From: Daniel Schroeder <sec@dschroeder.info>
To: linux-ide@vger.kernel.org
Subject: WD1000FYPS problem
Date: Tue, 26 Feb 2008 14:54:20 +0100 [thread overview]
Message-ID: <47C41A0C.2080405@dschroeder.info> (raw)
hi there,
new WD 1TB disk, esata case, kernel-2.6.24.3, SiI 3132. Turned case
on...disk sounds strange and repetitive and this is the kern.log, two
times "strange sounds" then turned the case off.
<quote>
Feb 26 14:43:45 isla-magica ata3: exception Emask 0x10 SAct 0x0 SErr 0x0
action 0xa frozen
Feb 26 14:43:45 isla-magica ata3: irq_stat 0x00800080, device exchanged
Feb 26 14:43:45 isla-magica ata3: hard resetting link
Feb 26 14:43:55 isla-magica ata3: softreset failed (timeout)
Feb 26 14:43:55 isla-magica ata3: hard resetting link
Feb 26 14:43:58 isla-magica ata3: SATA link up 3.0 Gbps (SStatus 123
SControl 0)
Feb 26 14:43:58 isla-magica ata3.00: ATA-8: WDC WD1000FYPS-01ZKB0,
02.01B01, max UDMA/133
Feb 26 14:43:58 isla-magica ata3.00: 1953525168 sectors, multi 0: LBA48
NCQ (depth 31/32)
Feb 26 14:43:58 isla-magica ata3.00: configured for UDMA/100
Feb 26 14:43:58 isla-magica ata3: EH complete
Feb 26 14:43:58 isla-magica scsi 2:0:0:0: Direct-Access ATA WDC
WD1000FYPS-0 02.0 PQ: 0 ANSI: 5
Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] 1953525168 512-byte
hardware sectors (1000205 MB)
Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Write Protect is off
Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Write cache: enabled, read
cache: enabled, doesn't support DPO or FUA
Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] 1953525168 512-byte
hardware sectors (1000205 MB)
Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Write Protect is off
Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Write cache: enabled, read
cache: enabled, doesn't support DPO or FUA
Feb 26 14:44:04 isla-magica sdc:
Feb 26 14:44:58 isla-magica ata3.00: exception Emask 0x0 SAct 0x1 SErr
0x0 action 0x2 frozen
Feb 26 14:44:58 isla-magica ata3.00: cmd
60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
Feb 26 14:44:58 isla-magica res 40/00:01:09:4f:c2/00:00:00:00:00/00
Emask 0x4 (timeout)
Feb 26 14:44:58 isla-magica ata3.00: status: { DRDY }
Feb 26 14:44:58 isla-magica ata3: hard resetting link
Feb 26 14:45:02 isla-magica ata3: SATA link up 3.0 Gbps (SStatus 123
SControl 0)
Feb 26 14:45:02 isla-magica ata3.00: configured for UDMA/100
Feb 26 14:45:02 isla-magica ata3: EH complete
Feb 26 14:46:02 isla-magica ata3.00: exception Emask 0x0 SAct 0x1 SErr
0x0 action 0x2 frozen
Feb 26 14:46:02 isla-magica ata3.00: cmd
60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
Feb 26 14:46:02 isla-magica res 40/00:01:09:4f:c2/00:00:00:00:00/00
Emask 0x4 (timeout)
Feb 26 14:46:02 isla-magica ata3.00: status: { DRDY }
Feb 26 14:46:02 isla-magica ata3: hard resetting link
Feb 26 14:46:05 isla-magica ata3: SATA link up 3.0 Gbps (SStatus 123
SControl 0)
Feb 26 14:46:05 isla-magica ata3.00: configured for UDMA/100
Feb 26 14:46:05 isla-magica ata3: EH complete
Feb 26 14:46:10 isla-magica ata3.00: exception Emask 0x10 SAct 0x1 SErr
0x80000 action 0xa frozen
Feb 26 14:46:10 isla-magica ata3.00: irq_stat 0x01100010, PHY RDY changed
Feb 26 14:46:10 isla-magica ata3: SError: { 10B8B }
Feb 26 14:46:10 isla-magica ata3.00: cmd
60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
Feb 26 14:46:10 isla-magica res 50/00:00:af:6d:70/00:00:74:00:00/e0
Emask 0x10 (ATA bus error)
Feb 26 14:46:10 isla-magica ata3.00: status: { DRDY }
Feb 26 14:46:10 isla-magica ata3: hard resetting link
Feb 26 14:46:12 isla-magica ata3: SATA link down (SStatus 0 SControl 0)
Feb 26 14:46:12 isla-magica ata3: failed to recover some devices,
retrying in 5 secs
Feb 26 14:46:17 isla-magica ata3: hard resetting link
Feb 26 14:46:19 isla-magica ata3: SATA link down (SStatus 0 SControl 0)
Feb 26 14:46:19 isla-magica ata3: failed to recover some devices,
retrying in 5 secs
Feb 26 14:46:24 isla-magica ata3: hard resetting link
Feb 26 14:46:26 isla-magica ata3: SATA link down (SStatus 0 SControl 0)
Feb 26 14:46:26 isla-magica ata3.00: disabled
Feb 26 14:46:26 isla-magica ata3: EH complete
Feb 26 14:46:26 isla-magica sd 2:0:0:0: [sdc] Result: hostbyte=0x04
driverbyte=0x00
Feb 26 14:46:26 isla-magica end_request: I/O error, dev sdc, sector 0
Feb 26 14:46:26 isla-magica Buffer I/O error on device sdc, logical block 0
Feb 26 14:46:26 isla-magica sd 2:0:0:0: [sdc] Result: hostbyte=0x04
driverbyte=0x00
Feb 26 14:46:26 isla-magica end_request: I/O error, dev sdc, sector 0
Feb 26 14:46:26 isla-magica Buffer I/O error on device sdc, logical block 0
Feb 26 14:46:26 isla-magica unable to read partition table
Feb 26 14:46:26 isla-magica sd 2:0:0:0: [sdc] Attached SCSI disk
Feb 26 14:46:26 isla-magica sd 2:0:0:0: Attached scsi generic sg2 type 0
Feb 26 14:46:26 isla-magica ata_id[11248]: main: HDIO_GET_IDENTITY
failed for '/dev/.tmp-8-32'
</quote>
tia
daniel
next reply other threads:[~2008-02-26 13:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-26 13:54 Daniel Schroeder [this message]
2008-02-26 14:59 ` WD1000FYPS problem Daniel Schroeder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47C41A0C.2080405@dschroeder.info \
--to=sec@dschroeder.info \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.