All of lore.kernel.org
 help / color / mirror / Atom feed
From: Werner Goebl <werner.goebl@mail.mcgill.ca>
To: lm-sensors@vger.kernel.org
Subject: Re: [lm-sensors] dme1737 module
Date: Wed, 19 Dec 2007 19:21:24 +0000	[thread overview]
Message-ID: <47696F34.4080505@mail.mcgill.ca> (raw)
In-Reply-To: <191fb4ca0708220911q4affac9flb4bca592c3ba3850@mail.gmail.com>

Hi Juerg,

>> good point -- I relied on informations from the web about
>> the Q965 chipset, but I learned that I was wrong!
>>
>> So: I have a SMSC SCH5514D-NS chip (which is not on the list
>> unfortunately). I guess I am stuck now?
> 
> Good information, thanks. At least we can update sensors-detect to
> correctly identify your chip. Unfortunately, this being a Dell
> machine, SMSC won't provide technical information for this chip to me
> since I'm an HP person :-)

Ah, I didn't think of such things. I saw on the SMSC webpage 
that there is information only to a very limited number of 
chips.

> Let's try to figure out if it's compatible to any other supported SMSC
> chip before we give up. Can you run 'isadump -k 0x55 0x2e 0x2f 0xa'
> and post the output?

eh voila:
 > sudo isadump -k 0x55 0x2e 0x2f 0xa
WARNING! Running this program can cause system crashes, data 
loss and worse!
I will probe address register 0x2e and data register 0x2f.
Probing bank 10 using bank register 0x07.
Continue? [Y/n]
      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00: 00 00 00 00 00 00 00 0a 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 83 0f 38 00 04 00 2e 00 00 00 00 00 10 00 00 00
30: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 ff ff ff ff ff ff
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

All the best
Werner

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

  parent reply	other threads:[~2007-12-19 19:21 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-08-22 16:11 [lm-sensors] dme1737 module Juerg Haefliger
2007-08-27 20:48 ` Juergen.Bausa
2007-08-27 21:26 ` Juerg Haefliger
2007-08-27 22:56 ` Kushal Koolwal
2007-08-28  6:29 ` Juergen Bausa
2007-08-28 15:07 ` Juerg Haefliger
2007-09-02 12:57 ` Juergen Bausa
2007-09-02 17:47 ` Jean Delvare
2007-09-04 12:16 ` Juergen Bausa
2007-09-04 18:54 ` Juerg Haefliger
2007-09-04 19:07 ` Juerg Haefliger
2007-09-05 18:10 ` Juergen Bausa
2007-09-05 18:23 ` Juergen Bausa
2007-09-06  9:53 ` Jean Delvare
2007-09-06 19:20 ` Juergen Bausa
2007-09-07  3:01 ` Juerg Haefliger
2007-09-08 13:41 ` Juerg Haefliger
2007-09-09 15:20 ` Jean Delvare
2007-09-12 13:27 ` Juergen Bausa
2007-09-12 19:14 ` Juerg Haefliger
2007-09-12 21:56 ` Jean Delvare
2007-09-12 22:06 ` Juerg Haefliger
2007-09-13 20:54 ` Juergen Bausa
2007-09-14  3:37 ` Juerg Haefliger
2007-10-01 18:45 ` Juerg Haefliger
2007-12-16 22:41 ` Werner Goebl
2007-12-17 19:14 ` Juerg Haefliger
2007-12-19 17:38 ` Juerg Haefliger
2007-12-19 19:21 ` Werner Goebl [this message]
2007-12-19 19:23 ` Juerg Haefliger
2007-12-19 20:34 ` Werner Goebl
2007-12-19 21:08 ` Juerg Haefliger
2007-12-19 21:26 ` Werner Goebl
2007-12-19 22:04 ` Juerg Haefliger
2007-12-19 22:24 ` Werner Goebl
2007-12-19 22:43 ` Juerg Haefliger
2007-12-19 23:26 ` Werner Goebl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=47696F34.4080505@mail.mcgill.ca \
    --to=werner.goebl@mail.mcgill.ca \
    --cc=lm-sensors@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.