Re: [PATCH v2 02/17] media: i2c: imx290: Factor out subdev init and cleanup to functions

[Alexander Stein <alexander.stein@ew.tq-group.com>]

Hello Laurent,

thanks for the update.

Am Samstag, 14. Januar 2023, 18:17:47 CET schrieb Laurent Pinchart:
> The probe() function is large. Make it more readable by factoring the
> subdev initialization code out. While at it, rename the error labels as
> the "free_" prefix isn't accurate.
> 
> No functional change intended.
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> Changes since v1:
> 
> - Free control handler in imx290_subdev_init() error path

Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>

> ---
>  drivers/media/i2c/imx290.c | 108 +++++++++++++++++++++----------------
>  1 file changed, 62 insertions(+), 46 deletions(-)
> 
> diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
> index ca2fa57c28fe..5529bd39238f 100644
> --- a/drivers/media/i2c/imx290.c
> +++ b/drivers/media/i2c/imx290.c
> @@ -1015,6 +1015,47 @@ static const struct media_entity_operations
> imx290_subdev_entity_ops = { .link_validate = v4l2_subdev_link_validate,
>  };
> 
> +static int imx290_subdev_init(struct imx290 *imx290)
> +{
> +	struct i2c_client *client = to_i2c_client(imx290->dev);
> +	int ret;
> +
> +	/*
> +	 * Initialize the frame format. In particular, imx290->current_mode
> +	 * and imx290->bpp are set to defaults: imx290_calc_pixel_rate() 
call
> +	 * below relies on these fields.
> +	 */
> +	imx290_entity_init_cfg(&imx290->sd, NULL);
> +
> +	ret = imx290_ctrl_init(imx290);
> +	if (ret < 0) {
> +		dev_err(imx290->dev, "Control initialization error %d\n", 
ret);
> +		return ret;
> +	}
> +
> +	v4l2_i2c_subdev_init(&imx290->sd, client, &imx290_subdev_ops);
> +	imx290->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> +	imx290->sd.dev = imx290->dev;
> +	imx290->sd.entity.ops = &imx290_subdev_entity_ops;
> +	imx290->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> +
> +	imx290->pad.flags = MEDIA_PAD_FL_SOURCE;
> +	ret = media_entity_pads_init(&imx290->sd.entity, 1, &imx290->pad);
> +	if (ret < 0) {
> +		dev_err(imx290->dev, "Could not register media entity\n");
> +		v4l2_ctrl_handler_free(&imx290->ctrls);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static void imx290_subdev_cleanup(struct imx290 *imx290)
> +{
> +	media_entity_cleanup(&imx290->sd.entity);
> +	v4l2_ctrl_handler_free(&imx290->ctrls);
> +}
> +
>  /*
> ---------------------------------------------------------------------------
> - * Power management
>   */
> @@ -1147,10 +1188,10 @@ static int imx290_probe(struct i2c_client *client)
>  	fwnode_handle_put(endpoint);
>  	if (ret == -ENXIO) {
>  		dev_err(dev, "Unsupported bus type, should be CSI2\n");
> -		goto free_err;
> +		goto err_endpoint;
>  	} else if (ret) {
>  		dev_err(dev, "Parsing endpoint node failed\n");
> -		goto free_err;
> +		goto err_endpoint;
>  	}
> 
>  	/* Get number of data lanes */
> @@ -1158,7 +1199,7 @@ static int imx290_probe(struct i2c_client *client)
>  	if (imx290->nlanes != 2 && imx290->nlanes != 4) {
>  		dev_err(dev, "Invalid data lanes: %d\n", imx290->nlanes);
>  		ret = -EINVAL;
> -		goto free_err;
> +		goto err_endpoint;
>  	}
> 
>  	dev_dbg(dev, "Using %u data lanes\n", imx290->nlanes);
> @@ -1166,7 +1207,7 @@ static int imx290_probe(struct i2c_client *client)
>  	if (!ep.nr_of_link_frequencies) {
>  		dev_err(dev, "link-frequency property not found in DT\n");
>  		ret = -EINVAL;
> -		goto free_err;
> +		goto err_endpoint;
>  	}
> 
>  	/* Check that link frequences for all the modes are in device tree 
*/
> @@ -1174,7 +1215,7 @@ static int imx290_probe(struct i2c_client *client)
>  	if (fq) {
>  		dev_err(dev, "Link frequency of %lld is not supported\n", 
fq);
>  		ret = -EINVAL;
> -		goto free_err;
> +		goto err_endpoint;
>  	}
> 
>  	/* get system clock (xclk) */
> @@ -1182,14 +1223,14 @@ static int imx290_probe(struct i2c_client *client)
>  	if (IS_ERR(imx290->xclk)) {
>  		dev_err(dev, "Could not get xclk");
>  		ret = PTR_ERR(imx290->xclk);
> -		goto free_err;
> +		goto err_endpoint;
>  	}
> 
>  	ret = fwnode_property_read_u32(dev_fwnode(dev), "clock-frequency",
>  				       &xclk_freq);
>  	if (ret) {
>  		dev_err(dev, "Could not get xclk frequency\n");
> -		goto free_err;
> +		goto err_endpoint;
>  	}
> 
>  	/* external clock must be 37.125 MHz */
> @@ -1197,19 +1238,19 @@ static int imx290_probe(struct i2c_client *client)
>  		dev_err(dev, "External clock frequency %u is not 
supported\n",
>  			xclk_freq);
>  		ret = -EINVAL;
> -		goto free_err;
> +		goto err_endpoint;
>  	}
> 
>  	ret = clk_set_rate(imx290->xclk, xclk_freq);
>  	if (ret) {
>  		dev_err(dev, "Could not set xclk frequency\n");
> -		goto free_err;
> +		goto err_endpoint;
>  	}
> 
>  	ret = imx290_get_regulators(dev, imx290);
>  	if (ret < 0) {
>  		dev_err(dev, "Cannot get regulators\n");
> -		goto free_err;
> +		goto err_endpoint;
>  	}
> 
>  	imx290->rst_gpio = devm_gpiod_get_optional(dev, "reset",
> @@ -1217,48 +1258,26 @@ static int imx290_probe(struct i2c_client *client)
>  	if (IS_ERR(imx290->rst_gpio)) {
>  		dev_err(dev, "Cannot get reset gpio\n");
>  		ret = PTR_ERR(imx290->rst_gpio);
> -		goto free_err;
> +		goto err_endpoint;
>  	}
> 
>  	mutex_init(&imx290->lock);
> 
> -	/*
> -	 * Initialize the frame format. In particular, imx290->current_mode
> -	 * and imx290->bpp are set to defaults: imx290_calc_pixel_rate() 
call
> -	 * below relies on these fields.
> -	 */
> -	imx290_entity_init_cfg(&imx290->sd, NULL);
> -
> -	ret = imx290_ctrl_init(imx290);
> -	if (ret < 0) {
> -		dev_err(dev, "Control initialization error %d\n", ret);
> -		goto free_mutex;
> -	}
> -
> -	v4l2_i2c_subdev_init(&imx290->sd, client, &imx290_subdev_ops);
> -	imx290->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> -	imx290->sd.dev = &client->dev;
> -	imx290->sd.entity.ops = &imx290_subdev_entity_ops;
> -	imx290->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> -
> -	imx290->pad.flags = MEDIA_PAD_FL_SOURCE;
> -	ret = media_entity_pads_init(&imx290->sd.entity, 1, &imx290->pad);
> -	if (ret < 0) {
> -		dev_err(dev, "Could not register media entity\n");
> -		goto free_ctrl;
> -	}
> +	ret = imx290_subdev_init(imx290);
> +	if (ret)
> +		goto err_mutex;
> 
>  	ret = v4l2_async_register_subdev(&imx290->sd);
>  	if (ret < 0) {
>  		dev_err(dev, "Could not register v4l2 device\n");
> -		goto free_entity;
> +		goto err_subdev;
>  	}
> 
>  	/* Power on the device to match runtime PM state below */
>  	ret = imx290_power_on(dev);
>  	if (ret < 0) {
>  		dev_err(dev, "Could not power on the device\n");
> -		goto free_entity;
> +		goto err_subdev;
>  	}
> 
>  	pm_runtime_set_active(dev);
> @@ -1269,13 +1288,11 @@ static int imx290_probe(struct i2c_client *client)
> 
>  	return 0;
> 
> -free_entity:
> -	media_entity_cleanup(&imx290->sd.entity);
> -free_ctrl:
> -	v4l2_ctrl_handler_free(&imx290->ctrls);
> -free_mutex:
> +err_subdev:
> +	imx290_subdev_cleanup(imx290);
> +err_mutex:
>  	mutex_destroy(&imx290->lock);
> -free_err:
> +err_endpoint:
>  	v4l2_fwnode_endpoint_free(&ep);
> 
>  	return ret;
> @@ -1287,8 +1304,7 @@ static void imx290_remove(struct i2c_client *client)
>  	struct imx290 *imx290 = to_imx290(sd);
> 
>  	v4l2_async_unregister_subdev(sd);
> -	media_entity_cleanup(&sd->entity);
> -	v4l2_ctrl_handler_free(sd->ctrl_handler);
> +	imx290_subdev_cleanup(imx290);
> 
>  	mutex_destroy(&imx290->lock);