Re: [PATCH] ath5k: add debugfs entries for registers, tsf, beacon, reset

[Jiri Slaby <jirislaby@gmail.com>]

On 12/10/2007 10:27 AM, Bruno Randolf wrote:
 > 'registers' prints the name and value of some registers. this should be adapted
> to what we actually need later and is supposed to replace the hwdump facility i
> removed in my earlier debugging changes.
> 
> 'tsf' prints the current HW TSF. writing "reset" into the file will reset the
> TSF.
> 
> 'beacon' shows beacon relevant registers.  it is good for watching the beacon
> timers with something like "watch -n0 cat /dbg/ath5k/phy0/beacon". writing
> "enable" into the file will try to enable beacons by setting the flag
> AR5K_BEACON_ENABLE, "disable" will disable that bit.
> 
> 'reset' can be used to trigger a HW reset, by writing "reset" into it.
> 
> Changes-licensed-under: GPL
> 
> Signed-off-by: Bruno Randolf <bruno@thinktube.com>
> Acked-by: Luis R. Rodriguez <mgrof@winlab.rutgers.edu>

Acked-by: Jiri Slaby <jirislaby@gmail.com>

> ---
>  drivers/net/wireless/ath5k/debug.c |  269 ++++++++++++++++++++++++++++++++++++
>  drivers/net/wireless/ath5k/debug.h |    4 +
>  2 files changed, 273 insertions(+), 0 deletions(-)