All of lore.kernel.org
 help / color / mirror / Atom feed
From: Daniel Schroeder <sec@dschroeder.info>
To: linux-ide@vger.kernel.org
Subject: Re: WD1000FYPS problem
Date: Tue, 26 Feb 2008 15:59:50 +0100	[thread overview]
Message-ID: <47C42966.1040209@dschroeder.info> (raw)
In-Reply-To: <47C41A0C.2080405@dschroeder.info>

the hdd is defect, it sounds the same without a connection to the host..

cheers,
daniel

Daniel Schroeder wrote:
> hi there,
> 
> new WD 1TB disk, esata case, kernel-2.6.24.3, SiI 3132. Turned case 
> on...disk sounds strange and repetitive and this is the kern.log, two 
> times "strange sounds" then turned the case off.
> 
> <quote>
> Feb 26 14:43:45 isla-magica ata3: exception Emask 0x10 SAct 0x0 SErr 0x0 
> action 0xa frozen
> Feb 26 14:43:45 isla-magica ata3: irq_stat 0x00800080, device exchanged
> Feb 26 14:43:45 isla-magica ata3: hard resetting link
> Feb 26 14:43:55 isla-magica ata3: softreset failed (timeout)
> Feb 26 14:43:55 isla-magica ata3: hard resetting link
> Feb 26 14:43:58 isla-magica ata3: SATA link up 3.0 Gbps (SStatus 123 
> SControl 0)
> Feb 26 14:43:58 isla-magica ata3.00: ATA-8: WDC WD1000FYPS-01ZKB0, 
> 02.01B01, max UDMA/133
> Feb 26 14:43:58 isla-magica ata3.00: 1953525168 sectors, multi 0: LBA48 
> NCQ (depth 31/32)
> Feb 26 14:43:58 isla-magica ata3.00: configured for UDMA/100
> Feb 26 14:43:58 isla-magica ata3: EH complete
> Feb 26 14:43:58 isla-magica scsi 2:0:0:0: Direct-Access     ATA      WDC 
> WD1000FYPS-0 02.0 PQ: 0 ANSI: 5
> Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] 1953525168 512-byte 
> hardware sectors (1000205 MB)
> Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Write Protect is off
> Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Write cache: enabled, read 
> cache: enabled, doesn't support DPO or FUA
> Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] 1953525168 512-byte 
> hardware sectors (1000205 MB)
> Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Write Protect is off
> Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Write cache: enabled, read 
> cache: enabled, doesn't support DPO or FUA
> Feb 26 14:44:04 isla-magica sdc:
> Feb 26 14:44:58 isla-magica ata3.00: exception Emask 0x0 SAct 0x1 SErr 
> 0x0 action 0x2 frozen
> Feb 26 14:44:58 isla-magica ata3.00: cmd 
> 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
> Feb 26 14:44:58 isla-magica res 40/00:01:09:4f:c2/00:00:00:00:00/00 
> Emask 0x4 (timeout)
> Feb 26 14:44:58 isla-magica ata3.00: status: { DRDY }
> Feb 26 14:44:58 isla-magica ata3: hard resetting link
> Feb 26 14:45:02 isla-magica ata3: SATA link up 3.0 Gbps (SStatus 123 
> SControl 0)
> Feb 26 14:45:02 isla-magica ata3.00: configured for UDMA/100
> Feb 26 14:45:02 isla-magica ata3: EH complete
> Feb 26 14:46:02 isla-magica ata3.00: exception Emask 0x0 SAct 0x1 SErr 
> 0x0 action 0x2 frozen
> Feb 26 14:46:02 isla-magica ata3.00: cmd 
> 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
> Feb 26 14:46:02 isla-magica res 40/00:01:09:4f:c2/00:00:00:00:00/00 
> Emask 0x4 (timeout)
> Feb 26 14:46:02 isla-magica ata3.00: status: { DRDY }
> Feb 26 14:46:02 isla-magica ata3: hard resetting link
> Feb 26 14:46:05 isla-magica ata3: SATA link up 3.0 Gbps (SStatus 123 
> SControl 0)
> Feb 26 14:46:05 isla-magica ata3.00: configured for UDMA/100
> Feb 26 14:46:05 isla-magica ata3: EH complete
> Feb 26 14:46:10 isla-magica ata3.00: exception Emask 0x10 SAct 0x1 SErr 
> 0x80000 action 0xa frozen
> Feb 26 14:46:10 isla-magica ata3.00: irq_stat 0x01100010, PHY RDY changed
> Feb 26 14:46:10 isla-magica ata3: SError: { 10B8B }
> Feb 26 14:46:10 isla-magica ata3.00: cmd 
> 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
> Feb 26 14:46:10 isla-magica res 50/00:00:af:6d:70/00:00:74:00:00/e0 
> Emask 0x10 (ATA bus error)
> Feb 26 14:46:10 isla-magica ata3.00: status: { DRDY }
> Feb 26 14:46:10 isla-magica ata3: hard resetting link
> Feb 26 14:46:12 isla-magica ata3: SATA link down (SStatus 0 SControl 0)
> Feb 26 14:46:12 isla-magica ata3: failed to recover some devices, 
> retrying in 5 secs
> Feb 26 14:46:17 isla-magica ata3: hard resetting link
> Feb 26 14:46:19 isla-magica ata3: SATA link down (SStatus 0 SControl 0)
> Feb 26 14:46:19 isla-magica ata3: failed to recover some devices, 
> retrying in 5 secs
> Feb 26 14:46:24 isla-magica ata3: hard resetting link
> Feb 26 14:46:26 isla-magica ata3: SATA link down (SStatus 0 SControl 0)
> Feb 26 14:46:26 isla-magica ata3.00: disabled
> Feb 26 14:46:26 isla-magica ata3: EH complete
> Feb 26 14:46:26 isla-magica sd 2:0:0:0: [sdc] Result: hostbyte=0x04 
> driverbyte=0x00
> Feb 26 14:46:26 isla-magica end_request: I/O error, dev sdc, sector 0
> Feb 26 14:46:26 isla-magica Buffer I/O error on device sdc, logical block 0
> Feb 26 14:46:26 isla-magica sd 2:0:0:0: [sdc] Result: hostbyte=0x04 
> driverbyte=0x00
> Feb 26 14:46:26 isla-magica end_request: I/O error, dev sdc, sector 0
> Feb 26 14:46:26 isla-magica Buffer I/O error on device sdc, logical block 0
> Feb 26 14:46:26 isla-magica unable to read partition table
> Feb 26 14:46:26 isla-magica sd 2:0:0:0: [sdc] Attached SCSI disk
> Feb 26 14:46:26 isla-magica sd 2:0:0:0: Attached scsi generic sg2 type 0
> Feb 26 14:46:26 isla-magica ata_id[11248]: main: HDIO_GET_IDENTITY 
> failed for '/dev/.tmp-8-32'
> </quote>
> 
> tia
> daniel
> -
> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html


      reply	other threads:[~2008-02-26 14:59 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-02-26 13:54 WD1000FYPS problem Daniel Schroeder
2008-02-26 14:59 ` Daniel Schroeder [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=47C42966.1040209@dschroeder.info \
    --to=sec@dschroeder.info \
    --cc=linux-ide@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.