM window: fde00000-fdefffff
[   15.877126]   PREFETCH window: fdd00000-fddfffff
[   15.881764] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   15.881831] NET: Registered protocol family 2
[   15.923781] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   15.931174] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   15.940310] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[   15.947441] TCP: Hash tables configured (established 131072 bind 65536)
[   15.954072] TCP reno registered
[   15.968368] Total HugeTLB memory allocated, 0
[   15.972853] VFS: Disk quotas dquot_6.5.1
[   15.976796] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   15.983544] io scheduler noop registered
[   15.987468] io scheduler anticipatory registered
[   15.992082] io scheduler deadline registered
[   15.996376] io scheduler cfq registered (default)
[   16.001095] PCI: VIA PCI bridge detected. Disabling DAC.
[   16.163498] 0000:00:10.4 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
[   16.170202] PCI: Bypassing VIA 8237 APIC De-Assert Message
[   16.176025] input: Power Button (FF) as /devices/virtual/input/input0
[   16.182469] ACPI: Power Button (FF) [PWRF]
[   16.186687] input: Power Button (CM) as /devices/virtual/input/input1
[   16.193123] ACPI: Power Button (CM) [PWRB]
[   16.197298] ACPI: Fan [FAN] (on)
[   16.200826] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   16.206458] ACPI: Processor [CPU0] (supports 2 throttling states)
[   16.213644] ACPI: Thermal Zone [THRM] (40 C)
[   16.283093] Real Time Clock Driver v1.12ac
[   16.287378] Non-volatile memory driver v1.2
[   16.291593] VIA RNG detected
[   16.294522] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
[   16.303473] Hangcheck: Using get_cycles().
[   16.307589] Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
[   16.315427] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   16.321699] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   16.328320] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   16.334423] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   16.340612] loop: module loaded
[   16.343932] PPP generic driver version 2.4.2
[   16.348294] PPP Deflate Compression module registered
[   16.353361] PPP BSD Compression module registered
[   16.358151] PPP MPPE Compression module registered
[   16.363048] r8169 Gigabit Ethernet driver 2.2LK loaded
[   16.369027] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[   16.374776] PCI: setting IRQ 10 as level-triggered
[   16.374784] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[   16.383840] eth0: RTL8169sc/8110sc at 0xc080e000, 00:30:18:b0:25:c2, XID 18000000 IRQ 10
[   16.392591] r8169 Gigabit Ethernet driver 2.2LK loaded
[   16.398497] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[   16.404246] PCI: setting IRQ 11 as level-triggered
[   16.404254] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[   16.413265] eth1: RTL8169sc/8110sc at 0xc0810000, 00:30:18:b0:25:c3, XID 18000000 IRQ 11
[   16.422037] netconsole: device eth0 not up yet, forcing it
[   16.427846] r8169: eth0: link down
[   19.176561] r8169: eth0: link up
[   19.194082] console [netcon0] enabled
[   20.216942] netconsole: network logging started
[   20.221483] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   20.227843] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   20.235979] VP_IDE: IDE controller at PCI slot 0000:00:0f.0
[   20.242323] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 7
[   20.247995] PCI: setting IRQ 7 as level-triggered
[   20.248003] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7
[   20.256586] PCI: VIA VLink IRQ fixup for 0000:00:0f.0, from 255 to 7
[   20.262973] VP_IDE: chipset revision 6
[   20.266733] VP_IDE: not 100% native mode: will probe irqs later
[   20.272666] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0
[   20.280158]     ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
[   20.287445] Probing IDE interface ide0...
[   20.325031] Marking TSC unstable due to: possible TSC halt in C2.
[   20.331123] Time: acpi_pm clocksource has been installed.
[   20.704825] hda: WDC WD1200VE-00KWT0, ATA DISK drive
[   21.380151] hda: host side 80-wire cable detection failed, limiting max speed to UDMA33
[   21.388161] hda: selected mode 0x42
[   21.388250] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   21.393056] hda: max request size: 512KiB
[   21.455752] hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(33)
[   21.464184] hda: cache flushes supported
[   21.468161]  hda: hda1
[   21.477250] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[   21.486028] ehci_hcd 0000:00:10.4: EHCI Host Controller
[   21.491351] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[   21.498815] ehci_hcd 0000:00:10.4: irq 10, io mem 0xfdffd000
[   21.504502] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   21.512249] usb usb1: configuration #1 chosen from 1 choice
[   21.517899] hub 1-0:1.0: USB hub found
[   21.521677] hub 1-0:1.0: 8 ports detected
[   21.628049] USB Universal Host Controller Interface driver v3.0
[   21.634108] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7
[   21.642712] uhci_hcd 0000:00:10.0: UHCI Host Controller
[   21.648005] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[   21.655433] uhci_hcd 0000:00:10.0: irq 7, io base 0x0000fe00
[   21.661353] usb usb2: configuration #1 chosen from 1 choice
[   21.667011] hub 2-0:1.0: USB hub found
[   21.670797] hub 2-0:1.0: 2 ports detected
[   21.775890] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7
[   21.784482] uhci_hcd 0000:00:10.1: UHCI Host Controller
[   21.789773] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[   21.797200] uhci_hcd 0000:00:10.1: irq 7, io base 0x0000fd00
[   21.803109] usb usb3: configuration #1 chosen from 1 choice
[   21.808762] hub 3-0:1.0: USB hub found
[   21.812536] hub 3-0:1.0: 2 ports detected
[   21.920560] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[   21.926345] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[   21.935107] PCI: VIA VLink IRQ fixup for 0000:00:10.2, from 5 to 11
[   21.941404] uhci_hcd 0000:00:10.2: UHCI Host Controller
[   21.946735] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[   21.954168] uhci_hcd 0000:00:10.2: irq 11, io base 0x0000fc00
[   21.960199] usb usb4: configuration #1 chosen from 1 choice
[   21.965859] hub 4-0:1.0: USB hub found
[   21.969637] hub 4-0:1.0: 2 ports detected
[   22.075619] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[   22.084399] PCI: VIA VLink IRQ fixup for 0000:00:10.3, from 5 to 11
[   22.090699] uhci_hcd 0000:00:10.3: UHCI Host Controller
[   22.095992] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[   22.103425] uhci_hcd 0000:00:10.3: irq 11, io base 0x0000fb00
[   22.109415] usb usb5: configuration #1 chosen from 1 choice
[   22.115071] hub 5-0:1.0: USB hub found
[   22.118846] hub 5-0:1.0: 2 ports detected
[   22.139375] usb 2-1: new full speed USB device using uhci_hcd and address 2
[   22.329683] usb 2-1: configuration #1 chosen from 1 choice
[   23.230391] usbcore: registered new interface driver usblp
[   23.235903] Initializing USB Mass Storage driver...
[   23.240875] usbcore: registered new interface driver usb-storage
[   23.246892] USB Mass Storage support registered.
[   23.251680] PNP: No PS/2 controller found. Probing ports directly.
[   23.506189] serio: i8042 KBD port at 0x60,0x64 irq 1
[   23.511290] mice: PS/2 mouse device common for all mice
[   23.516687] i2c /dev entries driver
[   23.520501] f71805f: Found F71805F/FG chip at 0x290, revision 19
[   23.918166] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
[   23.926741] padlock: Using VIA PadLock ACE for AES algorithm.
[   23.932501] padlock: Using VIA PadLock ACE for SHA1/SHA256 algorithms.
[   23.939102] Advanced Linux Sound Architecture Driver Version 1.0.14 (Fri Jul 20 09:12:58 2007 UTC).
[   23.948323] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[   23.957225] PCI: Setting latency timer of device 0000:00:11.5 to 64
[   24.471419] ALSA device list:
[   24.474442]   #0: VIA 8237 with ALC655 at 0xf400, irq 10
[   24.479813] Netfilter messages via NETLINK v0.30.
[   24.484642] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   24.490812] ctnetlink v0.93: registering with nfnetlink.
[   24.496178] IPv4 over IPv4 tunneling driver
[   24.500581] GRE over IPv4 tunneling driver
[   24.505138] ip_tables: (C) 2000-2006 Netfilter Core Team
[   24.510561] ClusterIP Version 0.8 loaded successfully
[   24.515629] TCP bic registered
[   24.518695] TCP cubic registered
[   24.521934] TCP westwood registered
[   24.525431] TCP highspeed registered
[   24.529001] TCP hybla registered
[   24.532243] TCP htcp registered
[   24.535398] TCP vegas registered
[   24.538639] TCP veno registered
[   24.541790] TCP scalable registered
[   24.545287] TCP lp registered
[   24.548251] TCP yeah registered
[   24.551407] TCP illinois registered
[   24.554907] Initializing XFRM netlink socket
[   24.559235] NET: Registered protocol family 1
[   24.563686] NET: Registered protocol family 10
[   24.568252] lo: Disabled Privacy Extensions
[   24.572570] tunl0: Disabled Privacy Extensions
[   24.577102] Mobile IPv6
[   24.579595] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   24.585041] IPv6 over IPv4 tunneling driver
[   24.589473] sit0: Disabled Privacy Extensions
[   24.593998] NET: Registered protocol family 17
[   24.598469] NET: Registered protocol family 15
[   24.602979] Bridge firewalling registered
[   24.607005] Ebtables v2.0 registered
[   24.610618] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[   24.617408] All bugs added by David S. Miller <davem@redhat.com>
[   24.623704] CPU0 - ACPI performance management activated.
[   24.629116]      *P0: 1500 MHz, 15000 mW, 10 µs
[   24.633742]       P1: 800 MHz, 8000 mW, 10 µs
[   24.638582] Using IPI Shortcut mode
[   24.689701] kjournald starting.  Commit interval 5 seconds
[   24.695233] EXT3-fs: mounted filesystem with ordered data mode.
[   24.701177] VFS: Mounted root (ext3 filesystem) readonly.
[   24.706864] Freeing unused kernel memory: 184k freed
[   24.712029] Write protecting the kernel text: 2596k
[   24.716975] Write protecting the kernel read-only data: 926k

-- 
Simon Arlott

             reply	other threads:[~2007-11-22 19:47 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-11-22 19:47 Simon Arlott [this message]
2007-11-23  8:21 ` 2.6.23 WARNING: at kernel/softirq.c:139 local_bh_enable() Andrew Morton
2007-11-23 10:55   ` Evgeniy Polyakov
2007-11-23 17:07     ` Matt Mackall
2007-11-23 17:57       ` Evgeniy Polyakov
2007-11-23 18:48         ` Evgeniy Polyakov
2007-11-23 18:51           ` Evgeniy Polyakov
2007-11-23 18:59             ` Evgeniy Polyakov
2007-11-23 19:11               ` Matt Mackall
2007-11-23 19:32                 ` Evgeniy Polyakov
2007-11-23 19:41                   ` Matt Mackall
2007-11-23 19:54                     ` Evgeniy Polyakov
2007-11-23 20:07                       ` Evgeniy Polyakov
2007-11-23 20:09                       ` Matt Mackall
2007-11-24 18:19                 ` Matt Mackall
2007-11-23 18:59         ` Matt Mackall
2007-11-23 19:15           ` Evgeniy Polyakov
2007-11-23 19:20             ` Matt Mackall

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4745DCD7.8070805@simon.arlott.org.uk \
    --to=simon@fire.lp0.eu \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.