[Qemu-devel] [PATCH 3/9] LPC device

[Qemu-devel] [PATCH 3/9] LPC device

[Alexander Graf]

[-- Attachment #1: Type: text/plain, Size: 185 bytes --]

The LPC is the "Low Pin Control", the reincanation of the
"PCI-ISA-Bridge". As all Intel Macs have at least an ICH7 chipset, this
bridge is required to exist and hosts the HPET device.

[-- Attachment #2: qemu-lpc.patch --]
[-- Type: text/x-patch, Size: 5808 bytes --]

Index: qemu-snapshot-2008-01-08_05/Makefile.target
===================================================================
--- qemu-snapshot-2008-01-08_05.orig/Makefile.target
+++ qemu-snapshot-2008-01-08_05/Makefile.target
@@ -441,7 +441,7 @@ ifeq ($(TARGET_BASE_ARCH), i386)
 VL_OBJS+= ide.o pckbd.o ps2.o vga.o $(SOUND_HW) dma.o
 VL_OBJS+= fdc.o mc146818rtc.o serial.o i8259.o i8254.o pcspk.o pc.o
 VL_OBJS+= cirrus_vga.o apic.o parallel.o acpi.o piix_pci.o
-VL_OBJS+= usb-uhci.o vmmouse.o vmport.o vmware_vga.o smbios.o hpet.o
+VL_OBJS+= usb-uhci.o vmmouse.o vmport.o vmware_vga.o smbios.o hpet.o lpc.o
 CPPFLAGS += -DHAS_AUDIO -DHAS_AUDIO_CHOICE
 endif
 ifeq ($(TARGET_BASE_ARCH), ppc)
Index: qemu-snapshot-2008-01-08_05/hw/lpc.c
===================================================================
--- /dev/null
+++ qemu-snapshot-2008-01-08_05/hw/lpc.c
@@ -0,0 +1,154 @@
+/*
+ *  Low Pin Count emulation
+ *
+ *  Copyright (c) 2007 Alexander Graf
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * *****************************************************************
+ *
+ * This driver emulates an ICH-7 LPC partially. The LPC is basically the
+ * same as the ISA-bridge in the existing PIIX implementation, but
+ * more recent and includes support for HPET and Power Management.
+ *
+ */
+#include "hw.h"
+#include "pci.h"
+#include "console.h"
+
+#define RCBA_BASE		0xFED1C000
+
+void hpet_init(qemu_irq irq);
+
+static uint32_t rcba_ram_readl(void *opaque, target_phys_addr_t addr)
+{
+    printf("qemu: rcba_read l at %#lx\n", addr);
+    if(addr == RCBA_BASE + 0x3404) { /* This is the HPET config pointer */
+        printf("qemu: rcba_read HPET_CONFIG_POINTER\n");
+        return 0xf0; // enabled at 0xfed00000
+    } else if(addr == RCBA_BASE + 0x3410) { /* This is the HPET config pointer */
+        printf("qemu: rcba_read GCS\n");
+        return 0;
+    } else {
+        return 0x0;
+    }
+}
+
+static void rcba_ram_writel(void *opaque, target_phys_addr_t addr,
+                uint32_t value)
+{
+    printf("qemu: rcba_write l %#lx = %#x\n", addr, value);
+}
+
+static CPUReadMemoryFunc *rcba_ram_read[] = {
+    NULL,
+    NULL,
+    rcba_ram_readl,
+};
+
+static CPUWriteMemoryFunc *rcba_ram_write[] = {
+    NULL,
+    NULL,
+    rcba_ram_writel,
+};
+
+void lpc_init(PCIBus *bus, int devfn, qemu_irq *pic) {
+    int iomemtype;
+    uint8_t *pci_conf;
+    PCIDevice *d;
+
+    /* register a function 1 of PIIX3 */
+    d = (PCIDevice *)pci_register_device(bus, "LPC",
+                                           sizeof(PCIDevice),
+                                           31 << 3,
+                                           NULL, NULL);
+    pci_conf = d->config;
+    pci_conf[0x00] = 0x86;
+    pci_conf[0x01] = 0x80;
+    pci_conf[0x02] = 0xb9;
+    pci_conf[0x03] = 0x27;
+    pci_conf[0x08] = 0x02; // Revision 2
+
+    pci_conf[0x0a] = 0x01; // PCI-to-ISA Bridge
+    pci_conf[0x0b] = 0x06; // Bridge
+
+    pci_conf[0x0e] = 0xf0;
+
+    // Subsystem
+    pci_conf[0x2c] = 0x86;
+    pci_conf[0x2d] = 0x80;
+    pci_conf[0x2e] = 0x70;
+    pci_conf[0x2f] = 0x72;
+
+    pci_conf[0x3d] = 0x03;
+
+    // PMBASE
+    pci_conf[0x40] = 0x80;
+    pci_conf[0x41] = 0x06;
+
+    pci_conf[0xf0] = RCBA_BASE | 1; // enabled
+    pci_conf[0xf1] = RCBA_BASE << 8;
+    pci_conf[0xf2] = RCBA_BASE << 16;
+    pci_conf[0xf3] = RCBA_BASE << 24;
+
+
+    /* RCBA Area */
+
+    iomemtype = cpu_register_io_memory(0, rcba_ram_read,
+                    rcba_ram_write, d);
+
+    cpu_register_physical_memory(RCBA_BASE, 0x4000, iomemtype);
+#if 0
+    cpu_register_physical_memory(0x00CDA000, 0x4000, iomemtype);
+#endif
+
+
+
+    pci_conf[0x04] = 0x07; // master, memory and I/O
+    pci_conf[0x05] = 0x00;
+    pci_conf[0x06] = 0x00;
+    pci_conf[0x07] = 0x02; // PCI_status_devsel_medium
+    pci_conf[0x4c] = 0x4d;
+    pci_conf[0x4e] = 0x03;
+    pci_conf[0x4f] = 0x00;
+    pci_conf[0x60] = 0x0a; // PCI A -> IRQ 10
+    pci_conf[0x61] = 0x0a; // PCI B -> IRQ 10
+    pci_conf[0x62] = 0x0b; // PCI C -> IRQ 11
+    pci_conf[0x63] = 0x0b; // PCI D -> IRQ 11
+    pci_conf[0x69] = 0x02;
+    pci_conf[0x70] = 0x80;
+    pci_conf[0x76] = 0x0c;
+    pci_conf[0x77] = 0x0c;
+    pci_conf[0x78] = 0x02;
+    pci_conf[0x79] = 0x00;
+    pci_conf[0x80] = 0x00;
+    pci_conf[0x82] = 0x00;
+    pci_conf[0xa0] = 0x08;
+    pci_conf[0xa2] = 0x00;
+    pci_conf[0xa3] = 0x00;
+    pci_conf[0xa4] = 0x00;
+    pci_conf[0xa5] = 0x00;
+    pci_conf[0xa6] = 0x00;
+    pci_conf[0xa7] = 0x00;
+    pci_conf[0xa8] = 0x0f;
+    pci_conf[0xaa] = 0x00;
+    pci_conf[0xab] = 0x00;
+    pci_conf[0xac] = 0x00;
+    pci_conf[0xae] = 0x00;
+
+// XXX hpet goes via apic
+    hpet_init(pic[0]);
+}
+
Index: qemu-snapshot-2008-01-08_05/hw/pc.h
===================================================================
--- qemu-snapshot-2008-01-08_05.orig/hw/pc.h
+++ qemu-snapshot-2008-01-08_05/hw/pc.h
@@ -142,4 +142,7 @@ void pci_piix4_ide_init(PCIBus *bus, Blo
 
 void isa_ne2000_init(int base, qemu_irq irq, NICInfo *nd);
 
+/* lpc.c */
+void lpc_init(PCIBus *bus, int devfn, qemu_irq *pic);
+
 #endif