Disk schedulers

Disk schedulers

[Lukas Hejtmanek]

Hello,

whom should I blame about disk schedulers?

I have the following setup:
1Gb network
2GB RAM
disk write speed about 20MB/s

If I'm scping file (about 500MB) from the network (which is faster than the
local disk), any process is totally unable to read anything from the local disk
till the scp finishes. It is not caused by low free memory, while scping
I have 500MB of free memory (not cached or buffered).

I tried cfq and anticipatory scheduler, none is different.

-- 
Lukáš Hejtmánek

Re: Disk schedulers

[Tejun Heo]

Lukas Hejtmanek wrote:
> Hello,
> 
> whom should I blame about disk schedulers?
> 
> I have the following setup:
> 1Gb network
> 2GB RAM
> disk write speed about 20MB/s
> 
> If I'm scping file (about 500MB) from the network (which is faster than the
> local disk), any process is totally unable to read anything from the local disk
> till the scp finishes. It is not caused by low free memory, while scping
> I have 500MB of free memory (not cached or buffered).
> 
> I tried cfq and anticipatory scheduler, none is different.
> 

Does deadline help?

-- 
tejun

Re: Disk schedulers

[Lukas Hejtmanek]

On Fri, Feb 15, 2008 at 09:02:31AM +0900, Tejun Heo wrote:
> > till the scp finishes. It is not caused by low free memory, while scping
> > I have 500MB of free memory (not cached or buffered).
> > 
> > I tried cfq and anticipatory scheduler, none is different.
> > 
> 
> Does deadline help?

well, deadline is a little bit better. I'm trying to read from disk opening
maildir with 20000 mails with mutt. If I open that maildir, mutt shows
progress. With cfq or anticipatory scheduler, progress is 0/20000 until scp
finishes. With deadline, progress is 150/20000 after scp finished. So I would
say, it is better but I doubt it is OK.

-- 
Lukáš Hejtmánek

Re: Disk schedulers

[Jan Engelhardt]

On Feb 14 2008 17:21, Lukas Hejtmanek wrote:
>Hello,
>
>whom should I blame about disk schedulers?

Also consider
- DMA (e.g. only UDMA2 selected)
- aging disk

Re: Disk schedulers

[Prakash Punnoor]

[-- Attachment #1: Type: text/plain, Size: 458 bytes --]

On the day of Friday 15 February 2008 Jan Engelhardt hast written:
> On Feb 14 2008 17:21, Lukas Hejtmanek wrote:
> >Hello,
> >
> >whom should I blame about disk schedulers?
>
> Also consider
> - DMA (e.g. only UDMA2 selected)
> - aging disk

Nope, I also reported this problem _years_ ago, but till now much hasn't 
changed. Large writes lead to read starvation.

-- 
(°=                 =°)
//\ Prakash Punnoor /\\
V_/                 \_V

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: Disk schedulers

[Zan Lynx]

[-- Attachment #1: Type: text/plain, Size: 831 bytes --]


On Fri, 2008-02-15 at 15:57 +0100, Prakash Punnoor wrote:
> On the day of Friday 15 February 2008 Jan Engelhardt hast written:
> > On Feb 14 2008 17:21, Lukas Hejtmanek wrote:
> > >Hello,
> > >
> > >whom should I blame about disk schedulers?
> >
> > Also consider
> > - DMA (e.g. only UDMA2 selected)
> > - aging disk
> 
> Nope, I also reported this problem _years_ ago, but till now much hasn't 
> changed. Large writes lead to read starvation.

Yes, I see this often myself.  It's like the disk IO queue (I set mine
to 1024) fills up, and pdflush and friends can stuff write requests into
it much more quickly than any other programs can provide read requests.

CFQ and ionice work very well up until iostat shows average IO queuing
above 1024 (where I set the queue number).
-- 
Zan Lynx <zlynx@acm.org>

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: Disk schedulers

[FD Cami]

On Fri, 15 Feb 2008 10:11:26 -0700
Zan Lynx <zlynx@acm.org> wrote:

> 
> On Fri, 2008-02-15 at 15:57 +0100, Prakash Punnoor wrote:
> > On the day of Friday 15 February 2008 Jan Engelhardt hast written:
> > > On Feb 14 2008 17:21, Lukas Hejtmanek wrote:
> > > >Hello,
> > > >
> > > >whom should I blame about disk schedulers?
> > >
> > > Also consider
> > > - DMA (e.g. only UDMA2 selected)
> > > - aging disk
> > 
> > Nope, I also reported this problem _years_ ago, but till now much hasn't 
> > changed. Large writes lead to read starvation.
> 
> Yes, I see this often myself.  It's like the disk IO queue (I set mine
> to 1024) fills up, and pdflush and friends can stuff write requests into
> it much more quickly than any other programs can provide read requests.
> 
> CFQ and ionice work very well up until iostat shows average IO queuing
> above 1024 (where I set the queue number).

I can confirm that as well.

This is easily reproductible with dd if=/dev/zero of=somefile bs=2048
for example. After a short while, trying to read the disks takes an
awfully long time, even if the dd process is ionice'd.

What is worse is that other drives attached to the same controller become
unresponsive as well.
I use a Dell Perc 5/i (megaraid_sas) with :
* 2 SAS 15000 RPM drives, RAID1 => sda
* 4 SAS 15000 RPM drives, RAID5 => sdb
* 2 SATA 72000 RPM drives, RAID1 => sdc
Using dd or mkfs on sdb or sdc makes sda unresponsive as well.
Is this expected ?

Cheers

Francois

Re: Disk schedulers

[Lukas Hejtmanek]

On Fri, Feb 15, 2008 at 10:11:26AM -0700, Zan Lynx wrote:
> Yes, I see this often myself.  It's like the disk IO queue (I set mine
> to 1024) fills up, and pdflush and friends can stuff write requests into
> it much more quickly than any other programs can provide read requests.
> 
> CFQ and ionice work very well up until iostat shows average IO queuing
> above 1024 (where I set the queue number).

I though that CFQ would maintain IO queues per process and pick up request in
round robin from non-empty queues. Am I wrong? And if wrong, isn't it desired
behavior for desktop?

-- 
Lukáš Hejtmánek

Re: Disk schedulers

[Zdenek Kabelac]

2008/2/15, Zan Lynx <zlynx@acm.org>:
>
> On Fri, 2008-02-15 at 15:57 +0100, Prakash Punnoor wrote:
> > On the day of Friday 15 February 2008 Jan Engelhardt hast written:
> > > On Feb 14 2008 17:21, Lukas Hejtmanek wrote:
> > > >Hello,
> > > >
> > > >whom should I blame about disk schedulers?
> > >
> > > Also consider
> > > - DMA (e.g. only UDMA2 selected)
> > > - aging disk
> >
> > Nope, I also reported this problem _years_ ago, but till now much hasn't
> > changed. Large writes lead to read starvation.
>
> Yes, I see this often myself.  It's like the disk IO queue (I set mine
> to 1024) fills up, and pdflush and friends can stuff write requests into
> it much more quickly than any other programs can provide read requests.
>
> CFQ and ionice work very well up until iostat shows average IO queuing
> above 1024 (where I set the queue number).

I should probably summarize my experience here as well:

I'm using Qemu - inside of it I'm testing some kernel module which is
doing a lot of disk copy operation - its virtual disk has 8GB.  When
my test is started my system starts to feel unresponsive couple times
per minute for nearly 10 minutes - especially if I use some chat tool
like pidgin I'm often left for 5 secs without any visible refresh on
screen (redraw, typed keys,...)  Firefox shows similar symptoms...

Obviously piding has its own responsibility here - because from strace
it's visible it tries to open and read files - that he read already
zillion times before :) - but that's another story.

But I've tried many things - I've started qemu with ionice -c0, used
ionice -c2 for pidgin, tried different io-scheduler, niced qemu,
changed swappiness  to  different values according to various tips &
tricks around the web I could find  and I cannot get properly running
system with my qemu test case because the system feels unresponsive in
some application which needs to touch my drive.

Does anyone have any ideas what should I try/test/check

BTW one interesting things I've noticed is very high kernel IPI number:
i.e.
  77,0% (3794,9)      <kernel IPI> : Rescheduling interrupts

Sometimes this number attacks 10000 barrier.

My machine is 2.2GHz C2D, T61, 2GB - and CPU is 50% idle while machine
freezes - and yes I can move the mouse all the time ;) and no I'm not
out-of-ram

Zdenek

Re: Disk schedulers

[Lukas Hejtmanek]

On Fri, Feb 15, 2008 at 03:42:58PM +0100, Jan Engelhardt wrote:
> Also consider
> - DMA (e.g. only UDMA2 selected)
> - aging disk

it's not the case.

hdparm reports udma5 is used, if it is reliable with libata.

The disk is 3 months old, kernel does not report any errors. And it has never 
been different.

-- 
Lukáš Hejtmánek

Re: Disk schedulers

[Jeffrey E. Hundstad]

Lukas Hejtmanek,

I have to say, that I've heard this subject before, the summary answer 
seems to be, that the kernel can not guess the wishes of the user 100% 
of the time.  If you have a low priority I/O task use ionice(1) to set 
the priority of that task so it doesn't nuke your high priority task.

I have to personal stake in this answer but I can report that for my 
high I/O tasks it does work like a charm.

-- 
Jeffrey Hundstad

Lukas Hejtmanek wrote:
> On Fri, Feb 15, 2008 at 03:42:58PM +0100, Jan Engelhardt wrote:
>   
>> Also consider
>> - DMA (e.g. only UDMA2 selected)
>> - aging disk
>>     
>
> it's not the case.
>
> hdparm reports udma5 is used, if it is reliable with libata.
>
> The disk is 3 months old, kernel does not report any errors. And it has never
> been different.
>
> --
> Lukáš Hejtmánek
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>   

Re: Disk schedulers

[Roger Heflin]

Lukas Hejtmanek wrote:
> On Fri, Feb 15, 2008 at 03:42:58PM +0100, Jan Engelhardt wrote:
>> Also consider
>> - DMA (e.g. only UDMA2 selected)
>> - aging disk
> 
> it's not the case.
> 
> hdparm reports udma5 is used, if it is reliable with libata.
> 
> The disk is 3 months old, kernel does not report any errors. And it has never 
> been different.
> 

A new current ide/sata disk should do around 60mb/second, check the
min/max bps rate listed on the disk companies site, and divide by 8, and
take maybe 80% of that

Also you may consider using the -l option on the scp command to limit
its total usage.

This feature has been around at least 8 years (from 2.2) that high
levels of writes would significantly starve out reads, mainly because
you can queue up 1000's of writes, and a read, when the read
finishes there are another 1000's writes for the next read to
get in line behind, and wait, and this continues until the
writes stop.

                                 Roger

Re: Disk schedulers

[Paulo Marques]

Lukas Hejtmanek wrote:
> [...]
> If I'm scping file (about 500MB) from the network (which is faster than the
> local disk), any process is totally unable to read anything from the local disk
> till the scp finishes. It is not caused by low free memory, while scping
> I have 500MB of free memory (not cached or buffered).

If you want to take advantage of all that memory to buffer disk writes, 
so that the reads can proceed better, you might want to tweak your 
/proc/sys/vm/dirty_ratio amd /proc/sys/vm/dirty_background_ratio to more 
appropriate values. (maybe also dirty_writeback_centisecs and 
dirty_expire_centisecs)

You can read all about those tunables in Documentation/filesystems/proc.txt.

Just my 2 cents,

-- 
Paulo Marques - www.grupopie.com

"Very funny Scotty. Now beam up my clothes."

Re: Disk schedulers

[Lukas Hejtmanek]

On Fri, Feb 15, 2008 at 05:24:52PM +0000, Paulo Marques wrote:
> If you want to take advantage of all that memory to buffer disk writes,  
> so that the reads can proceed better, you might want to tweak your  
> /proc/sys/vm/dirty_ratio amd /proc/sys/vm/dirty_background_ratio to more  
> appropriate values. (maybe also dirty_writeback_centisecs and  
> dirty_expire_centisecs)

I don't feel like to have my whole memory eaten by a single file which is not
to be read again and thus it is pretty useless. Instead, I would like to see
slowdown of scp so that other processes can also access disk. Why is this
possible with kernel process scheduler and not with IO scheduler?

-- 
Lukáš Hejtmánek

Re: Disk schedulers

[Pavel Machek]

Hi!

> whom should I blame about disk schedulers?
> 
> I have the following setup:
> 1Gb network
> 2GB RAM
> disk write speed about 20MB/s
> 
> If I'm scping file (about 500MB) from the network (which is faster than the
> local disk), any process is totally unable to read anything from the local disk
> till the scp finishes. It is not caused by low free memory, while scping
> I have 500MB of free memory (not cached or buffered).
> 
> I tried cfq and anticipatory scheduler, none is different.

Is cat /dev/zero > file enough to reproduce this?

ext3 filesystem?

Will cat /etc/passwd work while machine is unresponsive?
							Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Re: Disk schedulers

[Lukas Hejtmanek]

On Sat, Feb 16, 2008 at 05:20:49PM +0000, Pavel Machek wrote:
> Is cat /dev/zero > file enough to reproduce this?

yes.


> ext3 filesystem?

yes.
 
> Will cat /etc/passwd work while machine is unresponsive?

yes.

while find does not work:
time find /
/
/etc
/etc/manpath.config
/etc/update-manager
/etc/update-manager/release-upgrades
/etc/gshadow-
/etc/inputrc
/etc/openalrc
/etc/bonobo-activation
/etc/bonobo-activation/bonobo-activation-config.xml
/etc/gnome-vfs-2.0
/etc/gnome-vfs-2.0/modules
/etc/gnome-vfs-2.0/modules/obex-module.conf
/etc/gnome-vfs-2.0/modules/extra-modules.conf
/etc/gnome-vfs-2.0/modules/theme-method.conf
/etc/gnome-vfs-2.0/modules/font-method.conf
/etc/gnome-vfs-2.0/modules/default-modules.conf
^C

real	0m7.982s
user	0m0.003s
sys	0m0.000s


i.e., it took 8 seconds to list just 17 dir entries.

It looks like I have this problem:
http://www.linuxinsight.com/first_benchmarks_of_the_ext4_file_system.html#comment-619
(the last comment with title: Sustained writes 2 or more times the amount of
memfree....)

-- 
Lukáš Hejtmánek

Re: Disk schedulers

[Giuliano Pochini]

On Wed, 20 Feb 2008 19:48:42 +0100
Lukas Hejtmanek <xhejtman@ics.muni.cz> wrote:

> On Sat, Feb 16, 2008 at 05:20:49PM +0000, Pavel Machek wrote:
> > Is cat /dev/zero > file enough to reproduce this?
> 
> yes.
> 
> 
> > ext3 filesystem?
> 
> yes.
>  
> > Will cat /etc/passwd work while machine is unresponsive?
> 
> yes.
> 
> while find does not work:
> time find /
> /
> /etc
> /etc/manpath.config
> /etc/update-manager
> /etc/update-manager/release-upgrades
> /etc/gshadow-
> /etc/inputrc
> /etc/openalrc
> /etc/bonobo-activation
> /etc/bonobo-activation/bonobo-activation-config.xml
> /etc/gnome-vfs-2.0
> /etc/gnome-vfs-2.0/modules
> /etc/gnome-vfs-2.0/modules/obex-module.conf
> /etc/gnome-vfs-2.0/modules/extra-modules.conf
> /etc/gnome-vfs-2.0/modules/theme-method.conf
> /etc/gnome-vfs-2.0/modules/font-method.conf
> /etc/gnome-vfs-2.0/modules/default-modules.conf
> ^C
> 
> real	0m7.982s
> user	0m0.003s
> sys	0m0.000s
> 
> 
> i.e., it took 8 seconds to list just 17 dir entries.

It also happens when I'm writing to a slow external disk.
Documentation/block/biodoc.txt says:

"Per-queue granularity unplugging (still a Todo) may help reduce some of
the concerns with just a single tq_disk flush approach. Something like
blk_kick_queue() to unplug a specific queue (right away ?) or optionally,
all queues, is in the plan."

If I understand correctly, there is only one "plug" in common for all
devices. It may explain why when a queue is full, access to other devices
is also blocked.



--
Giuliano.

Re: Disk schedulers

[Linda Walsh]

Lukas Hejtmanek wrote:
> whom should I blame about disk schedulers?
>
> I have the following setup:
> 1Gb network
> 2GB RAM
> disk write speed about 20MB/s
>
> If I'm scping file (about 500MB) from the network (which is faster than the
> local disk), any process is totally unable to read anything from the local disk
> till the scp finishes. It is not caused by low free memory, while scping
> I have 500MB of free memory (not cached or buffered).
>
> I tried cfq and anticipatory scheduler, none is different.
> ----
>   
    You didn't say anything about #processors or speed, nor
did you say anything about your hard disk's raw-io ability.
You also didn't mention what kernel version or whether or not
you were using the new UID-group cpu scheduler in 2.6.24 (which likes
to default to 'on'; not a great choice for single-user, desktop-type
machines, if I understand its grouping policy). 

Are you sure neither end of the copy is cpu-bound on ssh/scp
encrypt/decrypt calculations? It might not just be inability
to read from disk, but low cpu availability.  Scp can be alot
more CPU intensive than you would expect...  Just something to
consider...

Linda

Re: Disk schedulers

[Bill Davidsen]

Linda Walsh wrote:

>    You didn't say anything about #processors or speed, nor
> did you say anything about your hard disk's raw-io ability.
> You also didn't mention what kernel version or whether or not
> you were using the new UID-group cpu scheduler in 2.6.24 (which likes
> to default to 'on'; not a great choice for single-user, desktop-type
> machines, if I understand its grouping policy).
> Are you sure neither end of the copy is cpu-bound on ssh/scp
> encrypt/decrypt calculations? It might not just be inability
> to read from disk, but low cpu availability.  Scp can be alot
> more CPU intensive than you would expect...  Just something to
> consider...
> 
Good point, and may I note that you *can* choose your encryption, I use 
'blowfish' for normal operation, since I have some faitly slow machines 
with a Gbit net between them.

-- 
Bill Davidsen <davidsen@tmr.com>
   "We have more to fear from the bungling of the incompetent than from
the machinations of the wicked."  - from Slashdot

Disk schedulers

[Paresh Nakhe]

[-- Attachment #1.1: Type: text/plain, Size: 336 bytes --]

We are working on a project to improve the disk performance. We saw that the
IO schedulers are implemented as modules.
However, we cannot find them in /proc/modules. Can anyone tell why this is
so.

We want to change a few things in these modules and test the performance by
reinserting them. Are we missing something??

Thanks,
Paresh

[-- Attachment #1.2: Type: text/html, Size: 388 bytes --]

[-- Attachment #2: Type: text/plain, Size: 138 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Re: Disk schedulers

[Pasi Kärkkäinen]

On Fri, Feb 04, 2011 at 06:00:34PM +0530, Paresh Nakhe wrote:
>    We are working on a project to improve the disk performance. We saw that
>    the IO schedulers are implemented as modules.
>    However, we cannot find them in /proc/modules. Can anyone tell why this is
>    so.
> 
>    We want to change a few things in these modules and test the performance
>    by reinserting them. Are we missing something??
> 

IO schedulers (elevators) are *Linux* kernel feature, 
so the question is how did you configure the *Linux* kernel you're using? 

Are we talking about dom0 or domU here?

-- Pasi

Re: Disk schedulers

[Paresh Nakhe]

[-- Attachment #1.1: Type: text/plain, Size: 1142 bytes --]

I was talking about dom0 here. We know that IO schedulers can be switched at
runtime. They are not fixed at compile time configuration.

After going through the code for IO schedulers, we realized that these were
actually modules. If this is the case, we should be able to see them in
/proc/modules which is not happening.

Paresh

On Fri, Feb 4, 2011 at 8:41 PM, Pasi Kärkkäinen <pasik@iki.fi> wrote:

> On Fri, Feb 04, 2011 at 06:00:34PM +0530, Paresh Nakhe wrote:
> >    We are working on a project to improve the disk performance. We saw
> that
> >    the IO schedulers are implemented as modules.
> >    However, we cannot find them in /proc/modules. Can anyone tell why
> this is
> >    so.
> >
> >    We want to change a few things in these modules and test the
> performance
> >    by reinserting them. Are we missing something??
> >
>
> IO schedulers (elevators) are *Linux* kernel feature,
> so the question is how did you configure the *Linux* kernel you're using?
>
> Are we talking about dom0 or domU here?
>
> -- Pasi
>
>


-- 
*What I have is not a dream, because I will make it a reality.*

[-- Attachment #1.2: Type: text/html, Size: 1563 bytes --]

[-- Attachment #2: Type: text/plain, Size: 138 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Re: Disk schedulers

[Ian Campbell]

Please don't top post.

On Fri, 2011-02-04 at 15:34 +0000, Paresh Nakhe wrote:
> I was talking about dom0 here. We know that IO schedulers can be
> switched at runtime. They are not fixed at compile time configuration.
> 
> After going through the code for IO schedulers, we realized that these
> were actually modules. If this is the case, we should be able to see
> them in /proc/modules which is not happening.

/proc/modules is core kernel functionality and I don't see how this
behaviour would differ from native.

Modules don't actually show up in /proc/modules until you load them.
This works for me.

quartz:~# modprobe deadline-iosched
quartz:~# cat /proc/modules 
deadline_iosched 3671 0 - Live 0xf90e0000
nfsd 83866 11 - Live 0xf9098000
exportfs 3143 1 nfsd, Live 0xf8f08000
rtc_cmos 8147 0 - Live 0xf7c62000
rtc_core 14509 1 rtc_cmos, Live 0xf7c35000
rtc_lib 2428 1 rtc_core, Live 0xf7c04000

Ian.

Re: Disk schedulers

[Paresh Nakhe]

[-- Attachment #1.1: Type: text/plain, Size: 1588 bytes --]

On Fri, Feb 4, 2011 at 9:21 PM, Ian Campbell <Ian.Campbell@citrix.com>wrote:

> Please don't top post.
>
> On Fri, 2011-02-04 at 15:34 +0000, Paresh Nakhe wrote:
> > I was talking about dom0 here. We know that IO schedulers can be
> > switched at runtime. They are not fixed at compile time configuration.
> >
> > After going through the code for IO schedulers, we realized that these
> > were actually modules. If this is the case, we should be able to see
> > them in /proc/modules which is not happening.
>
> /proc/modules is core kernel functionality and I don't see how this
> behaviour would differ from native.
>
> Modules don't actually show up in /proc/modules until you load them.
> This works for me.
>
> quartz:~# modprobe deadline-iosched
> quartz:~# cat /proc/modules
> deadline_iosched 3671 0 - Live 0xf90e0000
> nfsd 83866 11 - Live 0xf9098000
> exportfs 3143 1 nfsd, Live 0xf8f08000
> rtc_cmos 8147 0 - Live 0xf7c62000
> rtc_core 14509 1 rtc_cmos, Live 0xf7c35000
> rtc_lib 2428 1 rtc_core, Live 0xf7c04000
>
> Ian.
>
>
>
root@paresh-hp:~# modprobe deadline-iosched
it is not showing the module after lsmod as in your case.

root@paresh-hp:~# rmmod deadline-iosched
ERROR: Module deadline_iosched does not exist in /proc/modules
(same for cfq-iosched)


root@paresh-hp:~# modprobe noop-iosched
FATAL: Module noop_iosched not found.


What could be the reason for this??

Anyways, if we modify the code, create a makefile, compile and load the
module then there should not be any problem right??
Would it give an error saying that we are re-inserting an existing module??

[-- Attachment #1.2: Type: text/html, Size: 2082 bytes --]

[-- Attachment #2: Type: text/plain, Size: 138 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Re: Disk schedulers

[Ian Campbell]

On Fri, 2011-02-04 at 16:23 +0000, Paresh Nakhe wrote:
> What could be the reason for this??

What kernel version are you using? what is your .config? Does this
behave as expected on native?

Ian.

Re: Disk schedulers

[Paresh Nakhe]

[-- Attachment #1.1: Type: text/plain, Size: 622 bytes --]

On Fri, Feb 4, 2011 at 9:58 PM, Ian Campbell <Ian.Campbell@eu.citrix.com>wrote:

> On Fri, 2011-02-04 at 16:23 +0000, Paresh Nakhe wrote:
> > What could be the reason for this??
>
> What kernel version are you using? what is your .config? Does this
> behave as expected on native?
>
> Ian.
>
>
>
I am using 2.6.35 and currently on native machine only.

Part of .config

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y

[-- Attachment #1.2: Type: text/html, Size: 1051 bytes --]

[-- Attachment #2: Type: text/plain, Size: 138 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Re: Disk schedulers

[Ian Campbell]

On Fri, 2011-02-04 at 16:44 +0000, Paresh Nakhe wrote:

> I am using 2.6.35 and currently on native machine only. 

So why did you think xen-devel would be an appropriate forum for this
issue?

> Part of .config
> 
> #
> # IO Schedulers
> #
> CONFIG_IOSCHED_NOOP=y
> CONFIG_IOSCHED_DEADLINE=y
> CONFIG_IOSCHED_CFQ=y

All of which are quite clearly built statically into the kernel and are
not modular.

Please, xen-devel is not an appropriate list to seek help with basic
Linux kernel development issues and/or trouble shooting when not
specifically running under Xen.

Ian.