From: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
To: LKML <linux-kernel@vger.kernel.org>,
linux-ide@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>,
ananth@in.ibm.com, Andy Whitcroft <apw@shadowen.org>,
Balbir Singh <balbir@l>
Subject: [BUG] 2.6.24-mm1 and 2.6.24-git13 kernel panic's while bootup at ide_device_add_all
Date: Tue, 05 Feb 2008 13:33:49 +0530 [thread overview]
Message-ID: <47A81865.9000506@linux.vnet.ibm.com> (raw)
Hi,
The kernel bootup panics with the 2.6.24-mm1 and 2.6.24-git13 kernel
while defconfig compiled in for x86_64 (Intel(R) Xeon) box
BUG: unable to handle kernel paging request at ffffffffffffffb0
IP: [<ffffffff80413642>] init_irq+0x188/0x444
PGD 203067 PUD 204067 PMD 0
Oops: 0000 [1] SMP
CPU 2
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.24 #1
RIP: 0010:[<ffffffff80413642>] [<ffffffff80413642>] init_irq+0x188/0x444
RSP: 0018:ffff81022f093e00 EFLAGS: 00010287
RAX: ffffffffffffff90 RBX: ffffffff808a9100 RCX: 0000000000000000
RDX: 00000000ffffffff RSI: ffff81022fc039c0 RDI: ffffffff8074dd00
RBP: ffff81022f093e30 R08: ffffffff808af880 R09: 0000000000000002
R10: 0000000000000001 R11: ffff8100000bed60 R12: ffffffff808b0400
R13: ffffffff808b0410 R14: 0000000000000000 R15: ffffffffffffffff
FS: 0000000000000000(0000) GS:ffff81022f0883c0(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: ffffffffffffffb0 CR3: 0000000000201000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 1, threadinfo ffff81022f092000, task ffff81022f0797d0)
Stack: ffff81022f093e30 0000000000000000 ffffffff808a9100 ffffffff808a9120
00000000ffffffed 0000000000000000 ffff81022f093eb0 ffffffff80414425
ffff81022f093ec0 0000000000000000 000000008074e920 0000000000000246
Call Trace:
[<ffffffff80414425>] ide_device_add_all+0xb27/0xe1b
[<ffffffff807d2884>] ide_generic_init+0x3a/0x3e
[<ffffffff807b473b>] kernel_init+0x175/0x2e7
[<ffffffff8020bff8>] child_rip+0xa/0x12
[<ffffffff80372350>] ? acpi_ds_init_one_object+0x0/0x88
[<ffffffff807b45c6>] ? kernel_init+0x0/0x2e7
[<ffffffff8020bfee>] ? child_rip+0x0/0x12
Code: 89 03 49 8b 45 18 48 89 18 48 39 1b 75 04 0f 0b eb fe fe 05 51 51 38 00 fb eb 5b 48 8b 83 28 07 00 00 83 ca ff 48 83 e8 70 74 0e <48> 8b 40 20 48 8b 80 88 00 00 00 8b 50 04 48 8b 3d 79 ff 2f 00
RIP [<ffffffff80413642>] init_irq+0x188/0x444
RSP <ffff81022f093e00>
CR2: ffffffffffffffb0
---[ end trace 9010a4c8c4ba608a ]---
(gdb) p init_irq
$1 = {int (ide_hwif_t *)} 0xffffffff804134ba <init_irq>
(gdb) p/x 0xffffffff804134ba+0x188
$2 = 0xffffffff80413642
(gdb) l *0xffffffff80413642
0xffffffff80413642 is in init_irq (include/linux/ide.h:1311).
1306 print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 2, id, 512, 0);
1307 }
1308
1309 static inline int hwif_to_node(ide_hwif_t *hwif)
1310 {
1311 struct pci_dev *dev = to_pci_dev(hwif->dev);
1312 return dev ? pcibus_to_node(dev->bus) : -1;
1313 }
1314
1315 static inline ide_drive_t *ide_get_paired_drive(ide_drive_t *drive)
(gdb)
(gdb) p ide_device_add_all
$1 = {int (u8 *, const struct ide_port_info *)} 0xffffffff804138fe <ide_device_add_all>
(gdb) p/x 0xffffffff804138fe
$2 = 0xffffffff804138fe
(gdb) l *0xffffffff804138fe
0xffffffff804138fe is in ide_device_add_all (drivers/ide/ide-probe.c:1372).
1367 hwif->cbl = hwif->cable_detect(hwif);
1368 }
1369 }
1370
1371 int ide_device_add_all(u8 *idx, const struct ide_port_info *d)
1372 {
1373 ide_hwif_t *hwif, *mate = NULL;
1374 int i, rc = 0;
1375
1376 for (i = 0; i < MAX_HWIFS; i++) {
(gdb)
--
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.
WARNING: multiple messages have this Message-ID (diff)
From: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
To: LKML <linux-kernel@vger.kernel.org>,
linux-ide@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>,
ananth@in.ibm.com, Andy Whitcroft <apw@shadowen.org>,
Balbir Singh <balbir@linux.vnet.ibm.com>
Subject: [BUG] 2.6.24-mm1 and 2.6.24-git13 kernel panic's while bootup at ide_device_add_all
Date: Tue, 05 Feb 2008 13:33:49 +0530 [thread overview]
Message-ID: <47A81865.9000506@linux.vnet.ibm.com> (raw)
Hi,
The kernel bootup panics with the 2.6.24-mm1 and 2.6.24-git13 kernel
while defconfig compiled in for x86_64 (Intel(R) Xeon) box
BUG: unable to handle kernel paging request at ffffffffffffffb0
IP: [<ffffffff80413642>] init_irq+0x188/0x444
PGD 203067 PUD 204067 PMD 0
Oops: 0000 [1] SMP
CPU 2
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.24 #1
RIP: 0010:[<ffffffff80413642>] [<ffffffff80413642>] init_irq+0x188/0x444
RSP: 0018:ffff81022f093e00 EFLAGS: 00010287
RAX: ffffffffffffff90 RBX: ffffffff808a9100 RCX: 0000000000000000
RDX: 00000000ffffffff RSI: ffff81022fc039c0 RDI: ffffffff8074dd00
RBP: ffff81022f093e30 R08: ffffffff808af880 R09: 0000000000000002
R10: 0000000000000001 R11: ffff8100000bed60 R12: ffffffff808b0400
R13: ffffffff808b0410 R14: 0000000000000000 R15: ffffffffffffffff
FS: 0000000000000000(0000) GS:ffff81022f0883c0(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: ffffffffffffffb0 CR3: 0000000000201000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 1, threadinfo ffff81022f092000, task ffff81022f0797d0)
Stack: ffff81022f093e30 0000000000000000 ffffffff808a9100 ffffffff808a9120
00000000ffffffed 0000000000000000 ffff81022f093eb0 ffffffff80414425
ffff81022f093ec0 0000000000000000 000000008074e920 0000000000000246
Call Trace:
[<ffffffff80414425>] ide_device_add_all+0xb27/0xe1b
[<ffffffff807d2884>] ide_generic_init+0x3a/0x3e
[<ffffffff807b473b>] kernel_init+0x175/0x2e7
[<ffffffff8020bff8>] child_rip+0xa/0x12
[<ffffffff80372350>] ? acpi_ds_init_one_object+0x0/0x88
[<ffffffff807b45c6>] ? kernel_init+0x0/0x2e7
[<ffffffff8020bfee>] ? child_rip+0x0/0x12
Code: 89 03 49 8b 45 18 48 89 18 48 39 1b 75 04 0f 0b eb fe fe 05 51 51 38 00 fb eb 5b 48 8b 83 28 07 00 00 83 ca ff 48 83 e8 70 74 0e <48> 8b 40 20 48 8b 80 88 00 00 00 8b 50 04 48 8b 3d 79 ff 2f 00
RIP [<ffffffff80413642>] init_irq+0x188/0x444
RSP <ffff81022f093e00>
CR2: ffffffffffffffb0
---[ end trace 9010a4c8c4ba608a ]---
(gdb) p init_irq
$1 = {int (ide_hwif_t *)} 0xffffffff804134ba <init_irq>
(gdb) p/x 0xffffffff804134ba+0x188
$2 = 0xffffffff80413642
(gdb) l *0xffffffff80413642
0xffffffff80413642 is in init_irq (include/linux/ide.h:1311).
1306 print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 2, id, 512, 0);
1307 }
1308
1309 static inline int hwif_to_node(ide_hwif_t *hwif)
1310 {
1311 struct pci_dev *dev = to_pci_dev(hwif->dev);
1312 return dev ? pcibus_to_node(dev->bus) : -1;
1313 }
1314
1315 static inline ide_drive_t *ide_get_paired_drive(ide_drive_t *drive)
(gdb)
(gdb) p ide_device_add_all
$1 = {int (u8 *, const struct ide_port_info *)} 0xffffffff804138fe <ide_device_add_all>
(gdb) p/x 0xffffffff804138fe
$2 = 0xffffffff804138fe
(gdb) l *0xffffffff804138fe
0xffffffff804138fe is in ide_device_add_all (drivers/ide/ide-probe.c:1372).
1367 hwif->cbl = hwif->cable_detect(hwif);
1368 }
1369 }
1370
1371 int ide_device_add_all(u8 *idx, const struct ide_port_info *d)
1372 {
1373 ide_hwif_t *hwif, *mate = NULL;
1374 int i, rc = 0;
1375
1376 for (i = 0; i < MAX_HWIFS; i++) {
(gdb)
--
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.
next reply other threads:[~2008-02-05 8:03 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-05 8:03 Kamalesh Babulal [this message]
2008-02-05 8:03 ` [BUG] 2.6.24-mm1 and 2.6.24-git13 kernel panic's while bootup at ide_device_add_all Kamalesh Babulal
2008-02-13 12:42 ` Rafael J. Wysocki
2008-02-13 12:59 ` Kamalesh Babulal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47A81865.9000506@linux.vnet.ibm.com \
--to=kamalesh@linux.vnet.ibm.com \
--cc=akpm@linux-foundation.org \
--cc=ananth@in.ibm.com \
--cc=apw@shadowen.org \
--cc=balbir@l \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.