From: Mark Lord <liml@rtr.ca>
To: Tejun Heo <htejun@gmail.com>,
IDE/ATA development list <linux-ide@vger.kernel.org>
Subject: WARNING: at drivers/ata/libata-core.c:5988 ata_qc_issue()
Date: Thu, 24 Jan 2008 10:20:44 -0500 [thread overview]
Message-ID: <4798ACCC.3040104@rtr.ca> (raw)
Tejun,
During testing with NCQ on sata_mv (patches coming shortly),
I found this gem in the syslog. This doesn't look like something
that a LLD could cause, but rather a race perhaps in libata-core.
System is a 2.4GHz 32-bit Core2Quad, 2GB RAM (during this test),
running 2.6.24-rc6-git12 + newer sata_mv, with two sata_mv controller
cards, each with one NCQ drive performing heavy R/W activity.
Other than that, I'm not sure what triggered this.
[ 265.473596] EXT3-fs: mounted filesystem with ordered data mode.
[ 289.892890] WARNING: at drivers/ata/libata-core.c:5988 ata_qc_issue()
[ 289.892898] Pid: 4661, comm: mirrordir Not tainted 2.6.24-rc6-git12 #7
[ 289.892911] [ata_qc_issue+88/1512] ata_qc_issue+0x58/0x5e8
[ 289.892922] [scsi_get_cmd_from_req+23/51] scsi_get_cmd_from_req+0x17/0x33
[ 289.892934] [scsi_done+0/22] scsi_done+0x0/0x16
[ 289.892939] [ata_scsi_translate+233/272] ata_scsi_translate+0xe9/0x110
[ 289.892949] [scsi_done+0/22] scsi_done+0x0/0x16
[ 289.892954] [ata_scsi_queuecmd+412/443] ata_scsi_queuecmd+0x19c/0x1bb
[ 289.892960] [ata_scsi_rw_xlat+0/478] ata_scsi_rw_xlat+0x0/0x1de
[ 289.892968] [scsi_dispatch_cmd+422/547] scsi_dispatch_cmd+0x1a6/0x223
[ 289.892976] [scsi_request_fn+631/814] scsi_request_fn+0x277/0x32e
[ 289.892982] [blk_remove_plug+79/91] blk_remove_plug+0x4f/0x5b
[ 289.892991] [__generic_unplug_device+29/31] __generic_unplug_device+0x1d/0x1f
[ 289.892998] [elv_insert+166/326] elv_insert+0xa6/0x146
[ 289.893006] [__make_request+993/1109] __make_request+0x3e1/0x455
[ 289.893012] [swsusp_show_speed+15/237] swsusp_show_speed+0xf/0xed
[ 289.893021] [generic_make_request+425/471] generic_make_request+0x1a9/0x1d7
[ 289.893028] [bio_add_page+49/55] bio_add_page+0x31/0x37
[ 289.893036] [do_mpage_readpage+947/1108] do_mpage_readpage+0x3b3/0x454
[ 289.893044] [submit_bio+237/244] submit_bio+0xed/0xf4
[ 289.893053] [add_to_page_cache+111/140] add_to_page_cache+0x6f/0x8c
[ 289.893061] [mpage_end_io_read+0/83] mpage_end_io_read+0x0/0x53
[ 289.893066] [mpage_bio_submit+25/29] mpage_bio_submit+0x19/0x1d
[ 289.893073] [mpage_readpages+177/188] mpage_readpages+0xb1/0xbc
[ 289.893080] [<f8f2cbba>] ext2_get_block+0x0/0x5d8 [ext2]
[ 289.893097] [<f8f2bf0c>] ext2_readpages+0x0/0x15 [ext2]
[ 289.893109] [__do_page_cache_readahead+319/446] __do_page_cache_readahead+0x13f/0x1be
[ 289.893115] [<f8f2cbba>] ext2_get_block+0x0/0x5d8 [ext2]
[ 289.893128] [page_cache_sync_readahead+42/47] page_cache_sync_readahead+0x2a/0x2f
[ 289.893136] [do_generic_mapping_read+221/936] do_generic_mapping_read+0xdd/0x3a8
[ 289.893143] [file_read_actor+0/204] file_read_actor+0x0/0xcc
[ 289.893153] [generic_file_aio_read+353/412] generic_file_aio_read+0x161/0x19c
[ 289.893160] [file_read_actor+0/204] file_read_actor+0x0/0xcc
[ 289.893170] [do_sync_read+199/266] do_sync_read+0xc7/0x10a
[ 289.893181] [autoremove_wake_function+0/53] autoremove_wake_function+0x0/0x35
[ 289.893195] [do_sync_read+0/266] do_sync_read+0x0/0x10a
[ 289.893201] [vfs_read+136/266] vfs_read+0x88/0x10a
[ 289.893207] [sys_read+65/103] sys_read+0x41/0x67
[ 289.893214] [sysenter_past_esp+95/133] sysenter_past_esp+0x5f/0x85
[ 289.893226] =======================
[ 319.846321] ata5.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x2 frozen
[ 319.846435] ata5.00: cmd 60/08:08:6f:20:0b/00:00:00:00:00/40 tag 1 ncq 4096 in
[ 319.846437] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 319.846542] ata5.00: status: { DRDY }
[ 319.846615] ata5: hard resetting link
[ 319.876280] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 320.029413] ata5.00: configured for UDMA/133
[ 320.029422] ata5: EH complete
next reply other threads:[~2008-01-24 15:20 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-24 15:20 Mark Lord [this message]
2008-01-24 15:26 ` WARNING: at drivers/ata/libata-core.c:5988 ata_qc_issue() Tejun Heo
2008-01-24 15:56 ` Mark Lord
2008-01-24 23:36 ` Tejun Heo
2008-01-24 23:52 ` Mark Lord
2008-01-24 23:57 ` Tejun Heo
2008-01-25 0:02 ` Mark Lord
2008-01-25 0:07 ` Tejun Heo
2008-01-25 4:01 ` Mark Lord
2008-01-25 4:08 ` Tejun Heo
2008-01-25 4:29 ` Mark Lord
2008-01-25 4:36 ` Tejun Heo
2008-01-25 7:20 ` Jeff Garzik
2008-01-25 7:18 ` Jeff Garzik
2008-01-25 15:01 ` James Bottomley
2008-01-25 15:18 ` Mark Lord
2008-01-25 15:29 ` James Bottomley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4798ACCC.3040104@rtr.ca \
--to=liml@rtr.ca \
--cc=htejun@gmail.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.