* [linux-dvb] af9015 problems
[not found] <15a344380802071428h52e652e8u5e0b1e5fd4bfd56e@mail.gmail.com>
@ 2008-02-07 22:34 ` Ysangkok
2008-02-07 22:39 ` Antti Palosaari
0 siblings, 1 reply; 3+ messages in thread
From: Ysangkok @ 2008-02-07 22:34 UTC (permalink / raw)
To: linux-dvb
[-- Attachment #1: Type: text/plain, Size: 7540 bytes --]
Hello,
I've just bought an Sandberg DigiTV USB DVB-T receiver.
I found out using lsusb that it contained an Afatech AF9016.
# lsusb -v -s 5:10
Bus 005 Device 010: ID 15a4:9016
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x15a4
idProduct 0x9016
bcdDevice 2.00
iManufacturer 1 Afatech
iProduct 2 DVB-T
iSerial 3 010101010600001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 71
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.01
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 65
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 16
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
When using the default Ubuntu 2.6.22-14-generic kernel however, the
drivers wasn't loaded.
I downloaded the source tree for af9015 from
http://linuxtv.org/hg/~anttip/af9015/ and compiled it.
I use the firmware from http://af.zsolttech.com/Firmware/?C=S;O=A .
However, now when I plug it in at the drivers load these messages
appear in the kernel log:
[128817.914315] usb 5-4: new high speed USB device using ehci_hcd and address 7
[128818.051067] usb 5-4: configuration #1 chosen from 1 choice
[128818.054993] input: Afatech DVB-T as /class/input/input9
[128818.055067] input: USB HID v1.01 Keyboard [Afatech DVB-T] on
usb-0000:00:10.4-4
[128818.230750] af9015_usb_probe:
[128818.231474] af9015_identify_state: reply:01
[128818.231484] dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick'
in cold state, will try to load a firmware
[128818.258657] dvb-usb: did not find the firmware file.
(dvb-usb-af9015.fw) Please see linux/Documentation/dvb/ for more
details on firmware-problems. (-2)
[128818.259170] dvb_usb_af9015: probe of 5-4:1.0 failed with error -2
[128818.259400] usbcore: registered new interface driver dvb_usb_af9015
[129227.449759] usb 5-4: USB disconnect, address 7
[129358.565659] usb 5-4: new high speed USB device using ehci_hcd and address 8
[129358.702243] usb 5-4: configuration #1 chosen from 1 choice
[129358.702669] af9015_usb_probe:
[129358.702971] af9015_identify_state: reply:01
[129358.702977] dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick'
in cold state, will try to load a firmware
[129358.710768] dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
[129358.710776] af9015_download_firmware:
[129359.784171] af9015: af9015_rw_udev: sending failed: -110 (63/0)
[129360.782966] af9015: af9015_rw_udev: sending failed: -110 (63/0)
[129361.781639] af9015: af9015_rw_udev: sending failed: -110 (63/0)
[129362.780432] af9015: af9015_rw_udev: sending failed: -110 (63/0)
[129363.779245] af9015: af9015_rw_udev: sending failed: -110 (63/0)
[129364.777901] af9015: af9015_rw_udev: sending failed: -110 (63/0)
[129365.776691] af9015: af9015_rw_udev: sending failed: -110 (63/0)
[129366.775363] af9015: af9015_rw_udev: sending failed: -110 (63/0)
[129367.774157] af9015: af9015_rw_udev: sending failed: -110 (36/0)
[129368.772831] af9015: af9015_rw_udev: sending failed: -110 (8/0)
[129369.771622] af9015: af9015_rw_udev: receiving failed: -110
[129369.771633] af9015: af9015_download_firmware: boot failed: -110
[129369.771740] dvb_usb_af9015: probe of 5-4:1.0 failed with error -110
[129394.740270] af9015_usb_probe:
[129395.738915] af9015: af9015_rw_udev: sending failed: -110 (8/0)
[129396.737703] af9015: af9015_rw_udev: receiving failed: -110
[129396.737714] dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick'
in cold state, will try to load a firmware
[129396.741900] dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
[129396.741909] af9015_download_firmware:
[129397.740371] af9015: af9015_rw_udev: sending failed: -110 (63/0)
[129398.739167] af9015: af9015_rw_udev: sending failed: -110 (63/0)
[129399.737838] af9015: af9015_rw_udev: sending failed: -110 (63/0)
[129400.736640] af9015: af9015_rw_udev: sending failed: -110 (63/0)
[129401.735435] af9015: af9015_rw_udev: sending failed: -110 (63/0)
The full log is dmesg is attached.
Sincerely,
Janus Troelsen
[-- Attachment #2: dmesg.out.txt.gz --]
[-- Type: application/x-gzip, Size: 13113 bytes --]
[-- Attachment #3: lspci.out.txt.gz --]
[-- Type: application/x-gzip, Size: 2725 bytes --]
[-- Attachment #4: lshw.out.txt.gz --]
[-- Type: application/x-gzip, Size: 2794 bytes --]
[-- Attachment #5: lsusb.out.txt.gz --]
[-- Type: application/x-gzip, Size: 1781 bytes --]
[-- Attachment #6: Type: text/plain, Size: 150 bytes --]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [linux-dvb] af9015 problems
2008-02-07 22:34 ` [linux-dvb] af9015 problems Ysangkok
@ 2008-02-07 22:39 ` Antti Palosaari
0 siblings, 0 replies; 3+ messages in thread
From: Antti Palosaari @ 2008-02-07 22:39 UTC (permalink / raw)
To: Ysangkok; +Cc: linux-dvb
Ysangkok wrote:
> Hello,
>
> I've just bought an Sandberg DigiTV USB DVB-T receiver.
>
> I found out using lsusb that it contained an Afatech AF9016.
It is AF9015.
Looks like firmware you have tried is bad. Download correct one from here:
http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/
regards
Antti Palosaari
>
> # lsusb -v -s 5:10
>
> Bus 005 Device 010: ID 15a4:9016
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 0 (Defined at Interface level)
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x15a4
> idProduct 0x9016
> bcdDevice 2.00
> iManufacturer 1 Afatech
> iProduct 2 DVB-T
> iSerial 3 010101010600001
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 71
> bNumInterfaces 2
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0x80
> (Bus Powered)
> MaxPower 500mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 4
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 EP 2 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x84 EP 4 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x85 EP 5 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 1
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 3 Human Interface Devices
> bInterfaceSubClass 0 No Subclass
> bInterfaceProtocol 1 Keyboard
> iInterface 0
> HID Device Descriptor:
> bLength 9
> bDescriptorType 33
> bcdHID 1.01
> bCountryCode 0 Not supported
> bNumDescriptors 1
> bDescriptorType 34 Report
> wDescriptorLength 65
> Report Descriptors:
> ** UNAVAILABLE **
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x83 EP 3 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0040 1x 64 bytes
> bInterval 16
> Device Qualifier (for other device speed):
> bLength 10
> bDescriptorType 6
> bcdUSB 2.00
> bDeviceClass 0 (Defined at Interface level)
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> bNumConfigurations 1
> Device Status: 0x0000
> (Bus Powered)
>
>
>
>
>
>
>
> When using the default Ubuntu 2.6.22-14-generic kernel however, the
> drivers wasn't loaded.
>
> I downloaded the source tree for af9015 from
> http://linuxtv.org/hg/~anttip/af9015/ and compiled it.
>
> I use the firmware from http://af.zsolttech.com/Firmware/?C=S;O=A .
>
> However, now when I plug it in at the drivers load these messages
> appear in the kernel log:
> [128817.914315] usb 5-4: new high speed USB device using ehci_hcd and address 7
> [128818.051067] usb 5-4: configuration #1 chosen from 1 choice
> [128818.054993] input: Afatech DVB-T as /class/input/input9
> [128818.055067] input: USB HID v1.01 Keyboard [Afatech DVB-T] on
> usb-0000:00:10.4-4
> [128818.230750] af9015_usb_probe:
> [128818.231474] af9015_identify_state: reply:01
> [128818.231484] dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick'
> in cold state, will try to load a firmware
> [128818.258657] dvb-usb: did not find the firmware file.
> (dvb-usb-af9015.fw) Please see linux/Documentation/dvb/ for more
> details on firmware-problems. (-2)
> [128818.259170] dvb_usb_af9015: probe of 5-4:1.0 failed with error -2
> [128818.259400] usbcore: registered new interface driver dvb_usb_af9015
> [129227.449759] usb 5-4: USB disconnect, address 7
> [129358.565659] usb 5-4: new high speed USB device using ehci_hcd and address 8
> [129358.702243] usb 5-4: configuration #1 chosen from 1 choice
> [129358.702669] af9015_usb_probe:
> [129358.702971] af9015_identify_state: reply:01
> [129358.702977] dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick'
> in cold state, will try to load a firmware
> [129358.710768] dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
> [129358.710776] af9015_download_firmware:
> [129359.784171] af9015: af9015_rw_udev: sending failed: -110 (63/0)
> [129360.782966] af9015: af9015_rw_udev: sending failed: -110 (63/0)
> [129361.781639] af9015: af9015_rw_udev: sending failed: -110 (63/0)
> [129362.780432] af9015: af9015_rw_udev: sending failed: -110 (63/0)
> [129363.779245] af9015: af9015_rw_udev: sending failed: -110 (63/0)
> [129364.777901] af9015: af9015_rw_udev: sending failed: -110 (63/0)
> [129365.776691] af9015: af9015_rw_udev: sending failed: -110 (63/0)
> [129366.775363] af9015: af9015_rw_udev: sending failed: -110 (63/0)
> [129367.774157] af9015: af9015_rw_udev: sending failed: -110 (36/0)
> [129368.772831] af9015: af9015_rw_udev: sending failed: -110 (8/0)
> [129369.771622] af9015: af9015_rw_udev: receiving failed: -110
> [129369.771633] af9015: af9015_download_firmware: boot failed: -110
> [129369.771740] dvb_usb_af9015: probe of 5-4:1.0 failed with error -110
> [129394.740270] af9015_usb_probe:
> [129395.738915] af9015: af9015_rw_udev: sending failed: -110 (8/0)
> [129396.737703] af9015: af9015_rw_udev: receiving failed: -110
> [129396.737714] dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick'
> in cold state, will try to load a firmware
> [129396.741900] dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
> [129396.741909] af9015_download_firmware:
> [129397.740371] af9015: af9015_rw_udev: sending failed: -110 (63/0)
> [129398.739167] af9015: af9015_rw_udev: sending failed: -110 (63/0)
> [129399.737838] af9015: af9015_rw_udev: sending failed: -110 (63/0)
> [129400.736640] af9015: af9015_rw_udev: sending failed: -110 (63/0)
> [129401.735435] af9015: af9015_rw_udev: sending failed: -110 (63/0)
>
>
>
>
>
> The full log is dmesg is attached.
>
> Sincerely,
> Janus Troelsen
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
--
http://palosaari.fi/
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 3+ messages in thread
* [linux-dvb] AF9015 problems
@ 2011-03-20 18:35 Lucio Crusca
0 siblings, 0 replies; 3+ messages in thread
From: Lucio Crusca @ 2011-03-20 18:35 UTC (permalink / raw)
To: linux-dvb
Hello *,
I'm new here, hope to be on the right list. I'm trying to tune a AF9015, but
w_scan finds only 4 tv services, while the same dongle attached to the same
antenna cable, on the same computer, with Windows Media Center finds as much as
135 tv services.
The 4 services it finds are all from the same 205500 KHz transponder. Any clue?
Some details:
# lsusb
...
Bus 002 Device 002: ID 15a4:9016 Afatech Technologies, Inc. AF9015 DVB-T
USB2.0 stick
...
# dmesg
[ 6484.732102] usb 2-2: new high speed USB device using ehci_hcd and address 2
[ 6484.913877] IR NEC protocol handler initialized
[ 6484.915782] IR RC5(x) protocol handler initialized
[ 6484.918307] IR RC6 protocol handler initialized
[ 6484.920723] IR JVC protocol handler initialized
[ 6484.922643] IR Sony protocol handler initialized
[ 6484.925543] lirc_dev: IR Remote Control driver registered, major 250
[ 6484.926765] IR LIRC bridge handler initialized
[ 6485.285760] dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in cold
state, will try to load a firmware
[ 6485.318245] dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
[ 6485.385897] dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in warm
state.
[ 6485.386035] dvb-usb: will pass the complete MPEG2 transport stream to the
software demuxer.
[ 6485.386449] DVB: registering new adapter (Afatech AF9015 DVB-T USB2.0
stick)
[ 6485.404493] af9013: firmware version:4.95.0.0
[ 6485.408621] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
[ 6485.413124] tda18218: NXP TDA18218HN successfully identified.
[ 6485.415018] Registered IR keymap rc-empty
[ 6485.415127] input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1d.7/usb2/2-2/rc/rc0/input13
[ 6485.415208] rc0: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1d.7/usb2/2-2/rc/rc0
[ 6485.415212] dvb-usb: schedule remote query interval to 500 msecs.
[ 6485.415216] dvb-usb: Afatech AF9015 DVB-T USB2.0 stick successfully
initialized and connected.
[ 6485.423782] usbcore: registered new interface driver dvb_usb_af9015
[ 6485.440130] usbcore: registered new interface driver usbhid
[ 6485.440134] usbhid: USB HID core driver
# uname -r
2.6.38-rc6
# lsmod | grep dvb
dvb_usb_af9015 19468 0
dvb_usb 15052 1 dvb_usb_af9015
dvb_core 86023 1 dvb_usb
rc_core 16999 9
ir_lirc_codec,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,dvb_usb_af9015,ir_rc5_decoder,ir_nec_decoder,dvb_usb
# w_scan -c IT -ft -X
w_scan version 20100316 (compiled for DVB API 5.1)
using settings for ITALY
DVB aerial
DVB-T Europe
frontend_type DVB-T, channellist 4
output format czap/tzap/szap/xine
Info: using DVB adapter auto detection.
/dev/dvb/adapter0/frontend0 -> DVB-T "Afatech AF9013 DVB-T": good :-)
Using DVB-T frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.2
frontend Afatech AF9013 DVB-T supports
INVERSION_AUTO
QAM_AUTO
TRANSMISSION_MODE_AUTO
GUARD_INTERVAL_AUTO
HIERARCHY_AUTO
FEC_AUTO
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
Scanning 7MHz frequencies...
177500: (time: 00:00)
184500: (time: 00:03)
191500: (time: 00:05)
198500: (time: 00:08)
205500: (time: 00:10) (time: 00:13) signal ok:
QAM_AUTO f = 205500 kHz I999B7C999D999T999G999Y999
new transponder:
(QAM_64 f = 1600000 kHz I999B8C34D0T8G16Y0)
212500: (time: 00:26)
219500: (time: 00:29)
226500: (time: 00:31)
Scanning 8MHz frequencies...
474000: (time: 00:34)
482000: (time: 00:36)
490000: (time: 00:39)
498000: (time: 00:41)
506000: (time: 00:44)
514000: (time: 00:46)
522000: (time: 00:49)
530000: (time: 00:51)
538000: (time: 00:54)
546000: (time: 00:56)
554000: (time: 00:59)
562000: (time: 01:01)
570000: (time: 01:04)
578000: (time: 01:07)
586000: (time: 01:09)
594000: (time: 01:12)
602000: (time: 01:14)
610000: (time: 01:17)
618000: (time: 01:19)
626000: (time: 01:22)
634000: (time: 01:24)
642000: (time: 01:27) (time: 01:29)
650000: (time: 01:30)
658000: (time: 01:33)
666000: (time: 01:36)
674000: (time: 01:38)
682000: (time: 01:41)
690000: (time: 01:43)
698000: (time: 01:46)
706000: (time: 01:48)
714000: (time: 01:51)
722000: (time: 01:53)
730000: (time: 01:56)
738000: (time: 01:59)
746000: (time: 02:01)
754000: (time: 02:04)
762000: (time: 02:06)
770000: (time: 02:09)
778000: (time: 02:11)
786000: (time: 02:14)
794000: (time: 02:16)
802000: (time: 02:19)
810000: (time: 02:22)
818000: (time: 02:24)
826000: (time: 02:27)
834000: (time: 02:29)
842000: (time: 02:32)
850000: (time: 02:34)
858000: (time: 02:37)
tune to: QAM_AUTO f = 205500 kHz I999B7C999D999T999G999Y999
(time: 02:39) service = Rai 1 (RAI)
service = Rai 2 (RAI)
service = Rai 3 TGR Piemonte (Rai)
service = Rai Radio1 (RAI)
service = Rai Radio2 (RAI)
service = Rai Radio3 (RAI)
service = Rai News (Rai)
tune to: QAM_64 f = 1600000 kHz I999B8C34D0T8G16Y0
(time: 02:53) set_frontend:1703: ERROR: Setting frontend parameters failed
(API v5.x)
: 22 Invalid argument
tune to: QAM_64 f = 1600000 kHz I999B8C34D0T8G16Y0
(time: 02:53) set_frontend:1703: ERROR: Setting frontend parameters failed
(API v5.x)
: 22 Invalid argument
dumping lists (7 services)
Done.
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-03-20 18:36 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <15a344380802071428h52e652e8u5e0b1e5fd4bfd56e@mail.gmail.com>
2008-02-07 22:34 ` [linux-dvb] af9015 problems Ysangkok
2008-02-07 22:39 ` Antti Palosaari
2011-03-20 18:35 [linux-dvb] AF9015 problems Lucio Crusca
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.