* [U-Boot-Users] [PATCH 3/4] PPC4xx: Use common code for LWMON5 board SDRAM support
@ 2007-12-30 6:01 Larry Johnson
0 siblings, 0 replies; only message in thread
From: Larry Johnson @ 2007-12-30 6:01 UTC (permalink / raw)
To: u-boot
This patch also modifies the functionality of the code so that the data-eye
search is now done with with the cache disabled.
Signed-off-by: Larry Johnson <lrj@acm.org>
---
diff --git a/board/lwmon5/sdram.c b/board/lwmon5/sdram.c
index 399da8a..affaeff 100644
--- a/board/lwmon5/sdram.c
+++ b/board/lwmon5/sdram.c
@@ -36,8 +36,6 @@
#include <asm/io.h>
#include <ppc440.h>
-#include "sdram.h"
-
/*
* This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
* region. Right now the cache should still be disabled in U-Boot because of the
@@ -54,8 +52,13 @@
#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */
#endif
-void dcbz_area(u32 start_address, u32 num_bytes);
-void dflush(void);
+/*-----------------------------------------------------------------------------+
+ * Prototypes
+ *-----------------------------------------------------------------------------*/
+extern int denali_wait_for_dlllock(void);
+extern void denali_core_search_data_eye(void);
+extern void dcbz_area(u32 start_address, u32 num_bytes);
+extern void dflush(void);
static u32 is_ecc_enabled(void)
{
@@ -87,330 +90,6 @@ void board_add_ram_info(int use_default)
printf(", CL%d)", val);
}
-static int wait_for_dlllock(void)
-{
- u32 val;
- int wait = 0;
-
- /*
- * Wait for the DCC master delay line to finish calibration
- */
- mtdcr(ddrcfga, DDR0_17);
- val = DDR0_17_DLLLOCKREG_UNLOCKED;
-
- while (wait != 0xffff) {
- val = mfdcr(ddrcfgd);
- if ((val & DDR0_17_DLLLOCKREG_MASK) == DDR0_17_DLLLOCKREG_LOCKED)
- /* dlllockreg bit on */
- return 0;
- else
- wait++;
- }
- debug("0x%04x: DDR0_17 Value (dlllockreg bit): 0x%08x\n", wait, val);
- debug("Waiting for dlllockreg bit to raise\n");
-
- return -1;
-}
-
-#if defined(CONFIG_DDR_DATA_EYE)
-int wait_for_dram_init_complete(void)
-{
- u32 val;
- int wait = 0;
-
- /*
- * Wait for 'DRAM initialization complete' bit in status register
- */
- mtdcr(ddrcfga, DDR0_00);
-
- while (wait != 0xffff) {
- val = mfdcr(ddrcfgd);
- if ((val & DDR0_00_INT_STATUS_BIT6) == DDR0_00_INT_STATUS_BIT6)
- /* 'DRAM initialization complete' bit */
- return 0;
- else
- wait++;
- }
-
- debug("DRAM initialization complete bit in status register did not rise\n");
-
- return -1;
-}
-
-#define NUM_TRIES 64
-#define NUM_READS 10
-
-void denali_core_search_data_eye(u32 start_addr, u32 memory_size)
-{
- int k, j;
- u32 val;
- u32 wr_dqs_shift, dqs_out_shift, dll_dqs_delay_X;
- u32 max_passing_cases = 0, wr_dqs_shift_with_max_passing_cases = 0;
- u32 passing_cases = 0, dll_dqs_delay_X_sw_val = 0;
- u32 dll_dqs_delay_X_start_window = 0, dll_dqs_delay_X_end_window = 0;
- volatile u32 *ram_pointer;
- u32 test[NUM_TRIES] = {
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
-
- ram_pointer = (volatile u32 *)start_addr;
-
- for (wr_dqs_shift = 64; wr_dqs_shift < 96; wr_dqs_shift++) {
- /*for (wr_dqs_shift=1; wr_dqs_shift<96; wr_dqs_shift++) {*/
-
- /*
- * De-assert 'start' parameter.
- */
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
- mtdcr(ddrcfgd, val);
-
- /*
- * Set 'wr_dqs_shift'
- */
- mtdcr(ddrcfga, DDR0_09);
- val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
- | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
- mtdcr(ddrcfgd, val);
-
- /*
- * Set 'dqs_out_shift' = wr_dqs_shift + 32
- */
- dqs_out_shift = wr_dqs_shift + 32;
- mtdcr(ddrcfga, DDR0_22);
- val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
- | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
- mtdcr(ddrcfgd, val);
-
- passing_cases = 0;
-
- for (dll_dqs_delay_X = 1; dll_dqs_delay_X < 64; dll_dqs_delay_X++) {
- /*for (dll_dqs_delay_X=1; dll_dqs_delay_X<128; dll_dqs_delay_X++) {*/
- /*
- * Set 'dll_dqs_delay_X'.
- */
- /* dll_dqs_delay_0 */
- mtdcr(ddrcfga, DDR0_17);
- val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
- | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- /* dll_dqs_delay_1 to dll_dqs_delay_4 */
- mtdcr(ddrcfga, DDR0_18);
- val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
- | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- /* dll_dqs_delay_5 to dll_dqs_delay_8 */
- mtdcr(ddrcfga, DDR0_19);
- val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
- | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
-
- ppcMsync();
- ppcMbar();
-
- /*
- * Assert 'start' parameter.
- */
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
- mtdcr(ddrcfgd, val);
-
- ppcMsync();
- ppcMbar();
-
- /*
- * Wait for the DCC master delay line to finish calibration
- */
- if (wait_for_dlllock() != 0) {
- printf("dlllock did not occur !!!\n");
- printf("denali_core_search_data_eye!!!\n");
- printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
- wr_dqs_shift, dll_dqs_delay_X);
- hang();
- }
- ppcMsync();
- ppcMbar();
-
- if (wait_for_dram_init_complete() != 0) {
- printf("dram init complete did not occur !!!\n");
- printf("denali_core_search_data_eye!!!\n");
- printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n",
- wr_dqs_shift, dll_dqs_delay_X);
- hang();
- }
- udelay(100); /* wait 100us to ensure init is really completed !!! */
-
- /* write values */
- for (j=0; j<NUM_TRIES; j++) {
- ram_pointer[j] = test[j];
-
- /* clear any cache at ram location */
- __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
- }
-
- /* read values back */
- for (j=0; j<NUM_TRIES; j++) {
- for (k=0; k<NUM_READS; k++) {
- /* clear any cache@ram location */
- __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
-
- if (ram_pointer[j] != test[j])
- break;
- }
-
- /* read error */
- if (k != NUM_READS)
- break;
- }
-
- /* See if the dll_dqs_delay_X value passed.*/
- if (j < NUM_TRIES) {
- /* Failed */
- passing_cases = 0;
- /* break; */
- } else {
- /* Passed */
- if (passing_cases == 0)
- dll_dqs_delay_X_sw_val = dll_dqs_delay_X;
- passing_cases++;
- if (passing_cases >= max_passing_cases) {
- max_passing_cases = passing_cases;
- wr_dqs_shift_with_max_passing_cases = wr_dqs_shift;
- dll_dqs_delay_X_start_window = dll_dqs_delay_X_sw_val;
- dll_dqs_delay_X_end_window = dll_dqs_delay_X;
- }
- }
-
- /*
- * De-assert 'start' parameter.
- */
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
- mtdcr(ddrcfgd, val);
-
- } /* for (dll_dqs_delay_X=0; dll_dqs_delay_X<128; dll_dqs_delay_X++) */
-
- } /* for (wr_dqs_shift=0; wr_dqs_shift<96; wr_dqs_shift++) */
-
- /*
- * Largest passing window is now detected.
- */
-
- /* Compute dll_dqs_delay_X value */
- dll_dqs_delay_X = (dll_dqs_delay_X_end_window + dll_dqs_delay_X_start_window) / 2;
- wr_dqs_shift = wr_dqs_shift_with_max_passing_cases;
-
- debug("DQS calibration - Window detected:\n");
- debug("max_passing_cases = %d\n", max_passing_cases);
- debug("wr_dqs_shift = %d\n", wr_dqs_shift);
- debug("dll_dqs_delay_X = %d\n", dll_dqs_delay_X);
- debug("dll_dqs_delay_X window = %d - %d\n",
- dll_dqs_delay_X_start_window, dll_dqs_delay_X_end_window);
-
- /*
- * De-assert 'start' parameter.
- */
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
- mtdcr(ddrcfgd, val);
-
- /*
- * Set 'wr_dqs_shift'
- */
- mtdcr(ddrcfga, DDR0_09);
- val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
- | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
- mtdcr(ddrcfgd, val);
- debug("DDR0_09=0x%08lx\n", val);
-
- /*
- * Set 'dqs_out_shift' = wr_dqs_shift + 32
- */
- dqs_out_shift = wr_dqs_shift + 32;
- mtdcr(ddrcfga, DDR0_22);
- val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
- | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
- mtdcr(ddrcfgd, val);
- debug("DDR0_22=0x%08lx\n", val);
-
- /*
- * Set 'dll_dqs_delay_X'.
- */
- /* dll_dqs_delay_0 */
- mtdcr(ddrcfga, DDR0_17);
- val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
- | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- debug("DDR0_17=0x%08lx\n", val);
-
- /* dll_dqs_delay_1 to dll_dqs_delay_4 */
- mtdcr(ddrcfga, DDR0_18);
- val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
- | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- debug("DDR0_18=0x%08lx\n", val);
-
- /* dll_dqs_delay_5 to dll_dqs_delay_8 */
- mtdcr(ddrcfga, DDR0_19);
- val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
- | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- debug("DDR0_19=0x%08lx\n", val);
-
- /*
- * Assert 'start' parameter.
- */
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
- mtdcr(ddrcfgd, val);
-
- ppcMsync();
- ppcMbar();
-
- /*
- * Wait for the DCC master delay line to finish calibration
- */
- if (wait_for_dlllock() != 0) {
- printf("dlllock did not occur !!!\n");
- hang();
- }
- ppcMsync();
- ppcMbar();
-
- if (wait_for_dram_init_complete() != 0) {
- printf("dram init complete did not occur !!!\n");
- hang();
- }
- udelay(100); /* wait 100us to ensure init is really completed !!! */
-}
-#endif /* CONFIG_DDR_DATA_EYE */
-
#ifdef CONFIG_DDR_ECC
static void wait_ddr_idle(void)
{
@@ -610,12 +289,23 @@ long int initdram (int board_type)
mtsdram(DDR0_02, 0x00000001); /* Activate the denali core */
#endif
- wait_for_dlllock();
+ denali_wait_for_dlllock();
+
+#if defined(CONFIG_DDR_DATA_EYE)
+ /* -----------------------------------------------------------+
+ * Perform data eye search if requested.
+ * ----------------------------------------------------------*/
+ program_tlb(0, CFG_SDRAM_BASE, CFG_MBYTES_SDRAM << 20,
+ TLB_WORD2_I_ENABLE);
+ denali_core_search_data_eye();
+ remove_tlb(CFG_SDRAM_BASE, CFG_MBYTES_SDRAM << 20);
+#endif
/*
* Program tlb entries for this size (dynamic)
*/
- program_tlb(0, 0, CFG_MBYTES_SDRAM << 20, MY_TLB_WORD2_I_ENABLE);
+ program_tlb(0, CFG_SDRAM_BASE, CFG_MBYTES_SDRAM << 20,
+ MY_TLB_WORD2_I_ENABLE);
/*
* Setup 2nd TLB with same physical address but different virtual address
@@ -623,13 +313,6 @@ long int initdram (int board_type)
*/
program_tlb(0, CFG_DDR_CACHED_ADDR, CFG_MBYTES_SDRAM << 20, 0);
-#ifdef CONFIG_DDR_DATA_EYE
- /*
- * Perform data eye search if requested.
- */
- denali_core_search_data_eye(CFG_DDR_CACHED_ADDR, CFG_MBYTES_SDRAM << 20);
-#endif
-
#ifdef CONFIG_DDR_ECC
/*
* If ECC is enabled, initialize the parity bits.
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2007-12-30 6:01 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-12-30 6:01 [U-Boot-Users] [PATCH 3/4] PPC4xx: Use common code for LWMON5 board SDRAM support Larry Johnson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.